LFG Series Fuse Block 2D Prints

REV
A
REVISION
DESCRIPTION
502654ERP - RELEASE
DATE
6/21/2011
MRY
59.9 [2.36]
38.1 [1.50]
53.5 [2.11]
28.8 [1.13]
44.6 [1.76]
34.4 [1.36]
25.5 [1.01]
21.7 [0.85]
8.5 [0.34]
19.1 [0.75]
16.4 [0.65]
5.3 [0.21]
9.3 [0.37]
38.1 [1.50]
35.6 [1.40]
15.4 [0.61]
6.5 [0.26]
38.1 [1.50]
R2.6 [0.10]
TYP.
38.1 [1.50]
R2.2 [0.09]
TYP.
76.2 [3.00]
R2.7 [0.11]
TYP.
R2.3 [0.09]
TYP.
4.1 [0.16]
DENOTES CRITICAL CHARACTERISTICS.
DENOTES CPK DIMENSIONS, -MINIMUM CPK VALUE
CPK
DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION
OF PROCESS PERFORMANCE. PROCEDURE FOR MEASUREMENT
AND TRACKING TO BE DEFINED IN
LITTELFUSE INSPECTION INSTRUCTIONS.
DENOTES CP DIMENSIONS, -MINIMUM CP VALUE
MUST BE WITHIN THE DIMENSIONAL LIMITATIONS
SHOWN ON DRAWING AND INITIALLY LOCATED TO
ALLOW FOR MAXIMUM TOOL LIFE.
?
SPECIFICATIONS:
CP
VOLTAGE RATING: 480V
AMPERE RATING: 30 AMPERES
INTERRUPT RATING: 100kA
MATL SPEC
FINISH
DRW
DATE
SUGGESTED TORQUE: 4.0 N-m (35 IN-LBS)
WIRE RANGE: 6-14 AWG Cu ONLY
SOLID/STRANDED
APPROVALS: UL LISTED (FILE NO. E14721)
CSA CERTIFIED (FILE NO. 007316_0_000)
SCALE
3/24/2011
MYORK
TERMINAL TYPE: BOX LUG
B
FINISH GOOD WT
NTS
GRAMS/PIECE
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, DIMENSIONS IN
BRACKETS [ ] ARE INCHES DIMENSIONING AND DO NOT INCLUDE PLATING. TOLERANCING
TO BE INTERPRETED IN ACCORDANCE WITH ANSI Y14.5M-1994
3RD ANGLE
PROJECTION
TITLE
LFG48030-CDINR SERIES OUTLINE
Littelfuse
®
DES PLAINES, ILLINOIS 60016
REVISION
A
DRWG NO.
SHEET 1 OF 1
SERIES
OL-LFG48030CDINR
59.9 [2.36]
53.5 [2.11]
44.6 [1.76]
34.4 [1.36]
38.1 [1.50]
28.8 [1.13]
19.1 [0.75]
8.5 [0.34]
38.1 [1.50]
REVISION
DESCRIPTION
502654ERP - RELEASE MRY
DATE
6/21/2011
25.5 [1.01]
21.7 [0.85]
5.3 [0.21]
REV
A
35.6 [1.40]
15.4 [0.61]
16.4 [0.65]
9.3 [0.37]
6.5 [0.26]
38.1 [1.50]
38.0 [1.50]
R2.6 [0.10]
TYP.
R2.2 [0.09]
TYP.
76.2 [3.00]
R2.7 [0.11]
TYP.
R2.3 [0.09]
TYP.
4.1 [0.16]
DENOTES CRITICAL CHARACTERISTICS.
DENOTES CPK DIMENSIONS, -MINIMUM CPK VALUE
CPK
DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION
OF PROCESS PERFORMANCE. PROCEDURE FOR MEASUREMENT
AND TRACKING TO BE DEFINED IN
LITTELFUSE INSPECTION INSTRUCTIONS.
DENOTES CP DIMENSIONS, -MINIMUM CP VALUE
MUST BE WITHIN THE DIMENSIONAL LIMITATIONS
SHOWN ON DRAWING AND INITIALLY LOCATED TO
ALLOW FOR MAXIMUM TOOL LIFE.
?
