AWB7223 1.930 -1.995 GHz Small-Cell Power Amplifier Module DATA SHEET - Rev 2.0 FEATURES • InGaP HBT Technology • -50 dBc ACPR @ 65 MHz, +27 dBm • 29 dB Gain • High Efficiency • Low Transistor Junction Temperature • Matched for a 50 Ω System • Low Profile Miniature Surface Mount Package; RoHS Compliant • Multi-Carrier Capability APPLICATIONS • WCDMA, HSDPA and LTE Air Interfaces M52 Package 14 Pin 7 mm x 7 mm x 1.3 mm Surface Mount Module • Picocell, Femtocell, Home Nodes • Customer Premises Equipment (CPE) • Data Cards and Terminals PRODUCT DESCRIPTION The AWB7223 is a fully matched, Multi-Chip-Module (MCM) designed for picocell, femtocell, and customer premises equipment (CPE) applications. Its high linearity and efficiency meet the extremely demanding needs of small cell infrastructure architectures. Designed for WCDMA, HSDPA, and LTE air interfaces operating in the 1.930 GHz to 1.995 GHz band, the AWB7223 delivers up to +27 dBm of WCDMA (64 DPCH) power with an ACPR better than -50 dBc. It operates from a convenient +4.5 V supply and provides 29 dB of gain. The device is manufactured using an advanced InGaP HBT MMIC technology offering state-of-the-art reliability, temperature stability, and ruggedness. The self-contained 7 mm x 7 mm x 1.3 mm surface mount package incorporates RF matching networks optimized for output power, efficiency, and linearity in a 50 Ω system. Vcc 1 RF Input Vcc 2 Matching Network Matching Network Bias Network Matching Network Matching Network Bias Network VREF Power Detector VDET Figure 1: Block Diagram 03/2014 RF Output AWB7223 VREF 1 14 GND GND 2 13 GND GND 3 12 RFOUT VCC1 4 11 VCC2 RFIN 5 10 GND GND 6 9 GND VDET 7 8 GND GND Figure 2: Pinout (X-ray Top View) Table 1: Pin Description 2 PIN NAME 1 VREF Reference Voltage 2 GND Ground 3 GND Ground 4 VCC1 Supply Voltage 5 RFIN RF Input 6 GND Ground 7 VDET Detector Output 8 GND Ground 9 GND Ground 10 GND Ground 11 VCC2 Supply Voltage 12 RFOUT RF Output 13 GND Ground 14 GND Ground DESCRIPTION DATA SHEET - Rev 2.0 03/2014 AWB7223 ELECTRICAL CHARACTERISTICS Table 2: Absolute Minimum and Maximum Ratings PARAMETER MIN MAX UNIT Supply Voltage (VCC) 0 +5 V Reference Voltage (VREF) 0 +3.5 V RF Output Power (POUT) - +30 dBm Class 1C Class IV - MSL Rating (3) 4 - Junction Temperature (Tj) - +150 °C -40 +150 °C ESD Rating Human Body Model (1) Charged Device Model (2) Storage Temperature (TSTG) Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Notes: (1) JEDEC JS-001-2010. (2) JEDEC JESD22-C101D. (3) 260 °C peak reflow. Table 3: Operating Ranges PARAMETER MIN TYP MAX UNIT Operating Frequency (f) 1930 - 1995 MHz Supply Voltage (VCC) +3.6 +4.5 +4.65 V Reference Voltage (VREF) +2.75 0 +2.85 - +2.95 +0.5 V RF Output Power (POUT) - +27 - dBm Case Temperature (TC) -40 - +85 °C COMMENTS PA "on" PA "shut down" The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. 