ispLSI 2192VL Data Sheet

®
ispLSI 2192VL
Functional Block Diagram
—
—
—
—
—
8000 PLD Gates
96 I/O Pins, Nine Dedicated Inputs
192 Registers
High Speed Global Interconnect
Wide Input Gating for Fast Counters, State
Machines, Address Decoders, etc.
— Small Logic Block Size for Random Logic
— Pinout Compatible with ispLSI 2096V and 2096VE
Output Routing Pool
A2
A3
A4
Logic
Global Routing Pool (GRP)
Array
D6
D5
D Q
D Q
GLB
D4
D3
D2
A5
D Q
A6
D1
D0
B0 B1 B2 B3 B4 B5 B6 B7
C0 C1 C2 C3 C4 C5 C6 C7
Output Routing Pool
Output Routing Pool
0139/2192VL
®
• HIGH PERFORMANCE E CMOS TECHNOLOGY
Description
fmax = 150 MHz Maximum Operating Frequency
tpd = 6.0 ns Propagation Delay
The ispLSI 2192VL is a High Density Programmable
Logic Device containing 192 Registers, nine Dedicated
Input pins, three Dedicated Clock Input pins, two dedicated Global OE input pins and a Global Routing Pool
(GRP). The GRP provides complete interconnectivity
between all of these elements. The ispLSI 2192VL features in-system programmability through the Boundary
Scan Test Access Port (TAP) and is 100% IEEE 1149.1
Boundary Scan Testable. The ispLSI 2192VL offers nonvolatile reprogrammability of the logic, as well as the
interconnect to provide truly reconfigurable systems.
Electrically Erasable and Reprogrammable
Non-Volatile
100% Tested at Time of Manufacture
Unused Product Term Shutdown Saves Power
• IN-SYSTEM PROGRAMMABLE
— 2.5V In-System Programmability (ISP™) Using
Boundary Scan Test Access Port (TAP)
— Open-Drain Output Option for Flexible Bus Interface
Capability, Allowing Easy Implementation of WiredOR Bus Arbitration Logic
— Increased Manufacturing Yields, Reduced Time-toMarket and Improved Product Quality
— Reprogram Soldered Devices for Faster Prototyping
The basic unit of logic on the ispLSI 2192VL device is the
Generic Logic Block (GLB). The GLBs are labeled A0, A1
.. F7 (see Figure 1). There are a total of 48 GLBs in the
ispLSI 2192VL device. Each GLB is made up of four
macrocells. Each GLB has 18 inputs, a programmable
AND/OR/Exclusive OR array, and four outputs which can
be configured to be either combinatorial or registered.
Inputs to the GLB come from the GRP and dedicated
inputs. All of the GLB outputs are brought back into the
GRP so that they can be connected to the inputs of any
GLB on the device.
• 100% IEEE 1149.1 BOUNDARY SCAN TESTABLE
• THE EASE OF USE AND FAST SYSTEM SPEED OF
PLDs WITH THE DENSITY AND FLEXIBILITY OF FPGAS
—
—
—
—
—
—
D7
D Q
A1
A7
— Interfaces with Standard 3.3V Devices (Inputs and
I/Os are 3.3V Tolerant)
— 175 mA Typical Active Current
—
—
—
—
—
—
Output Routing Pool
E7 E6 E5 E4 E3 E2 E1 E0
A0
• 2.5V LOW VOLTAGE ARCHITECTURE
2
Output Routing Pool
F7 F6 F5 F4 F3 F2 F1 F0
Output Routing Pool
• SuperFAST HIGH DENSITY IN-SYSTEM
PROGRAMMABLE LOGIC
CLK0
CLK1
CLK2
Features
Enhanced Pin Locking Capability
Three Dedicated Clock Input Pins
Synchronous and Asynchronous Clocks
Programmable Output Slew Rate Control
Flexible Pin Placement
Optimized Global Routing Pool Provides Global
Interconnectivity
Copyright © 2002 Lattice Semiconductor Corp. All brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject
to change without notice.
LATTICE SEMICONDUCTOR CORP., 5555 Northeast Moore Ct., Hillsboro, Oregon 97124, U.S.A.
