V is h ay I n tertec h n o l o g y, I n c . I INNOVAT AND TEC O L OGY RCG e3 N HN THICK FILM CHIP RESISTORS O 19 62-2012 Resistors - AEC-Q200 Qualified Green Design Fully RoHS-Compliant, GREEN, Thick Film, Rectangular Chip Resistors Key Benefits • • • • Fully GREEN resistor body with pure tin solder contacts Stability DR/R = 1 % for 1000 h at 70 °C Metal glaze on high-quality ceramic AEC-Q200 qualified APPLICATIONS • • • • • Telecom infrastructure Computer Consumer Industrial equipment Automotive Resources • Datasheet: RCG e3 - http://www.vishay.com/doc?20047 • For technical questions contact [email protected] • Material categorization: For definitions of compliance please see http://www.vishay.com/doc?99912 e3 RoHS COMPLIANT e3 One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0258-1203 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V is h ay I n tertec h n o l o g y, I n c . AND TEC I INNOVAT RCG e3 RCG e3 O L OGY THICK FILM CHIP RESISTORS N HN O RCG e3 19 62-2012 Vishay Draloric Film,Vishay Draloric Fully RoHS Compliant, Thick Film, Rectangular ChipGreen, Resistors Rectangular Chip Resistors FEATURES FEATURES Fully Green** resistor body with pure tin solder contacts Fully Green** resistor body with pure tin solder contactsR/R = 1 % for 1000 h at 70 ° C Stability Stability R/R 1 %quality for 1000 h at 70 ° C Metal glaze on=high ceramic Metal glazetoon high Directive quality ceramic Compliant RoHS 2011/65/EU Compliant to RoHS Directive 2011/65/EU AEC-Q200 qualified AEC-Q200 qualified STANDARD ELECTRICAL SPECIFICATIONS SIZE RATED LIMITING TEMPERATURE STANDARD ELECTRICAL DISSIPATION SPECIFICATIONS ELEMENT MODEL COEFFICIENT P70 VOLTAGE STANDARD ELECTRICAL SPECIFICATIONS INCH METRIC LIMITING SIZE RATED ppm/K MODEL INCH MODEL RCG0402 INCH 0402 RCG0603 0603 RCG0603 RCG0603 0603 0603 RCG0805 0805 RCG0805 RCG0805 0805 0805 RCG1206 RCG1206 RCG1206 RESISTANCE TOLERANCE RANGE SERIES % Ω TEMPERATURE RESISTANCE UMAX. AC/DC W ELEMENT TOLERANCE DISSIPATION LIMITING SIZE RATED COEFFICIENT RANGE SERIES TEMPERATURE RESISTANCE VOLTAGE % P70 ELEMENT TOLERANCE DISSIPATION METRIC ppm/K ± 100 ± 1 E24; E96 COEFFICIENT RANGE SERIES W U AC/DC 0.063 50 1R0 to 10M max. VOLTAGE % P70 ± 200 ppm/K ±5 E24 METRIC RR 1005M W Umax. AC/DC ± 100 ±1 E24; E96 20 mΩ, Imax. = 1.5 A Zero-Ohm 0.1Resistor: Rmax. = 75 1R0 to 10M ±± 200 ±± 51 E24 100 E24; E96 RR 1608M 0.1 75 1R0 to 10M E24; E96 ± 100 ± 200 ±1 ±5 E24 0.1 75 1R0 to 10M RR 1608M Zero-Ohm-Resistor: Rmax. = 20 m, ±Imax. = 2.0 A 200 ±5 E24 RR 1608M Zero-Ohm-Resistor: R = 20 m, I = 2.0 A ±1 E24; E96 = 20 mΩ, Imax. =max. 2.0 ±A 100 Zero-Ohm Resistor: Rmax. max. 0.125 150 1R0 to 10M ± 200 ±5 E24 E24; E96 RR 2012M ± 100 ± 100 ±1 ±1 0.125 150 1R0 to 10M E24; E96 0.125 150 1R0 to 10M ± 200 ± 5 E24 200= 2.5 A ±5 E24 RR 2012M 2012M Zero-Ohm-Resistor: Rmax. = 20 m, ±Imax. RR Zero-Ohm-Resistor: Rmax. 20 m, = 20=mΩ, Imax. I=max. 2.5=±A2.5 Zero-Ohm Resistor: Rmax. 100A 0.25 200 ± 200 ± 100 ± 100 RR 3216M 0.25 200 200 0.25 ± 200 200 RR RR 3216M 3216M Zero-Ohm-Resistor: Rmax. = 20 m, Imax. =±3.5 A Imax. I= 3.5=A3.5 A Zero-Ohm Resistor: Rmax. Zero-Ohm-Resistor: R = 20=mΩ, 20 m, 1206 1206 1206 ±1 ±5 ±1 ±± 51 ±5 1R0 to 10M 1R0 to 10M 1R0 to 10M E24; E96 E24 E24; E96 E24; E96 E24 E24 max. max. Notes Notes These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over time may result in exceeding limit acceptable to the specific application, thereby a functional lifetime. operating These resistors do not feature a limitedalifetime when operated within the permissible limits.establishing However, resistance value drift increasing over Marking: MountaResistor Marking”to(document number 20020). operatingSee timedatasheet may result“Surface in exceeding limit acceptable the specific application, thereby establishing a functional lifetime. Power rating on“Surface the max.Mount temperature atMarking” the solder(document point, the number component placement density and the substrate material. Marking: Seedepends datasheet Resistor 20020). Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material. TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS PARAMETER UNIT RCG0603 RCG0805 RCG1206 PARAMETER Rated dissipation P70 (1) UNIT W RCG0603 0.1 RCG0805 0.125 RCG1206 0.25 Rated dissipation P70 U Limiting element voltage max. AC/DC W V 0.1 75 0.125 150 0.25 200 Limiting element max. AC/DC min) Insulation voltagevoltage Uins (1 U V V > 75 100 >150 200 >200 300 Insulation resistance voltage Uins (1 min) Insulation V > 100 > 10 200 9 > > 300 Insulationtemperature resistance range Category °C Category temperature range Weight °C mg (1) Revision 01-Jun-11 Resistors - AEC-Q200 Qualified Green Design Fully RoHS-Compliant, GREEN, Thick ChipGreen, Resistors FullyRectangular RoHS Compliant, Thick Film, 9 - 55>to10 + 155 2 - 55 to 5.5+ 155 10 Weight mg 2 5.5 10 Note (1) The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the Note board (thermal The rated only if the film temperature of 155 is not (1) printed-circuit The power dissipation on theresistance). resistor generates a dissipation temperatureapplies rise against the permitted local ambient, depending on the °C heat flowexceeded. support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded. ** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902 ** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902 Document Number: 20047 For technical questions, contact: [email protected] www.vishay.com Revision: 1 Document01-Jun-11 Number: 20047 For technical questions, contact: [email protected] www.vishay.com This document is subject to change without notice. Revision: 01-Jun-11 1 PRODUCT SHEET 2/2 VMN-PT0258-1203 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000