3 DATA SHEET - Rev 2.0 03/2014 AWB7223 Table 4: Electrical Specifications (TC = +25 °C, VCC = +4.5 V, VREF = +2.85 V, 50 Ω system) PARAMETER MIN TYP MAX UNIT 27 29 34 dB - -50 -63 -47 -60 dBc 12 14 - % - 12 - °C/W - 795 930 mA Quiescent Current (Icq) 200 275 330 mA Reference Current 12 14 19 mA through VREF pin Leakage Current - 3 10 µA VCC = +5 V, VREF = 0 V Harmonics 2fO 3fO, 4fO - -50 -54 -45 -50 dBc Input Return Loss 15 20 - dB Output Return Loss 15 20 - dBm - +35 - dBm CW tone Gain (2) ACPR (1), (2), (3) @ 5 MHz @ 10 MHz Power-Added Efficiency (1), (2), (3) Thermal Resistance (RJC) (4) Supply Current (1), (2), (3) P1dB Spurious Output Level (all spurious outputs) Load mismatch stress with no permanent degradation or failure 1930 - 1995 MHz Junction to Case total through VCC pins - - -60 dBc POUT ≤ +27 dBm In-band load VSWR < 5:1 Out-of-band load VSWR < 10:1 Applies over all voltage and temperature operating ranges 8:1 - - VSWR VCC = +4.5 V, POUT = +27 dBm Applies over full operating temperature range Notes: (1) ACPR and Efficiency measured at 1960 MHz. (2) POUT = +27 dBm. (3) TM1 WCDMA 64 DPCH. (4) Use only VCC2 (pin 11) current when calculating device junction temperature. 4 COMMENTS DATA SHEET - Rev 2.0 03/2014 AWB7223 APPLICATION INFORMATION To ensure proper performance, refer to all related Application Notes on the ANADIGICS web site: http://www.anadigics.com Shutdown Mode The power amplifier may be placed in a shutdown mode by applying logic low levels (see Operating Ranges table) to the VREF voltage. VREF 0.1uF 1000pF VCC1 TVS Diode 100uF 10uF 0.1uF 1000pF RF Input DETOUT 0.1uF 100KΩ 4.7KΩ VREF 1 14 GND GND 2 13 GND GND 3 12 RFOUT VCC1 4 11 VCC2 RFIN 5 10 GND GND 6 9 GND VDET 7 8 GND AWB7223 RF Output VCC2 1000pF 10uF 100uF 100uF GND at slug Notes: 1. 10uF and 100uF capacitors are optional. 2. Applications that have large supply voltage transients may benefit from the use of TVS diodes. For such applications, recommended TVS diodes are SM05T1G or SMJ5.0A. Figure 3: Application Circuit Schematic 5 0.1uF TVS Diode DATA SHEET - Rev 2.0 03/2014 AWB7223 Figure 4: PCB Footprint 6 DATA SHEET - Rev 2.0 03/2014 AWB7223 PACKAGE OUTLINE Figure 5: M52 Package Outline - 14 Pin 7 mm x 7 mm x 1.3 mm Surface Mount Module ANADIGICS logo Pin 1 Identifier Part Number Date Code YY= Year WW= Work Week Marking Code B7223R Figure 6: Branding Specification 7 DATA SHEET - Rev 2.0 03/2014 Lot Number Country Code AWB7223 COMPONENT PACKAGING PIN 1 Figure 7: Tape & Reel Packaging Table 5: Tape & Reel Dimensions 8 PACKAGE TYPE TAPE WIDTH POCKET PITCH REEL CAPACITY MAX REEL DIA 7 mm x 7 mm x 1.3 mm 16 mm 12 mm 2500 13" DATA SHEET - Rev 2.0 03/2014 AWB7223 ORDERING INFORMATION ORDER NUMBER TEMPERATURE RANGE PACKAGE DESCRIPTION COMPONENT PACKAGING AWB7223RM52P8 -40 oC to +85 oC RoHS-compliant 14 Pin 7 mm x 7 mm x 1.3 mm Surface Mount Module Tape and Reel, 2500 pieces per Reel ANADIGICS, Inc. 141 Mount Bethel Road Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. warning ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. 9 DATA SHEET - Rev 2.0 03/2014