Tel. (503) 268-8000; 1-800-LATTICE; FAX (503) 268-8556; http://www.latticesemi.com
2192vl_04
1
January 2002
Discontinued Product (PCN #02-06). Contact Rochester Electronics for Availability.
www.latticesemi.com/sales/discontinueddevicessales.cfm
2.5V In-System Programmable
SuperFAST™ High Density PLD
Specifications ispLSI 2192VL
Figure 1. ispLSI 2192VL Functional Block Diagram
I/O I/O I/O I/O
95 94 93 92
I/O I/O I/O I/O
91 90 89 88
I/O I/O I/O I/O
87 86 85 84
IN IN
11* 10
I/O I/O I/O I/O
83 82 81 80
I/O I/O I/O I/O
79 78 77 76
I/O I/O I/O I/O
75 74 73 72
I/O I/O I/O I/O
71 70 69 68
I/O I/O I/O I/O
67 66 65 64
IN
9
IN
8
RESET
Input Bus
Input Bus
Output Routing Pool (ORP)
Output Routing Pool (ORP)
GOE 0
Generic
Logic Blocks
(GLBs)
GOE 1
F7
F6
F5
F4
F3
F2
F1
F0
E7
E6
E5
E4
E3
E2
E1
IN 7/TCK
IN 6/TDO
E0
I/O 63
I/O 62
I/O 61
D7
I/O 12
I/O 13
I/O 14
I/O 15
I/O 60
D5
Global
Routing
Pool
(GRP)
A2
A3
A4
D4
D3
D2
A5
D1
A6
D0
I/O 59
I/O 58
I/O 57
lnput Bus
Input Bus
I/O 56
I/O 55
I/O 54
I/O 53
I/O 52
I/O 51
I/O 50
I/O 49
I/O 48
B0
B1
B2
B3
B4
B5
B6
B7
C0
C1
C2
C3
C4
C5
Output Routing Pool (ORP)
Output Routing Pool (ORP)
Input Bus
Input Bus
C6
C7
CLK 2
TDI/IN 0
TMS/IN 1
CLK 1
A7
CLK 0
I/O 8
I/O 9
I/O 10
I/O 11
D6
A1
Output Routing Pool (ORP)
I/O 4
I/O 5
I/O 6
I/O 7
A0
Output Routing Pool (ORP)
I/O 0
I/O 1
I/O 2
I/O 3
Megablock
BSCAN
IN 2* IN 3
I/O I/O I/O I/O
16 17 18 19
I/O I/O I/O I/O
20 21 22 23
I/O I/O I/O I/O
24 25 26 27
I/O I/O I/O I/O
28 29 30 31
IN4 IN 5*
I/O I/O I/O I/O
32 33 34 35
I/O I/O I/O I/O
36 37 38 39
I/O I/O I/O I/O
40 41 42 43
I/O I/O I/O I/O
44 45 46 47
*Note: Dedicated Inputs 2, 5 and 11 are not available with 128-pin packages.
Y0 Y1 Y2
2192VL Block.eps
The 2192VL contains 96 I/O cells. Each I/O cell is directly
connected to an I/O pin and can be individually programmed to be a combinatorial input, output or
bi-directional I/O pin with 3-state control, and the output
drivers can source 4mA or sink 8mA. Each output can be
programmed independently for fast or slow output slew
rate to minimize overall output switching noise. Device
pins can be safely driven to 3.3V signal levels to support
mixed-voltage systems.
Clocks in the ispLSI 2192VL device are selected using
the dedicated clock pins. Three dedicated clock pins (Y0,
Y1, Y2) or an asynchronous clock can be selected on a
GLB basis. The asynchronous or Product Term clock can
be generated in any GLB for its own clock.
Programmable Open-Drain Outputs
In addition to the standard output configuration, the
outputs of the ispLSI 2192VL are individually programmable, either as a standard totem-pole output or an
open-drain output. The totem-pole output drives the
specified Voh and Vol levels, whereas the open-drain
output drives only the specified Vol. The Voh level on the
open-drain output depends on the external loading and
pull-up. This output configuration is controlled by a programmable fuse. The default configuration is a totem-pole
configuration. The open-drain/totem-pole option is selectable through the Lattice software tools.
Eight GLBs, 16 I/O cells, two dedicated inputs and an
ORP are connected together to make a Megablock (see
Figure 1). The outputs of the eight GLBs are connected
to a set of 16 universal I/O cells by the ORPs. Each ispLSI
2192VL device contains six Megablocks.
The GRP has as its inputs, the outputs from all of the
GLBs and all of the inputs from the bi-directional I/O cells.
All of these signals are made available to the inputs of the
GLBs. Delays through the GRP have been equalized to
minimize timing skew.
2
Discontinued Product (PCN #02-06). Contact Rochester Electronics for Availability.
www.latticesemi.com/sales/discontinueddevicessales.cfm
Functional Block Diagram
Specifications ispLSI 2192VL
Supply Voltage Vcc ................................ -0.5 to +4.05V
Input Voltage Applied ............................. -0.5 to +4.05V
Off-State Output Voltage Applied .......... -0.5 to +4.05V
Storage Temperature ................................ -65 to 150°C
Case Temp. with Power Applied .............. -55 to 125°C
Max. Junction Temp. (TJ) with Power Applied ... 150°C
1. Stresses above those listed under the “Absolute Maximum Ratings” may cause permanent damage to the device. Functional
operation of the device at these or at any other conditions above those indicated in the operational sections of this specification
is not implied (while programming, follow the programming specifications).
DC Recommended Operating Condition
PARAMETER
SYMBOL
Commercial
TA = 0°C to + 70°C
Industrial
TA = -40°C to + 85°C
MIN.
MAX.
UNITS
2.3
2.7
V
VCC
Supply Voltage
2.3
2.7
V
VIL
VIH
Input Low Voltage
-0.3
0.7
V
Input High Voltage
1.7
3.6
V
Table 2-0005/2192VL
Capacitance (TA=25°C, f=1.0 MHz)
TYPICAL
UNITS
Dedicated Input Capacitance
8
pf
VCC = 2.5V, VIN = 0.0V
I/O Capacitance
6
pf
VCC = 2.5V, VI/O = 0.0V
Clock and Global Output Enable Capacitance
10
pf
VCC = 2.5V, VY = 0.0V
SYMBOL
C1
C2
C3
PARAMETER
TEST CONDITIONS
Table 2-0006/2192VL
Erase Reprogram Specifications
PARAMETER
MINIMUM
MAXIMUM
UNITS
10,000
—
Cycles
Erase/Reprogram Cycles
Table 2-0008/2192VL
3
Discontinued Product (PCN #02-06). Contact Rochester Electronics for Availability.
www.latticesemi.com/sales/discontinueddevicessales.cfm
Absolute Maximum Ratings 1
Specifications ispLSI 2192VL
Input Pulse Levels
Figure 2. Test Load
GND to VCC
Input Rise and Fall Time
≤ 1.5ns 10% to 90%
Input Timing Reference Levels
VCC/2
Output Timing Reference Levels
VCC/2
VCC
R1
See Figure 2
Output Load
Device
Output
Table 2 - 0003/2192VL
3-state levels are measured 0.15V from
steady-state active level.
Test
Point
R2
CL *
Output Load Conditions (see Figure 2)
TEST CONDITION
R1
R2
CL
250Ω
218Ω
35pF
Active High
∞
218Ω
35pF
Active Low
A
B
C
250Ω
∞
35pF
Active High to Z
at VOH -0.15V
∞
218Ω
5pF
Active Low to Z
at VOL +0.15V
250Ω
∞
5pF
*CL includes Test Fixture and Probe Capacitance.
0213A/2192VL
Table 2-0004/2192VL
DC Electrical Characteristics
Over Recommended Operating Conditions
SYMBOL
VOL
CONDITION
PARAMETER
Output Low Voltage
IOL = 100µA
IOL = 8mA
5
IIL
IIH
IIL-isp
IIL-PU
IOS1
ICC2, 4
Output High Voltage
TYP.
—
—
0.2
—
MAX. UNITS
V
—
0.4
V
VCC - 0.2
—
—
V
IOH = -1mA
2.0
—
—
V
IOH = -4mA
1.8
—
—
V
IOH = -100µA
VOH
3
MIN.
Input or I/O Low Leakage Current
0V ≤ VIN ≤ VIL (Max.)
—
—
-10
µA
Input or I/O High Leakage Current
VIH (min) ≤ VIN ≤ 3.6V
—
—
10
µA
BSCAN Input Pull-Up Current
0V ≤ VIN ≤ VIL
—
—
-150
µA
I/O Active Pull-Up Current
0V ≤ VIN ≤ VIL
—
—
-150
µA
Output Short Circuit Current
VCC = 2.5V, VOUT = 0.5V
—
—
-100
mA
Operating Power Supply Current
VIL = 0.0V, VIH = 2.5V
—
175
—
mA
fCLK = 1 MHz
Table 2-0007/2192VL
1. One output at a time for a maximum duration of one second. VOUT = 0.5V was selected to avoid test
problems by tester ground degradation. Characterized but not 100% tested.
2. Measured using 12 16-bit counters.
3. Typical values are at VCC = 2.5V and TA = 25°C.
4. Maximum ICC varies widely with specific device configuration and operating frequency. Refer to Power Consumption
section of this data sheet and Thermal Management section of the Lattice Semiconductor Data Book or CD-ROM to
estimate maximum ICC.
5. With no pull-up resistors.
4
Discontinued Product (PCN #02-06). Contact Rochester Electronics for Availability.
www.latticesemi.com/sales/discontinueddevicessales.cfm
Switching Test Conditions
Specifications ispLSI 2192VL
Over Recommended Operating Conditions
3
PARAMETER
tpd1
tpd2
fmax
fmax (Ext.)
fmax (Tog.)
tsu1
tco1
th1
tsu2
tco2
th2
tr1
trw1
tptoeen
tptoedis
tgoeen
tgoedis
twh
twl
-135
-150
-100
TEST
COND.
#
A
1
Data Propagation Delay, 4PT Bypass, ORP Bypass
—
6.0
—
7.5
—
10.0
ns
A
2
Data Propagation Delay
—
8.5
—
10.0
—
13.0
ns
DESCRIPTION
1
MIN. MAX. MIN. MAX. MIN. MAX.
2
UNITS
A
3
Clock Frequency with Internal Feedback
150
—
135
—
100
—
MHz
—
4
Clock Frequency with External Feedback ( tsu2 + tco1)
111
—
95
—
77
—
MHz
—
5
Clock Frequency, Max. Toggle
166
—
143
—
100
—
MHz
1
—
6
GLB Reg. Setup Time before Clock, 4 PT Bypass
4.0
—
5.0
—
6.5
—
ns
A
7
GLB Reg. Clock to Output Delay, ORP Bypass
—
4.0
—
4.5
—
5.0
ns
—
8
GLB Reg. Hold Time after Clock, 4 PT Bypass
0.0
—
0.0
—
0.0
—
ns
—
9
GLB Reg. Setup Time before Clock
5.0
—
6.0
—
8.0
—
ns
A
10 GLB Reg. Clock to Output Delay
—
5.0
—
5.5
—
6.0
ns
0.0
—
0.0
—
0.0
—
ns
—
6.0
—
8.0
—
13.5
ns
—
11 GLB Reg. Hold Time after Clock
A
12 Ext. Reset Pin to Output Delay, ORP Bypass
—
13 Ext. Reset Pulse Duration
5.0
—
5.5
—
6.5
—
ns
B
14 Input to Output Enable
—
10.0
—
12.0
—
15.0
ns
C
15 Input to Output Disable
—
10.0
—
12.0
—
15.0
ns
B
16 Global OE Output Enable
—
6.0
—
7.0
—
9.0
ns
C
17 Global OE Output Disable
—
6.0
—
7.0
—
9.0
ns
—
18 External Synchronous Clock Pulse Duration, High
3.0
—
3.5
—
5.0
—
ns
—
19 External Synchronous Clock Pulse Duration, Low
3.0
—
3.5
—
5.0
—
ns
1. Unless noted otherwise, all parameters use a GRP load of four, 20 PTXOR path, ORP and Y0 clock.
2. Standard 16-bit counter using GRP feedback.
3. Reference Switching Test Conditions section.
5
Table 2-0030C/2192VL
Discontinued Product (PCN #02-06). Contact Rochester Electronics for Availability.
www.latticesemi.com/sales/discontinueddevicessales.cfm
External Timing Parameters
Specifications ispLSI 2192VL
Over Recommended Operating Conditions
PARAMETER
2
#
-150
DESCRIPTION
-135
-100
MIN. MAX. MIN. MAX. MIN. MAX.
