Thin Film Products (Vishay Thin Film)

VISHAY INTE R TE C HN O L O G Y , IN C .
INTERACTIVE
data book
Vishay Dale thin film products
vishay Dale thin film
vse-db0024-1309
Notes:
1.To navigate:
a) Click on the Vishay logo on any datasheet to go to the Contents page for that section. Click on the Vishay logo on any Contents
page to go to the main Table of Contents page.
b) Click on the products within the Table of Contents to go directly
to the datasheet.
c) Use the scroll or page up/page down functions.
d) Use the Adobe ® Acrobat ® page function in the browser bar.
2.To search the text of the catalog use the Adobe ® Acrobat ® search function.
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
RESISTORS
Vishay Intertechnology, Inc.
Vishay Dale Thin Film
Vishay Dale Thin Film Products
Data Book
• Surface Mount Networks
• Surface Mount Chips
• Through Hole Networks
• RC Networks
• Prototyping
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
QR CODE
VSE-DB0024-1309
RESISTORS
Vishay Dale Thin Film
SEMICONDUCTORS
MOSFETs
Low-Voltage TrenchFET® Power MOSFETs
Medium-Voltage Power MOSFETs
High-Voltage Planar MOSFETs
High-Voltage Super Junction MOSFETs
Automotive-Grade MOSFETs
ICs
Power Management and Power Control ICs
Smart Load Switches
Analog Switches and Multiplexers
DIODES SEGMENT
PRODUCT LISTINGS
Vishay Intertechnology, Inc.
MOSFETS SEGMENT
Rectifiers
Schottky Rectifiers
Ultra-Fast Recovery Rectifiers
Standard and Fast Recovery Rectifiers
High-Power Rectifiers/Diodes
Bridge Rectifiers
Small-Signal Diodes
Schottky and Switching Diodes
Zener Diodes
Tuner/Capacitance Diodes
Bandswitching Diodes
RF PIN Diodes
Protection Diodes
TVS Diodes or TRANSZORB®
(uni-directional, bi-directional)
ESD Protection Diodes (including arrays)
Thyristors/SCRs
Phase-Control Thyristors
Fast Thyristors
Power Modules
Input Modules
(diodes and thyristors)
Output and Switching Modules
(contain MOSFETs, IGBTs, and diodes)
Custom Modules
OPTOELECTRONIC COMPONENTS
SEGMENT
Infrared Emitters and Detectors
Optical Sensors
Infrared Remote Control Receivers
Optocouplers
Phototransistor, Photodarlington
Linear
Phototriac
High-Speed
IGBT and MOSFET Driver
Solid-State Relays
LEDs and 7-Segment Displays
Infrared Data Transceiver Modules
Custom Products
PASSIVE COMPONENTS
RESISTORS AND INDUCTORS SEGMENT
Film Resistors
Metal Film Resistors
Thin Film Resistors
Thick Film Resistors
Metal Oxide Film Resistors
Carbon Film Resistors
Wirewound Resistors
Vitreous, Cemented, and Housed Resistors
Braking and Neutral Grounding Resistors
Custom Load Banks
Power Metal Strip® Resistors
Chip Fuses
Variable Resistors
Cermet Variable Resistors
Wirewound Variable Resistors
Conductive Plastic Variable Resistors
Contactless Potentiometers
Networks/Arrays
Non-Linear Resistors
NTC Thermistors
PTC Thermistors
Varistors
Magnetics
Inductors
Transformers
Coils
Connectors
CAPACITORS SEGMENT
Tantalum Capacitors
Molded Chip Tantalum Capacitors
Coated Chip Tantalum Capacitors
Solid Through-Hole Tantalum Capacitors
Wet Tantalum Capacitors
Ceramic Capacitors
Multilayer Chip Capacitors
Disc Capacitors
Film Capacitors
Power Capacitors
Heavy-Current Capacitors
Aluminum Capacitors
VSE-DB0024-1309
Vishay Dale
Thin Film Products
Vishay Intertechnology, Inc.
Vishay Thin Film
2160 Liberty Drive
Niagara Falls, NY 14304
U.S.A.
Phone: +1 716 283 4025
Fax: +1 716 283 5932
www.vishay.com
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of
June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE)
- recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Table of Contents
www.vishay.com
Vishay Dale Thin Film
Thin Film Products
SURFACE MOUNT NETWORKS
MP ........................................................................................................................................................................................
MPM (Divider).......................................................................................................................................................................
MPMA (Divider) ....................................................................................................................................................................
4
6
8
MPD, MPDA .........................................................................................................................................................................
11
ORN......................................................................................................................................................................................
ORN (Divider) .......................................................................................................................................................................
ORNV (Divider).....................................................................................................................................................................
OSOP ...................................................................................................................................................................................
VTSR, VSSR, VSOR ............................................................................................................................................................
NOMC...................................................................................................................................................................................
NOMCA ................................................................................................................................................................................
TOMC ...................................................................................................................................................................................
VSOR2000S1 .......................................................................................................................................................................
WOMC ..................................................................................................................................................................................
CSO ......................................................................................................................................................................................
CSOM ...................................................................................................................................................................................
14
16
18
20
22
25
28
32
34
36
39
42
LCC, TLCC ...........................................................................................................................................................................
45
MPH......................................................................................................................................................................................
PR100, PR135, PR182.........................................................................................................................................................
FP200, FP201, FP202 ..........................................................................................................................................................
DFN ......................................................................................................................................................................................
DFN (Divider)........................................................................................................................................................................
QFN- .....................................................................................................................................................................................
HTRN....................................................................................................................................................................................
48
50
53
55
57
59
62
SURFACE MOUNT CHIPS
E/H (Military M/D55342) .......................................................................................................................................................
E/H (T-Level) (Military M/D55342) ........................................................................................................................................
E/H (Ta2N) (Military M/D55342) ...........................................................................................................................................
65
68
71
D.S.C.C. Specifications ........................................................................................................................................................
74
P-NS .....................................................................................................................................................................................
PTN.......................................................................................................................................................................................
L-NS......................................................................................................................................................................................
M...........................................................................................................................................................................................
FC .........................................................................................................................................................................................
PNM......................................................................................................................................................................................
PLT .......................................................................................................................................................................................
PLTT .....................................................................................................................................................................................
PAT.......................................................................................................................................................................................
PATT.....................................................................................................................................................................................
PHP ......................................................................................................................................................................................
Tape and Reel Specifications ...............................................................................................................................................
Waffle Pack Packaging.........................................................................................................................................................
75
77
80
83
86
90
93
95
98
101
104
107
109
Revision: 09-Sep-13
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Table of Contents
www.vishay.com
Vishay Dale Thin Film
THROUGH HOLE NETWORKS
CTSP ....................................................................................................................................................................................
TSP.......................................................................................................................................................................................
VTF (Standard) .....................................................................................................................................................................
Typical Resistor Network Applications..................................................................................................................................
VTF (Custom) .......................................................................................................................................................................
100-267.................................................................................................................................................................................
TDP.......................................................................................................................................................................................
CS.........................................................................................................................................................................................
CSD ......................................................................................................................................................................................
HD.........................................................................................................................................................................................
HVPS ....................................................................................................................................................................................
M83401, C83401 ..................................................................................................................................................................
111
114
116
124
127
130
132
135
138
141
144
146
RC NETWORKS
VTSRC20-AB, VSSRC20-AB, VSORC20-AB ......................................................................................................................
VTSRC20-AC, VSSRC20-AC, VSORC20-AC......................................................................................................................
VTSRC20-AA, VSSRC20-AA, VSORC20-AA ......................................................................................................................
VTSRC20-AD, VSSRC20-AD, VSORC20-AD......................................................................................................................
VSSRC1284 .........................................................................................................................................................................
VR.........................................................................................................................................................................................
VSSX1284 ............................................................................................................................................................................
150
153
156
159
162
165
168
PROTOTYPING
Quick Chip Prototype Service Guide ....................................................................................................................................
Quick-Net® Prototype Guidelines ........................................................................................................................................
Quick-Net® Prototype Fax Form ..........................................................................................................................................
E6, E12, E24 and E96 Tables ..............................................................................................................................................
Application Guide..................................................................................................................................................................
Revision: 09-Sep-13
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
171
172
173
174
175
Contents
Surface
Mount
Networks
MP.........................................
4
MPM (Divider) .......................
6
MPMA (Divider).....................
8
MPD, MPDA ..........................
11
ORN ......................................
14
ORN (Divider)........................
16
ORNV (Divider) .....................
18
OSOP....................................
20
VTSR, VSSR, VSOR.............
22
NOMC ...................................
25
NOMCA.................................
28
TOMC....................................
32
VSOR2000S1........................
34
WOMC ..................................
36
CSO ......................................
39
CSOM ...................................
42
LCC, TLCC............................
45
MPH ......................................
48
PR100, PR135, PR182 .........
50
FP200, FP201, FP202 ..........
53
DFN.......................................
55
DFN (Divider) ........................
57
QFN- .....................................
59
HTRN ....................................
62
MP
www.vishay.com
Vishay Dale Thin Film
Molded, SC70 Thin Film Resistor, Surface Mount Network
FEATURES
•
•
•
•
MP 3 LEAD
MP 4 LEAD
Actual Size
Vishay Dale Thin Film MP Series Dividers provide
± 2 ppm/°C tracking and a ratio tolerance as tight as
± 0.05 %, ultra small size, 3 or 4 lead package and
exceptional stability for all surface mount applications. The
standard SC70 package format with common standard
resistance values provide easy selection for most
applications requiring matched pair resistor elements. If you
require a non-standard ratio, consult the applications
engineering group as we may be able to meet your
requirements.
Small physical size EIAJ SC70 format
Tight resistance ratio tolerances ± 0.05 %
Available
Low TCR tracking ± 2 ppm
Available
Excellent long term ratio stability
(R ± 0.015 % at 70 °C for 2000 h)
• Center-tapped or isolated matched pair
resistors
• Compliant to RoHS Directive 2002/95/EC
• Halogen-free according to IEC 61249-2-21 definition
Note
* Pb containing terminations are not RoHS compliant, exemptions
may apply
TYPICAL PERFORMANCE
ABSOLUTE
TRACKING
25
2
ABSOLUTE
RATIO
0.1
0.05
TCR
TOL.
SCHEMATIC
STANDARD RESISTANCE VALUES
3
R1
4
3
TYPE
R2
R1
R2
MP3
2
1
3 LEAD VERSION
1
2
4 LEAD VERSION
MP4
STANDARD VALUES
R1 ()
R2 ()
500
500
1K
1K
10K
10K
1K
1K
10K
10K
50K
50K
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
Revision: 20-Oct-11
SPECIFICATIONS
Passivated nichrome
3, 4
100  to 50 k per resistor
± 25 ppm/°C
± 2 ppm/°C (typical)
± 0.10 % to ± 1.0 %
± 0.05 % (standard), ± 1.0 %
0.075 W
0.150 W
R ± 0.05 %
R ± 0.015 %
0.1 ppm/V
100 V max. not to exceed P x R
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 30 dB
0.1 μV/°C
R ± 0.01 %
R ± 0.002 %
CONDITIONS
- 55 °C to + 125 °C
- 55 °C to + 125 °C
+ 25 °C
Maximum at + 70 °C
Maximum at + 70 °C
2000 h at + 70 °C
2000 h at + 70 °C
1 year at + 25 °C
1 year at + 25 °C
Document Number: 60092
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MP
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in millimeters
D
SC70 3L
A2
A
DIMENSION
MIN.
MAX.
A
0.800
1.100
A1
0.000
0.100
A2
0.800
1.000
B
0.100
0.018
b1
0.400
0.500
b2
0.200
0.250
D
1.800
2.200
E
1.800
2.400
E1
1.150
1.350
e
1.300
-
e2
A1
b2
E1 E
B
L
e
L1
D
SC70 4L
A2
A
e
A1
b2
b1
E1 E
B
L
e2
0.650
-
L1
L
0.100
0.030
MECHANICAL SPECIFICATIONS
DERATING CURVE
Passivated nichrome
Substrate Material
Silicon
Body
100
Percent of Rated Power
Resistive Element
Molded epoxy
Terminals
Copper alloy
Lead (Pb)-free Option
100 % matte tin
Tin Lead Option
Sn85
Tin Lead and Lead (Pb)-free Finish
Plated
100 % = 0.15 W
80
60
40
20
0
0
70
125
150
Ambient Temperature °C
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: MP32001AWS
M
M
P
3
2
0
0
1
A
W
S
P
T
4
2
0
0
1
B
T
1
GLOBAL MODEL
(2 or 3 digits)
LEADS
RESISTANCE
MP
(Tin Lead)
3
4
The first 3 digits are
significant figures and the
last digit specifies the
number of zeros to follow.
When like values are
required use total resistance.
MPT
(Lead (Pb)-free)
(e3)
TOLERANCE AND
RATIO TOLERANCE
Abs. Tol.
Ratio
A = 0.1 %
B = 0.1 %
C = 0.25 %
D = 0.5 %
F = 1.0 %
0.05 %
0.1 %
0.1 %
0.1 %
0.5 %
Example:
2001 = 2K (1K/1K)
2002 = 20K (10K/10K)
PACKAGING
BS = BULK 100 min., 1 mult
WS = WAFFLE 100 min., 1 mult
TAPE AND REEL
T1 = 1000 min., 1000 mult (1)
Note
(1) Preferred packaging code
Historical Part Number example: MP32002BW (for reference purposes only)
MP
3
2002
B
W
SERIES
LEADS
RESISTANCE
TOLERANCE AND
RATIO TOLERANCE
PACKAGING
Revision: 20-Oct-11
Document Number: 60092
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MPM (Divider)
www.vishay.com
Vishay Dale Thin Film
Molded, SOT-23 Thin Film Resistor, Surface Mount Divider Network
FEATURES
• Excellent long term ratio stability
(R ± 0.015 %, 2000 h, + 70 °C)
• Ratio tolerances to ± 0.01 %
• Low TCR tracking ± 2 ppm
• Standard JEDEC TO-236 package variation AB
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
Vishay Dale Thin Film MPM Series Dividers provide
± 2 ppm/°C tracking and a ratio tolerance as tight as 0.01 %,
small size, and exceptional stability for all surface mount
applications. The standard SOT-23 package format with
unity and common standard resistance divider ratios
provide easy selection for most applications requiring
matched pair resistor elements. The ratios listed are
available for off the shelf delivery. If you require a
non-standard ratio, consult the applications engineering
group as we may be able to meet your requirements.
SCHEMATIC
3
R1
1
R2
2
Available
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
TYPICAL PERFORMANCE
ABSOLUTE
TCR
TRACKING
25
2
ABSOLUTE
RATIO
0.1
0.05
TOL.
STANDARD DIVIDER RATIO (R2/R1)
RATIO
100:1
50:1
25:1
20:1
10:1
9:1
6:1
5:1
5:1
4:1
4:1
2:1
2:1
1:1
1:1
1:1
1:1
1:1
1:1
1:1
1:1
R2 ()
100K
50K
25K
20K
10K
9K
6K
10K
5K
8K
4K
10K
2K
50K
25K
10K
5K
2.5K
1K
500
250
R1 ()
1K
1K
1K
1K
1K
1K
1K
2K
1K
2K
1K
5K
1K
50K
25K
10K
5K
2.5K
1K
500
250
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
Revision: 12-Jul-13
SPECIFICATIONS
Passivated nichrome
3
250  to 100 k per resistor
± 25 ppm/°C
± 2 ppm/°C (typical)
± 0.05 % to ± 1.0 %
± 0.01 % to 0.5 %
100 mW
200 mW
R ± 0.05 %
R ± 0.015 %
0.1 ppm/V
100 V max. not to exceed P x R
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 30 dB
0.2 μV/°C
R ± 0.01 %
R ± 0.002 %
CONDITIONS
- 55 °C to + 125 °C
- 55 °C to + 125 °C
+ 25 °C
+ 25 °C
Maximum at + 70 °C
Maximum at + 70 °C
2000 h at + 70 °C
2000 h at + 70 °C
1 year at + 25 °C
1 year at + 25 °C
Document Number: 60001
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MPM (Divider)
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in inches and millimeters
INCHES
MIN.
MAX.
0.031
0.040
0.001
0.004
0.105
0.120
0.071
0.079
0.015
0.021
0.083
0.098
0.047
0.055
0.005
0.010
0.0035
0.0059
0.017
0.022
0
8°
DIMENSION
A
A1
B
S
W
L
H
T
J
K
Ø
3
W
B
T
H L
A
S
A1
J
K
1
2
Pin #
Ø
MECHANICAL SPECIFICATIONS
DERATING CURVE
Passivated nichrome
Substrate Material
Silicon
100
Percent of Rated Power
Resistive Element
Body
Molded epoxy
Terminals
Copper alloy
Lead (Pb)-free Option
MILLIMETERS
MIN.
MAX.
0.79
1.02
0.02
0.10
2.67
3.05
1.80
2.00
0.38
0.54
2.10
2.50
1.20
1.40
0.13
0.25
0.089
0.15
0.44
0.55
0
8°
100 % matte tin
Tin Lead Option
Sn85
Tin Lead and Lead (Pb)-free Finish
Plated
100 % = 0.2 W
80
60
40
20
0
0
70
125
150
Ambient Temperature °C
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: MPM1003AWS
M
M
P
M
P
M
T
1
0
1
0
0
3
0
1
5
0
GLOBAL MODEL
(3 or 4 digits)
RESISTANCE
(4 or 8 digits)
MPM
(Tin lead)
First 3 digits are significant
figures and the last digit
specifies the number of zeros
to follow. When like values are
required use total resistance.