SPECIFICATIONS:
VOLTAGE RATING: 480V
CP
AMPERE RATING: 30 AMPERES
MATL SPEC
TERMINAL TYPE: PRESSURE PLATE/ QUICK CONNECT
DRW
SUGGESTED TORQUE: 2.3 N-m (20 IN-LBS)
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, DIMENSIONS IN
BRACKETS [ ] ARE INCHES DIMENSIONING AND DO NOT INCLUDE PLATING. TOLERANCING
TO BE INTERPRETED IN ACCORDANCE WITH ANSI Y14.5M-1994
WIRE RANGE: 10-14 AWG Cu ONLY
SOLID/STRANDED
APPROVALS: UL LISTED (FILE NO. E14721)
CSA CERTIFIED (FILE NO. 007316_0_000)
FINISH
B
INTERRUPT RATING: 100kA
DATE
SCALE
3/24/2011
MYORK
FINISH GOOD WT
NTS
GRAMS/PIECE
3RD ANGLE
PROJECTION
TITLE
LFG48030-PQDINR SERIES OUTLINE
Littelfuse
®
DES PLAINES, ILLINOIS 60016
REVISION
A
DRWG NO.
SHEET 1 OF 1
SERIES
OL-LFG48030PQDINR
REV
A
28.8 [1.13]
8.5 [0.34]
5.3 [0.21]
MRY
59.9 [2.36]
53.5 [2.11]
44.6 [1.76]
34.4 [1.36]
38.1 [1.50]
19.1 [0.75]
REVISION
DESCRIPTION
502654ERP - RELEASE
DATE
6/21/2011
25.5 [1.01]
21.7 [0.85]
16.4 [0.65]
9.3 [0.37]
15.4 [0.61]
6.5 [0.26]
35.6 [1.40]
38.0 [1.50]
38.1 [1.50]
38.1 [1.50]
R2.6 [0.10]
TYP.
R2.2 [0.09]
TYP.
76.2 [3.00]
R2.7 [0.11]
TYP.
R2.3 [0.09]
TYP.
4.1 [0.16]
DENOTES CRITICAL CHARACTERISTICS.
DENOTES CPK DIMENSIONS, -MINIMUM CPK VALUE
CPK
DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION
OF PROCESS PERFORMANCE. PROCEDURE FOR MEASUREMENT
AND TRACKING TO BE DEFINED IN
LITTELFUSE INSPECTION INSTRUCTIONS.
DENOTES CP DIMENSIONS, -MINIMUM CP VALUE
MUST BE WITHIN THE DIMENSIONAL LIMITATIONS
SHOWN ON DRAWING AND INITIALLY LOCATED TO
ALLOW FOR MAXIMUM TOOL LIFE.
?
SPECIFICATIONS:
VOLTAGE RATING: 480V
CP
AMPERE RATING: 30 AMPERES
MATL SPEC
FINISH
B
INTERRUPT RATING: 100kA
DRW
DATE
SCALE
3/24/2011
FINISH GOOD WT
TERMINAL TYPE: SCREW/ QUICK CONNECT
MYORK
SUGGESTED TORQUE: 2.3 N-m (20 IN-LBS)
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, DIMENSIONS IN
BRACKETS [ ] ARE INCHES DIMENSIONING AND DO NOT INCLUDE PLATING. TOLERANCING
TO BE INTERPRETED IN ACCORDANCE WITH ANSI Y14.5M-1994
WIRE RANGE: 10-14 AWG Cu ONLY
SOLID/STRANDED
APPROVALS: UL LISTED (FILE NO. E14721)
CSA CERTIFIED (FILE NO. 007316_0_000)
NTS
GRAMS/PIECE
3RD ANGLE
PROJECTION
TITLE
LFG48030-SQDINR SERIES OUTLINE
Littelfuse
®
DES PLAINES, ILLINOIS 60016
REVISION
A
DRWG NO.
SHEET 1 OF 1
SERIES
OL-LFG48030SQDINR
59.9 [2.36]
53.2 [2.09]
44.9 [1.77]
40.9 [1.61]
34.1 [1.34]
REV
A
REVISION
DESCRIPTION
502654ERP - RELEASE
DATE
6/21/2011
MRY
34.1 [1.34]
25.8 [1.02]
21.8 [0.86]
25.8 [1.02]
15.1 [0.59]
6.8 [0.27]
15.1 [0.59]
8.3 [0.33]
6.8 [0.27]
55.3 [2.18]
95.3 [3.75]
6.8 [0.27]
55.3 [2.18]
35.6 [1.40]
55.3 [2.18]
R2.3 [0.09]
TYP.
R2.3 [0.09]
TYP
R2.3 [0.09]
TYP
DENOTES CRITICAL CHARACTERISTICS.