UNITS
Inputs
tio
tdin
20 Input Buffer Delay
—
0.4
—
1.0
—
0.9
ns
21 Dedicated Input Delay
—
1.5
—
2.2
—
2.7
ns
22 GRP Delay
—
1.1
—
1.2
—
1.8
ns
23 4 Product Term Bypass Path Delay (Combinatorial)
—
2.5
—
3.2
—
5.2
ns
24 4 Product Term Bypass Path Delay (Registered)
—
3.0
—
3.2
—
4.7
ns
25 1 Product Term/XOR Path Delay
—
4.0
—
4.2
—
6.2
ns
26 20 Product Term/XOR Path Delay
—
4.0
—
4.2
—
6.2
ns
27 XOR Adjacent Path Delay 3
—
4.0
—
4.2
—
6.2
ns
28 GLB Register Bypass Delay
—
0.0
—
0.5
—
1.0
ns
29 GLB Register Setup Time before Clock
1.2
—
1.7
—
1.7
—
ns
30 GLB Register Hold Time after Clock
2.8
—
3.3
—
4.8
—
ns
31 GLB Register Clock to Output Delay
—
0.3
—
0.3
—
0.3
ns
32 GLB Register Reset to Output Delay
—
0.6
—
1.1
—
4.3
ns
33 GLB Product Term Reset to Register Delay
—
4.9
—
6.6
—
8.9
ns
GRP
tgrp
GLB
t4ptbpc
t4ptbpr
t1ptxor
t20ptxor
txoradj
tgbp
tgsu
tgh
tgco
tgro
tptre
tptoe
tptck
—
5.0
—
5.8
—
7.4
ns
1.2
4.2
2.1
4.5
2.8
4.8
ns
36 ORP Delay
—
1.4
—
1.5
—
1.5
ns
37 ORP Bypass Delay
—
0.4
—
0.5
—
0.5
ns
38 Output Buffer Delay
—
1.6
—
1.6
—
1.6
ns
39 Output Slew Limited Delay Adder
—
2.0
—
2.0
—
2.0
ns
40 I/O Cell OE to Output Enabled
—
3.5
—
4.0
—
4.9
ns
41 I/O Cell OE to Output Disabled
—
3.5
—
4.0
—
4.9
ns
42 Global Output Enable
—
2.5
—
3.0
—
4.1
ns
43 Clock Delay, Y0 to Global GLB Clock Line (Ref. clock)
1.7
1.7
2.1
2.1
2.6
2.6
ns
44 Clock Delay, Y1 or Y2 to Global GLB Clock Line
1.9
1.9
2.3
2.3
2.8
2.8
ns
—
3.4
—
4.8
—
7.1
ns
34 GLB Product Term Output Enable to I/O Cell Delay
35 GLB Product Term Clock Delay
ORP
torp
torpbp
Outputs
tob
tsl
toen
todis
tgoe
Clocks
tgy0
tgy1/2
Global Reset
tgr
45 Global Reset to GLB
1. Internal Timing Parameters are not tested and are for reference only.
2. Refer to Timing Model in this data sheet for further details.
3. The XOR adjacent path can only be used by hard macros.
6
Table 2-0036/2192VL
Discontinued Product (PCN #02-06). Contact Rochester Electronics for Availability.
www.latticesemi.com/sales/discontinueddevicessales.cfm
Internal Timing Parameters1
Specifications ispLSI 2192VL
I/O Cell
GRP
GLB
ORP
I/O Cell
Feedback
Ded. In
I/O Pin
(Input)
Comb 4 PT Bypass #23
#21
I/O Delay
GRP
Reg 4 PT Bypass
GLB Reg Bypass
ORP Bypass
#20
#22
#24
#28
#37
20 PT
XOR Delays
GLB Reg
Delay
ORP
Delay
#25, 26, 27
D
Q
#38,
39
#36
RST
Reset
#45
#29, 30,
31, 32
Control RE
PTs
OE
#33, 34, CK
35
Y0,1,2
GOE 0
#40, 41
#43, 44
#42
0491/2032
Derivations of tsu, th and tco from the Product Term Clock
tsu
=
=
=
4.0ns =
Logic + Reg su - Clock (min)
(tio + tgrp + t20ptxor) + (tgsu) - (tio + tgrp + tptck(min))
(#20 + #22 + #26) + (#29) - (#20 + #22 + #35)
(0.4 + 1.1 + 4.0) + (1.2) - (0.4 + 1.1 + 1.2)
th
=
=
=
3.0ns =
Clock (max) + Reg h - Logic
(tio + tgrp + tptck(max)) + (tgh) - (tio + tgrp + t20ptxor)
(#20 + #22 + #35) + (#30) - (#20 + #22 + #26)
(0.4 + 1.1 + 4.2) + (2.8) - (0.4 + 1.1 + 4.0)
tco
=
=
=
9.0ns =
Clock (max) + Reg co + Output
(tio + tgrp + tptck(max)) + (tgco) + (torp + tob)
(#20 + #22 + #35) + (#31) + (#36 + #38)
(0.4 + 1.1 + 4.2) + (0.3) + (1.4 + 1.6)
Note: Calculations are based upon timing specifications for the ispLSI 2192VL-150L.
Table 2-0042/2192VL
7
I/O Pin
(Output)
Discontinued Product (PCN #02-06). Contact Rochester Electronics for Availability.
www.latticesemi.com/sales/discontinueddevicessales.cfm
ispLSI 2192VL Timing Model
Specifications ispLSI 2192VL
used. Figure 3 shows the relationship between power
and operating speed.
Power consumption in the ispLSI 2192VL device depends on two primary factors: the speed at which the
device is operating and the number of Product Terms
Figure 3. Typical Device Power Consumption vs fmax
275
ispLSI 2192VL
ICC (mA)
250
225
200
175
150
0
25
50
75
100
125
150
fmax (MHz)
Notes: Configuration of 12 16-bit counters
Typical current at 2.5V, 25° C
ICC can be estimated for the ispLSI 2192VL using the following equation:
ICC = 12 + (# of PTs * 0.44) + (# of nets * max freq * 0.0029)
Where:
# of PTs = Number of Product Terms used in design
# of nets = Number of Signals used in device
Max freq = Highest Clock Frequency to the device (in MHz)
The ICC estimate is based on typical conditions (VCC = 2.5V, room temperature) and an assumption
of two GLB loads on average exists. These values are for estimates only. Since the value of ICC is
sensitive to operating conditions and the program in the device, the actual ICC should be verified.
0127/2192VL
8
Discontinued Product (PCN #02-06). Contact Rochester Electronics for Availability.
www.latticesemi.com/sales/discontinueddevicessales.cfm
Power Consumption
Specifications ispLSI 2192VL
Signal Name
Description
RESET
Active Low (0) Reset pin resets all the registers in the device.
GOE 0, GOE1
Global Output Enable input pins.
Y0, Y1, Y2
Dedicated Clock Input – These clock inputs are connected to one of the clock inputs of all the GLBs in
the device.
BSCAN
Input – Dedicated in-system programming Boundary Scan enable input pin. This pin is brought low to
enable the programming mode. The TMS, TDI, TDO and TCK controls become active.
TDI/IN 0
Input – This pin performs two functions. When BSCAN is logic low, it functions as a serial data input pin
to load programming data into the device. When BSCAN is high, it functions as a dedicated input pin.
TCK/IN 7
Input – This pin performs two functions. When BSCAN is logic low, it functions as a clock pin for the
Boundary Scan state machine. When BSCAN is high, it functions as a dedicated input pin.
TMS/IN 1
Input – This pin performs two functions. When BSCAN is logic low, it functions as a mode control pin for
the Boundary Scan state machine. When BSCAN is high, it functions as a dedicated input pin.
TDO/IN 6
Output/Input – This pin performs two functions. When BSCAN is logic low, it functions as an output pin
to read serial shift register data. When BSCAN is high, it functions as a dedicated input pin.
IN 2-5, IN 8-11
Dedicated Input Pins to the device.
GND
Ground (GND)
VCC
Vcc
NC1
No Connect
I/O
Input/Output Pins – These are the general purpose I/O pins used by the logic array.
1. NC pins are not to be connected to any active signals, VCC or GND.
Signal Locations
Signal Name
128-Pin TQFP
144-Ball fpBGA
RESET
15
G4
GOE 0, GOE 1
80, 17
F12, G2
Y0, Y1, Y2
14, 83, 78
F3, F10, G11
BSCAN
19
F1
TDI/IN 0
20
G3
TMS/IN 1
112
J6
TDO/IN 6
48
C7
TCK/IN 7
77
G12
IN 2-5, IN 8-11
—, 49, 82, —, 84, 113, 13, — M7, J7, F9, G10, E12, B6,
F2, E1
GND
18, 34, 50, 63, 79, 98, 111,
127
A1, A12, D4, D9, E5, E8, F6,
F7, G6, G7, H5, H8, J4, J9,
M1, M12
VCC
2, 16, 31, 47, 66, 81, 95, 114
B1, B12, E6, E7, F5, F8, G5,
G8, H6, H7, L1, L12
NC1
—
K2
1. NC pins are not to be connected to any active signals, VCC or GND.
9
Discontinued Product (PCN #02-06). Contact Rochester Electronics for Availability.
www.latticesemi.com/sales/discontinueddevicessales.cfm
Signal Descriptions
Specifications ispLSI 2192VL
Discontinued Product (PCN #02-06). Contact Rochester Electronics for Availability.
