DC/DC Converters CTDD2010DF-S Series Fixed Input Isolated & Unregulated 1W Output, Single Output www.ctparts.com SPECIFICATIONS Part Number CTDD2010DF-0505S-1 CTDD2010DF-0509S-1 CTDD2010DF-0512S-1 CTDD2010DF-0515S-1 Vin Nom. (VDC) 5 5 5 5 Input Range Vout (VDC) (VDC) 4.5-5.5 5 4.5-5.5 9 4.5-5.5 12 4.5-5.5 15 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 5 9 12 15 200 111 83 67 20 12 9 7 79 79 81 81 CTDD2010DF-2405S-1 CTDD2010DF-2409S-1 CTDD2010DF-2412S-1 CTDD2010DF-2415S-1 24 24 24 24 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 5 9 12 15 200 111 83 67 20 12 9 7 79 80 80 80 isolation specifications Test Condition Isolation Resistance Min. Typ. VDC Test at 500VDC 1000 MΩ Test Condition Min. Typ. Max. Units 1 W 0.1 Line regulation For Vin change of 1% 1.2 % Load regulation 10% to 100% full load 15 % Output voltage accuracy 10 See tolerance envelope graph Temperature drift 100% full load Output ripple & noise 20Hz-300KHz bandwidth Switching frequency Full load, nominal input 100 0.03 %/°C 50 75 mVp-p 150 200 KHz Note: 1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. typical characteristics Temperature Derating Graph +10% Typic al +5% Nominal Voltage 10% Load Line Output Power(%) Tolerance Envelope Graph Output Voltage(%) Short Circuit Protection: 1 Second. Temperature Rise at Full Load: 25°C Max., 15°C Typ. Cooling: Free air convection. No-load Power Consumption: 10% nominal power Typ. Operating Temperature Range: -40°C to +85°C Storage Temperature Range: -55°C to +125°C Lead Temperature: 300°C (1.5mm from case for 10 seconds) Storage Humidity Range: ≤95% Case Material: Plastic (UL94-V0) MTBF: >1,000,000 hours Miscellaneous: RoHS Compliant. Units 3000 Output Power CHARACTERISTICS Max. Tested for 1 minute output specifications Item Efficiency: To 81% Temperature Range: -40°C to +85°C Isolation: 3KVDC Package: UL94-V0 Miscellaneous: Single Output Voltage. Fixed Input Voltage. Power Density 0.85W/cm3. Unregulated Output Voltage. No heatsink required. No external component required. Industry standard pinout. Fully encapsulated. Small footprint. Custom service available. Additional Information: Additional electrical & physical information available upon request. Samples available. See website for ordering information. Effi. Typ. (%) 78 78 80 81 12 12 12 12 Isolation Voltage features Iout Min. (mA) 20 12 9 7 CTDD2010DF-1205S-1 CTDD2010DF-1209S-1 CTDD2010DF-1212S-1 CTDD2010DF-1215S-1 Item Not Shown at Actual Size Iout Max. (mA) 200 111 83 67 +2.5% -2.5% -7.5% 80 60 40 20 Safe Operating Area 0 -40 100% 50% 120 100 Output Current(%) 0 40 80 120 Ambient Temperature(°C) pin connections Pin 1 7 8 10 14 Function GND NC +Vo 0V Vin 1 14 Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2012 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice 7 10 8 REV 10.24.12 DC/DC Converters www.ctparts.com ctdd2010DF-S Fixed Input Isolated & Unregulated 1W Output, Single Ouput outline dimensions & recommended footprint details CTDD2010DF-S PACKAGE 20.40 7.00 Side View 4.10 15.24 7.62 1 7 14 10 8 10.0 Bottom View CTDD2010DF-S FOOTPRINT 2.54 ø1.00+0.15/-0 2.54 14 1 10 8 7 Note: All pins on a 2.54mm pitch; All pin diameters are 0.50mm; all dimensions in mm Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2012 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice REV 10.24.12