3.7 [0.15]
DENOTES CPK DIMENSIONS, -MINIMUM CPK VALUE
CPK
DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION
OF PROCESS PERFORMANCE. PROCEDURE FOR MEASUREMENT
AND TRACKING TO BE DEFINED IN
LITTELFUSE INSPECTION INSTRUCTIONS.
DENOTES CP DIMENSIONS, -MINIMUM CP VALUE
MUST BE WITHIN THE DIMENSIONAL LIMITATIONS
SHOWN ON DRAWING AND INITIALLY LOCATED TO
ALLOW FOR MAXIMUM TOOL LIFE.
?
SPECIFICATIONS:
VOLTAGE RATING: 480V
CP
AMPERE RATING: 60 AMPERES
MATL SPEC
TERMINAL TYPE: BOX LUG
DRW
SUGGESTED TORQUE: 2.8 N-m (25 IN-LBS) 6-14AWG
5.6 N-m (50 IN-LBS) 2-4 AWG
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, DIMENSIONS IN
BRACKETS [ ] ARE INCHES DIMENSIONING AND DO NOT INCLUDE PLATING. TOLERANCING
TO BE INTERPRETED IN ACCORDANCE WITH ANSI Y14.5M-1994
WIRE RANGE: 2-14 AWG Cu/Al
SOLID/STRANDED
APPROVALS: UL LISTED (FILE NO. E14721)
CSA CERTIFIED (FILE NO. 007316_0_000)
FINISH
B
INTERRUPT RATING: 100kA
DATE
SCALE
3/24/2011
MYORK
FINISH GOOD WT
NTS
GRAMS/PIECE
3RD ANGLE
PROJECTION
TITLE
LFG48060-CDINR SERIES OUTLINE
Littelfuse
®
DES PLAINES, ILLINOIS 60016
REVISION
A
DRWG NO.
SHEET 1 OF 1
SERIES
OL-LFG48060CDINR
59.9 [2.36]
REV
A
REVISION
DESCRIPTION
502654ERP - RELEASE
DATE
6/21/2011
MRY
53.5 [2.11]
38.1 [1.50]
5.3 [0.21]
76.2 [3.00]
25.5 [1.01]
21.7 [0.85]
16.4 [0.65]
9.3 [0.37]
13.8 [0.54]
38.1 [1.50]
44.6 [1.76]
34.4 [1.36]
28.8 [1.13]
19.1 [0.75]
6.5 [0.26]
38.0 [1.50]
R2.2 [0.09]
TYP.
R2.7 [0.11]
TYP.
35.6 [1.40]
15.4 [0.61]
38.0 [1.50]
R2.6 [0.10] R2.3 [0.09]
TYP.
TYP.
4.1 [0.16]
DENOTES CRITICAL CHARACTERISTICS.
DENOTES CPK DIMENSIONS, -MINIMUM CPK VALUE
CPK
SPECIFICATIONS:
DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION
OF PROCESS PERFORMANCE. PROCEDURE FOR MEASUREMENT
AND TRACKING TO BE DEFINED IN
LITTELFUSE INSPECTION INSTRUCTIONS.
DENOTES CP DIMENSIONS, -MINIMUM CP VALUE
MUST BE WITHIN THE DIMENSIONAL LIMITATIONS
SHOWN ON DRAWING AND INITIALLY LOCATED TO
ALLOW FOR MAXIMUM TOOL LIFE.
?
VOLTAGE RATING: 600V
AMPERE RATING: 15 AMPERES
CP
INTERRUPT RATING: 100kA
TERMINAL TYPE: BOX LUG
SUGGESTED TORQUE: 4.0 N-m (35 IN-LBS)
WIRE RANGE: 6-14 AWG Cu ONLY
SOLID/STRANDED
APPROVALS: UL LISTED (FILE NO. E14721)
CSA CERTIFIED (FILE NO. 007316_0_000)
MATL SPEC
FINISH
DRW
DATE
SCALE
3/22/2011
MYORK
B
FINISH GOOD WT
NTS
GRAMS/PIECE
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, DIMENSIONS IN
BRACKETS [ ] ARE INCHES DIMENSIONING AND DO NOT INCLUDE PLATING. TOLERANCING
TO BE INTERPRETED IN ACCORDANCE WITH ANSI Y14.5M-1994
3RD ANGLE
PROJECTION
TITLE
LFG60015-CDINR SERIES OUTLINE
Littelfuse
®
DES PLAINES, ILLINOIS 60016
REVISION
A
DRWG NO.
SHEET 1 OF 1
SERIES
OL-LFG60015CDINR
59.9 [2.36]
53.5 [2.11]
REV
A
REVISION
DESCRIPTION
502654ERP - RELEASE MRY
DATE
6/21/2011
44.6 [1.76]
38.1 [1.50]
28.8 [1.13]
19.1 [0.75]
13.8 [0.54]
5.3 [0.21]
38.1 [1.50]
34.4 [1.36]
25.5 [1.01]
21.7 [0.85]
16.4 [0.65]
9.3 [0.37]
38.0 [1.50]
R2.2 [0.09]
TYP.
R2.7 [0.10]
TYP.
35.6 [1.40]
15.4 [0.61]
6.5 [0.26]
R2.6 [0.10]
TYP.
38.0 [1.50]
R2.3 [0.09]
TYP.
76.2 [3.00]
4.1 [0.16]
DENOTES CRITICAL CHARACTERISTICS.
DENOTES CPK DIMENSIONS, -MINIMUM CPK VALUE
CPK
DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION
OF PROCESS PERFORMANCE. PROCEDURE FOR MEASUREMENT
AND TRACKING TO BE DEFINED IN
LITTELFUSE INSPECTION INSTRUCTIONS.
DENOTES CP DIMENSIONS, -MINIMUM CP VALUE
MUST BE WITHIN THE DIMENSIONAL LIMITATIONS
SHOWN ON DRAWING AND INITIALLY LOCATED TO
ALLOW FOR MAXIMUM TOOL LIFE.
?
SPECIFICATIONS:
VOLTAGE RATING: 600V
CP
AMPERE RATING: 15 AMPERES
INTERRUPT RATING: 100kA
TERMINAL TYPE: PRESSURE PLATE/ QUICK CONNECT
SUGGESTED TORQUE: 2.3 N-m (20 IN-LBS)
WIRE RANGE: 10-14 AWG Cu ONLY
SOLID/STRANDED
APPROVALS: UL LISTED (FILE NO. E14721)
CSA CERTIFIED (FILE NO. 007316_0_000)
MATL SPEC
FINISH
DRW
DATE
SCALE
3/22/2011
MYORK
B
FINISH GOOD WT
NTS
GRAMS/PIECE
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, DIMENSIONS IN
BRACKETS [ ] ARE INCHES DIMENSIONING AND DO NOT INCLUDE PLATING. TOLERANCING
TO BE INTERPRETED IN ACCORDANCE WITH ANSI Y14.5M-1994
3RD ANGLE
PROJECTION
TITLE
LFG60015-PQDINR SERIES OUTLINE
Littelfuse
®
DES PLAINES, ILLINOIS 60016
REVISION
A
DRWG NO.
SHEET 1 OF 1
SERIES
OL-LFG60015PQDINR
REV
A
REVISION
DESCRIPTION
502654ERP - RELEASE
DATE
6/21/2011
MRY
59.9 [2.36]
44.6 [1.76]
38.1 [1.50]
34.4 [1.36]
28.8 [1.13]
19.1 [0.75]
8.5 [0.34]
5.3 [0.21]
38.1 [1.50]
21.7 [0.85]
25.5 [1.01]
16.4 [0.65]
15.4 [0.61]
R2.2 [0.09]
TYP.
6.5 [0.26]
9.3 [0.37]
38.1 [1.50]
35.6 [1.40]
R2.6 [0.10] 38.0 [1.50]
TYP.
R2.3 [0.09]
TYP.
76.2 [3.00]
R2.7 [0.11]
TYP
4.1 [0.16]
DENOTES CRITICAL CHARACTERISTICS.
DENOTES CPK DIMENSIONS, -MINIMUM CPK VALUE
CPK
DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION
OF PROCESS PERFORMANCE. PROCEDURE FOR MEASUREMENT
AND TRACKING TO BE DEFINED IN
LITTELFUSE INSPECTION INSTRUCTIONS.
DENOTES CP DIMENSIONS, -MINIMUM CP VALUE
MUST BE WITHIN THE DIMENSIONAL LIMITATIONS
SHOWN ON DRAWING AND INITIALLY LOCATED TO
ALLOW FOR MAXIMUM TOOL LIFE.
?
SPECIFICATIONS:
VOLTAGE RATING: 600V
AMPERE RATING: 15 AMPERES
INTERRUPT RATING: 100kA
TERMINAL TYPE: SCREW/ QUICK CONNECT
SUGGESTED TORQUE: 2.3 N-m (20 IN-LBS)
WIRE RANGE: 10-14 AWG Cu ONLY
SOLID/STRANDED
APPROVALS: UL LISTED (FILE NO. E14721)
CSA CERTIFIED (FILE NO. 007316_0_000)
CP
MATL SPEC
FINISH
DRW
DATE
SCALE
3/22/2011
MYORK
B
FINISH GOOD WT
NTS
GRAMS/PIECE
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, DIMENSIONS IN
BRACKETS [ ] ARE INCHES DIMENSIONING AND DO NOT INCLUDE PLATING. TOLERANCING
TO BE INTERPRETED IN ACCORDANCE WITH ANSI Y14.5M-1994
3RD ANGLE
PROJECTION
TITLE
LFG60015-SQDINR SERIES OUTLINE
Littelfuse
®
DES PLAINES, ILLINOIS 60016
REVISION
A
DRWG NO.
SHEET 1 OF 1
SERIES
OL-LFG60015SQDINR
59.9 [2.36]
REV
A
REVISION
DESCRIPTION
502654ERP - RELEASE MRY
DATE
6/21/2011
53.5 [2.11]
44.6 [1.76]
34.4 [1.36]
38.1 [1.50]
19.1 [0.75]
28.8 [1.13]
5.3 [0.21]
38.1 [1.50]
76.2 [3.00]
25.5 [1.01]
21.7 [0.85]
16.4 [0.65]
9.3 [0.37]
13.8 [0.54]
6.5 [0.26]
38.0 [1.50]
R2.2 [0.09]
TYP.
R2.7 [0.11]
TYP.
35.6 [1.40]
15.4 [0.61]
38.0 [1.50]
R2.6 [0.10]
TYP.
R2.3 [0.09]
TYP.
4.1 [0.16]
DENOTES CRITICAL CHARACTERISTICS.
DENOTES CPK DIMENSIONS, -MINIMUM CPK VALUE
CPK
SPECIFICATIONS:
DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION
OF PROCESS PERFORMANCE. PROCEDURE FOR MEASUREMENT
AND TRACKING TO BE DEFINED IN
LITTELFUSE INSPECTION INSTRUCTIONS.
DENOTES CP DIMENSIONS, -MINIMUM CP VALUE
MUST BE WITHIN THE DIMENSIONAL LIMITATIONS
SHOWN ON DRAWING AND INITIALLY LOCATED TO
ALLOW FOR MAXIMUM TOOL LIFE.
?
VOLTAGE RATING: 600V
AMPERE RATING: 20 AMPERES
CP
INTERRUPT RATING: 100kA
TERMINAL TYPE: BOX LUG
SUGGESTED TORQUE: 4.0 N-m (35 IN-LBS)
WIRE RANGE: 6-14 AWG Cu ONLY
SOLID/STRANDED
APPROVALS: UL LISTED (FILE NO. E14721)
CSA CERTIFIED (FILE NO. 007316_0_000)
MATL SPEC
FINISH
DRW
DATE
SCALE
3/22/2011
MYORK
B
FINISH GOOD WT
NTS
GRAMS/PIECE
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, DIMENSIONS IN
BRACKETS [ ] ARE INCHES DIMENSIONING AND DO NOT INCLUDE PLATING. TOLERANCING
TO BE INTERPRETED IN ACCORDANCE WITH ANSI Y14.5M-1994
3RD ANGLE
PROJECTION
TITLE
LFG60020-CDINR SERIES OUTLINE
Littelfuse
®
DES PLAINES, ILLINOIS 60016
REVISION
A
DRWG NO.
SHEET 1 OF 1
OL-LFG60020CDINR Series
59.9 [2.36]
34.4 [1.36]
25.5 [1.01]
21.7 [0.85]
5.3 [0.21]
38.1 [1.50]
35.6 [1.40]
15.4 [0.61]
6.5 [0.26]
16.4 [0.65]
9.3 [0.37]
38.1 [1.50]
R2.2 [0.09]
TYP.
MRY
44.4 [1.75]
28.8 [1.13]
8.5 [0.34]
REVISION
DESCRIPTION
502654ERP - RELEASE
DATE
6/21/2011
53.5 [2.11]
38.1 [1.50]
19.1 [0.75]
REV
A
38.1 [1.50]
R2.6 [0.10]
TYP.
76.2 [3.00]
R2.7 [0.10]
TYP.
R2.3 [0.09]
TYP.
4.1 [0.16]
DENOTES CRITICAL CHARACTERISTICS.
