V I S H AY I N T E R T E C H N O L O G Y, I N C . NON-LINEAR RESISTORS Resistive Products Size and Encapsulant Product Family NTCS SMD NTCS...SMT NTHS NTCC200/300 Ni barrier + tinned on T&R glass protected NEW 2K2 to 680K 2K to 100K 4K7 to 100K 100K to 210K 6K to 330K 4K7 to 350K 6K8 to 350K 10K to 350K 1.3 -40 to +150 x x 2880 to 3560 0.5 to 3 3977 0.75 3740 to 4570 1.5 3528 to 4570 0.5 to 2 2K to 470K NTCLE305 1.60 mm epoxy NTCLG...E2 SOD27 glass NTCLE400 6 mm epoxy NTCLE428 NTCLP4 11/12/13 NTCLP450 3 mm epoxy Pipe 6 mm Pipe 3.2 mm NTCALUG01 -40 to +125 3977 Tinned Ni 0.4 mm 2.41 mm epoxy 3 ±5 10K to 470K NTCLE301 ± 3 to ± 10 (±1 to ±10 3486 to 4262 Curve1) x x x 2K2 to 10K NEW 3.3R to 2K ± 2 to ± 5 ± 1 to ± 5 2060R to 2800R 3K to 10K ± 0.5 K 30 K 2K1 Tinned Ni 0.4 mm ± 1 to ± 5 10K (T&R long leads available) 12K to 100K Insulated silvered 3K to 10K Ni 0.25 mm ± 0.5 K Insulated silvered 2060R to 10K Ni 0.20 mm Tinned Ni 0.5 mm (T&R available) Tinned CCSW 0.56 mm bulk / T&R UL-2468 PVC lead wire AWG24 UL-2651 PVC lead wire AWG30 PVC lead wire AWG30 UL-2651 PVC lead wire AWG26/24/22 UL-2651 PVC lead wire AWG30 NTCALUG03/39 Stud screw M2/M3 ETFE AWG30 SP Ni Anodized Alu screw M4 Tinned Cu 0.6 mm Tinned Ni 0.5 mm ABS cap diameter diam 7 mm to 9 mm SS pipe 2.5 mm to 3.9 mm (brass collar) SELECTOR GUIDE 0.75 3511 to 3984 0.5 to 1 1.3 to 3 -40 to +125 -55 to +150 -55 to +150 -40 to +125 2K2 to 100K ±3 3977 to 4190 0.75 to 1.5 -40 to +85 4K7 to 100K ± 1 to ± 5 3435 to 4190 0.5 to 1.5 4K7 to 100K ± 1 to ± 5 3435 to 4190 0.5 to 1.5 100K ±3 4190 1.5 4K7 to 100K ± 1 to ± 3 x x x x x x x x x x x x x x x x -40 to +105 x x -40 to +105 0.5 to 1.5 -40 to +150 -55 to +125 -40 to +125 ± 1 to ± 5 x x -40 to +200 3797 to 3977 3435 to 4190 PEEK AWG30 SP Ni NTCAIMME3 3977 x x x x ±5 PTFE AWG24 TP Cu NTCALUG02 NTCACAP 3528 to 4090 0.5 to 0.75 3984 0.5 3935 0.75 3511 0.5 3435 to 3984 0.5 to 0.75 3740 to 4190 0.75 to 1.5 x x -40 to +125 10K to 220K Stud screw M3 NTCASCW 1 x x x x x x x x x x x x x x x x x x x x x x -55 to +175 Tinned Cu 0.6 mm ...B0: Bulk 1E pitch ...T1: T&R 1E pitch ...T2: T&R 2E pitch 2.5 mm epoxy -40 to +150 1 3.8 mm epoxy (5 mm) NTCLE213 1 to 3 Temp. Range (ºC) 3435 to 3865 NTCLE100 4 mm epoxy ±1 3430 to 4125 3420 to 4100 3490 to 4075 3590 B25/85 Tol. (%) ± 1 to ± 5 10K to 100K NTCLE203..SB0 ± 1 to ± 5 B25/85 (K) 4K7 to 20K Tinned dummet on T&R 3.4 mm epoxy Tol. (% or K) Ag/Au metallized bondable die SOD80 glass NTCLE413 Sensor Assemblies Ni barrier + tinned on T&R glass protected Res. Range R25 (Ω) NTCSMELF NTCLE203 Leaded (Through Hole) 0805 (2012 metric) 0603 (1608 metric) 0402 (1005 metric) 0402, 0603, 0805 1206 (3216 metric) 0805 (2012 metric) 0603 (1608 metric) 0402 (1005 metric) 2 mm x 2 mm x 0.7 mm Lead Wire or Termination Characteristics AEC-Q200 Compliant NTC Thermistors Sensors x x x x ± 2 to ± 5 3435 to 3984 1K to 470K ± 1 to ± 5 3528 to 4570 0.5 to 2.5 -40 to +100 x x Tinned, AWG22 to AWG30, single or double insulated 2K7 to 10K ± 1, ± 2 3984 0.5 -55 to +60 x x UL-2651 PVC lead wire AWG30 10K ±3 3984 1.0 -25 to +105 1/2 For technical questions, contact [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 x VMN-SG2161-1508 Document Number: 49050 www.vishay.com V I S H AY I N T E R T E C H N O L O G Y, I N C . NON-LINEAR RESISTORS Resistive Products SMD Product Family Size and Encapsulant Lead Wire or Termination Characteristics Res. Range R at Tref (Ω) Tn (ºC) PTCSS12, Ceramic 0805 (2012 metric) Ni barrier + tinned on T&R glass protected 470R 70 to 140 ± 5K > 100 000 -40 to Tn+15 PTS, Platinum Thin Film 0603 (1608 metric) 0805 (2012 metric) 1206 (3216 metric) Ni barrier + tinned in box / T&R protective coating 100R 100R, 500R 100R, 500R, 1K 0 ± 0.3K, ± 0.6K 3850 -55 to +155 0805 (2012 metric) Ni barrier + tinned on T&R protective coating 100R, 500R, 1K 0 ± 0.3K, ± 0.6K 3850 -55 to +175 PTS AT NEW Leaded (Through Hole) TFPT, Nickel Thin Film PTCSL03, Ceramic NEW TFPTL, Nickel Thin Film 1206 (3216 metric) 100R, 500R Temp. Tol. TCR Range (% or K) (ppm/ºC) (ºC) AEC-Q200 Compliant PTC Thermistors Sensors x x x x x x x x x x x x x x 0603 (1608 metric) 0805 (2012 metric) 1206 (3216 metric) Ni barrier + tinned in T&R 100R to 1K 100R to 5K 100R to 10K 25 ± 0.5 to ±5 4110 -55 to +150 x x x x x x x x x 3.5 mm silicone coating Tinned CCSW 0.5 mm 1E/2E pitch bulk / T&R 550R to 1330R 80 to 150 ± 5K > 100 000 -40 to Tn+15 x x 25 ± 1, ± 5 4110 -55 to +150 TFPTL10 3.6 mm epoxy 100R to 1K Tinned CCSW 0.5 mm 1E/2E pitch TFPTL15 4.0 mm epoxy 100R to 5K x x x x PTC Power Thermistors Leaded (Through Hole) SMD PTCTZ, PTCCZ, SMD Lead-frame PTCCL…D/E Overload 30 / 60 V PTCCL…F Overload 145 V PTCCL…H Overload 265 V PTCCL…S/T/V Overload ≥ 600 V PTCEL, Inrush-Current Limiting Size and Encapsulant D6.4, D7.2, D7.8 mm 10 mm pitch silicone Lead Wire or Termination Res. Range Characteristics R25 (Ω) Tin plated P-bronze leadframe, T&R 2R to 500R Tol. (%) Max. Voltage (VRMS) (VDC) Ihold – Imax. (ARMS) Em (J) Temp. Range (ºC) ± 10 to ± 20 16 to 600 Ih 0.05 - 0.5 Im 0.7 - 10 -40 to +85 x Ih 0.09 - 2.0 Im 0.8 - 23 Ih 0.05 - 1.0 Im 0.2 - 13 Ih 0.01 - 0.8 Im 0.08 - 5.5 -40 to +85 x x 600 to 1000 Ih 0.01 - 0.03 Im 0.1 - 0.5 -10 to +55 440 to 560 650 Ih 42 - 120 Em 150 460 625 to 800 Ih 100 - 140 Em 270 0R3 to 50R D5 to D21 mm Silicone coated Tinned CCSW 0.6 mm / 0.5 mm Bulk 2E pitch / T&R PTCCL…H..SBE Series Tinned CCSW/Cu 0.6 mm / 0.5 mm Bulk 2E pitch / T&R 400R to 5K Tinned CCSW 0.6 mm Bulk 2E pitch / T&R 60R to 500R Tinned CCSW 0.8 mm Bulk 2E pitch / T&R 60R to 120R 1R3 to 50R 30, 60 ± 20 2R1 to 5K PTCEL13 Series, D13 mm, silicone coated PTCEL17 Series, D17 mm, silicone coated 145 265 ± 20 to ± 25 ± 30 AEC-Q200 Compliant Product Family x x 0 to +70 x x x x x -40 to +85 (+125) x 5 mm, 7 mm, 10 mm, Tinned CCSW 0.6 mm, 0.8 mm VDRS05/07/ 14 mm, 20 mm tinned Cu 1.0 mm straight, kinked, 14 to 680 10/14/20 Standard epoxy coated flanged leads, bulk / T&R Surge 5 mm, 7 mm, 10 mm, Tinned CCSW 0.6 mm, 0.8 mm VDRH05/07/ 14 mm, 20 mm tinned Cu 1.0 mm straight, kinked 11 to 680 10/14/20 epoxy coated leads, bulk / T&R High Surge MLV Series SELECTOR GUIDE 0402, 0603, 0805 1206 1210, 1812, 2220 22 to 1100 100 to 6500 0.5 to 496 -40 to +85 x x x 18 to 1100 250 to 10 000 0.7 to 620 -40 to +125 x x x 4 to 25 8 to 46 20 to 40 0.05 to 0.1 8 to 150 100 to 1200 x x 4 to 95 0.5 to 12 -40 to +125 -40 to +85 Ni barrier + tinned in T&R 2/2 Vbd Max. Isurge Max. Temp. (VDC at (Apeak) Energy (J) Range 1 mA) 8/20 µs 10/1000 µs (ºC) ±10% V D E Voltage Range (VRMS) Leaded Lead Wire or Termination Characteristics SMD Product Family Reference Size and Encapsulant AEC-Q200 Compliant Varistors For technical questions, contact [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VMN-SG2161-1508 Document Number: 49050 www.vishay.com