Coating Thickness Tester Dual Technology provides automatic recognition For ferrous and non-ferrous substrates Features: • Automatic substrate recognition • Magnetic induction for ferrous substrates • Eddy current measurement for non-ferrous substrates • Easy-to use menu system • Two measuring modes: Single and Continuous • Two working modes: Direct and Group • Memory stores 400 readings: 80 Direct and 320 Group • User-programmable high/low alarms • Min/Max/Average • One or two point calibration • USB interface includes software • Complete with two AAA batteries, USB cable, software, Calibration Iron, Calibration Aluminum, Precision Standards, and pouch case. Measuring the thickness of automotive paint Specifications Sensor Probe Working Principle Measuring Range Basic Accuracy Resolution Minimum Curvature Radius Minimum Diameter Minimum Thickness Dimensions Weight Ferrous Non-Ferrous Magnetic Induction Eddy Current 0 to 1250μm 0 to 1250μm 0 to 49mils 0 to 49mils ±3% ±3% 0.1μm (0.004mils) 0.1μm (0.004mils) 1.5mm (59.06mils) 3mm (118.1mils) 7mm (275.6mils) 5mm (196.9mils) 0.5mm (19.69mils) 0.3mm (11.81mils) 4.7 x 2.4 x 1.25" (120 x 62 x 32mm) 6.17oz (175g) Ordering Information: CG204 ............Coating Thickness Tester CG204-REF ....Calibration References www.extech.com Specifications subject to change without notice. 3/23/11 - R1 Copyright © 2009 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.