V I S H AY I N T E R T E C H N O L O G Y, I N C . THIN FILM RESISTOR Resistors - QPL Established Reliability Military Chip E /H QPL MIL-PRF-55342 Chip Resistor KEY BENEFITS • • • • Twelve qualified case sizes from 0402 to 2512 Characteristics E, H, K, L, and M Precision tolerances to 0.1 % “R” and “S” failure rate levels APPLICATIONS • • • • Missile/air flight control Communication systems Ground support radar Guidance and navigation control RESOURCES • Datasheet: QPL Chip Resistor - www.vishay.com/doc?60019 • For technical questions contact [email protected] One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT9118-1302 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . THIN FILM RESISTOR E /H E/H (Military M/D55342) Vishay Dale Thin Film QPL MIL-PRF-55342 Qualified QPL MIL-PRF-55342 Chip Resistor Thin Film Resistor, Surface Mount Chip FEATURES Thin Film Mil chip resistors feature all sputtered wraparound termination for excellent adhesion and dimensional uniformity. They are ideal in applications requiring stringent performance requirements. Established reliability is assured through 100 % screening and extensive environmental lot testing. CONSTRUCTION Passivation Resistor Film Solder Coating • Established reliability, “S” failure rate level (10 ppm), C = 2 • High purity alumina substrate 99.6 % purity • Wraparound termination featuring a tenacious adhesion layer covered with an electroplated nickel barrier layer for + 150 °C operating conditions • Very low noise and voltage coefficient (< - 25 dB, 0.5 ppm/V) • Non-inductive • Laser-trimmed tolerances ± 0.1 % • Wraparound resistance less than 0.010 typical • In-lot tracking less than 5 ppm/°C • Complete MIL-testing available in-house • Antistatic waffle pack or tape and reel packaging available • Military/aerospace/QPL TYPICAL PERFORMANCE Nickel Barrier High Purity Alumina Substrate Adhesion Layer ABSOLUTE TCR 25 TOL. 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST Material Resistance Range TCR: Absolute Tolerance: Absolute Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Shelf Life Stability: Absolute SPECIFICATIONS Tamelox resistor film (passivated nichrome) 10 to 6.19 M ± 25 ppm/°C to ± 300 ppm/°C ± 0.1 % to ± 10 % R ± 0.02 % 0.1 ppm/V 30 V to 200 V - 55 °C to + 125 °C - 55 °C to + 150 °C < - 25 dB R ± 0.01 % CONDITIONS - 55 °C to + 125 °C + 25 °C 2000 h at + 70 °C 1 year at + 25 °C COMPONENT RATINGS CASE SIZE Revision 30-Jan-13 Resistors - QPL Established Reliability Military Chip www.vishay.com POWER RATING (mW) 50 125 200 150 225 150 250 800 1000 500 50 100 RESISTANCE RANGE () BY CHARACTERISTICS TOLERANCE WORKING VOLTAGE E E H, K, L, M H, K, L, M (V) (0.1 %, 0.25 %, 0.5 %) (1 %, 2 %, 5 %) (0.1 %, 0.25 %, 0.5 %) (1 %, 2 %, 5 %) 40 49.9 to 150K 49.9 to 150K 20 to 150K 20 to 150K 40 49.9 to 301K 49.9 to 301K 20 to 301K 20 to 301K 75 49.9 to 649K 49.9 to 649K 10 to 649K 10 to 649K 125 49.9 to 1.69M 49.9 to 1.69M 10 to 1.69M 10 to 1.69M 175 49.9 to 3.16M 49.9 to 3.16M 10 to 3.16M 10 to 3.16M 50 49.9 to 475K 49.9 to 475K 10 to 475K 10 to 475K 100 49.9 to 1.5M 49.9 to 1.5M 10 to 1.5M 10 to 1.5M 150 49.9 to 4.02M 49.9 to 4.02M 10 to 4.02M 10 to 4.02M 200 49.9 to 6.19M 49.9 to 6.19M 10 to 6.19M 10 to 6.19M 75 49.9 to 1M 49.9 to 1M 49.9 to 1M 49.9 to 1M 30 49.9 to 100K 49.9 to 100K 20 to 100K 20 to 100K 50 49.9 to 258K 49.9 to 261K 10 to 258K 10 to 261K M55342/01 M55342/02 M55342/03 M55342/04 M55342/05 M55342/06 D55342/07 M55342/08 M55342/09 M55342/10 M55342/11 M55342/12 Note • Values listed are a guide, refer to MIL spec for value/tolerance allowance Revision: 30-Jan-13 PRODUCT Document Number: 60018 67 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SHEET 2/2 SET FORTH AT www.vishay.com/doc?91000 VMN-PT9118-1302 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000