www.latticesemi.com/sales/discontinueddevicessales.cfm
I/O Locations
Signal
128
TQFP
144
fpBGA
Signal
128
TQFP
144
fpBGA
I/O 0
I/O 1
I/O 2
I/O 3
I/O 4
I/O 5
I/O 6
I/O 7
I/O 8
I/O 9
I/O 10
I/O 11
I/O 12
I/O 13
I/O 14
I/O 15
I/O 16
I/O 17
I/O 18
I/O 19
I/O 20
I/O 21
I/O 22
I/O 23
I/O 24
I/O 25
I/O 26
I/O 27
I/O 28
I/O 29
I/O 30
I/O 31
I/O 32
I/O 33
I/O 34
I/O 35
I/O 36
I/O 37
I/O 38
I/O 39
I/O 40
I/O 41
I/O 42
I/O 43
I/O 44
I/O 45
I/O 46
I/O 47
21
22
23
24
25
26
27
28
29
30
32
33
35
36
37
38
39
40
41
42
43
44
45
46
51
52
53
54
55
56
57
58
59
60
61
62
64
65
67
68
69
70
71
72
73
74
75
76
H4
G1
H2
H1
H3
J1
J3
K1
J2
M2
L2
L3
K3
M3
L4
K4
M4
J5
M5
K5
L5
M6
L6
K6
L7
K7
J8
M8
L8
K8
M9
L9
K9
M10
L10
M11
K10
K11
L11
K12
J11
J12
J10
H9
H11
H12
H10
G9
I/O 48
I/O 49
I/O 50
I/O 51
I/O 52
I/O 53
I/O 54
I/O 55
I/O 56
I/O 57
I/O 58
I/O 59
I/O 60
I/O 61
I/O 62
I/O 63
I/O 64
I/O 65
I/O 66
I/O 67
I/O 68
I/O 69
I/O 70
I/O 71
I/O 72
I/O 73
I/O 74
I/O 75
I/O 76
I/O 77
I/O 78
I/O 79
I/O 80
I/O 81
I/O 82
I/O 83
I/O 84
I/O 85
I/O 86
I/O 87
I/O 88
I/O 89
I/O 90
I/O 91
I/O 92
I/O 93
I/O 94
I/O 95
85
86
87
88
89
90
91
92
93
94
96
97
99
100
101
102
103
104
105
106
107
108
109
110
115
116
117
118
119
120
121
122
123
124
125
126
128
1
3
4
5
6
7
8
9
10
11
12
F11
D12
E9
E10
E11
C12
D10
D11
B11
C11
C10
A11
B10
A10
C9
B9
A9
D8
B8
C8
A8
B7
A7
D7
C6
A6
D6
B5
C5
A5
D5
C4
B4
A4
C3
B3
A3
C2
B2
D2
A2
D3
E2
C1
E3
E4
D1
F4
10
Specifications ispLSI 2192VL
128
127
126
125
124
123
122
121
120
119
118
117
116
115
114
113
112
111
110
109
108
107
106
105
104
103
102
101
100
99
98
97
I/O 84
GND
I/O 83
I/O 82
I/O 81
I/O 80
I/O 79
I/O 78
I/O 77
I/O 76
I/O 75
I/O 74
I/O 73
I/O 72
VCC
IN 9
TDO/IN 6
GND
I/O 71
I/O 70
I/O 69
I/O 68
I/O 67
I/O 66
I/O 65
I/O 64
I/O 63
I/O 62
I/O 61
I/O 60
GND
I/O 59
ispLSI 2192VL 128-Pin TQFP Pinout Diagram
ispLSI 2192VL
Top View
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
I/O 58
VCC
I/O 57
I/O 56
I/O 55
I/O 54
I/O 53
I/O 52
I/O 51
I/O 50
I/O 49
I/O 48
IN 8
Y1
IN4
VCC
GOE 0
GND
Y2
TCK/IN 7
I/O 47
I/O 46
I/O 45
I/O 44
I/O 43
I/O 42
I/O 41
I/O 40
I/O 39
I/O 38
VCC
I/O 37
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
I/O 11
GND
I/O 12
I/O 13
I/O 14
I/O 15
I/O 16
I/O 17
I/O 18
I/O 19
I/O 20
I/O 21
I/O 22
I/O 23
VCC
TMS/IN 1
IN3
GND
I/O 24
I/O 25
I/O 26
I/O 27
I/O 28
I/O 29
I/O 30
I/O 31
I/O 32
I/O 33
I/O 34
I/O 35
GND
I/O 36
I/O 85
VCC
I/O 86
I/O 87
I/O 88
I/O 89
I/O 90
I/O 91
I/O 92
I/O 93
I/O 94
I/O 95
IN10
Y0
RESET
VCC
GOE 1
GND
BSCAN
TDI/IN 0
I/O 0
I/O 1
I/O 2
I/O 3
I/O 4
I/O 5
I/O 6
I/O 7
I/O 8
I/O 9
VCC
I/O 10
0124-2192VL
11
Discontinued Product (PCN #02-06). Contact Rochester Electronics for Availability.