When dual values are required
list both values.
MPMT
(Lead (Pb)-free)
(e3)
Example:
(List R1 first in part number
with dual values)
1002 = 10K (5K/5K)
1003 = 100K (50K/50K)
10011002 = 1K/10K divider
0
TOLERANCE AND
RATIO TOLERANCE
Abs. Tol.
Ratio
A = 0.1 %
B = 0.1 %
C = 0.25 %
D = 0.5 %
F=1%
Z = 0.1 % (1)
Q = 0.05 % (1)
0.05 %
0.1 %
0.1 %
0.1 %
0.5 %
0.025 %
0.01 %
1
A
W
S
A
T
1
PACKAGING
BS = BULK 100 min., 1 mult
WS = WAFFLE 100 min., 1 mult
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult (2)
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel 4000
TS = 100 min., 1 mult
Historical Part Number example: MPM1002BW (for reference purposes only)
MPM
1002
B
W
SERIES
RESISTANCE
TOLERANCE AND
RATIO TOLERANCE
PACKAGING
Notes
(1) Tol. available 1K and up equal values only
(2) Preferred packaging code
Revision: 12-Jul-13
Document Number: 60001
7
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MPMA (Divider)
www.vishay.com
Vishay Dale Thin Film
Matched Pair, Molded, Automotive, Thin Film, SOT-23, Resistor,
Surface Mount Network, AEC-Q200 Qualified
FEATURES
Vishay Thin Film MPMA Series dividers provide ± 2 ppm/°C
tracking and a ratio tolerance as tight as ± 0.05 %, small
size, and exceptional stability for all surface mount
applications. The standard SOT-23 package format with
unity and common standard resistance divider ratios
provide easy selection for most applications requiring
matched pair resistor elements. MPMA is AEC-Q200
qualified and ideal for high precision automotive
applications. The ratios listed are available for off the shelf
delivery. If you require a non-standard ratio, consult the
applications engineering group as we may be able to meet
your requirements.
SCHEMATIC
3
R1
1
R2
2
• AEC-Q200 qualified
• Resistance range 250  to 50 k
• Excellent long term ratio stability ± 0.03 % over
1000 h, 125 °C
• Ratio tolerances to ± 0.05 %
• Tracking as low as ± 2 ppm/°C
• Very low noise and voltage coefficient
(< - 30 dB, 0.1 ppm/V)
• Standard JEDEC TO-236 package variation AB
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
STANDARD DIVIDER RATIO (R2/R1)
RATIO
50:1
25:1
20:1
10:1
9:1
6:1
5:1
5:1
4:1
4:1
2:1
2:1
1:1
1:1
1:1
1:1
1:1
1:1
1:1
1:1
R2 ()
50K
25K
20K
10K
9K
6K
10K
5K
8K
4K
10K
2K
50K
25K
10K
5K
2.5K
1K
500
250
R1 ()
1K
1K
1K
1K
1K
1K
2K
1K
2K
1K
5K
1K
50K
25K
10K
5K
2.5K
1K
500
250
TCR TRACKING
10 ppm/°C
5 ppm/°C
3 ppm/°C
2 ppm/°C
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
Revision: 14-Jun-13
SPECIFICATIONS
Ta2N
3
250  to 50 k per resistor
± 25 ppm/°C
Down to ± 2 ppm/°C
± 0.1 % to ± 1.0 %
± 0.05 % to 0.5 %
100 mW
200 mW
< 1 k: ± 0.35 %; > 1 k: ± 0.04 %
< 1 k: ± 0.35 %; > 1 k: ± 0.03 %
0.1 ppm/V
100 V max. not to exceed P x R
- 55 °C to + 155 °C
- 55 °C to + 155 °C
< - 30 dB
0.2 μV/°C
R/R ± 0.01 %
R/R ± 0.002 %
CONDITIONS
- 55 °C to + 125 °C
- 55 °C to + 125 °C
+ 25 °C
+ 25 °C
Maximum at + 70 °C
Maximum at + 70 °C
1000 h at + 125 °C
1000 h at + 125 °C
1 year at + 25 °C
1 year at + 25 °C
Document Number: 60113
8
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MPMA (Divider)
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in inches and millimeters
INCHES
DIMENSION
3
W
B
T
H L
S
A1
J
K
1
Pin #
2
Ø
MECHANICAL SPECIFICATIONS
Tantalum nitride
Substrate Material
Ceramic
Terminals
Lead (Pb)-free Option
MIN.
MAX.
A
0.031
0.040
0.79
1.02
0.001
0.004
0.02
0.10
B
0.105
0.120
2.67
3.05
S
0.071
0.079
1.80
2.00
W
0.015
0.021
0.38
0.54
L
0.083
0.098
2.10
2.50
H
0.047
0.055
1.20
1.40
T
0.005
0.010
0.13
0.25
J
0.0035
0.0059
0.089
0.15
K
0.017
0.022
0.44
0.55
Ø
0
8°
0
8°
DERATING CURVE
Resistive Element
Body
MAX.
A1
Molded epoxy
Copper alloy
Solder free leads,
Ni/Pd/Au plated
100
Percent of Rated Power
A
MILLIMETERS
MIN.
100 % = 0.2 W
80
60
40
20
0
0
70
125
155
Ambient Temperature °C
ENVIRONMENTAL TESTS
ENVIRONMENTAL TEST
High Temperature Exposure
Temperature Cycling
Moisture Resistance
Biased Humidity
Life
Mechanical Shock
Vibration
Resistance to Soldering Heat
CONDITIONS
SUGGESTED
PRODUCT
LIMITS
ABS/RATIO
MAX. VALUES
ABS/RATIO
< 1 k: MIL-STD-202, 108, 1000 h at 125 °C
± 0.5 %/± 0.5 %
± 0.35 %/± 0.35 %
> 1 k: MIL-STD-202, 108, 1000 h at 125 °C
± 0.25 %/± 0.1 %
± 0.02 %/± 0.008 %
JESD22, JA-104, 1000 cycles at - 55 °C to + 125 °C
± 0.25 %/± 0.1 %
± 0.1%/± 0.027 %
MIL-STD-202, 106
± 0.25 %/± 0.1 %
± 0.03%/± 0.012 %
MIL-STD-202, 103, 1000 h at 85 °C, 85 % RH, 10 % P
± 1.0 %/± 0.5 %
± 0.4 %/± 0.34 %
< 1 k: MIL-STD-202, 108 at 125 °C, 1000 h
± 0.5 %/± 0.5 %
± 0.35 %/± 0.35 %
> 1 k: MIL-STD-202, 108 at 125 °C, 1000 h
± 0.5 %/± 0.1 %
± 0.04 %/± 0.03 %
MIL-STD-202, 213, condition C
± 0.25 %/± 0.1 %
± 0.03 %/± 0.018 %
MIL-STD-204, 10 Hz to 2 kHz
± 0.25 %/± 0.1 %
± 0.02 %/± 0.047 %
MIL-STD-202, 210, condition B
± 0.25 %/± 0.1 %
± 0.13 %/± 0.24 %
< 1 k: AEC-Q200-002 at 500 V human body
± 0.5 %
± 0.50 %
> 1 k: AEC-Q200-002 at 1000 V human body
± 0.5 %
± 0.25 %
J-STD-002 method B and B1
Visual
Visual
Terminal Strength
AEC-Q200-006 at 1 kg for 60 s
± 0.25 %/± 0.1 %
± 0.02 %/± 0.018 %
Flame Retardance
AEC-Q200-001 para 4.0
Visual
Visual
Electrostatic Discharge
Solderability
Revision: 14-Jun-13
Document Number: 60113
9
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MPMA (Divider)
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: MPMA1003AWS
M
P
M
A
M
P
M
A
1
1
0
0
3
0
0
1
5
GLOBAL MODEL
(3 or 4 digits)
RESISTANCE
(4 or 8 digits)
MPMA
Ni/Pd/Au = e4
termination
First 3 digits are significant figures
and the last digit specifies the
number of zeros to follow. When
like values are required use total
resistance. When dual values are
required list both values.
Example:
(List R1 first in part number with dual
values)
1002 = 10K (5K/5K)
1003 = 100K (50K/50K)
10011002 = 1K/10K divider
0
TOLERANCE AND
RATIO TOLERANCE
Abs. Tol.
A = 0.1 %
B = 0.1 %
C = 0.25 %
D = 0.5 %
F=1%
Ratio
0.05 %
0.1 %
0.1 %
0.1 %
0.5 %
0
1
A
T
1
A
T
1
PACKAGING
TAPE AND REEL
T1 = 1000 min., 1000 mult (1)
T5 = 500 min., 500 mult
TF = Full reel 4000
TP = 100 min., 1 mult
(package unit single lot date
code)
TS = 100 min., 1 mult
Note
(1) Preferred packaging code
Revision: 14-Jun-13
Document Number: 60113
10
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MPD, MPDA
www.vishay.com
Vishay Dale Thin Film
Molded, SOT-143 Thin Film Resistor, Surface Mount Network
FEATURES
• Tight ratio tolerances to 0.05 %
• ± 2 ppm tracking
Available
• Standard values stocked
Available
• Standard JEDEC TO-253 package
Actual Size
Vishay Dale Thin Film MPD Series Dividers provide
± 2 ppm/°C tracking and a ratio tolerance as tight as
± 0.05 %, small size, and exceptional stability for all surface
mount applications. The standard SOT-143 package format
with unity and common standard resistance divider ratios
provide easy selection for most applications requiring
matched pair resistor elements. The ratios listed are
available for off the shelf convenience, if you require a
non-standard ratio, consult the applications engineering
group as we may be able to meet your requirements.
• Compliant to RoHS Directive 2002/95/EC
• Halogen-free according to IEC 61249-2-21
definition
Note
* Pb containing terminations are not RoHS compliant, exemptions
may apply
TYPICAL PERFORMANCE
ABSOLUTE
TCR
SCHEMATIC
4
4
R1
R1
R2
2
MPD
2
RATIO
0.1
0.05
3
(R1 ref)
1
25
ABSOLUTE
TOL.
3
R3
R2
1
TRACKING
STANDARD VALUES
MODEL
2
MPDA
MPD
MPDA
R1 ()
100K
50K
25K
20K
10K
5K
2K
1K
10K
R2 ()
100K
50K
25K
20K
10K
5K
2K
1K
10K
R3 ()
10K
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
Material
Passivated nichrome
Pin/Lead Number
4
Resistance Range
1000  to 100 k per resistor
TCR: Absolute
± 25 ppm/°C
TCR: Tracking
± 2 ppm/°C (typical)
Tolerance: Absolute
± 0.1 % to ± 1.0 %
Tolerance: Ratio
± 0.05 % to ± 0.5 %
Power Rating: Resistor
100 mW
Power Rating: Package
200 mW
Stability: Absolute
R ± 0.05 %
Stability: Ratio
R ± 0.015 %
Voltage Coefficient
0.1 ppm/V
Working Voltage
100 V max. not to exceed P x R
Operating Temperature Range
- 55 °C to + 125 °C
Storage Temperature Range
- 55 °C to + 150 °C
Noise
< - 25 dB
Thermal EMF
0.2 μV/°C
Shelf Life Stability: Absolute
R ± 0.01 %
Shelf Life Stability: Ratio
R ± 0.002 %
Note
• Tantalum nitride film is available on special orders
Revision: 20-Oct-11
CONDITIONS
- 55 °C to + 125 °C
- 55 °C to + 125 °C
+ 25 °C
+ 25 °C
Maximum at + 70 °C
Maximum at + 70 °C
2000 h at + 70 °C
2000 h at + 70 °C
1 year at + 25 °C
1 year at + 25 °C
Document Number: 60016
11
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MPD, MPDA
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in millimeters
DIMENSION
A
A1
A2
b
b1
b2
b3
c
c1
D
E
E1
e
e1
L
L1
N
Ø
D
e
e2
A A2
Seating
Plane
b2
E1 E
A1
B
3xb
e1
See View C
Ø
L
L1
b1
b3
With Plating
VIEW C
0.25
Gauge Plane
Seating Plane
c
c1
Base Metal
(b)
(b2)
MECHANICAL SPECIFICATIONS
Substrate Material
Silicon
Molded epoxy
Copper alloy
Lead (Pb)-free Option
0.40
0"
MAX.
1.22
0.15
1.07
0.50
0.45
0.89
0.84
0.20
0.16
3.04
2.64
1.40
0.60
8"
100
Precent of Rated Power
Passivated nichrome
Terminals
NOM.
0.90
0.40
0.80
0.10
2.90
1.30
1.92 BSC
0.20 BSC
0.50
0.54 REF.
4
-
DERATING CURVE
Resistive Element
Body
MIN.
0.80
0.05
0.75
0.30
0.30
0.76
0.76
0.08
0.08
2.80
2.10
1.20
100 % matte tin
Tin Lead Option
Sn85
Tin Lead and Lead (Pb)-free Finish
Plated
100 % = 0.20 W
80
60
40
20
0
0
70
125
150
Ambient Temperature °C
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: MPD1003AWS
M
M
P
D
1
0
0
3
A
W
S
P
D
T
2
0
0
1
A
T
1
GLOBAL MODEL
(3 or 4 digits)
RESISTANCE
(4 or 8 digits)
MPD
(Two resistors, tin lead)
MPDT
(Two resistors,
lead (Pb)-free) (e3)
The first 3 digits are significant
figures and the last digit
specifies the number of zeros
to follow. When like values are
required use total resistance.
Example:
1002 = 10K (5K/5K)
1003 = 100K (50K/50K)
TOLERANCE AND
RATIO TOLERANCE
Abs. Tol.
Ratio
A = ± 0.1 %
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F=±1%
± 0.05 %
± 0.1 %
± 0.1 %
± 0.1 %
± 0.5 %
PACKAGING
BS = BULK 100 min., 1 mult
WS = WAFFLE 100 min., 1 mult
TAPE AND REEL
T1 = 1000 min., 1000 mult (1)
Historical Part Number example: MPD1002BW (for reference purposes only)
MPD
1002
B
W
SERIES
RESISTANCE
TOLERANCE AND
RATIO TOLERANCE
PACKAGING
Note
(1) Preferred packaging code
Revision: 20-Oct-11
Document Number: 60016
12
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MPD, MPDA
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: MPDAT3002AWS
M
M
P
D
A
3
0
0
2
A
W
S
P
D
A
T
3
0
0
2
A
W
S
GLOBAL MODEL
(4 or 5 digits)
MPDA
(Three equal series
resistors, tin/lead)
MPDAT
(Three equal series
resistors, lead (Pb)-free)
(e3)
RESISTANCE
First 3 digits are significant
figures and the last digit
specifies the number of zeros
to follow. When like values are
required use total resistance.
Example:
3002 = Three 10 k resistors
TOLERANCE AND
RATIO TOLERANCE
Abs. Tol.
Ratio
A = ± 0.1 %
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F=±1%
± 0.05 %
± 0.1 %
± 0.1 %
± 0.1 %
± 0.5 %
PACKAGING
BS = BULK 100 min., 1 mult
WS = WAFFLE 100 min., 1 mult
TAPE AND REEL
T1 = 1000 min., 1000 mult (1)
Historical Part Number example: MPDA3002BT (for reference purposes only)
MPDA
3002
B
T
SERIES
RESISTANCE
TOLERANCE AND
RATIO TOLERANCE
PACKAGING
Note
(1) Preferred packaging code
Revision: 20-Oct-11
Document Number: 60016
13
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ORN
www.vishay.com
Vishay Dale Thin Film
Molded, 50 mil Pitch, Dual-In-Line Thin Film Resistor,
Surface Mount Network
FEATURES
• 0.068" (1.73 mm) maximum seated height
• Rugged molded case construction with no
Available
internal solder
Available
• Low temperature coefficient (± 25 ppm/°C)
• JEDEC MS-012 STD variation AA package
• Material categorization: For definitions of
compliance please see www.vishay.com/doc?99912
Actual Size
ORN series resistor networks feature four isolated resistors
with standard 50 mil pitch lead spacing. The networks
feature close TCR tracking and tight ratio tolerance and are
ideally suited for unity gain operational amplifier circuitry.
The standard resistance offering listed are available for
immediate delivery.
SCHEMATIC
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
TYPICAL PERFORMANCE
TCR
TOL.
8
7
6
ABSOLUTE
TRACKING
25
5
ABSOLUTE
RATIO
0.1
0.05
5
STANDARD RESISTANCE OFFERING (R1 =)
R1
R1
1
R1
2
49.9 
100 
500 
1 k
2 k
4.99 k
5 k
R1
3
4
10 k
20 k
50 k
100 k
200 k
500 k
Note
• Consult factory for additional values and schematics
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
Revision: 17-Sep-12
SPECIFICATIONS
Passivated nichrome
8
33  to 500 k per resistor
± 25 ppm/°C
± 5 ppm/°C
± 0.05 % to ± 1.0 %
± 0.01 % to ± 0.5 %
100 mW
400 mW
R ± 0.05 %
R ± 0.015 %
0.1 ppm/V (typical)
100 V max. not to exceed P x R
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 30 dB
0.08 μV/°C
R ± 0.01 %
R ± 0.002 %
CONDITIONS
- 55 °C to + 125 °C
- 55 °C to + 125 °C
+ 25 °C
+ 25 °C
Maximum at + 70 °C
Maximum at + 70 °C
2000 h at + 70 °C
2000 h at + 70 °C
1 year at + 25 °C
1 year at + 25 °C
Document Number: 60005
14
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ORN
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in inches and millimeters
DIMENSION
E
B
Resistance
Value Code
C
F
ORNA
xxxx
A
G
Date
Code
ø
D
H
Seating
Plane
I
INCHES
MILLIMETERS
A
0.154 ± 0.003
3.90 ± 0.09
B
0.016 ± 0.002
0.4 ± 0.06
C
0.050
1.27
D
0.193 ± 0.004
4.90 ± 0.1
E
0.008 ± 0.001
0.20 ± 0.03
F
0.032 ± 0.016
0.81 ± 0.4
G
0.236 ± 0.008
6.00 ± 0.2
H
0.068 max.
1.73
I
0.007 ± 0.003
0.18 ± 0.07
Ø
2° to 6°
2° to 6°
Note
• Marking - Vishay symbol, part number from ordering information
MECHANICAL SPECIFICATIONS
DERATING CURVE
Passivated nichrome
Substrate Material
Silicon
Body
100
Precent of Rated Power
Resistive Element
Molded epoxy
Terminals
Copper alloy
Lead (Pb)-free Option
100 % matte tin
Tin Lead Option
Sn90
Tin Lead and Lead (Pb)-free Finish
Plated
100 % = 0.40 W
80
60
40
20
0
0
70
125
150
Ambient Temperature °C
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: ORNA1002AUF
O
O
R
N
A
1
0
0
2
A
U
F
R
N
T
A
1
0
0
3
Z
T
S
GLOBAL MODEL
(3 or 4 digits)
SCHEMATIC
RESISTANCE
ORN
(Tin lead)
A = 4 isolated
equal resistors
The first 3 digits are significant
figures and the last digit
specifies the number of zeros
to follow. R designates the
decimal point.
ORNT
(Lead (Pb)-free)
(e3)
Example:
1002 = 10 k
1003 = 100 k
4991 = 4.99 k
50R0 = 50 
TOLERANCE AND
RATIO TOLERANCE
Abs. Tol.
A = ± 0.1 % (3)
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F=±1%
Q = ± 0.05 % (1)
Z = ± 0.1 % (1)
Ratio
± 0.05 %
± 0.1 %
± 0.1 %
± 0.1 %
± 0.5 %
± 0.01 %
± 0.025 %
PACKAGING
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult (2)
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel 3000
TS = 100 min., 1 mult
UF = TUBED
Historical Part Number example: ORNA1001F (for reference purposes only)
ORN
A
1001
F
SERIES
SCHEMATIC
RESISTANCE
TOLERANCE AND
RATIO TOLERANCE
Notes
(1) Tol. available 1K and up
(2) Preferred packaging code
(3) Ratio tolerance available 250  and up
Revision: 17-Sep-12
Document Number: 60005
15
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ORN (Divider)
www.vishay.com
Vishay Dale Thin Film
Molded, 50 mil Pitch, Dual-In-Line Thin Film Divider,
Surface Mount Resistor Network
FEATURES
• 0.068" (1.73 mm) maximum seated height
• Rugged molded case construction with no
internal solder (JEDEC MS-012 variation AA
package)
• Low TCR tracking ± 5 ppm/°C
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
Actual Size
Vishay Dale Thin Film ORN series Dividers provide optimum
ratio precision, small size and exceptional stability for most
applications. They offer a wide ratio range that is listed in the
selection guide and are available for immediate delivery. The
tight ratio tolerance offered on the standard ratios will
provide exceptional performance throughout life.
SCHEMATIC
8
7
6
Available
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
TYPICAL PERFORMANCE
TCR
TOL.
5
Available
ABSOLUTE
TRACKING
25
5
ABSOLUTE
RATIO
0.1
0.05
STANDARD RESISTANCE OFFERING (R1/R2)
R1
R2
1
R2
2
RATIO
100:1
50:1
25:1
20:1
10:1
5:1
2:1
R1
3
4
R1
100K
50K
25K
20K
10K
10K
10K
R2
1K
1K
1K
1K
1K
2K
5K
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
SPECIFICATIONS
Passivated nichrome
8
1000  to 100 k per resistor
CONDITIONS
-
± 25 ppm/°C
± 5 ppm/°C
± 0.1 %
± 0.05 %
100 mW
400 mW
R ± 0.05 %
R ± 0.015 %
< 0.1 ppm/V
100 V max. not to exceed P x R
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 30 dB
0.08 μV/°C
R ± 0.01 %
R ± 0.002 %
- 55 °C to + 125 °C
- 55 °C to + 125 °C
+ 25 °C
+ 25 °C
Maximum at + 70 °C
Maximum at + 70 °C
2000 h at + 70 °C
2000 h at + 70 °C
1 year at + 25 °C
1 year at + 25 °C
Note
• Tantalum nitride film is custom, consult factory
Revision: 17-Sep-12
Document Number: 60006
16
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ORN (Divider)
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in inches and millimeters
E
B
INCHES
MILLIMETERS
F
ORNA x-x
A
DIMENSION
Part
Number
C
G
Date
Code
D
ø
H
I
A
0.154 ± 0.003
3.90 ± 0.09
B
0.016 ± 0.002
0.4 ± 0.06
C
0.050
1.27
D
0.193 ± 0.004
4.90 ± 0.1
E
0.008 ± 0.001
0.20 ± 0.03
F
0.032 ± 0.016
0.81 ± 0.4
G
0.236 ± 0.008
6.00 ± 0.2
H
0.068 max.
1.73
I
0.007 ± 0.003
0.18 ± 0.07
Ø
2° to 6°
2° to 6°
Note
• Marking - Vishay symbol, part number from ordering information
MECHANICAL SPECIFICATIONS
DERATING CURVE
Passivated nichrome
Substrate Material
Silicon
Body
100
Precent of Rated Power
Resistive Element
Molded epoxy
Terminals
Copper alloy
Lead (Pb)-free Option
100 % matte tin
Tin Lead Option
Sn90
Tin Lead and Lead (Pb)-free Finish
Plated
100 % = 0.40 W
80
60
40
20
0
0
70
125
150
Ambient Temperature °C
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: ORNA5-1UF
O
O
R
N
A
R
N
T
A
GLOBAL MODEL
(4 or 5 digits)
ORNA
(Tin/lead)
1
5
-
1
0
0
-
RESISTANCE
(3, 4 or 5 digits)
2-1
5-1
10-1
20-1
25-1
50-1
100-1
ORNTA
(Lead (Pb)-free)
(e3)
1
U
F
U
F
PACKAGING
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel 3000
TS = 100 min., 1 mult
UF = TUBED
Historical Part Number example: ORNA2-1 (for reference purposes only)
ORNA2-1
2:1
10K
5K
2
PART NUMBER
DIVIDER NETWORK
R1 VALUE
R2 VALUE
R1/R2 RATIO
Revision: 17-Sep-12
Document Number: 60006
17
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ORNV (Divider)
www.vishay.com
Vishay Dale Thin Film
Molded, 50 mil Pitch, Dual-In-Line Thin Film Divider,
Surface Mount Resistor Network
FEATURES
•
•
•
•
Close ratio tolerance (0.05 %)
Tight TCR tracking ± 5 ppm/°C
Available
0.068" (1.73 mm) maximum seated height
Rugged molded case construction with no
Available
internal solder (JEDEC MS-012 variation AA
package)
• Compliant to RoHS Directive 2002/95/EC
• Halogen-free according to IEC 61249-2-21 definition
Actual Size
Vishay Dale Thin Film ORNV series voltage dividers provide
optimum ratio precision, small size and exceptional stability
for most applications. They offer a wide ratio range that is
listed in the selection guide and are available for immediate
delivery. The tight ratio tolerance offered on the standard
ratios will provide exceptional performance throughout life.
Note
* Pb containing terminations are not RoHS compliant, exemptions
may apply
TYPICAL PERFORMANCE
ABSOLUTE
TRACKING
25
5
ABSOLUTE
RATIO
0.1
0.05
TCR
TOL.
SCHEMATIC
8
7
6
STANDARD RESISTANCE OFFERING
5
R1
R1
R1
R1
R1 ()
(4 Voltage Divider Resistors)
R2 (REF)
1
2
3
2K
4
5K, 10K, 20K, 25K, 50K
R2 ()
(Reference)
2K
5K
10K
5K
10K
20K
25K
50K
Note
• Consult factory for additional values and schematics
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
Revision: 01-Sep-11
SPECIFICATIONS
Passivated nichrome
8
2 k to 50 k
± 25 ppm/°C
± 5 ppm/°C
± 0.1 %
± 0.05 %
100 mW
400 mW
R ± 0.05 %
R ± 0.015 %
< 0.1 ppm/V
100 V max. not to exceed P x R
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 30 dB
0.08 μV/°C
R ± 0.01 %
R ± 0.002 %
CONDITIONS
- 55 °C to + 125 °C
- 55 °C to + 125 °C
+ 25 °C
+ 25 °C
Maximum at + 70 °C
Maximum at + 70 °C
2000 h at + 70 °C
2000 h at + 70 °C
1 year at + 25 °C
1 year at + 25 °C
Document Number: 60112
18
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ORNV (Divider)
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in inches and millimeters
E
B
INCHES
MILLIMETERS
A
0.157
3.99
F
ORNV x-x
A
DIMENSION
Part
Number
C
G
B
0.0165 ± 0.005
0.4 ± 0.06
C
0.050
1.27
D
0.195 max.
4.93
E
0.008 ± 0.001
0.20 ± 0.03
Date
Code
F
0.028 ± 0.001
0.71 ± 0.02
G
0.239 ± 0.005
6.07 ± 0.13
H
0.068 max.
1.73
I
0.008 ± 0.002
0.22 ± 0.06
Ø
2° to 6°
2° to 6°
D
ø
H
I
Note
• Marking - Vishay symbol, part number from ordering information
MECHANICAL SPECIFICATIONS
DERATING CURVE
Passivated nichrome
Substrate Material
Silicon
Body
100
Precent of Rated Power
Resistive Element
Molded epoxy
Terminals
Copper alloy
Lead (Pb)-free Option
100 % matte tin
Tin Lead Option
Sn90
Tin Lead and Lead (Pb)-free Finish
Plated
100 % = 0.40 W
80
60
40
20
0
0
70
125
150
Ambient Temperature °C
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: ORNV50015001UF
O
O
R
N
V
5
0
0
1
5
0
0
1
U
F
R
N
T
V
5
0
0
1
5
0
0
1
U
F
GLOBAL MODEL
(4 or 5 digits)
ORNV
(Tin/lead)
ORNTV
(Lead (Pb)-free)
(e3)
RESISTANCE
(REF.) RESISTANCE
PACKAGING
R1
R2
The first 3 digits are
significant figures and
the last digit specifies
the number of zeros.
Example:
5001 = 5 k
The first 3 digits are
significant figures and
the last digit specifies
the number of zeros.
Example:
5001 = 5 k
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel 3000
TS = 100 min., 1 mult
UF = TUBED
Revision: 01-Sep-11
Document Number: 60112
19
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
OSOP
www.vishay.com
Vishay Dale Thin Film
Molded, 25 mil Pitch, Dual-In-Line Thin Film Resistor,
Surface Mount Network
FEATURES
• 0.068" (1.73 mm) maximum seated height
• Rugged molded case construction with no
internal solder
• JEDEC MO-137 variation AD
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
TYPICAL PERFORMANCE
TCR
SCHEMATIC
19
18
17
16
15
14
13
12
Available
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
OSOP Series resistor networks feature a space saving
25 mil lead pitch versus the current 50 mil pitch standard.
This allows users to reduce board space more than 50 %
over current standards. The OSOP Series feature 10
isolated resistors in a 20 lead style available for immediate
delivery in the standard values listed.
20
Available
11
TOL.
ABSOLUTE
TRACKING
25
5
ABSOLUTE
RATIO
0.1
0.05
STANDARD RESISTANCE OFFERING (R1 =)
1
2
3
4
5
6
7
8
9
10
500 
10 k
1 k
20 k
2 k
50 k
5 k
100 k
Note
• Consult factory for additional values and schematics
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
SPECIFICATIONS
CONDITIONS
Passivated nichrome
-
Pin/Lead Number
20
-
Resistance Range
500  to 100 k per resistor
-
± 25 ppm/°C
- 55 °C to + 125 °C
± 5 ppm/°C
- 55 °C to + 125 °C
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
± 0.1 % to 1 %
+ 25 °C
± 0.025 % to 0.5 %
+ 25 °C
Power Rating: Resistor
100 mW
Maximum at + 70 °C
Power Rating: Package
400 mW
Maximum at + 70 °C
Stability: Absolute
R ± 0.05 %
2000 h at + 70 °C
Stability: Ratio
R ± 0.015 %
2000 h at + 70 °C
Tolerance: Ratio
Voltage Coefficient
Working Voltage
< 0.1 ppm/V (typical)
100 V max. not to exceed
P x R
-
Operating Temperature Range
- 55 °C to + 125 °C
-
Storage Temperature Range
- 55 °C to + 150 °C
-
Noise
< - 30 dB
-
0.08 μV/°C
-
Shelf Life Stability: Absolute
R ± 0.01 %
1 year at + 25 °C
Shelf Life Stability: Ratio
R ± 0.002 %
1 year at + 25 °C
Thermal EMF
Revision: 20-Oct-11
Document Number: 60002
20
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
OSOP
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in inches and millimeters
A
J
D
Logo
Part
Number
Marking
E
C
B
PIN 1
Locator
I
F
Date
Code
H
G
DIMENSION
INCHES
MILLIMETERS
A
0.344
8.74
B
0.154
3.91
C
0.237
6.02
D
0.025
0.635
E
0.010 ± 0.002
0.25 ± 0.05
F
0.062
1.58
G
0.068
1.73
H
0.010 ± 0.002
0.25 ± 0.05
I
0.025
0.64
J
0.057
1.47
MECHANICAL SPECIFICATIONS
Resistive Element
Passivated nichrome
Substrate Material
Silicon
Body
Molded epoxy
Terminals
Copper alloy
Lead (Pb)-free Option
100 % matte tin
Tin Lead Option
Sn90
Tin Lead and Lead (Pb)-free Finish
Plated
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: OSOPA1002BUF
O
GLOBAL MODEL
(4 or 5 digits)
OSOP
(Tin Lead)
OSOPT
(Lead (Pb)-free)
(e3)
O
S
O
P
A
1
0
0
2
B
U
F
S
O
P
T
A
1
0
0
3
A
T
1
SCHEMATIC
RESISTANCE
A = 10 nominally
equal resistors
with each resistor
isolated from all
others and wires
directly across
First 3 digits are significant
figures and the last digit
specifies the number of
zeroes to follow.
Example:
1002 = 10K
1003 = 100K
TOLERANCE AND
RATIO TOLERANCE
Abs. Tol.
A = 0.1 % (1)
B = 0.1 %
C = 0.25 %
D = 0.5 %
F=1%
Z = 0.1 % (1)
Ratio
0.05 %
0.1 %
0.1 %
0.1 %
0.5 %
0.025 %
PACKAGING
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult (2)
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel 2500
TS = 100 min., 1 mult
UF = TUBED
Historical Part Number example: OSOPA5000B (for reference purposes only)
OSOP
A
5000
B
SERIES
SCHEMATIC
RESISTANCE
TOLERANCE AND
RATIO TOLERANCE
Notes
(1) Tolerance available 1K and up
(2) Preferred packaging code
Revision: 20-Oct-11
Document Number: 60002
21
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTSR, VSSR, VSOR
www.vishay.com
Vishay Dale Thin Film
Molded, 25 mil or 50 mil Pitch, Dual-In-Line Thin Film Resistor,
Surface Mount Network
FEATURES
Actual Size
Vishay Dale Thin Film resistor networks are designed to be
used in either analog or digital circuits. The use of thin film
resistive elements within the network allows you to achieve
an infinite number of very low noise and high stability circuits
for industrial, medical and scientific instrumentation. Vishay
Dale Thin Film resistor networks are packaged in molded
plastic packages with sizes that are recognized throughout
the world. The rugged packaging offers superior
environmental protection and consistent dimensions for
ease of placement with automatic SMT equipment. Vishay
Dale Thin Film stocks many designs and values for
off-the-shelf convenience. With Vishay Dale Thin Film you
can depend on quality products delivered on time with
service backing the product.
• Reduces total assembly costs
• Compatible with automatic surface mounting
equipment
• UL 94 V-0 flame resistant
• Thin film tantalum nitride on silicon
• Choice of package sizes: VTSR (TSSOP)
JEDEC MC-153, VSSR (SSOP or QSOP)
JEDEC MS-137, VSOR (SOIC narrow) JEDEC MS-012
• Moisture sensitivity level 1 (per IPC/JEDEC STD-20C)
• Isolated/bussed/dual terminator/differential terminator
circuits
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL PERFORMANCE
ABSOLUTE
TCR
TOL.
TRACKING
100
NA
ABSOLUTE
RATIO
5, 2, 1
NA
SCHEMATICS
01 SCHEMATIC
Resistance Range:
10 Ω to 47 kΩ
Lead #1
03 SCHEMATIC
Resistance Range:
10 Ω to 47 kΩ
Lead #1
05 SCHEMATIC
R1
R1
R2
R1
R2
R1
R2
R1
R2
R1
R2
R1
R2
R2
R1
R2
R2
R1
R1
R2
R2
R2
R1
R1
R1
R2
R1
R2
Pin 1
47 SCHEMATIC
VCC
R1
R2
R3
Lead #1
Revision: 08-Jan-12
RESISTORS WITH ONE PIN COMMON
The 01 circuit provides nominally equal resistors
connected between a common pin and a discrete PC
board pin.
Commonly used in the following applications:
• MOS/ROM
• TTL input pull-down
pull-up/-down
• Digital pulse squaring
• Open collector pull-up
• TTL unused gate pull-up
• “Wired OR” pull-up
• High speed parallels
pull-up
• Power driven pull-up
Broad selection of standard values available
ISOLATED RESISTORS
The 03 circuit provides nominally equal resistors isolated
from all others and wired directly across.
Commonly used in the following applications:
• “Wired OR” pull-up
• Long-line impedance
balancing
• Power driven pull-up
• LED current limiting
• Powergate pull-up
• ECL output pull-down
• Line termination
• TTL input pull-down
Broad selection of standard values available
DUAL-LINE TERMINATOR; PULSE SQUARING
The 05 circuit contains pairs of resistors connected
between ground and a common line. The junctions of
these resistor pairs are connected to the input leads. The
05 circuits are designed for dual-line termination and pulse
squaring.
Standard values are:
VSSR1605:
VSSR2005:
R1 = 220 , R2 = 330 
R1 = 220 , R2 = 330 
R1 = 330 , R2 = 470 
R1 = 220 , R2 = 1.8 k
R1 = 1.5 k, R2 = 3.3 k
DIFFERENTIAL TERMINATOR
The 47 schematic consists of series resistor sections
connected between VCC and ground. Each contains 3
resistors of 2 different resistance values.
Standard values are:
VSSR20 and VTSR20:
VSSR16 and VTSR16:
R1 = 270 , R2 = 120 
R1 = 330 , R2 = 150 
R1 = 330 , R2 = 220 
GND
Document Number: 60003
22
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTSR, VSSR, VSOR
www.vishay.com
Vishay Dale Thin Film
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
SPECIFICATIONS
Tantalum nitride
16, 20, 24
10  to 47 k
± 100 ppm/°C
n/a
± 5 % standard (± 2 % available)
± 1 % standard (check factory)
NA
100 mW max.
16 = 1.0 W, 20 = 1.2 W, 24 = 1.4 W
5 ppm/V (typical)
50 VDC
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 35 dB
-
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
CONDITIONS
Per E-24 table
- 55 °C to + 125 °C
Per E-24 table
Per E-96 table
At + 70 °C
0 °C to + 70 °C
-
DIMENSIONS AND IMPRINTING in inches (millimeters)
B
C
Part Marking-Model, Pin Count (Optional), Schematic
E
Resistance
Value
Code
xxxx
F
Date
Code
H
G
Pin #1
J
A
W
D
DIMENSION
A - 16 PIN
A - 20 PIN
A - 24 PIN
B (Ref.)
C (Ref.)
D
E (Typ.)
F
G
H
J (Ref.)
W
VTSR-xxxx
0.206 ± 0.003 (5.23 ± 0.08)
0.256 ± 0.003 (6.50 ± 0.08)
0.306 ± 0.003 (7.77 ± 0.08)
0.0256 (0.65)
0.0087 (0.22)
0.004 (0.10)
0.024 (0.61)
0.173 ± 0.003 (4.39 ± 0.08)
0.015 × 45° (0.38)
0.252 ± 0.005 (6.40 ± 0.13)
0.005 (0.13)
0.043 ± 0.005 (1.09 ± 0.13)
VSSR-xxxx
0.193 ± 0.004 (4.90 ± 0.010)
0.341 ± 0.003 (8.66 ± 0.08)
0.341 ± 0.003 (8.66 ± 0.08)
0.025 (0.64)
0.010 (0.25)
0.006 (0.15)
0.025 (0.64)
0.154 ± 0.003 (3.91 ± 0.08)
0.015 × 45° (0.38)
0.236 ± 0.008 (5.99 ± 0.20)
0.010 (0.25)
0.064 ± 0.005 (1.63 ± 0.13)
VSOR-xxxx
0.390 ± 0.010 (9.91 ± 0.25)
NA
NA
0.050 (1.27)
0.016 (0.41)
0.008 (0.20)
0.030 (0.76)
0.152 ± 0.003 (3.86 ± 0.08)
0.015 × 45° (0.38)
0.236 ± 0.005 (5.99 ± 0.13)
0.008 (0.20)
0.064 ± 0.005 (1.63 ± 0.13)
MARKING
MODEL
PIN COUNT
(Optional)
VXXX
XX
XX
VSOR
VSSR
VTSR
16
20
24
01, 03,
05 or 47
Revision: 08-Jan-12
SCHEMATIC
RESISTANCE
RESISTANCE
DATE CODE
XXXX
XXX
XXXX
1 % RESISTANCE
e.g.: 43R2
4 digits are used to express
ohmic values only less than
100 . R is used to designate
the decimal position
1 %, 2 %, 5 % RESISTANCE
e.g.: 103 = 10K
The first 2 digits are significant
figures, the last digit specifies
the number of zeros to follow.
OR
Document Number: 60003
23
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTSR, VSSR, VSOR
www.vishay.com
Vishay Dale Thin Film
MECHANICAL SPECIFICATIONS
Resistive Element
Tantalum nitride
Substrate Material
Silicon
Body
Molded epoxy
Terminals
Copper alloy
Plating
100 % matte tin
Lead Coplanarity
0.0005"
Marking Resistance to Solvents
Permanency testing per MIL-STD-202, method 215
PACKAGING INFORMATION
LEADS
TAPE AND REEL
TUBES
16
2500
94
20
2500
74
24
2500
62
16
2500
98
20
2500
55
24
2500
55
16
2500
48
VTSR (TSSOP)
VSSR (QSOP)
VSOR (SOIC)
100
Precent of Rated Power
MODEL
DERATING CURVE
80
60
40
20
0
0
70
125
150
Ambient Temperature °C
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: VTSR1601103JTF
V
T
S
R
1
6
0
1
V
S
O
R
1
6
0
5
GLOBAL MODEL
PIN COUNT
SCHEMATIC
VTSR
VSSR
VSOR
Lead (Pb)-free (e3)
date code > 2705
20 (not VSOR)
24 (not VSOR)
01 (bussed)
03 (isolated)
16 (not VTSR)
20 (not VSOR)
05 (terminator)
47 (terminator)
1
3
3
0
1
RESISTANCE
(3, 4 or 6 digits)
3
4
7
1
J
T
F
G
T
F
TOLERANCE
PACKAGING
XXX:  100R and all 1 %,
2 % and 5 %
First 2 digits are significant
figures. Last digit specifies
number of zeros to follow.
XXXX: < 100R 1 %
First 3 digits are significant
figures. Last digit specifies
number of zeros to follow.
F = 1.0 %
G = 2.0 %
J = 5.0 %
TAPE AND REEL
TF = Full reel 2500
UF = Tubed
xxx xxx
First 2 digits are significant
figures. Last digit specifies
number of zeros.
G = 2.0 %
J = 5.0 %
Historical Part Number example: VSSR2001102GT/R (for reference purposes only)
VSSR
20
01
102
G
T/R
MODEL
PIN COUNT
SCHEMATIC
RESISTANCE
TOLERANCE
PACKAGING
Revision: 08-Jan-12
Document Number: 60003
24
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NOMC
www.vishay.com
Vishay Dale Thin Film
Molded, 50 mil Pitch, Dual-In-Line Thin Film Resistor,
Narrow Body, Surface Mount Network
FEATURES
• Standard 14 pins and 16 pins counts
(0.150" narrow body) JEDEC MS-012
variation AB and AC
Available
• Rugged molded case construction
Actual Size
The NOMC series features a standard 14 pins and 16 pins
narrow body (0.150") small outline surface mount style. It
can accommodate resistor networks to your particular
application requirements. The networks can be constructed
with passivated nichrome (standard), or tantalum nitride (1)
resistor films to optimize performance.
Note
(1) Available
upon request. Resistance value range and
performance differs from passivated nichrome standard
electrical specifications on datasheet, consult factory.
Available
• Excellent long term ratio stability
(R ± 0.015 %)
• Low TCR tracking ± 5 ppm/°C
• Isolated and bussed schematics
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
TYPICAL PERFORMANCE
ABSOLUTE
TCR
TOL.
TRACKING
25
5
ABSOLUTE
RATIO
0.10
0.05
SCHEMATICS
NOMC1401 or NOMCT1401
NOMC1403 or NOMCT1403
NOMC1601 or NOMCT1601
NOMC1603 or NOMCT1603
The 01 circuit provides a choice of 13 or 15 equal value
resistors each connected between a common lead (14 or
16). Custom schematics available.
The 03 circuit provides a choice of 7 or 8 equal value
resistors each connected between a common lead (14 or
16). Custom schematics available.
STANDARD RESISTANCE OFFERING (Equal Value Resistors)
ISOLATED (03) SCHEMATIC
BUSSED (01) SCHEMATIC
1 k
10 k
2 k
20 k
5 k
10 k
20 k
100 k
Note
• Consult factory for additional values
Revision: 08-Jan-13
Document Number: 60007
25
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NOMC
www.vishay.com
Vishay Dale Thin Film
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
CONDITIONS
Passivated nichrome (standard)
Tantalum nitride (available upon request)
-
14, 16
-
100  to 50 k each resistor (bussed (01) schematic)
-
Material
Pin/Lead Number
Resistance Range
100  to 100 k each resistor (isolated (03) schematic)
TCR: Absolute
± 25 ppm/°C (standard)
- 55 °C to + 125 °C
TCR: Tracking
± 5 ppm/°C (typical)
- 55 °C to + 125 °C
± 0.10 % to ± 1 %
+ 25 °C
± 0.025 % to ± 0.1 %
+ 25 °C
Tolerance: Absolute
Tolerance: Ratio
100 mW ((typical) (03) schematic)
Power Rating: Resistor
Maximum at + 70 °C
50 mW ((01) schematic)
Power Rating: Package
400 mW/500 mW
Maximum at + 70 °C
Stability: Absolute
R ± 0.05 %
2000 h at + 70 °C
Stability: Ratio
R ± 0.015 %
2000 h at + 70 °C
Voltage Coefficient
< 0.1 ppm/V
Working Voltage
-
100 V max. not to exceed
-
P x R
Operating Temperature Range
- 55 °C to + 125 °C
Storage Temperature Range
- 55 °C to + 150 °C
-
 - 30 dB
-
Noise
Thermal EMF
-
0.08 μV/°C
-
Shelf Life Stability: Absolute
R ± 0.01 %
1 year at + 25 °C
Shelf Life Stability: Ratio
R ± 0.002 %
1 year at + 25 °C
DIMENSIONS AND IMPRINTING in inches and millimeters
DIMENSION
H E
Index Area
PIN 1 Locator
h x 45°
O
C
e
A
B
L
A1
14
16
INCHES
MILLIMETERS
INCHES
MILLIMETERS
H
0.235
5.969
0.235
5.969
E
0.154
3.911
0.154
3.91
O
0.340
8.363
0.390
9.906
A
0.063
1.60
0.063
1.60
e
0.050
1.270
0.050
1.270
B
0.015
0.381
0.015
0.381
C
0.008
0.203
0.008
0.203
L
0.025
0.635
0.025
0.635
A1
0.006
0.152
0.006
0.152
h
0.015
0.381
0.015
0.381
MECHANICAL SPECIFICATIONS
Resistive Element
Substrate Material
Body
Terminals
Lead (Pb)-free Option
Passivated nichrome
Silicon
Molded epoxy
Copper alloy
100 % matte tin
Tin Lead Option
Sn90
Tin Lead and Lead (Pb)-free Finish
Plated
Note
• Available upon request. Resistance value range and performance differs from passivated nichrome standard electrical specifications on
datasheet, consult factory.
Revision: 08-Jan-13
Document Number: 60007
26
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NOMC
www.vishay.com
Vishay Dale Thin Film
ORDERING INFORMATION CHECK LIST (Customs)
Special requirements should be identified in advance, but as a minimum, you should have the following information ready.
ELECTRICAL
MECHANICAL
1. Maximum allowable seated height (from PC board to top of
network)
2. Special marking concerns
3. Schematic pin out of package
1. Resistors, by value and tolerance
2. Reference resistor(s) and matching of which resistors to which
reference resistors
3. Reference by ratio
4. Absolute temperature coefficient of resistivity
5. Temperature tracking of subordinate resistors to reference
resistor(s)
6. Maximum operating voltage
7. Resistor power ratings
8. Operating temperature range
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: NOMC16031002BUF
N
N
O
M
C
1
6
0
3
1
0
0
2
B
U
F
O
M
C
T
1
4
0
3
1
0
0
3
Z
T
1
GLOBAL MODEL
(4 or 5 digits)
PINS
SCHEMATIC
RESISTANCE
NOMC
(Tin Lead)
14
16
01 = 13 or 15
bussed
equal value
resistors
03 = 7 or 8
isolated
equal value
resistors
First 3 digits are
significant figures
and the last digit
specifies the number
of zeros to follow.
NOMCT
(Lead (Pb)-free)
(e3)
Example:
1002 = 10K
1003 = 100K
TOLERANCE AND
RATIO TOLERANCE
Abs. Tol.
Ratio
(1)
A = 0.1 %
B = 0.1 %
C = 0.25 %
D = 0.5 %
F=1%
Z = 0.1 % (1)
0.05 %
0.1 %
0.1 %
0.1 %
0.5 %
0.025 %
PACKAGING
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult (2)
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel 2500
TS = 100 min., 1 mult
UF = TUBED
Historical Part Number example: NOMC16031002Z (for reference purposes only)
NOMC
16
03
1002
Z
SERIES
PINS
SCHEMATIC
RESISTANCE
TOLERANCE AND
RATIO TOLERANCE
Notes
(1) Tolerance available 1K and up
(2) Preferred packaging code
Revision: 08-Jan-13
Document Number: 60007
27
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NOMCA
www.vishay.com
Vishay Dale Thin Film
Molded, 50 mil Pitch, Dual-In-Line Thin Film Resistor,
Precision Automotive, AEC-Q200 Qualified, Networks
FEATURES
• Standard 14 pins and 16 pins counts
(0.150" narrow body) JEDEC MS-012
variation AB and AC
• Rugged molded case construction
• Excellent long term ratio stability
(R ± 0.015 %)
• Low TCR tracking ± 5 ppm/°C
• AEC-Q200 ESD rated 1 kV (< 10 k)
The NOMCA series features a standard 14 pin or 16 pin
narrow body (0.150") small outline SMT package. The
network is constructed with tantalum nitride resistor film on
high purity alumina substrate for improved ESD and
moisture protection. Custom schematics are available
consult factory.
• AEC-Q200 ESD rated 2 kV (>10 k)
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL PERFORMANCE
ABSOLUTE
TCR
TOL.
TRACKING
25
5
ABSOLUTE
RATIO
0.10
0.05
SCHEMATICS
1403
1603
The 03 circuit provides a choice of 7 or 8 equal value resistors each connected between a common lead (14 or 16). Custom
schematics available.
STANDARD RESISTANCE OFFERING (Equal Value Resistors)
ISOLATED (03) SCHEMATIC
1 k
2 k
5 k
10 k
20 k
50 k
Note
• Consult factory for additional values
Revision: 30-Mar-12
Document Number: 60117
28
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NOMCA
www.vishay.com
Vishay Dale Thin Film
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
CONDITIONS
Tantalum nitride (Ta2N)
-
Pin/Lead Number
14, 16
-
Resistance Range
1 k to 50 k each resistor
-
TCR: Absolute
± 25 ppm/°C (standard)
- 55 °C to + 125 °C
TCR: Tracking
± 5 ppm/°C (typical)
- 55 °C to + 125 °C
± 0.10 % to ± 1 %
+ 25 °C
± 0.05 % to ± 0.1 %
+ 25 °C
Power Rating: Resistor
100 mW ((typical) (03) schematic)
Maximum at + 70 °C
Power Rating: Package
400 mW/500 mW
Maximum at + 70 °C
Stability: Absolute
R ± 0.05 %
1000 h at + 125 °C
Stability: Ratio
R ± 0.015 %
1000 h at + 125 °C
< 0.1 ppm/V
-
Material
Tolerance: Absolute
Tolerance: Ratio
Voltage Coefficient
Working Voltage
100 V max. not to exceed
-
P x R
Operating Temperature Range
- 55 °C to + 125 °C
-
Storage Temperature Range
- 55 °C to + 150 °C
-
 - 30 dB
-
0.08 μV/°C
-
Shelf Life Stability: Absolute
R ± 0.01 %
1 year at + 25 °C
Shelf Life Stability: Ratio
R ± 0.002 %
1 year at + 25 °C
Noise
Thermal EMF
DIMENSIONS AND IMPRINTING in inches and millimeters
DIMENSION
H E
Index Area
PIN 1 Locator
h x 45°
O
C
e
A
B
L
A1
14
16
INCHES
MILLIMETERS
INCHES
MILLIMETERS
H
0.235
5.969
0.235
5.969
E
0.154
3.911
0.154
3.910
O
0.340
8.363
0.390
9.906
A
0.063
1.600
0.063
1.600
e
0.050
1.270
0.050
1.270
B
0.015
0.381
0.015
0.381
C
0.008
0.203
0.008
0.203
L
0.025
0.635
0.025
0.635
A1
0.006
0.152
0.006
0.152
h
0.015
0.381
0.015
0.381
MECHANICAL SPECIFICATIONS
Resistive Element
Substrate Material
Body
Terminals
Lead (Pb)-free Option
Revision: 30-Mar-12
Tantalum nitride (Ta2N)
Ceramic
Molded epoxy
Copper alloy
100 % matte tin plate or Ni/Pd/Au solder free option
Document Number: 60117
29
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NOMCA
www.vishay.com
Vishay Dale Thin Film
ORDERING INFORMATION CHECK LIST (Customs)
Special requirements should be identified in advance, but as a minimum, you should have the following information ready.
ELECTRICAL
MECHANICAL
1. Maximum allowable seated height (from PC board to top of
network)
2. Special marking concerns
3. Schematic pin out of package
1. Resistors, by value and tolerance
2. Reference resistor(s) and matching of which resistors to
whichreference resistors
3. Reference by ratio
4. Absolute temperature coefficient of resistivity
5. Temperature tracking of subordinate resistors to reference
resistor(s)
6. Maximum operating voltage
7. Resistor power ratings
8. Operating temperature range
ENVIRONMENTAL TESTS (Vishay Performance vs. AEC-Q200 Requirements)
ENVIRONMENTAL TEST
CONDITONS
LIMITS PER
AQEC-Q200
TYPICAL VISHAY
PERFORMANCE
< 10K
TYPICAL VISHAY
PERFORMANCE
> 10K
Resistance Temperature
Characteristic
- 55 °C to + 125 °C
± 25 ppm/°C
15 ppm/°C
15 ppm/°C
Max. Ambient Temperature
at Rated Wattage
+ 70 °C
+ 70 °C
+ 70 °C
Max. Ambient Temperature
at Power Derating
+ 150 °C
+ 150 °C
+ 150 °C
R
MIL-STD-202, 108, 1000 h at 125 °C
± 0.20 %
0.005 %
0.012 %
Temperature Cycling
R
JESD22, A104, 1000 cycles,
- 55 °C to + 125 °C
± 0.25 %
0.004 %
0.004 %
Moisture Resistance
R
MIL-STD-202 method 106
± 0.20 %
0.007 %
0.007 %
R
MIL-STD-202, 103, 1000 h at 85 °C,
85 % RH, 10 % P
± 0.25 %
0.021 %
0.033 %
High Temperature Exposure
Biased Humidity
Life
R
MIL-STD-202, 108, 1000 h at 125 °C
± 0.10 %
0.012 %
0.029 %
Mechanical Shock
R
MIL-STD-202 method 213, condition C
± 0.25 %
0.001 %
0.001 %
Vibration
R
MIL-STD-202 method 204,
10 Hz to 2 kHz
± 0.25 %
0.001 %
0.001 %
Resistance to Soldering Heat
R
MIL-STD-202, 204, condition B
± 0.10 %
- 0.002 %
0.001 %
R
AEC-Q200-002 at 1 kV, human body
± 0.50 %
0.065 %
AEC-Q200-002 at 2 kV, human body
± 0.50 %
J-STD-002 method B and B1
95 %
Electrostatic Discharg
Solderability
Terminal Strenght
R
0.170 %
Acceptable
Acceptable
AEC-Q200-006 at 1 kg for 60 s
Acceptable
Acceptable
AEC-Q200-001 Para 4.0
Acceptable
Acceptable
Flame Retardance
DERATING CURVE
Precent of Rated Power
100
100 % =
400 mW (14p)
500 mW (16p)
80
60
40
20
0
0
70
125
150
Ambient Temperature °C
Revision: 30-Mar-12
Document Number: 60117
30
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NOMCA
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: NOMCA14031002BUF
N
O
GLOBAL MODEL
(4 or 5 digits)
NOMCA
(Lead (Pb)-free)
(e3)
M
C
A
1
4
0
3
PINS
SCHEMATIC
RESISTANCE
14
16
03 = 7 or 8
isolated
equal value
resistors
First 3 digits are
significant figures
and the last digit
specifies the number
of zeros to follow.
Example:
1002 = 10K
1
0
0
TOLERANCE AND
RATIO TOLERANCE
Abs. Tol.
Ratio
A = 0.1 % (1)
B = 0.1 %
C = 0.25 %
D = 0.5 %
F=1%
0.05 %
0.1 %
0.1 %
0.1 %
0.5 %
2
A
T
1
PACKAGING
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult (2)
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel 2500
TS = 100 min., 1 mult
UF = TUBED
Notes
(1) Tolerance available 1K and up
(2) Preferred packaging code
Revision: 30-Mar-12
Document Number: 60117
31
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TOMC
www.vishay.com
Vishay Dale Thin Film
Molded, 50 mil Pitch, Dual-In-Line Thin Film Resistor,
Surface Mount Network
FEATURES
Actual Size
Vishay Dale Thin Film offers standard circuits in 16 pins in a
medium body molded surface mount package. The
networks are available over a resistance range of 100  to
100 k. The network features tight ratio tolerances and
close TCR tracking. In addition to the standards shown,
custom circuits are available upon request.
• 0.090" (2.29 mm) maximum seated height
• Rugged, molded case construction (0.22"
wide)
Available
• Highly stable thin film ratio stability
(R ± 0.015 % at 70 °C for 2000 h)
Available
• Low temperature coefficient, ± 25 ppm/°C
(- 55 °C to + 125 °C)
• Wide resistance range 100  to 100 k
• Isolated/bussed circuits
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
TYPICAL PERFORMANCE
ABSOLUTE
TRACKING
25
5
ABSOLUTE
RATIO
0.1
0.025
TCR
TOL.
SCHEMATIC
The 01 circuit provides 15
nominally equal resistors,
each connected between
a common lead (16) and a
discrete PC board pin.
Ref.
The 03 circuit provides a
choice of 8 nominally
equal resistors with each
resistor isolated from all
others and wired directly
across.
Ref.
PIN 1
PIN 1
TOMC-1603
03 circuit
TOMC-1601
01 circuit
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
Revision: 08-Jan-13
SPECIFICATIONS
Passivated nichrome
16
100  to 100 kper resistor
± 25 ppm/°C
± 5 ppm/°C
± 0.1 % to 1 %
± 0.025 % to 0.5 %
50 mW = PIN 16 common
100 mW = isolated
750 mW
R ± 0.05 %
R ± 0.015 %
0.1 ppm/V
100 V max. not to exceed P x R
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 30 dB
0.08 μV/°C
R ± 0.01 %
R ± 0.002 %
CONDITIONS
- 55 °C to + 125 °C
- 55 °C to + 125 °C
+ 25 °C
+ 25 °C
Maximum at + 70 °C
Maximum at + 70 °C
2000 h at + 70 °C
2000 h at + 70 °C
1 year at + 25 °C
1 year at + 25 °C
Document Number: 60008
32
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TOMC
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in inches and millimeters
DIMENSION
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
R
S
A
G
D
E Typical
H
Part Number
Date
Code
Vishay
Symbol
Lead #1
Indicator
Centered
7°
F Maximum J
Marking
7°
Area
TOMC-XX
B
Centered Maximum,
Marking Area
M
K
L ± 0.015
(1.27)
Q
P
R
C
S
7°
N
7°
MECHANICAL SPECIFICATIONS
Passivated nichrome
Substrate Material
Silicon
Sn85
Tin Lead and Lead (Pb)-free Finish
Plated
Single
Resistor
0.085 W
0.045 W
100 % matte tin
Tin Lead Option
0.48 W
Power
Copper alloy
Lead (Pb)-free Option
TOMC-1601,
TOMC-1603
0.75 W
0.65 W
Molded epoxy
Terminals
MILLIMETERS
8.89
10.16
11.176
1.27
0.457
4.06
2.03
0.914
5.59
6.20
7.52
1.14
0.076
1.27
0.203
2.16
0.076
DERATING CURVE
Resistive Element
Body
INCHES
0.350
0.400
0.440
0.050
0.018
0.160
0.08
0.036
0.22
0.244
0.30
0.045
0.003
0.005
0.008
0.085
0.003
0.05 W
- 50 °C
- 25 °C
+ 70 °C + 125 °C + 150 °C
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: TOMC16031002BUF
T
T
O
M
C
1
6
0
3
1
0
0
2
B
U
F
O
M
C
T
1
6
0
1
1
0
0
3
Z
T
1
GLOBAL MODEL
(4 or 5 digits)
TOMC
(Tin lead)
PINS
SCHEMATIC
RESISTANCE
16
01 = 15 bussed
equal resistors
First 3 digits are
significant figures and
the last digit specifies
the number of zeros
to follow.
03 = 7 or 8
isolated equal
resistors
TOMCT
(Lead (Pb)-free)
(e3)
Example:
1002 = 10K
1003 = 100K
TOLERANCE AND
RATIO TOLERANCE
Abs. Tol.
Ratio
A = 0.1 % (1)
B = 0.1 %
C = 0.25 %
D = 0.5 %
F=1%
Z = 0.1 % (2)
0.05 %
0.1 %
0.1 %
0.1 %
0.5 %
0.025 %
PACKAGING
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult (3)
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel 2000
TS = 100 min., 1 mult
UF = TUBED
Historical Part Number example: TOMC16011002Z (for reference purposes only)
TOMC
16
01
1002
Z
SERIES
NUMBER OF LEADS
SCHEMATIC
RESISTANCE
TOLERANCE AND
RATIO TOLERANCE
Notes
(1) Tolerance available 250 and up
(2) Tolerance available 1K and up
(3) Preferred packaging code
Revision: 08-Jan-13
Document Number: 60008
33
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VSOR2000S1
www.vishay.com
Vishay Dale Thin Film
Molded, 50 mil Pitch, Dual In-Line Thin Film Resistor,
Surface Mount Network
FEATURES
•
•
•
•
•
•
•
Actual Size
Rugged, molded case construction
Reduces total assembly costs
Saves board space
Compatible with surface mounting equipment
Uniform performance characteristics
Compliant to RoHS Directive 2002/95/EC
Halogen-free according to IEC 61249-2-21 definition
TYPICAL PERFORMANCE
V.35 termination network used to insure signal integrity
between transmitter and receiver sections of V.35 protocol.
ABSOLUTE
TRACKING
100
10
ABSOLUTE
RATIO
1, 2
0.5
TCR
TOL.
SCHEMATIC
20
19
50
18
16
17
50
50
Notes
• Pad 7 does not exist
• PIN 7 is an open circuit
1
51.5
3
50
125
124
2
13
14
50
125
51.5
15
51.5
4
51.5
11
50
125
124
5
12
6
51.5
8
51.5
124
9
10
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
Revision: 20-Oct-11
SPECIFICATIONS
Tantalum nitride
20
50  to 125 
± 100 ppm/°C
± 10 ppm/°C
± 1 %, ± 2 %
0.5 %
1.6 W
- 55 °C to + 125 °C
- 55 °C to + 150 °C
-
CONDITIONS
- 55 °C to + 125 °C
- 55 °C to + 125 °C
± 1 %: 51.5  and 124 
± 2 %: 50.0  and 125 
- 55 °C to + 125 °C
-
Document Number: 60009
34
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VSOR2000S1
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in inches and millimeters
B
Part
Number
Date
Code
DIMENSION
INCHES
MILLIMETERS
A
0.500 ± 0.010
12.7 ± 0.25
B (Ref.)
0.050
1.27
C (Ref.)
0.016
0.41
C
E
VSOR20
00S1
H
F
D
0.008
0.20
E (Typ.)
0.030
0.75
G
PIN 1
A
J
0.406 ± 0.005
10.31 ± 0.13
0.010
0.25
W
0.100 ± 0.005
1.54 ± 0.13
Substrate Material
Silicon
100
Precent of Rated Power
Tantalum nitride
Molded epoxy
Copper alloy
Plating
Tin lead solder
Lead coplanarity
0.0005"
Marking Resistance to Solvents
0.64 x 45°
DERATING CURVE
Resistive Material
Terminals
7.44 ± 0.08
0.025 x 45°
H
MECHANICAL SPECIFICATIONS
Body
0.293 ± 0.003
J (Ref.)
W
D
F
G
Permanency testing per
MIL-STD-202, method 215
80
60
40
20
0
100 % matte tin
Plated
Lead (Pb)-free
0
70
125
150
Ambient Temperature °C
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: VSOR2000S1T1
V
S
O
R
2
0
0
0
S
1
T
GLOBAL MODEL
PACKAGING
VSOR2000S1
TAPE AND REEL
TF = Full reel 2500
F
UF = TUBED
Historical Part Number example: VSOR2000S1T/R (for reference purposes only)
Revision: 20-Oct-11
VSOR 2000S1
T/R
MODEL# VALUE
PACKAGING
Document Number: 60009
35
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
WOMC
www.vishay.com
Vishay Dale Thin Film
Molded, 50 mil Pitch, Dual In-Line Thin Film Resistor, Wide Body,
Surface Mount Network
FEATURES
Actual Size
20 Pin
The WOMC series features a standard 16 pins and 20 pins
wide body (0.30") small outline surface mount style that can
accommodate resistor networks to your particular
application requirements. The networks can be constructed
with passivated nichrome, or tantalum nitride resistor films
to optimize performance.
• Standard 16 pins and 20 pins counts
(0.300" wide body) JEDEC MS-013 variation
AA and AC
Available
• Rugged, molded case construction
• High stable in element ratio stability
Available
(R ± 0.015 % at 70 °C for 2000 h)
• Leads copper alloy, solderable
• Material categorization: For definitions of
compliance please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
TYPICAL PERFORMANCE
TCR
TOL.
ABSOLUTE
TRACKING
25
5
ABSOLUTE
RATIO
0.1
0.05
SCHEMATIC
Custom schematics available
Please contact factory
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
Revision: 20-Oct-11
SPECIFICATIONS
Passivated nichrome or tantalum nitride
16, 20
100  to 500 k total resistance
± 25 ppm/°C to ± 50 ppm/°C
± 5 ppm/°C (typical)
± 0.1 % to ± 1.0 %
± 0.05 % to ± 0.1 %
100 mW (per element)
500 mW
R ± 0.05 %
R ± 0.015 %
0.1 ppm/V
100 V max. not to exceed P x R
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 30 dB
0.08 μV/°C
R ± 0.01 %
R ± 0.002 %
CONDITIONS
- 55 °C to + 125 °C
- 55 °C to + 125 °C
+ 25 °C
+ 25 °C
Maximum at + 70 °C
Maximum at + 70 °C
2000 h at + 70 °C
2000 h at + 70 °C
1 year at + 25 °C
1 year at + 25 °C
Document Number: 60010
36
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
WOMC
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in inches and millimeters
DIMENSION
H E
Index Area
Pin 1 Locator
h x 45°
O
C
A
e
B
L
A1
16
20
INCHES
MILLIMETERS
INCHES
MILLIMETERS
H
0.408
E
0.298
10.36
0.408
10.36
7.57
0.298
7.57
O
0.410
10.41
0.500
12.7
A
0.097
2.46
0.097
2.46
e
0.050
1.27
0.050
1.27
B
0.016
0.406
0.016
0.406
C
0.009
0.228
0.009
0.228
L
0.026
0.66
0.026
0.66
A1
0.007
0.177
0.007
0.177
h
0.015
0.381
0.015
0.381
MECHANICAL SPECIFICATIONS
Resistive Element
Passivated nichrome
Substrate Material
Silicon
Body
Molded epoxy
Terminals
Copper alloy
Lead (Pb)-free Option
100 % matte tin
Tin Lead Option
Sn90
Tin Lead and Lead (Pb)-free Finish
Plated
ORDERING INFORMATION CHECK LIST (Customs)
Special requirements should be identified in advance, but as a minimum, you should have the following information ready.
ELECTRICAL
MECHANICAL
1. Resistors, by value and tolerance
2. Reference resistor(s) and matching of which resistors to which
reference resistors
3. Reference by ratio
4. Absolute temperature coefficient of resistivity
5. Temperature tracking of subordinate resistors to reference
resistor(s)
6. Maximum operating voltage
7. Resistor power ratings
8. Operating temperature range
1. Maximum allowable seated height (from PC board to top of
network)
2. Special marking concerns
3. Schematic pin out of package
4. Specify if lead (Pb)-free
Revision: 20-Oct-11
Document Number: 60010
37
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
WOMC
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: WOMC1xx-xxxT1
W
W
O
M
C
O
M
C
T
GLOBAL MODEL
(4 or 5 digits)
WOMC
(Tin Lead)
1
1
x
x
-
x
x
x
x
x
-
x
x
x
-
CUSTOM PART NUMBER
(7 or 9 digits)
1xx-xxx
or
1xx-xxx-x
WOMCT
(Lead (Pb)-free)
(e3)
x
T
1
T
1
PACKAGING
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel 1000
TS = 100 min., 1 mult
UF = TUBED
Historical Part Number example: 1xx-xxx (for reference purposes only)
1xx-xxx
CUSTOM PART NUMBER
Revision: 20-Oct-11
Document Number: 60010
38
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CSO
www.vishay.com
Vishay Dale Thin Film
Sandwich, 50 mil Pitch, Dual In-Line Thin Film Resistor,
Surface Mount Network
FEATURES
Actual Size
A dual-in-line monolithic ceramic sandwich in a variety
of pin sizes (4 to 20) that allow higher resistance integration
than traditional chip and wire molded construction. In
addition, tighter resistance tolerances can be obtained over
traditional molded networks due to the elimination of
molding temperature and stress.
• Lead (Pb)-free gold plated terminals standard
• Gold-to-gold terminations. External leads are
attached directly to gold pads on the ceramic
Available
substrate by thermo-compression bonding (no
internal solder)
Available
• Tighter tolerances than molded standards
(0.01 %)
• Ceramic package with no cavity
• Flexibility of lead variations to save PC board space
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
TYPICAL PERFORMANCE
TCR
TOL.
ABSOLUTE
TRACKING
25
5
ABSOLUTE
RATIO
0.1
0.02
SCHEMATIC
Custom schematics available
Please consult factory
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
SPECIFICATIONS
Tantalum nitride or passivated nichrome (1)
4 to 20
100  to 1.5 M total
± 25 ppm/°C to ± 50 ppm/°C
± 5 ppm/°C (typical)
± 0.05 % to ± 1.0 %
± 0.02 % to ± 0.1 %
100 mW
500 mW
R ± 0.1 %
R ± 0.03 %
0.1 ppm/V
100 V max. not to exceed P x R
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 30 dB
0.08 μV/°C
R ± 0.01 %
R ± 0.002 %
CONDITIONS
- 55 °C to + 125 °C
- 55 °C to + 125 °C
+ 25 °C
+ 25 °C
Per element at + 70 °C
Maximum at + 70 °C
2000 h at + 70 °C
2000 h at + 70 °C
1 year at + 25 °C
1 year at + 25 °C
Note
(1) Passivated nichrome is not standard film type for CSO series, consult factory if required
Revision: 20-Oct-11
Document Number: 60011
39
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CSO
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in inches and millimeters
DIMENSION
INCHES
MILLIMETERS
A
0.050
1.27
B (Typ.)
0.015
0.38
C
0.017 - 0.005 + 0.0010
0.432
D (Max.)
0.157
3.99
E
0.239
6.07
F (Min.)
0.005
0.13
G (Typ.)
0.006
0.15
L
C
A
B
D
E
H (Max.)
0.070
1.72
L (6 Pins)
0.150 ± 0.01
3.81
L (8 Pins)
0.200 ± 0.01
5.08
L (10 Pins)
0.250 ± 0.01
6.35
L (12 Pins)
0.300 ± 0.01
7.62
L (14 Pins)
0.350 ± 0.01
8.89
L (16 Pins)
0.400 ± 0.01
10.16
L (18 Pins)
0.450 ± 0.01
11.43
L (20 Pins)
0.500 ± 0.01
12.70
F
G
H
MECHANICAL SPECIFICATIONS
Resistive Element
Passivated nichrome or tantalum nitride
Body
Ceramic
Lead Coplanarity
± 0.004
Substrate Material
Alumina
Marking Resistance to Solvents
Terminals
Per MIL-PRF-83401
Copper alloy
Plating
Nickel/gold
Model CSOG - Lead (Pb)-free Standard
Gold plated
Model CSO - Tin/Lead Solder Coated Option
Model CSOT - Lead (Pb)-free Solder Coated Option
Sn63
96.5 % Sn, 3.0 % Ag, 0.5 % Cu
ORDERING INFORMATION CHECK LIST
Special requirements should be identified in advance, but as a minimum, you should have the following information ready.
ELECTRICAL
MECHANICAL
1. Resistors, by value and tolerance
2. Reference resistor(s) and matching of which resistors to which
reference resistors
3. Reference by ratio
4. Absolute temperature coefficient of resistivity
5. Temperature tracking of subordinate resistors to reference
resistor(s)
6. Maximum operating voltage
7. Resistor power ratings
8. Operating temperature range
1. Maximum allowable seated height (from PC board to top of
network)
2. Special marking concerns
3. Schematic pin out of package
4. Specify if solder coated leads are required
Revision: 20-Oct-11
Document Number: 60011
40
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CSO
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CSOG1xx-xxxT1
C
C
S
O
G
1
x
x
-
x
x
x
T
1
C
S
O
1
x
x
-
x
x
x
T
1
S
O
T
x
x
-
x
x
x
-
T
1
GLOBAL MODEL
(3 or 4 digits)
CSOG
(Lead (Pb)-free)
(e4)
1
CUSTOM PART NUMBER
(7 or 9 digits)
1xx-xxx
1xx-xxx-x
CSO
(Tin Lead)
CSOT
(Lead (Pb)-free)
(e1)
x
PACKAGING
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel
TS = 100 min., 1 mult
UF = TUBED
Historical Part Number example: 1xx-xxx (for reference purposes only)
1xx-xxx
CUSTOM PART NUMBER
Revision: 20-Oct-11
Document Number: 60011
41
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CSOM
www.vishay.com
Vishay Dale Thin Film
Sandwich, 25 mil Pitch, Dual In-Line Thin Film Resistor,
Surface Mount Network
FEATURES
• Lead (Pb)-free gold plated terminals standard
• Gold-to-gold terminations. External leads are
Available
attached directly to gold pads on the ceramic
substrate by thermo-compression bonding (no
Available
internal solder)
• Tighter tolerances than molded standards (0.01 %)
• Ceramic package with no cavity
• Flexibility of lead variations to save PC board space
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
A dual-in-line monolithic ceramic sandwich in a variety
of pin sizes (14 to 24) that allow higher resistance integration
than traditional chip and wire molded construction. In
addition, tighter resistance tolerances can be obtained over
traditional molded networks due to the elimination of
molding temperature and stress.
Note
* Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
TYPICAL PERFORMANCE
TCR
TOL.
ABSOLUTE
TRACKING
25
5
ABSOLUTE
RATIO
0.1
0.02
SCHEMATIC
Custom schematics available
Please consult factory
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
SPECIFICATIONS
Tantalum nitride or passivated nichrome (1)
14 to 24
100  to 500 k total
± 25 ppm/°C to ± 50 ppm/°C
± 5 ppm/°C (typical)
± 0.05 % to ± 1.0 %
± 0.02 % to ± 0.1 %
100 mW
500 mW
R ± 0.1 %
R ± 0.03 %
0.1 ppm/V
100 V max. not to exceed P x R
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 30 dB
0.08 μV/°C
R ± 0.01 %
R ± 0.002 %
CONDITIONS
- 55 °C to + 125 °C
- 55 °C to + 125 °C
+ 25 °C
+ 25 °C
Per element at + 70 °C
Maximum at + 70 °C
2000 h at + 70 °C
2000 h at + 70 °C
1 year at + 25 °C
1 year at + 25 °C
Note
(1) Passivated nichrome is not standard film type for CSOM series, consult factory if required
Revision: 05-Sep-12
Document Number: 60121
42
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CSOM
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in inches and millimeters
DIMENSION
INCHES
MILLIMETERS
A
0.025
0.64
L
C
A
B
D
G
H
0.010
0.25
C
0.017 - 0.005 + 0.0010
0.432
D (Max.)
0.157
3.99
E
0.239
6.07
F (Min.)
0.005
0.13
G (Typ.)
0.006
0.15
H (Max.)
0.070
1.72
L (14 Pins)
0.193 ± 0.01
4.90
L (16 Pins)
0.193 ± 0.01
4.90
L (18 Pins)
0.341 ± 0.01
8.66
L (20 Pins)
0.341 ± 0.01
8.66
L (22 Pins)
0.341 ± 0.01
8.66
L (24 Pins)
0.341 ± 0.01
8.66
E
F
B (Typ.)
MECHANICAL SPECIFICATIONS
Resistive Element
Tantalum nitride or passivated nichrome
Body
Ceramic
Lead Coplanarity
± 0.004
Substrate Material
Alumina
Marking Resistance to Solvents
Terminals
Per MIL-PRF-83401
Copper alloy
Plating
Nickel/gold
Model CSOMG - Lead (Pb)-free Standard
Gold plated
Model CSOM - Tin/Lead Solder Coated Option
Model CSOMT - Lead (Pb)-free Solder Coated Option
Sn63
96.5 % Sn, 3.0 % Ag, 0.5 % Cu
ORDERING INFORMATION CHECK LIST
Special requirements should be identified in advance, but as a minimum, you should have the following information ready.
ELECTRICAL
MECHANICAL
1. Resistors, by value and tolerance
2. Reference resistor(s) and matching of which resistors to which
reference resistors
3. Reference by ratio
4. Absolute temperature coefficient of resistivity
5. Temperature tracking of subordinate resistors to reference
resistor(s)
6. Maximum operating voltage
7. Resistor power ratings
8. Operating temperature range
1. Maximum allowable seated height (from PC board to top of
network)
2. Special marking concerns
3. Schematic pin out of package
4. Specify if solder coated leads are required
Revision: 05-Sep-12
Document Number: 60121
43
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CSOM
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CSOMG1xx-xxxT1
C
S
O
M
C
S
O
M
C
S
O
M
GLOBAL MODEL
(4 or 5 digits)
CSOMG
(Lead (Pb)-free)
(e4)
CSOM
(Tin lead)
CSOMT
(Lead (Pb)-free)
(e1)
Revision: 05-Sep-12
G
T
1
1
x
x
-
x
x
x
T
1
1
x
x
-
x
x
x
T
1
x
x
-
x
x
x
-
T
1
CUSTOM PART NUMBER
(7 or 9 digits)
1xx-xxx
1xx-xxx-x
x
PACKAGING
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel
TS = 100 min., 1 mult
UF = TUBED
Document Number: 60121
44
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCC, TLCC
www.vishay.com
Vishay Dale Thin Film
Hermetic, 50 mil Pitch, Leadless Thin Film Chip Resistor,
Surface Mount Network
FEATURES
• High purity alumina substrate for high power
dissipation
• Leach resistant terminations with nickel barrier
Available
• 16, 20, 24 terminal gold plated wraparound
true hermetic packaging
Available
• Military/aerospace
• Hermetically sealed
• Isolated/bussed circuits
• Ideal for military/aerospace applications
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Actual Size
Vishay Dale Thin Film offers a wide resistance range in 16,
20, and 24 terminal hermetic leadless chip carriers. The
standard circuits in the ohmic ranges listed below will utilize
the outstanding wraparound terminations developed for
chip resistors. Should one of the standards not fit your
application, consult the applications engineering group as
we may be able to meet your requirements.
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
TYPICAL PERFORMANCE
ABSOLUTE
25
ABSOLUTE
0.1
TCR
TOL.
Note
• Resistance range: Noted on schematics
TRACKING
5
RATIO
NA
SCHEMATIC
TLCC 16 A01
TLCC 20 A01
TLCC 24 A01
LCC 20A
1 kΩ to 100 kΩ
10 9 8 7
10 kΩ to 200 kΩ
13 12 11 10 9
1 kΩ to 100 kΩ
151413121110
(10 Isolated Resistors)
10 Ω to 250 kΩ
13 12 11 10 9
11
12
13
14
6
5
4
3
14
15
16
17
18
8
7
6
5
4
16
17
18
19
20
21
9
8
7
6
5
4
15 16 1 2
19 20 1 2 3
22 23 24 1 2 3
TLCC 16 A03
TLCC 20 A03
TLCC 24 A03
100 Ω to 100 kΩ
10 9 8 7
10 Ω to 120 kΩ
13 12 11 10 9
1 kΩ to 100 kΩ
1514 13 12 1110
11
6
12
5
13
4
14
3
14
15
16
17
18
8
7
6
5
4
19 20 1 2 3
22 23 24 1 2 3
TLCC 16 A06
TLCC 20 A06
TLCC 24 A06
100 Ω to 100 kΩ
10 9 8 7
1 kΩ to 110 kΩ
13 12 11 10 9
1 kΩ to 100 kΩ
151413121110
15 16 1
2
11
6
12
5
13
4
14
3
15 16
Revision: 20-Oct-11
1
2
14
15
16
17
18
8
7
6
5
4
19 20 1 2 3
16
17
18
19
20
21
8
7
6
5
4
19 20 1 2 3
LCC 20B
9
8
7
6
5
4
16
17
18
19
20
21
14
15
16
17
18
(19 Resistors + 1 Common Point)
10 Ω to 200 kΩ
13 12 11 10 9
14
15
16
17
18
8
7
6
5
4
19 20 1 2 3
9
8
7
6
5
4
22 23 24 1 2 3
Document Number: 60012
45
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCC, TLCC
www.vishay.com
Vishay Dale Thin Film
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
Material
CONDITIONS
Passivated nichrome
-
16, 20, 24
-
Pin/Lead Number
10  to 250 k per resistor
-
TCR: Absolute
± 25 ppm/°C to ± 300 ppm/°C
- 55 °C to + 125 °C
TCR: Tracking
± 5 ppm/°C
- 55 °C to + 125 °C
± 0.1 % to ± 1.0 %
+ 25 °C
N/a
-
Resistance Range
Tolerance: Absolute
Tolerance: Ratio
50 mW max. = common circuits
Power Rating: Resistor
Maximum at + 70 °C
100 mW max. = isolated circuits
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
500 mW
Maximum at + 70 °C
R ± 0.05 %
2000 h at + 70 °C
-
-
< 5 ppm/V (typical)
-
100 V max. not to exceed
-
P x R
Operating Temperature Range
- 55 °C to + 125 °C
-
Storage Temperature Range
- 55 °C to + 150 °C
-
Noise
< - 30 dB
-
Thermal EMF
0.008 μV/°C
-
Shelf Life Stability: Absolute
R ± 0.01 %
1 year at + 25 °C
-
-
Shelf Life Stability: Ratio
Note
• Tantalum nitride film is custom, consult factory
DIMENSIONS in inches and millimeters
D
max.
B
G
typ.
0.008"
(0.203)
R Typ.
Terminal 1
C
Terminal 1
Indicator
F
A
typ.
DIMENSION
H
E
Typ.
16 PINS
Index
Corner
20 PINS
24 PINS
INCHES
MILLIMETERS
INCHES
MILLIMETERS
INCHES
MILLIMETERS
A
0.050
1.27
0.050
1.27
0.050
1.27
B
0.300
7.26
0.350
8.89
0.400
10.16
C
0.300
7.26
0.350
8.89
0.400
10.16
D
0.077
1.96
0.077
1.96
0.077
1.96
E
0.025
0.635
0.025
0.635
0.025
0.635
1.27
F
0.050
1.27
0.050
1.27
0.050
G
0.040
1.02
0.040
1.02
0.040
1.02
H
0.020
0.508
0.020
0.508
0.020
0.508
Revision: 20-Oct-11
Document Number: 60012
46
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCC, TLCC
www.vishay.com
Vishay Dale Thin Film
MECHANICAL SPECIFICATIONS
Resistive Element
Passivated nichrome
Substrate Material
Alumina
Body
Ceramic
Terminals
Gold over nickel
Marking Resistance to Solvents
Per MIL-PRF-83401
Tin Lead Option
Sn63
Lead (Pb)-free Option
96.5 % Sn, 3.0 % Ag, 0.5 % Cu
Tin Lead and Lead (Pb)-free
Hot solder dip
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: TLCC20AE1002BUF
T
T
L
C
C
2
0
L
C
C
T
1
6
GLOBAL
MODEL
(4 or 5 digits)
A
A
0
TERMINAL
COUNT (1)
SCHEMATICS
(4 or 5 digits)
TCR
CHARACTERISTICS
LCC
(Tin lead)
20
LCCT
(Lead
(Pb)-free)
(e1)
20
A = Isolated
resistors
B = Resistor to
common bus
E = 25 ppm/°C
H = 50 ppm/°C
K = 100 ppm/°C
M = 300 ppm/°C
TLCC
(Tin lead)
16
20
24
TLCCT
(Lead
(Pb)-free)
(e1)
16
20
24
1
E
1
0
0
2
B
U
F
K
1
0
0
3
K
U
F
RESISTANCE
TOLERANCE
PACKAGING
First 3 digits are
significant figures
and the last digit
specifies the
number of zeros to
follow.
B = 0.1 %
D = 0.5 %
F=1%
G=2%
J=5%
K = 10 %
S = Special
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel 2000
TS = 100 min., 1 mult
Example:
10R0 = 10 
12R5 = 12.5 
1000 = 100 
1001 = 1000 
A01 = Resistor to
common
bus
A03 = Isolated
parallel
resistor
A06 = Isolated
adjacent
resistor
UF = TUBED
Historical Part Number example: LC20BK1003J (for reference purposes only)
LC
20
B
K
1003
J
SERIES
PINS
SCHEMATIC
TCR
CHARACTERISTIC
RESISTANCE
TOLERANCE
Note
(1) LCC or LCCT only available in 20 pin size
Revision: 20-Oct-11
Document Number: 60012
47
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MPH
www.vishay.com
Vishay Dale Thin Film
Hermetic, 50 mil Pitch, Leadless Thin Film Chip Resistor,
Surface Mount Network
FEATURES
• True hermetic construction
• Exceptional stability and performance
characteristics ratio stability (R ± 0.015 % at
70 °C for 2000 h)
Available
Available
• Nickel barrier terminations
• Military/aerospace
• Hermetically sealed
Actual Size
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Vishay Dale Thin film offers a four terminal hermetic leadless
chip carrier package with precision matched pair elements.
The network features tight ratio tolerance and close tracking
over a 100  to 100 k resistance range. For custom
schematics and values contact applications engineering.
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
TYPICAL PERFORMANCE
TCR
TOL.
ABSOLUTE
TRACKING
25
5
ABSOLUTE
RATIO
0.1
0.05
SCHEMATIC
4
2
R
2
R
2
1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
SPECIFICATIONS
CONDITIONS
Passivated nichrome
-
Pin/Lead Number
4
-
Resistance Range
100  to 100 k
-
TCR: Absolute
± 25 ppm/°C (standard)
- 55 °C to + 125 °C
TCR: Tracking
± 2 ppm/°C (typical < 1 ppm /°C equal values)
- 55 °C to + 125 °C
Tolerance: Absolute
± 0.1 % to ± 1.0 %
+ 25 °C
Tolerance: Ratio
± 0.05 % to ± 0.1 %
+ 25 °C
250 mW (per element)
Maximum at + 70 °C
Power Rating: Resistor
Power Rating: Package
1000 mW
Maximum at + 70 °C
Stability: Absolute
R ± 0.05 %
2000 h at + 70 °C
Stability: Ratio
R ± 0.015 %
2000 h at + 70 °C
Voltage Coefficient
Working Voltage
< 0.1 ppm/V
100 V max. not to exceed
P x R
-
Operating Temperature Range
- 55 °C to + 125 °C
Storage Temperature Range
- 55 °C to + 150 °C
-
< - 30 dB
-
Noise
Thermal EMF
-
0.08 μV/°C
-
Shelf Life Stability: Absolute
R ± 0.01 %
1 year at + 25 °C
Shelf Life Stability: Ratio
R ± 0.002 %
1 year at + 25 °C
Revision: 20-Oct-11
Document Number: 60013
48
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MPH
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches and millimeters
C
DIMENSION
INCHES
MILLIMETERS
A
0.155
3.937
B
0.080
2.032
C
0.225
5.715
D
0.025 (typical)
0.635
E
0.040
1.016
F
0.070
1.778
G
0.050
1.27
B
2
1
D
G
A
3
4
E
F
BOTTOM VIEW
MECHANICAL SPECIFICATIONS
Resistive Element
Passivated nichrome
Substrate Material
Alumina
Body
Ceramic
Terminals
Gold over nickel
Marking Resistance to Solvents
Per MIL-PRF-83401
Tin Lead Option
Sn63
Lead (Pb)-free Option
96.5 % Sn, 3.0 % Ag, 0.5 % Cu
Tin Lead and Lead (Pb)-free
Hot solder dip
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: MPHK1003BUF
M
M
P
H
K
1
0
0
3
B
U
F
P
H
T
K
1
0
0
3
A
U
F
GLOBAL MODEL
(3 or 4 digits)
TCR
CHARACTERISTIC
MPH
(Tin lead)
E = 25 ppm/°C
H = 50 ppm/°C
K = 100 ppm/°C
MPHT
(Lead (Pb)-free)
(e1)
RESISTANCE
First 3 digits are significant
figures and the last digit
specifies the number of
zeros to follow.
Example:
1001 = 1K
1002 = 10K
TOLERANCE AND
RATIO TOLERANCE
Abs. Tol.
Ratio
A = 0.1 %
B = 0.1 %
C = 0.25 %
D = 0.5 %
F=1%
0.05 %
0.1 %
0.1 %
0.1 %
0.5 %
PACKAGING
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel 2500
TS = 100 min., 1 mult
UF = TUBED
Historical Part Number example: MPHE1001B (for reference purposes only)
MPH
E
1001
B
SERIES
TCR
CHARACTERISTIC
RESISTANCE
TOLERANCE AND
RATIO TOLERANCE
Revision: 20-Oct-11
Document Number: 60013
49
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PR100, PR135, PR182
www.vishay.com
Vishay Dale Thin Film
High Precision Thin Film Network,
Surface Mount Leadless Resistor Arrays
FEATURES
• Gold terminations over nickel barrier
• High stability passivated nichrome resistive layer
• Tight TCR (10 ppm/°C) and TCR tracking
(to 2 ppm/°C)
• Very low noise and voltage coefficient < - 30 dB,
0.1 ppm/V typical
Product may not
be to scale
• Ratio tolerance to 0.02 %
PR arrays can be used in most applications requiring a
matched pair (or set) of resistor elements. The networks
provide 2 ppm/°C TCR tracking, a ratio tolerance as tight as
0.02 % and outstanding stability. They are available in
1 mm, 1.35 mm and 1.82 mm pitch.
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
SCHEMATIC
Schematic A: Independent Resistors
Electrical Diagram
R1
R2
R7
R8
Number of Resistors: 2 to 8
R1 = R2 = .... R8
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
Revision: 29-Aug-13
SPECIFICATIONS
Passivated nichrome
100  to 200 k (PR100)
100  to 300 k (PR135)
100  to 1 M (PR182)
± 10 ppm/°C
± 2 ppm/°C
± 0.1 % to ± 10 %
± 0.02 % to ± 0.1 %
100 mW (PR100)
125 mW (PR135)
200 mW (PR182)
 0.1 ppm/V
35 V (PR100)
75 V (PR135)
100 V (PR182)
- 55 °C to + 125 °C
- 55 °C to + 150 °C
 - 30 dB
-
CONDITIONS
- 55 °C to + 125 °C
- 55 °C to + 125 °C
At + 70 °C
-
Document Number: 53039
50
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PR100, PR135, PR182
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in mils
E
DIMENSION
PR100
PR135
PR182
A
64 ± 6
72 ± 6
118 ± 6
B
17
20.3
23.6
C
30
43.3
61.8
D
10
10
10
A
B
E (1)
C
D
G
F
E = (N x F) ± 8 E = (N x F) ± 8 E = (N x F) ± 8
F
40
53.3
71.8
G
15
15
15
Notes
• ± 2 mils unless specified
(1) Where “N” = Number of resistors
MECHANICAL SPECIFICATIONS
Substrate
Alumina 99.6 %
Technology
Thin Film
Film
Passivated nichrome
Terminations
Solderable gold (Au) over nickel
Precent of Rated Power
DERATING CURVE
100
80
60
40
20
0
0
70
155
Ambient Temperature °C
PACKAGING
Waffle-pack or tape and reel
MARKING
On the primary package, printed information includes Vishay trademark series and model, schematic number of resistors, ohmic
value, absolute tolerance, ratio tolerance, type of termination
Revision: 29-Aug-13
Document Number: 53039
51
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PR100, PR135, PR182
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: PR100A41002BBGTS
P
GLOBAL
MODEL
PR100
PR135
PR182
R
1
0
SCHEMATICS
0
A
NUMBER
OF
RESISTORS
A = Isolated
resistors
2
3
4
5
6
7
8
4
1
RESISTANCE
First 3 digits are
significant figures
and the last digit
specifies
the
number of zeros
to follow.
0
0
ABSOLUTE
TOLERANCE
2
B
RATIO
TOLERANCE
B
G
TERMINATION
Q = 0.01 % (1) G = Wraparound
Au over Ni
P = 0.02 % (2)
termination e4
W = 0.05 % (3)
lead (Pb)-free
B = 0.1 %
RoHS compliant
C = 0.25 %
D = 0.5 %
F=1%
B = 0.1 %
C = 0.25 %
D = 0.5 %
F=1%
G=2%
J=5%
K = 10 %
T
Example:
10R0 = 10 
12R5 = 12.5 
1000 = 100 
1001 = 1000 
S
PACKAGING
TAPE AND REEL (4)
T0 = 100 min.,
100 mult
T1 = 1000 min.,
1000 mult
T3 = 300 min.,
300 mult
T5 = 500 min.,
500 mult
TF = Full reel
TS = 100 min.,
1 mult
TI = 100 min.,
1 mult (5)
TP = 100 min.,
1 mult (6)
WAFFLE
WS = 100 min.,
1 mult
WS = 100 min.,
1 mult (5)
WS = 100 min.,
1 mult (6)
Historical Part Number example: PR100A41002BBGT (for reference purposes only)
PR100
A
4
1002
B
B
G
T
SERIES
SCHEMATIC
NUMBER
RESISTANCE
ABSOLUTE
TOLERANCE
RATIO
TOLERANCE
TERMINATION
PACKAGING
Notes
(1) 10 k, up to 4 resistors
(2) > 1 k, max. 4 resistors
(3) > 100 , up to 8 resistors
(4) Please refer to below table for tape and reel availability
(5) Item single lot date code
(6) Package unit single lot date code
TAPE AND REEL AVAILABILITY
NUMBER OF RESISTORS
PR100
PR135
PR182
2
Available
Available
Available
3
••
Available
••
4
Available
Available
Available
5
••
Available
Available
6
Available
Available
••
7
••
Available
••
8
Available
••
••
Note
•• Not available, consult factory
Revision: 29-Aug-13
Document Number: 53039
52
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FP200, FP201, FP202
www.vishay.com
Vishay Dale Thin Film
Hermetic Flat Pack Thin Film Resistor, Surface Mount Network
FEATURES
Product may not
be to scale
•
•
•
•
Military/aerospace
Hermetically sealed
Compliant to RoHS Directive 2002/95/EC
Halogen-free according to IEC 61249-2-21
definition
Available
Available
Note
* Pb containing terminations are not RoHS compliant, exemptions
may apply
Vishay Dale Thin Film offers a broad line of precision resistor
networks in hermetic Flat-Packs for surface mount
requirements in military, space or other harsh environmental
applications. These networks provide the long-term stability
necessary to insure continuous specification and
performance over the 20 years to 30 years life required for
space applications. The fabrication of these devices is
performed under tight procedural and environmental
controls to insure conformance to all 883C level H or K
requirements. Custom configurations, values and tolerance
combinations are available with fast turnaround.
SCHEMATICS
FP200
Number of Resistors
Number of Leads
Type Connection
Values Available
7, 8
14, 16
Isolated
500  to 100 k
1
FP201
Number of Resistors
Number of Leads
Type Connection
Values Available
12, 14
14, 16
Series
500  to 100 k
1
FP202
Number of Resistors
Number of Leads
Type Connection
Values Available
13, 15
14, 16
Common
500  to 100 k
1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
Revision: 20-Oct-11
SPECIFICATIONS
Passivated nichrome
14, 16
10  to 1 M (total)
± 10 ppm/°C to 50 ppm/°C
± 5 ppm/°C (standard)
± 0.05 % to ± 1 %
± 0.01 % to ± 0.1 %
100 mW
800 mW
R ± 0.05 %
R ± 0.015 %
100 V max. not to exceed P x R
- 55 °C to + 125 °C
- 55 °C to + 150 °C
R ± 0.01 %
R ± 0.002 %
CONDITIONS
70 °C
2000 h at + 70 °C
2000 h at + 70 °C
1 year at + 25 °C
1 year at + 25 °C
Document Number: 61073
53
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FP200, FP201, FP202
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches (millimeters)
D
A
C
E
E1
A
e
b
Q
S1
k
S
14 LEAD
DIMENSION
FLAT-PAK FP200
16 LEAD
MINIMUM
MAXIMUM
MINIMUM
MAXIMUM
0.086 (2.18)
0.106 (2.69)
0.045 (1.14)
0.115 (2.92)
b
0.015 (0.38)
0.019 (0.48)
0.015 (0.38)
0.019 (0.48)
C
0.004 (0.10)
0.007 (0.18)
0.003 (0.08)
0.009 (0.23)
D
0.373 (9.47)
0.383 (9.73)
-
0.440 (11.18)
e
0.047 (1.19)
0.053 (1.35)
0.050 (1.27)
BSC
E
0.250 (6.35)
0.260 (6.60)
0.245 (6.22)
0.285 (7.24)
E1
-
0.290 (7.37)
-
0.315 (8.00)
E2
0.158 (4.01)
0.172 (4.37)
0.130 (3.30)
-
E3
0.030 (0.76)
-
0.030 (0.76)
0.370 (9.40)
L
-
-
0.250 (6.35)
Q
0.026 (0.66)
-
0.26 (0.66)
0.045 (1.14)
S
-
0.045 (1.14)
-
0.045 (1.14)
S1
0.005 (0.13)
-
0.005 (0.13)
-
k
-
-
0.008 (0.20)
0.015 (0.38)
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: FP2001681001BFBCW
F
P
2
0
0
1
6
F
P
2
0
2
1
6
GLOBAL
MODEL
CASE
SIZE
NUMBER OF
RESISTORS
(1 or 2 digits)
FP200
14
16
7
8
FP201
14
16
12
14
FP202
14
16
13
16
8
1
3
1
0
0
1
B
F
B
C
W
1
0
0
1
B
F
B
C
W
OHMIC
VALUE
ABSOLUTE
TOLERANCE
RATIO
TOLERANCE
ABSOLUTE
TCR
RATIO
TCR
The first 3 digits
are significant
figures and the
last
digit
specifies
the
number of zeros
to follow. “R”
designates the
decimal point.
Example:
10R0 = 10 
1000 = 100 
1001 = 1000 
A = 0.05 %
B = 0.1 %
C = 0.2 %
D = 0.5 %
F=1%
G=2%
J=5%
K = 10 %
M = 20 %
B = 0.01 %
C = 0.025 %
D = 0.05 %
F = 0.1 %
H = 0.25 %
J = 0.5 %
K=1%
X = Not
applicable
A = 10 ppm/°C
B = 25 ppm/°C
D = 50 ppm/°C
E = 100 ppm/°C
C = 2 ppm (1)
D = 3 ppm (1)
F = 5 ppm
G = 10 ppm
X = N/A
PACKAGING
W = WAFFLE
100 min.,
1 mult
Historical Part Number example: FP2001681002BFBC (for reference purposes only)
FP200
16
8
1002
B
F
B
C
MODEL
NUMBER
OF LEADS
NUMBER OF
RESISTORS
RESISTANCE
ABSOLUTE
TOLERANCE
RATIO
TOLERANCE
ABSOLUTE
TCR
RATIO
TCR
Note
(1) Value dependent
Revision: 20-Oct-11
Document Number: 61073
54
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DFN
www.vishay.com
Vishay Dale Thin Film
Dual Flat No Lead Molded Precision Thin Film Resistor
Surface Mount Network
FEATURES
•
•
•
•
•
•
•
•
•
The DFN series of precision surface mount resistor networks
feature isolated thin film precision resistors mounted in a
0.8 mm pitch 4 mm x 4 mm dual flat no lead package. The
networks feature 50 % savings in board space over
traditional SOIC packages. They are ideally suited for
applications of unity gain operational amplifiers that require
close TC tracking and tight ratio tolerances over
temperature. Custom configurations are available upon
request.
0.8 mm lead pitch
MSL level 1 per J-STD-020
Low profile 1 mm seated height
Small size 4 mm x 4 mm size 50 % board savings
over SOIC packages
Wide resistance range 100  to 100 k available
Custom configurations available
Low TCR ± 25 ppm, TCR tracking to ± 3 ppm
Ratio tolerances to ± 0.025 %
Compliant to RoHS Directive 2002/95/EC
TYPICAL PERFORMANCE
TCR
TOL.
ABSOLUTE
TRACKING
25
3
ABSOLUTE
RATIO
0.1
0.05
STANDARD RESISTANCE OFFERING (R1 =)
SCHEMATIC
8
R1
7
R1
6
R1
5
R1
500 
10 k
1 k
20 k
2 k
50 k
4.99 k
100 k
5 k
1
2
3
Note
• Consult factory for additional R values and schematics
4
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
CONDITIONS
Passivated nichrome
-
Pin/Lead Number
8
-
Resistance Range
100  to 100 k per resistor
-
± 25 ppm/°C
± 3 ppm/°C
± 0.05 % to ± 1.0 %
± 0.025 % to ± 0.5 %
100 mW
100 mW x number of resistors
R ± 0.05 %
R ± 0.015 %
< 0.1 ppm/V
100 V max. not to exceed P x R
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 30 dB
< 0.08 μV/°C
R ± 0.01 %
R ± 0.002 %
- 55 °C to + 125 °C
- 55 °C to + 125 °C
+ 25 °C
+ 25 °C
Maximum at + 70 °C
Maximum at + 70 °C
2000 h at + 70 °C
2000 h at + 70 °C
1 year at + 25 °C
1 year at + 25 °C
Material
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
Revision: 02-Sep-11
Document Number: 60109
55
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DFN
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in millimeters
3.500 ± 0.050
Exposed Pad
4.000 ± 0.050
8
5
5
6
7
8
DFNA
XXXX
MMYY
4.000 ± 0.050
1
Pin 1 Dot
by Marking
0.800 BSC
0.300 ± 0.050
Resistance
Value Code
2.700 ± 0.050
Exposed Pad
4
Date
Code
(MMYY)
4
(4 mm x 4 mm)
TOP VIEW
3
2
1
Pin 1 Indentification
Chamfer 0.300 x 45°
2.400
Ref.
0.400 ± 0.050
BOTTOM VIEW
A
A
Max.
Nom.
Min.
0.900
0.850
0.800
0.000 - 0.050
SIDE VIEW
0.203 Ref.
Note
• Contact factory for package outlines for higher pin count or custom configurations
MECHANICAL SPECIFICATIONS
Resistive Element
Passivated nichrome
Substrate Material
Silicon
Body
Molded epoxy
Terminals
Copper alloy
Plating
100 % matte tin
Marking Resistance to Solvents
Per MIL-PRF-914
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: DFNA1002AT1
D
GLOBAL
MODEL
DFN
(Lead (Pb)-free)
(e3)
F
N
A
1
SCHEMATIC
RESISTANCE
A = Isolated equal
value resistors
The first 3 digits are
significant figures and
the last digit specifies
the number of zeros
to follow.
Example:
1002 = 10 k
1003 = 100 k
4991 = 4.99 k
0
0
2
A
T
TOLERANCE AND
RATIO TOLERANCE
Z = ± 0.05 % abs. ± 0.025 ratio (1)
A = ± 0.1 % abs. ± 0.05 % ratio
B = ± 0.1 % abs. ± 0.1 % ratio
C = ± 0.25 % abs. ± 0.1 % ratio
D = ± 0.5 % abs. ± 0.1 % ratio
F = ± 1.0 % abs. ± 0.5 % ratio
1
PACKAGING
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult (2)
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel
TS = 100 min., 1 mult
UF = TUBED
Notes
(1) Tolerance available on 1 k and up
(2) Preferred packaging code
Revision: 02-Sep-11
Document Number: 60109
56
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DFN (Divider)
www.vishay.com
Vishay Dale Thin Film
Dual Flat No Lead Molded Precision Thin Film Divider,
Surface Mount Resistor Network
FEATURES
• 0.8 mm lead pitch
• MSL level 1 per J-STD-020
• Low profile 1 mm seated height
• Small size 4 mm x 4 mm size 50 % board
savings over SOIC packages
• Low TCR ± 25 ppm, TCR tracking to ± 5 ppm
• Compliant to RoHS Directive 2002/95/EC
The DFN series of thin film precision dividers surface mount
resistor networks offer a wide ratio range that is listed in the
standard resistance offering table. The 4 mm x 4 mm
0.8 mm pitch dual flat no lead package feature 50 % savings
in board space over traditional SOIC packages. The DFN
dividers are ideal for applications that require tight TC
tracking and ratio tolerances over temperature.
