V I S H AY I N T E R T E C H N O L O G Y, I N C . THICK FILM CHIP RESISTORS RCA-IF Pulse Proof, Sulfur Resistant Thick Film Chip Resistor KEY BENEFITS • High pulse performance • Advanced sulfur resistance • AEC-Q200 qualified APPLICATIONS • • • • High and repetitive pulse loading HID headlight charge and discharge Lighting power supplies Medical equipment RESOURCES • Datasheet: RCA-IF - www.vishay.com/doc?20059 • For technical questions contact [email protected] • Material categorization: For definitions please see www.vishay.com/doc?99912 One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0437-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Sulfur Proof, Proof, Pulse Pulse Proof Proof Thick Thick Film Film Chip Chip Resistors Resistors Sulfur FEATURES V I S H AY I N T E R T E C H N O L O G Y, I N C . FEATURES • • • • • • • • Superior resistance against H2S-atmosphere Superior resistance against H2S-atmosphere High pulse performance High pulse performance AEC-Q200 qualified, rev. C compliant AEC-Q200 qualified, rev. C compliant Material categorization: for definitions of Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 compliance please see www.vishay.com/doc?99912 THICK FILM CHIP RESISTORS RCA-IF Pulse Proof, Sulfur Resistant Thick Film Chip Resistor STANDARD ELECTRICAL SPECIFICATIONS STANDARD ELECTRICAL SPECIFICATIONS CASE CASE SIZE SIZE INCH INCH MODEL MODEL CASE CASE SIZE SIZE METRIC METRIC POWER POWER RATING RATING P70 °C P70 W°C W LIMITING LIMITING ELEMENT ELEMENT VOLTAGE VOLTAGE Umax. Umax. AC/DC AC/DC V V 50 50 75 75 150 150 200 200 200 200 400 400 500 500 TEMPERATURE TEMPERATURE COEFFICIENT COEFFICIENT ppm/K ppm/K TOLERANCE TOLERANCE % % RESISTANCE RESISTANCE RANGE RANGE SERIES SERIES RCA0402-IF e3 0402 RR1005M 0.063 ± 200 ± 5, ± 10 1.0 to 100K E24 RCA0402-IF e3 0402 RR1005M 0.063 ± 200 ± 5, ± 10 1.0 to 100K E24 RCA0603-IF e3 0606 RR1608M 0.1 ± 200 ± 5, ± 10 1.0 to 100K E24 RCA0603-IF e3 0606 RR1608M 0.1 ± 200 ± 5, ± 10 1.0 to 100K E24 RCA0805-IF e3 0805 RR2012M 0.125 ± 200 ± 5, ± 10 1.0 to 100K E24 RCA0805-IF e3 0805 RR2012M 0.125 ± 200 ± 5, ± 10 1.0 to 100K E24 RCA1206-IF e3 1206 RR3216M 0.25 ± 200 ± 5, ± 10 1.0 to 100K E24 RCA1206-IF e3 1206 RR3216M 0.25 ± 200 ± 5, ± 10 1.0 to 100K E24 RCA1210-IF e3 1210 RR3225M 0.5 ± 200 ± 5, ± 10 1.0 to 100K E24 RCA1210-IF e3 1210 RR3225M 0.5 ± 200 ± 5, ± 10 1.0 to 100K E24 RCA2010-IF e3 2010 RR5025M 0.75 ± 200 ± 5, ± 10 1.0 to 100K E24 RCA2010-IF e3 2010 RR5025M 0.75 ± 200 ± 5, ± 10 1.0 to 100K E24 RCA2512-IF e3 2512 RR6332M 1.0 ± 200 ± 5, ± 10 1.0 to 100K E24 RCA2512-IF e3 2512 RR6332M 1.0 ± 200 ± 5, ± 10 1.0 to 100K E24 Notes Notes • These resistors do not feature a limited lifetime when operated within the limits of rated dissipation, permissible operating voltage and • These resistors do not feature a limited lifetime whentypically operated within the rated dissipation, permissible operating voltage and permissible film temperature. However, the resistance increases due limits to the of resistor’s film temperature over operating time, generally permissible filmThe temperature. However, resistance typically increases due to application the resistor’s film temperature time, generally known as drift. drift may exceed thethe stability requirements of an individual circuit and therebyover limitsoperating the functional lifetime. asnone. drift. The drift may exceed the stability requirements of an individual application circuit and thereby limits the functional lifetime. • known Marking: •• Marking: none. Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material. • Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material. TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS PARAMETER UNIT RCA0402-IF RCA0603-IF RCA0805-IF RCA1206-IF RCA1210-IF RCA2010-IF RCA2512-IF PARAMETER UNIT RCA0402-IF RCA0603-IF RCA0805-IF RCA1206-IF RCA1210-IF RCA2010-IF RCA2512-IF W 0.063 0.1 0.125 0.25 0.5 0.75 1.0 Rated dissipation P70 (1) W 0.063 0.1 0.125 0.25 0.5 0.75 1.0 Rated dissipation P70 (1) Limiting element voltage Umax. V 50 75 150 200 200 400 500 Limiting element voltage Umax. ACRMS/DC V 50 75 150 200 200 400 500 ACRMS/DC V 75 100 200 300 300 300 300 Insulation voltage Uins. (1 min) V 75 100 200 300 300 300 300 Insulation voltage Uins. (1 min) Insulation resistance > 109 9 Insulation resistance > 10 Operating temperature range °C -55 to +155 Preliminary Operating temperature range °C -55 to +155 Mass mg 0.65 2 5.5 10 16 25.5 40.5 Mass mg 0.65 2 5.5 10 16 25.5 40.5 Note Note (1) The power dissipation on the resistors generates a temperature rise against the local ambient, depending on the heat flow support of the (1) The power dissipation on the resistance). resistors generates a temperature rise against ambient, onisthe flow support of the www.vishay.com printed-circuit board (thermal The rated dissipation applies only ifthe thelocal permitted film depending temperature notheat exceeded. printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded. RCA-IF e3 Vishay Draloric DIMENSIONS in millimeters Revision: 01-Dec-14 Document Number: 20059 1 RECOMMENDED SOLDER PAD Number: DIMENSIONS Revision: 01-Dec-14 Document 20059 1 [email protected] For technical questions, contact: SIZE DIMENSIONS For technical questions, contact: [email protected] REFLOW SOLDERING WAVE SOLDERING THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT THIS DOCUMENT SUBJECT TOTO CHANGE WITHOUT NOTICE. THEFORTH PRODUCTS DESCRIBED HEREIN AND THIS ARE SUBJECT SPECIFIC DISCLAIMERS, SET AT www.vishay.com/doc?91000 IMPERIAL METRIC IS L W H T1 T2 a b l a DOCUMENT b l ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 0402 RR1005M 1.0 ± 0.05 0.5 ± 0.05 0.35 ± 0.05 0.25 ± 0.05 0.2 ± 0.1 0.4 0.6 0.5 Revision 16-Sep-14 0603 RR1608M 1.55 + 0.10 - 0.05 0805 RR2012M 2.0 + 0.20 - 0.10 1206 RR3216M 3.2 + 0.10 - 0.20 1210 RR3225M 2010 RR5025M 2512 RR6332M 6.3 ± 0.2 0.85 ± 0.1 0.45 ± 0.05 1.25 ± 0.15 0.45 ± 0.05 0.3 ± 0.2 0.3 + 0.20 - 0.10 0.3 ± 0.2 0.5 0.9 1.0 0.9 0.9 1.0 0.3 ± 0.2 0.7 1.3 1.2 0.9 1.3 1.3 0.4 ± 0.2 0.9 1.7 2.0 1.1 1.7 2.3 1.6 ± 0.15 0.55 ± 0.05 0.45 ± 0.2 3.2 ± 0.2 2.5 ± 0.2 0.55 ± 0.05 0.45 ± 0.2 0.4 ± 0.2 0.9 2.5 2.0 1.1 2.5 2.2 5.0 ± 0.15 2.5 ± 0.15 0.6 ± 0.1 0.6 ± 0.2 0.6 ± 0.2 1.0 2.5 3.9 1.2 2.5 3.9 3.15 ± 0.15 0.6 ± 0.1 0.6 ± 0.2 0.6 ± 0.2 1.0 3.2 5.2 1.2 3.2 5.2 FUNCTIONAL PERFORMANCE PRODUCT SHEET 2/2 PERFORMANCE IN SULFUR-CONTAINING AMBIANCE TEST NAME HUMID SULFUR VAPOR TEST VMN-PT0437-1411 HUMID SULFUR VAPOR TEST (Accelerated) THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ASTM B809-95 Reference specification ASTM B809-95 accelerated conditions