V I S H AY I N T E R T E C H N O L O G Y, I N C . Magnetics IW T X-47R0BE-11 Wireless Charging Transmitter Coil / Shield KEY BENEFITS • • • • • WPC-compliant transmitter coil (Qi standard is the industry’s leading platform) High-permeability shielding for wireless charging High-saturation powdered iron – not affected by permanent locating magnets Durable construction AEC-Q200-qualified APPLICATIONS • Wireless charging circuits in charging pads or customized solutions RESOURCES • Datasheet: IWTX-47R0BE-11 - www.vishay.com/doc?34412 • For technical questions contact [email protected] • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 A WORLD OF SOLUTIONS Product Sheet 1/2 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VMN-PT0487-1603 www.vishay.com FEATURES • Wireless charging transmitter coil V I S H AYshielding INTERT H N O L O G Y, I N C . • High permeability forE Cwireless charging • High saturation powdered iron - not affected by permanent locating magnets • Durable construction • AEC-Q200 qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Magnetics IW T X-47R0BE-11 SHIELD MATERIAL CHARACTERISTICS • • • • Permeability: ~ 24 Resistivity: > 10 M at 100 V Core loss: 4000 mW/cc at 500 gauss, 250 kHz Magnetic saturation: 50 % at 4000 gauss (~ 350 Oe) Wireless Charging Transmitter Coil / Shield STANDARD ELECTRICAL SPECIFICATIONS with Test Coil L0 INDUCTANCE SELF SATURATION +5 % / -10 % HEAT RATING EFFICIENCY (6) RESONANT CURRENT AT 200 kHz, CURRENT DCR (%) (3) (4) Q AT 200 kHz FREQUENCY DC TYP. 0.25 V, 0 A DC TYP. ± 10 % AT 25 °C (typ.) (MHz) (A) (A) (μH) (m) 24 71 200 7 6 20 > 70 Notes (1) All test data is referenced to 25 °C ambient. (2) Operating Temperature Range -55 °C to +155 °C. (3) DC current (A) that will cause an approximate T of 40 °C. (4) DC current (A) that will cause L to drop approximately 20 %. 0 (5) The part temperature (ambient + temp rise) should not exceed 155 °C under worst case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application. (6) When tested using BQ Tesla 500210 Transmitter Chipset, BQ51013 Receiver Chipset and IWAS-4832FF-50 as receiver coil with 2.7 mm spacing. Testing performed per WPC guidelines. DIMENSIONS in inches [millimeters] Ø 1.851 ± 0.010 (Ø 47.00 ± 0.25) 1.57 ± 0.08 (40.0 ± 2.0) 0.197 ± 0.039 (5.00 ± 1.00) tinned nominal 0.866 ± 0.020 (22.0 ± 0.5) 1.69 ± 0.02 (43.0 ± 0.5) 1.654 ± 0.039 (42.00 ± 1.00) 0.193 (4.90) max. Revision 12-Feb-16 DESCRIPTION IWTX-47R0BE-11 10 % EB e3 MODEL INDUCTANCE TOLERANCE PACKAGE CODE JEDEC® LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I W T MODEL X 4 7 R SHIELD SIZE 0 B E SHIELD THICKNESS E B LEAD (Pb)-FREE PACKAGE 2 4 0 INDUCTANCE VALUE K 1 1 TOL. MATERIAL LEAD CONFIG. Revision: 12-Feb-16 Document Number: 34412 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Product Sheet 2/2 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VMN-PT0487-1603 www.vishay.com