DENOTES CPK DIMENSIONS, -MINIMUM CPK VALUE
CPK
DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION
OF PROCESS PERFORMANCE. PROCEDURE FOR MEASUREMENT
AND TRACKING TO BE DEFINED IN
LITTELFUSE INSPECTION INSTRUCTIONS.
DENOTES CP DIMENSIONS, -MINIMUM CP VALUE
MUST BE WITHIN THE DIMENSIONAL LIMITATIONS
SHOWN ON DRAWING AND INITIALLY LOCATED TO
ALLOW FOR MAXIMUM TOOL LIFE.
?
SPECIFICATIONS:
VOLTAGE RATING: 600V
CP
AMPERE RATING: 20 AMPERES
INTERRUPT RATING: 100kA
TERMINAL TYPE: PRESSURE PLATE/ QUICK CONNECT
SUGGESTED TORQUE: 2.3 N-m (20 IN-LBS)
WIRE RANGE: 10-14 AWG Cu ONLY
SOLID/STRANDED
APPROVALS: UL LISTED (FILE NO. E14721)
CSA CERTIFIED (FILE NO. 007316_0_000)
MATL SPEC
FINISH
DRW
DATE
SCALE
3/24/2011
MYORK
B
FINISH GOOD WT
NTS
GRAMS/PIECE
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, DIMENSIONS IN
BRACKETS [ ] ARE INCHES DIMENSIONING AND DO NOT INCLUDE PLATING. TOLERANCING
TO BE INTERPRETED IN ACCORDANCE WITH ANSI Y14.5M-1994
3RD ANGLE
PROJECTION
TITLE
LFG60020-PQDINR SERIES OUTLINE
Littelfuse
®
DES PLAINES, ILLINOIS 60016
REVISION
A
DRWG NO.
SHEET 1 OF 1
SERIES
OL-LFG60020PQDINR
59.9 [2.36]
REV
A
REVISION
DESCRIPTION
502654ERP - RELEASE MRY
DATE
6/21/2011
53.5 [2.11]
44.6 [1.76]
38.1 [1.50]
28.8 [1.13]
19.1 [0.75]
8.5 [0.34]
5.3 [0.21]
38.1 [1.50]
34.4 [1.36]
21.7 [0.85]
25.5 [1.01]
16.4 [0.65]
15.4 [0.61]
9.3 [0.37]
38.1 [1.50]
R2.2 [0.09]
TYP.
35.6 [1.40]
6.5 [0.26]
R2.6 [0.10]
TYP.
38.0 [1.50]
76.2 [3.00]
R2.7 [0.11]
TYP.
R2.3 [0.09]
TYP.
4.1 [0.16]
DENOTES CRITICAL CHARACTERISTICS.
DENOTES CPK DIMENSIONS, -MINIMUM CPK VALUE
CPK
DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION
OF PROCESS PERFORMANCE. PROCEDURE FOR MEASUREMENT
AND TRACKING TO BE DEFINED IN
LITTELFUSE INSPECTION INSTRUCTIONS.
DENOTES CP DIMENSIONS, -MINIMUM CP VALUE
MUST BE WITHIN THE DIMENSIONAL LIMITATIONS
SHOWN ON DRAWING AND INITIALLY LOCATED TO
ALLOW FOR MAXIMUM TOOL LIFE.
?
SPECIFICATIONS:
VOLTAGE RATING: 600V
AMPERE RATING: 20 AMPERES
INTERRUPT RATING: 100kA
TERMINAL TYPE: SCREW/ QUICK CONNECT
SUGGESTED TORQUE: 2.3 N-m (20 IN-LBS)
WIRE RANGE: 10-14 AWG Cu ONLY
SOLID/STRANDED
APPROVALS: UL LISTED (FILE NO. E14721)
CSA CERTIFIED (FILE NO. 007316_0_000)
CP
MATL SPEC
FINISH
DRW
DATE
SCALE
3/22/2011
MYORK
B
FINISH GOOD WT
NTS
GRAMS/PIECE
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, DIMENSIONS IN
BRACKETS [ ] ARE INCHES DIMENSIONING AND DO NOT INCLUDE PLATING. TOLERANCING
TO BE INTERPRETED IN ACCORDANCE WITH ANSI Y14.5M-1994
3RD ANGLE
PROJECTION
TITLE
LFG60020-SQDINR OUTLINE
Littelfuse
®
DES PLAINES, ILLINOIS 60016
REVISION
A
DRWG NO.
SHEET 1 OF 1
OL-LFG60020SQDINR Series