www.latticesemi.com/sales/discontinueddevicessales.cfm
Pin Configuration
Specifications ispLSI 2192VL
ispLSI 2192VL 144-Ball fpBGA Signal Diagram
12
11
10
9
8
7
6
5
4
3
2
1
A
GND
I/O
59
I/O
61
I/O
64
I/O
68
I/O
70
I/O
73
I/O
77
I/O
81
I/O
84
I/O
88
GND
A
B
VCC
I/O
56
I/O
60
I/O
63
I/O
66
I/O
69
IN 9
I/O
75
I/O
80
I/O
83
I/O
86
VCC
B
C
I/O
53
I/O
57
I/O
58
I/O
62
I/O
67
TDO/
IN 6
I/O
72
I/O
76
I/O
79
I/O
82
I/O
85
I/O
91
C
D
I/O
49
I/O
55
I/O
54
GND
I/O
65
I/O
71
I/O
74
I/O
78
GND
I/O
89
I/O
87
I/O
94
D
E
IN 8
I/O
52
I/O
51
I/O
50
GND
VCC
VCC
GND
I/O
93
I/O
92
I/O
90
IN 11
E
F
GOE
0
I/O
48
Y1
IN 4
VCC
GND
GND
VCC
I/O
95
Y0
G
TCK/
IN 7
Y2
IN 5
I/O
47
VCC
GND
GND
VCC
RESET
TDI/
IN 0
GOE 1
I/O
1
G
H
I/O
45
I/O
44
I/O
46
I/O
43
GND
VCC
VCC
GND
I/O
0
I/O
4
I/O
2
I/O
3
H
J
I/O
41
I/O
40
I/O
42
GND
I/O
26
IN 3
TMS/
IN 1
I/O
17
GND
I/O
6
I/O
8
I/O
5
J
K
I/O
39
I/O
37
I/O
36
I/O
32
I/O
29
I/O
25
I/O
23
I/O
19
I/O
15
I/O
12
NC1
I/O
7
K
L
VCC
I/O
38
I/O
34
I/O
31
I/O
28
I/O
24
I/O
22
I/O
20
I/O
14
I/O
11
I/O
10
VCC
L
M
GND
I/O
35
I/O
33
I/O
30
I/O
27
IN 2
I/O
21
I/O
18
I/O
16
I/O
13
I/O
9
GND
M
12
11
10
9
8
7
6
5
4
3
2
1
IN 10 BSCAN
144-BGA/2192VL
ispLSI 2192VL
Bottom View
1NCs
are not to be connected to any active signals, VCC or GND.
Note: Ball A1 indicator dot on top side of package.
12
F
Discontinued Product (PCN #02-06). Contact Rochester Electronics for Availability.
www.latticesemi.com/sales/discontinueddevicessales.cfm
Pin Configuration
Specifications ispLSI 2192VL
ispLSI 2192VL - XXX X
XXXX X
Device Family
Grade
Blank = Commercial
Device Number
Package
T128 = 128-Pin TQFP
B144 = 144-Ball fpBGA
Speed
150 = 150 MHz fmax
135 = 135 MHz fmax
100 = 100 MHz fmax
Power
L = Low
0212A/2192VL
ispLSI 2192VL Ordering Information
COMMERCIAL
FAMILY
ispLSI
fmax (MHz)
tpd (ns)
ORDERING NUMBER
PACKAGE
150
6.0
ispLSI 2192VL-150LT128
128-Pin TQFP
150
6.0
ispLSI 2192VL-150LB144
144-Ball fpBGA
135
7.5
ispLSI 2192VL-135LT128
128-Pin TQFP
135
7.5
ispLSI 2192VL-135LB144
144-Ball fpBGA
100
10
ispLSI 2192VL-100LT128
128-Pin TQFP
100
10
ispLSI 2192VL-100LB144
144-Ball fpBGA
Table 2-0041C/2192VL
13
Discontinued Product (PCN #02-06). Contact Rochester Electronics for Availability.
www.latticesemi.com/sales/discontinueddevicessales.cfm
Part Number Description