V i s h ay Intertec h n o l o g y, Inc . I INNOVAT AND TEC O L OGY P-NS N HN Thin Film Resistor O 19 62-2012 Resistors - Special Passivation Method Thin Film Precision Surface-Mount Wraparound Chip Resistors Key Benefits • • • • • • Wide selection of case sizes Special Passivation Method (SPM) moisture resistance Tolerances to ± 0.02 % TCR of ± 25 ppm/°C (standard) to ± 10 ppm/°C Non-standard values available Solderable or wire-and-epoxy-bondable APPLICATIONS • Precision reference • Low-noise instrumentation • ATE industrial precision voltage dividers Resources • Datasheet: P-NS - http://www.vishay.com/doc?60023 • For technical questions contact [email protected] One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT9080-1201 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay Intertec h n o l o g y, Inc . AND TEC I INNOVAT O L OGY P-NS N HN Thin Film Resistor O 19 62-2012 P-NS www.vishay.com Vishay Dale Thin Film Thin Film Precision Surface-Mount Wraparound Chip Resistors Commercial Thin Film Resistor, Surface Mount Chip Actual Size 0505 For applications requiring low noise, stability, low temperature coefficient of resistance, and low voltage coefficient, all Vishay’s proven precision thin film wraparound resistors will meet your exact requirements. Manufactured with the same material and processes as QPL and manufactured in a QPL facility. SPM Passivation Enhancement • Moisture resistant (SPM) special passivation method • Non-standard values available • Pre-tinned terminations over nickel barrier (gold available) • Very low noise and voltage coefficient (< - 35 dB, 0.1 ppm/V) • Non-inductive • Laser-trimmed tolerances to 0.02 % • In-lot tracking less than 5 ppm/°C • Epoxy bondable termination available • Sulfur resistant (per ASTM B809-95 humid vapor test) • Compliant to RoHS Directive 2002/95/EC Notes * Pb containing terminations are not RoHS compliant, exemptions may apply ** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902 CONSTRUCTION Passivated Nichrome Resistive Film Solder Coating TYPICAL PERFORMANCE Nickel Barrier ABSOLUTE High Purity Alumina Substrate Adhesion Layer TCR 25 TOL. 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST Material Resistance Range TCR: Absolute Tolerance: Absolute Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Shelf Life Stability: Absolute SPECIFICATIONS Passivated nichrome 10 to 6.19 M ± 10 ppm/°C to 100 ppm/°C ± 0.02 % to ± 5 % R ± 0.02 % 0.1 ppm/V (typical) 75 V to 200 V - 55 °C to + 125 °C - 55 °C to + 150 °C < - 35 dB (typical) R ± 0.01 % CONDITIONS - 55 °C to + 125 °C + 25 °C 2000 h at 70 °C 1 year at + 25 °C COMPONENT RATINGS CASE SIZE (1) Revision 18-Nov-11 Resistors - Special Passivation Method FEATURES POWER RATING (mW) 50 100 150 150 250 250 250 500 400 400 800 800 1000 WORKING VOLTAGE (V) 75 75 75 75 100 100 100 150 200 150 150 200 200 0402 0502 0505 0603 0705 0805 1005 1010 1206 1505 2208 2010 2512 Notes (1) 0705 and 0805 are the same (only use 0805 when ordering) (2) Values > 1M best TCR ± 25 ppm/°C RESISTANCE RANGE () 0.1 % < 0.1 % 25 to 100K 250 to 100K 20 to 150K 250 to 150K 20 to 301K 250 to 301K 10 to 261K 250 to 261K 10 to 475K 250 to 475K 10 to 475K 250 to 475K 10 to 649K 250 to 649K 50 to 1M 250 to 1M 10 to 1.5M (2) 250 to 1M 10 to 1M 250 to 1M 10 to 3.16M (2) 250 to 1M 10 to 4.02M (2) 250 to 1M 10 to 6.19M (2) 250 to 1M Revision: 18-Nov-11 PRODUCT Document Number: 60023 1 For technical questions, contact: [email protected] SHEET 2/2 VMN-PT9080-1201 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000