Clock Oscillators Surface Mount Type KC7050P-L2/ KC7050P-L3 Series LVDS/ 3.3V or 2.5V/ 7.0×5.0mm Features • Miniature ceramic package • Highly reliable with seam welding • LVDS output • Supply voltage VCC=3.3V • ±25×10−6 available Table 1 Operating Freq. Tol. Temperature Note Code × 10−6 Range (°C) ± 50 0 Standard specifications ± 30 0 to +70 S ± 25 U With only certain ±100 F −40 to +85 frequencies ± 50 G ± 50 −40 to +105 6 RoHS Compliant How to Order KC7050P 125.000 L 3 0 J 00 ① ② ③④⑤⑥ ⑦ ① Type (7.0×5.0mm SMD) ② Output Frequency ③ Output Type (LVDS) ④ Supply Voltage (2 : 2.5V or 3 : 3.3V) ⑤ Frequency Tolerance (See Table 1) ⑥ Symmetry/ INH Function (45/ 55%, Stand-by) J : Low Phase Noise E : Standard ⑦ Customer Special Model Suffix (STD Specification is “00”) Packaging (Tape & Reel 1000 pcs./ reel) Specifications Item Symbol Output Frequency RangeNote1 fo Frequency Tolerance f_tol Storage Temperature Range T_stg Operating Temperature Range T_use Specifications KC7050P-L2 KC7050P-L3 25 to 175 ±50/ −40 to +105°C ±100/ −40 to +85°C ±50/ −40 to +85°C ±50/ 0 to +70°C ±30/ 0 to +70°C ±25/ 0 to +70°C −55 to +125 0 to +70 −40 to +105 −0.5 to +5.0 +2.375 to +2.625 +2.97 to +3.63 70 max. 30 max. 50±5 Max. Supply Voltage — Supply Voltage VCC Current Consumption ICC Stand-by Current I_std Symmetry SYM Rise/ Fall Time (20% VCC to 80% VCC Maximum tr/ tf Loaded) Note2 Low Level Output Voltage VOL VOH High Level Output VoltageNote2 Diffrentical Output VoltageNote2 VOD Diffrentical Output Voltage ErrorNote2 dVOD Offset Voltage VOS Offset Voltage Error dVOS Output Load RL Input Voltage Range VIN Low Level Input Voltage VIL High Level Input Voltage VIH Disable Time t_dis Enable Time t_ena Start-up Time t_str Deterministic Jitter DJ 1 Sigma Jitter JSigma Peak to Peak Jitter JPK-PK Units Conditions MHz ppm Initial tolerance, Operating temperature range, Rated power supply voltage change, Load change, Aging (1 year @25°C), Shock and vibration °C °C Standard Specifications Extend (Option) V V mA µA % 100ohm @crossing point 0.6 max. ns 100ohm 0.9 min. Typ.:1.1 1.6 max. Typ.:1.43 247 to 454 Typ.:330 50 max. 1.125 to 1.375 50 max. 100 0 to VCC 30% VCC max. 70% VCC min. 200 max. 10 max. 10 max. 2 max. 4 max. 30 max. V V mV mV V mV ohm V V V ns ms ms ps ps ps dVOD=|VOD1−VOD2| dVOS=|VOS1−VOS2| LVDS Output @Minimum operating voltage to be 0 sec. Measured with Wavecrest SIA-3000 Note : All electrical characteristics are defined at the maximum load and operating temperature range. Note1: Please contact us for inquiry about operating temperature range, available frequencies and other conditions. Note2: DC characteristic Dimensions (Unit: mm) 1.4 #3 #2 #1 2.54 Plating: Ni+Au Tolerance: ±0.2 Pad Connections INH NC Case GND Output Complementary Output VCC INH Function Pad1 Pad4/ Pad5 (Output) Open Active "H" Level Active "L" Level High Z (No-Oscillation) 1.6 #1 #2 #3 #4 #5 #6 3.6 #6 5.0 #5 1.17 1.6 (Unit: mm) 5.08 #4 2.54 0.75 Recommended Land Pattern 0.6 2.46 7.0 2.54 1.6 Note: A capacitor of value 0.01μF and 10μF Between VCC and GND is recommended.