DC/DC Converters CTDD3214DF-S6K-1 Series Fixed Input Isolated & Unregulated 1W Output, Single Output Not shown at actual size. ctparts.com SPECIFICATIONS Vin Nom. (VDC) Part Number Input Range (VDC) Vout (VDC) Iout Max. (mA) Iout Min. (mA) Effi. Typ. (%) CTDD3214DF-0505-S6K-1 CTDD3214DF-0509-S6K-1 CTDD3214DF-0512-S6K-1 CTDD3214DF-0515-S6K-1 5 5 5 5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 5 9 12 15 200 111 84 67 20 12 9 7 68 72 74 74 CTDD3214DF-1205-S6K-1 CTDD3214DF-1209-S6K-1 CTDD3214DF-1212-S6K-1 CTDD3214DF-1215-S6K-1 12 12 12 12 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 5 9 12 15 200 111 84 67 20 12 9 7 69 72 74 75 ISOLATION SPECIFICATIONS RoHS Compliant Item Test Condition MIN TYP MAX Units Isolation Voltage Flash tested for 1 minute 6000 VDC Isolation Resistance Test at 500VDC 1000 MΩ OUTPUT SPECIFICATIONS Item Test Condition MIN 1W Output Power FEATURES Efficiency: To 75% Temperature Range: -40°C to 85°C Isolation: 6KVDC Package: UL94-V0 Miscellaneous: Positive Voltage Output. Small Footprint. No heat sink required. Fixed Input Voltage. No external component required. Industry standard pinout. Unregulated output voltage. Custom service available. Samples available. Technologies W ±1.2 % Load regulation 10% to 100% (5V output) 15 % Load regulation 10% to 100% (12V output) 10 % Output voltage accuracy 100% full load Efficiency at full load Nominal input voltage Temperature drift 100% full load See tolerance envelope graph 75 % 1W Output ripple 20MHz Bandwidth 75 Switching frequency Full load, nominal input 250 0.03 %/°C 150 mVp-p KHz Note: 1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. TYPICAL CHARACTERISTICS Temperature Derating Graph Typic a l Load Line +2.5% -2.5% -7.5% 10% 50% 100% Output Current(%) Manufacturer of Passive and Discrete Semiconductor Componenets 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2006 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice Output Power(%) +10% +5% Nominal Voltage 11.27.06 CENTRAL Units 1 Nominal voltage ±1% Output Voltage(%) Short Circuit Protection: 1 second Temperature Rise at Full Load: 25°C Max. 15°C Typ. Cooling: Free air convection Operating Temperature Range: -40°C to +85°C Storage Temperature Range: -55°C to +125°C Lead Temperature: 300°C (1.5mm from case for 10 seconds) Storage Humidity Range: < 95% Case Material: Plastic (UL94-V0) MTBF: >3,500,000 hours Miscellaneous: RoHS Compliant. MAX Line regulation Tolerance Envelope Graph CHARACTERISTICS TYP 0.1 120 100 80 60 Safe Operating Area 40 20 0 -40 0 40 80 120 Ambient Temperature(°C) DC/DC Converters ctparts.com CTDD3214DF-S6K-1 Series Fixed Input Isolated & Unregulated 1W Output, Single Output OUTLINE DIMENSIONS & RECOMMENDED FOOTPRINT DETAILS CTDD3214DF-S6K-1 Package 9.40 4.00 Side View 0.65 27.94 32.30 14.70 Top View CTDD3214DF-S6K-1 Footprint 1.00ø+0.15/-0 2.54 2.54 Note: All Pins on a 2.54mm pitch; all pin diameters are 0.50mm; all dimensions in mm. PIN CONNECTIONS Pin Function 1 Vin 2 GND 8,17 NC 10,15 0V 12,13 +Vo 24 23 17 16 15 14 13 1 2 8 9 10 11 12 Top View CENTRAL Technologies 11.27.06 Manufacturer of Passive and Discrete Semiconductor Componenets 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2006 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice