Clock Oscillators Surface Mount Type KC5032P-P2/ KC5032P-P3 Series LV-PECL/ 3.3V or 2.5V/ 5.0×3.2mm Features • Miniature ceramic package • Highly reliable with seam welding • LV-PECL output • Supply voltage VCC=3.3V • ±25×10−6 available Table 1 Operating Freq. Tol. Temperature Note Code × 10−6 Range (°C) ± 50 0 Standard specifications ± 30 0 to +70 S ± 25 U With only certain ±100 F −40 to +85 frequencies ± 50 G ± 50 −40 to +105 6 RoHS Compliant How to Order KC5032P 125.000 P 3 0 J 00 ① ② ③④⑤⑥ ⑦ ① Type (5.0×3.2mm SMD) ② Output Frequency ③ Output Type (LV-PECL) ④ Supply Voltage (3 : 3.3V or 2 : 2.5V) ⑤ Frequency Tolerance (See Table 1) ⑥ Symmetry/ INH Function (45/ 55%, Stand-by) J : Low Phase Noise E : Standard ⑦ Customer Special Model Suffix (STD Specification is “00”) Packaging (Tape & Reel 1000 pcs./ reel) Specifications Storage Temperature Range T_stg Operating Temperature Range T_use Max. Supply Voltage Supply Voltage Current Consumption Stand-by Current Symmetry Rise/ Fall Time (20% VCC to 80% VCC Maximum Loaded) — VCC ICC I_std SYM Specifications KC5032P-P2 KC5032P-P3 25 to 175 ±50/ −40 to +105°C ±100/ −40 to +85°C ±50/ −40 to +85°C ±50/ 0 to +70°C ±30/ 0 to +70°C ±25/ 0 to +70°C −55 to +125 0 to +70 −40 to +105 −0.5 to +5.0 +2.375 to +2.625 +2.97 to +3.63 90 max. 30 max. 50±5 tr/ tf 0.6 max. Low Level Output VoltageNote2 VOL High Level Output VoltageNote2 VOH Item Symbol Note1 Output Frequency Range fo Frequency Tolerance f_tol Output Load Input Voltage Range Low Level Input Voltage High Level Input Voltage Disable Time Enable Time Start-up Time Deterministic Jitter 1 Sigma Jitter Peak to Peak Jitter VCC −1.810 to VCC −1.405 VCC −1.830 to VCC −1.305 VCC −1.025 to VCC −0.740 VCC −1.085 to VCC −0.880 RL VIN VIL VIH t_dis t_ena t_str DJ JSigma JPK-PK VCC −1.810 to VCC −1.620 VCC −1.830 to VCC −1.555 VCC −1.025 to VCC −0.880 VCC −1.085 to VCC −0.900 50 0 to VCC 30% VCC max. 70% VCC min. 150 max. 10 max. 10 max. 2 max. 4 max. 30 max. Units Conditions MHz ppm Initial tolerance, Operating temperature range, Rated power supply voltage change, Load change, Aging (1 year @25°C), Shock and vibration °C °C Standard Specifications Extend (Option) V V mA µA % 50ohm @crossing point ns 50ohm V V ohm V V ns ms ms ps ps ps @Minimum operating voltage to be 0 sec. Measured with Wavecrest SIA-3000 Note : All electrical characteristics are defined at the maximum load and operating temperature range. Note1: Please contact us for inquiry about operating temperature range, available frequencies and other conditions. Note2: DC characteristic Dimensions (Unit: mm) 0.6 1.1 0.7 0.7 #4 #5 #6 #3 #2 #1 0.9 Plating: Ni+Au Tolerance: ±0.2 Pad Connections INH NC Case GND Output Complementary Output VCC INH Function Pad1 Pad4/ Pad5 (Output) Open Active "H" Level Active "L" Level High Z (No-Oscillation) 1.6 #1 #2 #3 #4 #5 #6 0.64 0.63 (Unit: mm) 2.6 3.2 0.5 Recommended Land Pattern 1.0 5.0 1.3 1.3 Note: A capacitor of value 0.01μF and 10μF between VCC and GND is recommended.