GX02 Series Ultra-Broadband Capacitor ADVANTAGES APPLICATIONS • Ultra-Broadband performance • Ultra-Low Insertion Loss • Semi-Conductor Data Communications Customers • X5R & X7S Characteristics • Receiver Optical Sub-Assemblies • Excellent Return Loss • Transimpedance Amplifier Customers • Test Equipment Manufacturers The GX Series was developed specifically to address DC blocking issues from ~16KHz (-3dB roll-off) to 40GHz. Most applications will experience resonance-free insertion loss of <0.5dB thru at least 40GHz. Insertion loss at higher frequencies is in part dependent on installation parameters. Using AVX’s patented precision thin film termination process, the part is designed to be completely orientation insensitive with a standard EIA 0402 footprint to minimize board space requirements. Both Ni/Sn and Ni/Au terminations are available to cover a wide range of attachment processes. All GX parts are RoHS compliant. Au terminated units are wire bondable. Users may, therefore, find these devices useful in bypass applications when wire bonding is a necessary part of the manufacturing process. More information can be obtained by contacting the factory or your local AVX representative. GX02 Series – Return Loss (S11) GX02 Series – Insertion Loss (S21) 0 0 -10 -0.4 Magnitude dB Magnitude dB -0.2 -0.6 -0.8 -1 -1.2 -1.4 -1.6 -20 -30 -40 -50 -1.8 (Typical) (Typical) -2 -60 0 10 20 30 40 0 5 10 15 Frequency (GHz) 20 25 30 35 Frequency (GHz) Test Parameters: Rogers RO4350 Board (T = 10 mils); Trace width = 22 mils; Gap = 24 mils; 50 ohm (nominal) characteristic impedance MECHANICAL SPECIFICATIONS 0.508 ± 0.1 (0.020 ± 0.004) .1 ) ± 0 04 16 0.0 1.0 40 ± 0 (0. 0.508 ± 0.1 (0.020 ± 0.004) 14 51 0.0 002) 8 ± ± 0. 2 0.1 005 (0. 40 GX02 Series Ultra-Broadband Capacitor ELECTRICAL SPECIFICATIONS Capacitance Voltage Rating/Operating Temperature Dielectric Withstanding Voltage Insulation Resistance Temperature Coefficient 0.1 μF ± 10% 16 VDC @ 85°C; 10 VDC @ 125°C 250% WVDC 10,000 Meg Ohms @ 25°C; 1,000 Meg Ohms @ 125°C 16 VDC X5R (± 15%); 10 VDC X7S (± 22%) HOW TO ORDER GX 02 YD 104 K A T 2 Style Case Size 02 = 0402 Voltage/Dielectric YD = 16VDC/X5R 10VDC/X7S Capacitance 104 = 0.1μF EIA Cap Code in pF Tolerance K = ±10% Failure Rate A = Std Termination T = Ni-Sn (Standard) 7 = Ni-Au Packaging 2 = 4000 pcs 7" T&R 2-500 = 500 pcs 7" T&R 2-1000 = 1000 pcs 7" T&R 15