AWB7123 1.93 GHz through 1.99 GHz Small-Cell Power Amplifier Module PRELIMINARY DATA SHEET - Rev 1.2 FEATURES • InGaP HBT Technology • -50 dBc ACPR @ + 5 MHz, +24.5 dBm • 30 dB Gain • High Efficiency • Low Transistor Junction Temperature • Internally Matched for a 50 Ω System • Low Profile Miniature Surface Mount Package; Halogen Free and RoHS Compliant • Multi-Carrier Capability APPLICATIONS • WCDMA, HSDPA and LTE Air Interfaces M41 Package 14 Pin 7 mm x 7 mm x 1.3 mm Surface Mount Module • Picocell, Femtocell, Home Nodes • Customer Premises Equipment (CPE) • Data Cards and Terminals PRODUCT DESCRIPTION The AWB7123 is a highly linear, fully matched, power amplifier module designed for picocell, femtocell, and customer premises equipment (CPE) applications. Its high power efficiency and low adjacent channel power levels meet the extremely demanding needs of small cell infrastructure architectures. Designed for WCDMA, HSDPA, and LTE air interfaces operating in the 1.93 GHz to 1.99 GHz band, the AWB7123 delivers up to +24.5 dBm of WCDMA (64 DPCH) power with an ACPR of -50 dBc. It operates from a convenient +4.2 V supply and provides 30 dB of gain. The device is manufactured using an advanced InGaP HBT MMIC technology offering state-of-theart reliability, temperature stability, and ruggedness. The self-contained 7 mm x 7 mm x 1.3 mm surface mount package incorporates RF matching networks optimized for output power, efficiency, and linearity in a 50 Ω system. Supply Voltage RF Input Supply Voltage Matching Network Matching Network Bias Control Power Detector Bias Voltage Detector Output Figure 1: Block Diagram 10/2011 RF Output AWB7123 VREF 1 14 GND GND 2 13 GND GND 3 12 RFOUT VCC1 4 11 VCC2 RFIN 5 10 GND GND 6 9 GND VDET 7 8 GND GND Figure 2: Pinout (X-ray Top View) Table 1: Pin Description 2 PIN NAME DESCRIPTION 1 VREF Reference Voltage 2 GND Ground 3 GND Ground 4 VCC1 Supply Voltage 5 RFIN RF Input 6 GND Ground 7 VDET Detector Voltage 8 GND Ground 9 GND Ground 10 GND Ground 11 VCC2 Supply Voltage 12 RFOUT RF Output 13 GND Ground 14 GND Ground PRELIMINARY DATA SHEET - Rev 1.2 10/2011 AWB7123 ELECTRICAL CHARACTERISTICS Table 2: Absolute Minimum and Maximum Ratings PARAMETER MIN MAX UNIT Supply Voltage (VCC) 0 +5 V Reference Voltage (VREF) 0 +3.5 V RF Output Power (POUT) - +28 dBm Junction Temperature (Tj) - +150 °C -40 +150 °C Storage Temperature (TSTG) Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Table 3: Operating Ranges PARAMETER MIN TYP MAX UNIT Operating Frequency (f) 1930 - 1990 MHz Supply Voltage (VCC) +3.2 +4.2 +4.5 V Reference Voltage (VREF) +2.80 0 +2.85 - +2.90 +0.5 V RF Output Power (POUT) - +24.5 - dBm Case Temperature (TC) -40 - +85 °C COMMENTS PA "on" PA "shut down" The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. 3 PRELIMINARY DATA SHEET - Rev 1.2 10/2011 AWB7123 Table 4: Electrical Specifications (TC = +25 °C, VCC = +4.2 V, VREF = +2.85 V, 50 Ω system) MIN TYP MAX UNIT 28 31 - dB ACPR (1), (2), (3) @ 5 MHz @ 10 MHz - -50 -62 -48 -60 dBc Power-Added Efficiency (1), (2), (3) - 18 - % Thermal Resistance - TBD - C/W Quiescent Current (Icq) - 120 - mA Reference Current - 6.5 - mA through VREF pin Leakage Current - 1.5 5 µA VCC = +5 V, VREF = 0 V Harmonics 2fo 3fo, 4fo - -54 -62 -46 -56 dBc 10 14 - dB PARAMETER Gain(2) Input Return Loss Spurious Output Level (all spurious outputs) Load mismatch stress with no permanent degradation or failure - - -60 dBc 8:1 - - VSWR Notes: (1) ACPR and Efficiency measured at 1960 MHz. (2) POUT = +24.5 dBm. (3) TM1 WCDMA 64DPCH 4 PRELIMINARY DATA SHEET - Rev 1.2 10/2011 COMMENTS Junction to Case POUT +24.5 dBm In-band load VSWR < 5:1 Out-of-band load VSWR < 10:1 Applies over all voltage and temperature operating ranges VCC = +4.2 V, PIN = 0 dBm Applies over full operating temperature range AWB7123 APPLICATION INFORMATION To ensure proper performance, refer to all related Application Notes on the ANADIGICS web site: http://www.anadigics.com Shutdown Mode The power amplifier may be placed in a shutdown mode by applying logic low levels (see Operating Ranges table) to the VREF voltage. VRE F C15 0.1 µF Vcc1 C1* C2* 47µF VRE F C11 1000 pF C3 10 µF GND GND C4 0.1 µF 1000 pF RFI N RFI N 4.7 KΩ VDET R2 100 KΩ Vcc1 C6 R1 GND VDET 1 14 GND 2 13 GND 3 12 RFOUT 4 AWB7123 11 RFOUT Vcc2 GND 5 10 6 9 GND 7 8 GND C7 C8 1000 pF 0.1 µF 0.1 µF * Optional Figure 3: Application Circuit Schematic 5 PRELIMINARY DATA SHEET - Rev 1.2 10/2011 C9* 10 µF C10* 100 µF Vcc2 AWB7123 1 2 3 Figure 4: PCB Footprint 6 PRELIMINARY DATA SHEET - Rev 1.2 10/2011 AWB7123 PACKAGE OUTLINE Figure 5: M41 Package Outline - 14 Pin 7 mm x 7 mm x 1.3 mm Surface Mount Module ANADIGICS logo Pin 1 Identifier Part Number Date Code YY= Year WW= Work Week Marking Code B7123H Figure 6: Branding Specification 7 PRELIMINARY DATA SHEET - Rev 1.2 10/2011 Lot Number Country Code AWB7123 COMPONENT PACKAGING PIN 1 Figure 7: Tape & Reel Packaging Table 5: Tape & Reel Dimensions 8 PACKAGE TYPE TAPE WIDTH POCKET PITCH REEL CAPACITY MAX REEL DIA 7 mm x 7 mm x 1.3 mm 16 mm 12 mm 2500 13" PRELIMINARY DATA SHEET - Rev 1.2 10/2011 AWB7123 ORDERING INFORMATION ORDER NUMBER TEMPERATURE RANGE PACKAGE DESCRIPTION COMPONENT PACKAGING AWB7123HM41P8 -40 C to +85 C Halogen Free RoHS-compliant 14 Pin 7 mm x 7 mm x 1.3 mm Surface Mount Module Tape and Reel, 2500 pieces per Reel o o ANADIGICS 141 Mount Bethel Road Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. warning ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. 9 PRELIMINARY DATA SHEET - Rev 1.2 10/2011