TYPICAL PERFORMANCE
TCR
TOL.
ABSOLUTE
TRACKING
25
5
ABSOLUTE
RATIO
0.1
0.05
SCHEMATIC
8
R1
7
R2
1
6
R2
2
STANDARD RESISTANCE OFFERING (R1/R2)
5
R1
3
4
RATIO
R1
R2
100:1
100K
1K
50:1
50K
1K
25:1
25K
1K
20:1
20K
1K
10:1
10K
1K
5:1
10K
2K
2:1
10K
5K
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
CONDITIONS
Passivated nichrome
-
Pin/Lead Number
8
-
Resistance Range
1000  to 100 k per element
-
TCR: Absolute
± 25 ppm/°C
- 55 °C to + 125 °C
TCR: Tracking
± 5 ppm/°C
- 55 °C to + 125 °C
Material
Tolerance: Absolute
± 0.1 %
+ 25 °C
Tolerance: Ratio
± 0.05 %
+ 25 °C
Power Rating: Resistor
100 mW
Maximum at + 70 °C
Power Rating: Package
100 mW x number of resistors
Maximum at + 70 °C
Stability: Absolute
R ± 0.05 %
2000 h at + 70 °C
Stability: Ratio
R ± 0.015 %
2000 h at + 70 °C
Voltage Coefficient
Working Voltage
< 0.1 ppm/V
100 V max. not to exceed
P x R
-
Operating Temperature Range
- 55 °C to + 125 °C
-
Storage Temperature Range
- 55 °C to + 150 °C
-
< - 30 dB
-
Noise
Thermal EMF
< 0.08 μV/°C
-
Shelf Life Stability: Absolute
R ± 0.01 %
1 year at + 25 °C
Shelf Life Stability: Ratio
R ± 0.002 %
1 year at + 25 °C
Revision: 01-Sep-11
Document Number: 60110
57
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DFN (Divider)
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in millimeters
3.500 ± 0.050
Exposed Pad
4.000 ± 0.050
8
0.800 BSC
0.300 ± 0.050
(1) Part Number
to be 4 Characters
5
6
7
8
DFNA
xxxx
MMYY
4.000 ± 0.050
Pin 1 Dot
by Marking
5
2.700 ± 0.050
Exposed Pad
1
4
(4 mm x 4 mm)
TOP VIEW
4
Date
Code
(MMYY)
0.400 ± 0.050
3
2
1
Pin 1 Indentification
Chamfer 0.300 x 45°
2.400
Ref.
BOTTOM VIEW
A
A
Max.
Nom.
Min.
0.900
0.850
0.800
0.000 - 0.050
SIDE VIEW
0.203 Ref.
Notes
(1) 100-1 resistance ratio part marking to be 100(2) Contact factory for package outlines for higher pin count or custom configurations
MECHANICAL SPECIFICATIONS
Resistive Element
Passivated nichrome
Substrate Material
Silicon
Body
Molded epoxy
Terminals
Copper alloy
Plating
100 % matte tin
Marking Resistance to Solvents
Per MIL-PRF-914
GLOBAL PART NUMBER INFORMATION
D
F
N
A
5
-
1
U
F
GLOBAL MODEL
(4 digits)
RESISTANCE
(3, 4 or 5 digits)
PACKAGING
DFNA
(Lead (Pb)-free)
(e3)
2-1
5-1
10-1
20-1
25-1
50-1
100-1
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult (3)
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel 3000
TS = 100 min., 1 mult
UF = TUBED
Note
Preferred packaging code
(3)
Revision: 01-Sep-11
Document Number: 60110
58
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
QFNwww.vishay.com
Vishay Dale Thin Film
Quad Flat No Lead Molded Precision Thin Film Resistor,
Surface Mount Network
FEATURES
• 0.65 mm lead pitch
• MSL level 1 per J-STD-020
• Low profile 1 mm seated height
• Small size 5 mm x 5 mm
• Low TCR ± 25 ppm, TCR tracking to ± 5 ppm
• Compliant to RoHS Directive 2002/95/EC
TYPICAL PERFORMANCE
The QFN- series features a standard 20 pins quad flat no
lead 5 mm x 5 mm 0.65 mm pitch package. The quad flat no
lead package saves board space over traditional SOIC
packages. Additional pin counts available, consult factory.
TCR
TOL.
ABSOLUTE
TRACKING
25
5
ABSOLUTE
RATIO
0.1
0.05
SCHEMATIC
Custom schematics available
Please consult factory
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
SPECIFICATIONS
CONDITIONS
Passivated nichrome
-
Pin/Lead Number
20
-
Resistance Range
100  (resistor) to 500 k (total)
-
TCR: Absolute
± 25 ppm/°C to ± 100 ppm/°C
- 55 °C to + 125 °C
TCR: Tracking
± 5 ppm/°C (typical)
- 55 °C to + 125 °C
Tolerance: Absolute
± 0.1 % to ± 1.0 %
+ 25 °C
Tolerance: Ratio
± 0.05 % to ± 0.1 %
+ 25 °C
100 mW (per element)
Maximum at + 70 °C
Power Rating: Resistor
Power Rating: Package
500 mW
Maximum at + 70 °C
Stability: Absolute
R ± 0.05 %
2000 h at + 70 °C
Stability: Ratio
R ± 0.015 %
2000 h at + 70 °C
Voltage Coefficient
Working Voltage
0.1 ppm/V
100 V max. not to exceed
P x R
-
Operating Temperature Range
- 55 °C to + 125 °C
-
Storage Temperature Range
- 55 °C to + 150 °C
-
< - 30 dB
-
Noise
Thermal EMF
0.08 μV/°C
-
Shelf Life Stability: Absolute
R ± 0.01 %
1 year at + 25 °C
Shelf Life Stability: Ratio
R ± 0.002 %
1 year at + 25 °C
Revision: 02-Sep-11
59
Document Number: 60015
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
QFNwww.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in millimeters
Pin 1 Dot
by Marking
Pin 1 Identification
Chamfer 0.500 x 45°
3.150 ± 0.050
Exp. DAP
5.000 ± 0.050
0.550 ± 0.050
16 17 18 19 20
15
1
14
2
13
3
12
4
0.650 BSC
5.000 ± 0.050
XXX-XXX
MMYY
0.300 ± 0.050
11
5
10
9
8
7
6
2.600
Ref.
BOTTOM VIEW
TOP VIEW
A
3.150 ± 0.050
Exp. DAP
Max.
Nom.
Min.
0.900
0.850
0.800
A
0.000 - 0.050
0.203 Ref.
SIDE VIEW
Note
• Contact factory for package outlines for higher pin count or custom configurations
MECHANICAL SPECIFICATIONS
Resistive Element
Passivated nichrome
Substrate Material
Silicon
Body
Molded epoxy
Terminals
Copper alloy
Plating
100 % matte tin
Marking Resistance to Solvents
Per MIL-PRF-914
ORDERING INFORMATION CHECK LIST (Customs)
Special requirements should be identified in advance, but as a minimum, you should have the following information ready.
ELECTRICAL
MECHANICAL
1. Resistors, by value and tolerance
2. Reference resistor(s) and matching of which resistors to which
reference resistors
3. Reference by ratio
4. Absolute temperature coefficient of resistivity
5. Temperature tracking of subordinate resistors to reference
resistor(s)
6. Maximum operating voltage
7. Resistor power ratings
8. Operating temperature range
1. Maximum allowable seated height (from PC board to top of
network)
2. Special marking concerns
3. Schematic pin out of package
Revision: 02-Sep-11
60
Document Number: 60015
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
QFNwww.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
Q
F
N
-
1
x
x
-
GLOBAL MODEL
(4 digits)
CUSTOM PART NUMBER
(7 or 9 digits)
QFN(Lead (Pb)-free)
(e3)
1xx-xxx
or
1xx-xxx-x
x
x
x
T
1
PACKAGING
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel
TS = 100 min., 1 mult
UF = TUBED
Revision: 02-Sep-11
61
Document Number: 60015
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HTRN
www.vishay.com
Vishay Dale Thin Film
Molded, 50 mil Pitch, High Temperature (215 °C);
Thin Film Surface Mount, Dual-In-Line Resistor Network
FEATURES
•
•
•
•
•
•
•
•
•
•
HTRN series resistor networks feature four isolated resistors
with standard 50 mil pitch lead spacing. HTRN is ideal to be
used in oil/gas exploration industry, automotive under the
hood applications, and aerospace engine control high
temperature applications. The networks feature close TCR
tracking and tight ratio tolerance and are ideally suited for
unity gain operational amplifier circuitry. The standard
resistance offering listed are available for immediate
delivery.
R1
7
R2
1
6
R2
2
5
R1
3
TYPICAL PERFORMANCE
TCR
TOL.
ABSOLUTE
TRACKING
25
5
ABSOLUTE
RATIO
0.1
0.05
STANDARD RESISTANCE OFFERING (R1/R2)
RATIO
R1
R2
100:1
100K
1K
50:1
50K
1K
25:1
25K
1K
20:1
20K
1K
10:1
10K
1K
5:1
10K
2K
2:1
10K
5K
4:1
4K
1K
Note
• Consult factory for additional values and schematics
SCHEMATIC
8
Ratio tolerance to ± 0.05 %
Ratio stability ± 0.1 %
Available
- 55 °C to 215 °C operating temperature range
0.068" (1.73 mm) maximum seated height
Rugged molded case construction with no
internal solder
Low temperature coefficient (± 25 ppm/°C)
JEDEC MS-012 STD variation AA package
Gold terminations for durable attach bonds
Compliant to RoHS Directive 2002/95/EC
Halogen-free according to IEC 61249-2-21 definition
4
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
Revision: 12-Dec-11
SPECIFICATIONS
Passivated nichrome
8
1000  to 100 k per resistor
± 25 ppm/°C
± 5 ppm/°C
0.1 %
0.05 %
100 mW
400 mW
R ± 0.5 %
R ± 0.1 %
0.1 ppm/V (typical)
100 V max. not to exceed P x R
- 55 °C to + 215 °C
- 55 °C to + 215 °C
< - 30 dB
0.08 μV/°C
R ± 0.01 %
R ± 0.002 %
CONDITIONS
- 55 °C to + 125 °C
- 55 °C to + 125 °C
+ 25 °C
+ 25 °C
Maximum at + 70 °C
Maximum at + 70 °C
2000 h at + 215 °C at 25 % rated power
2000 h at + 215 °C at 25 % rated power
1 year at + 25 °C
1 year at + 25 °C
Document Number: 60111
62
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HTRN
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in inches and millimeters
Resistance
Value Code
C
F
HTRN
A
DIMENSION
E
B
xxxx
G
Date
Code
H
I
MILLIMETERS
A
0.157
3.99
B
0.0165 ± 0.0025
0.4 ± 0.06
C
0.050
1.27
D
0.195 max.
4.93
E
0.008 ± 0.001
0.20 ± 0.03
F
0.028 ± 0.001
0.71 ± 0.02
G
0.239 ± 0.005
6.07 ± 0.13
H
0.068 max.
1.73
I
0.008 ± 0.002
0.22 ± 0.06
Ø
2° to 6°
2° to 6°
ø
D
INCHES
Seating
Plane
Note
• Marking - Vishay symbol, part number from ordering information
MECHANICAL SPECIFICATIONS
DERATING CURVE
Passivated nichrome
Substrate Material
Silicon
Body
100
Percent of Rated Power
Resistive Element
Molded epoxy
Terminals
Copper
100 % = 0.40 W
75
50
25
0
Termination Finish
0
Plated Ni/Pd/Au
70
215
Ambient Temperature °C
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: HTRN5-1UF
H
T
R
N
5
GLOBAL MODEL
(4 digits)
RESISTANCE
(3, 4 or 5 digits)
HTRN
2-1
4-1
5-1
10-1
20-1
25-1
50-1
100-1
-
1
U
F
PACKAGING
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel 3000
TS = 100 min., 1 mult
UF = TUBED
Revision: 12-Dec-11
Document Number: 60111
63
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Contents
Surface
Mount
Chips
E/H (Military M/D55342)........
65
E/H (T-Level)
(Military M/D55342)...............
68
E/H (Ta2N)
(Military M/D55342)...............
71
D.S.C.C. Specifications.........
74
P-NS......................................
75
PTN .......................................
77
L-NS ......................................
80
M ...........................................
83
FC .........................................
86
PNM ......................................
90
PLT........................................
93
PLTT .....................................
95
PAT .......................................
98
PATT ..................................... 101
PHP....................................... 104
Tape and Reel Specifications 107
Waffle Pack Packaging ......... 109
E/H (Military M/D55342)
www.vishay.com
Vishay Dale Thin Film
QPL MIL-PRF-55342 Qualified
Thin Film Resistor, Surface Mount Chip
FEATURES
Thin Film Mil chip resistors feature all sputtered wraparound
termination for excellent adhesion and dimensional
uniformity. They are ideal in applications requiring stringent
performance requirements. Established reliability is assured
through 100 % screening and extensive environmental lot
testing.
CONSTRUCTION
Passivation
Resistor Film
• Established reliability, “S” failure rate level (10 ppm), C = 2
• High purity alumina substrate 99.6 % purity
• Wraparound termination featuring a tenacious adhesion
layer covered with an electroplated nickel barrier layer for
+ 150 °C operating conditions
• Very low noise and voltage coefficient
(< - 25 dB, 0.5 ppm/V)
• Non-inductive
• Laser-trimmed tolerances ± 0.1 %
• Wraparound resistance less than 0.010  typical
• In-lot tracking less than 5 ppm/°C
• Complete MIL-testing available in-house
• Antistatic waffle pack or tape and reel packaging available
• Military/aerospace/QPL
TYPICAL PERFORMANCE
Solder
Coating
Nickel Barrier
High Purity
Alumina Substrate
Adhesion Layer
ABSOLUTE
TCR
25
TOL.
0.1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Resistance Range
TCR: Absolute
Tolerance: Absolute
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Shelf Life Stability: Absolute
SPECIFICATIONS
Tamelox resistor film (passivated nichrome)
10  to 6.19 M
± 25 ppm/°C to ± 300 ppm/°C
± 0.1 % to ± 10 %
R ± 0.02 %
0.1 ppm/V
30 V to 200 V
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 25 dB
R ± 0.01 %
CONDITIONS
- 55 °C to + 125 °C
+ 25 °C
2000 h at + 70 °C
1 year at + 25 °C
COMPONENT RATINGS
CASE SIZE
POWER
RATING
(mW)
50
125
200
150
225
150
250
800
1000
500
50
100
RESISTANCE RANGE () BY CHARACTERISTICS TOLERANCE
WORKING
VOLTAGE
E
E
H, K, L, M
H, K, L, M
(V)
(0.1 %, 0.25 %, 0.5 %)
(1 %, 2 %, 5 %)
(0.1 %, 0.25 %, 0.5 %)
(1 %, 2 %, 5 %)
40
49.9 to 150K
49.9 to 150K
20 to 150K
20 to 150K
40
49.9 to 301K
49.9 to 301K
20 to 301K
20 to 301K
75
49.9 to 649K
49.9 to 649K
10 to 649K
10 to 649K
125
49.9 to 1.69M
49.9 to 1.69M
10 to 1.69M
10 to 1.69M
175
49.9 to 3.16M
49.9 to 3.16M
10 to 3.16M
10 to 3.16M
50
49.9 to 475K
49.9 to 475K
10 to 475K
10 to 475K
100
49.9 to 1.5M
49.9 to 1.5M
10 to 1.5M
10 to 1.5M
150
49.9 to 4.02M
49.9 to 4.02M
10 to 4.02M
10 to 4.02M
200
49.9 to 6.19M
49.9 to 6.19M
10 to 6.19M
10 to 6.19M
75
49.9 to 1M
49.9 to 1M
49.9 to 1M
49.9 to 1M
30
49.9 to 100K
49.9 to 100K
20 to 100K
20 to 100K
50
49.9 to 258K
49.9 to 261K
10 to 258K
10 to 261K
M55342/01
M55342/02
M55342/03
M55342/04
M55342/05
M55342/06
D55342/07
M55342/08
M55342/09
M55342/10
M55342/11
M55342/12
Note
• Values listed are a guide, refer to MIL spec for value/tolerance allowance
Revision: 13-Mar-13
Document Number: 60018
65
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
E/H (Military M/D55342)
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches
D
W
T
E
L
CASE SIZE
TERM.
L
W
T
D
E
M55342/01
B
0.055 ± 0.006
0.025 ± 0.005
0.010 to 0.030
0.010 ± 0.005
0.015 ± 0.005
M55342/02
B
0.055 ± 0.006
0.050 ± 0.005
0.012 to 0.033
0.010 ± 0.005
0.015 ± 0.005
M55342/03
B
0.105 ± 0.007
0.050 ± 0.005
0.015 to 0.033
0.015 ± 0.005
0.015 ± 0.005
M55342/04
B
0.155 ± 0.007
0.050 ± 0.005
0.015 to 0.033
0.015 ± 0.005
0.015 ± 0.005
M55342/05
B
0.230 ± 0.007
0.075 ± 0.005
0.015 to 0.033
0.020 ± 0.005
0.020 ± 0.005
M55342/06
B
0.080 ± 0.006
0.050 ± 0.005
0.015 to 0.033
0.016 ± 0.008
0.015 ± 0.005
D55342/07
B
0.126 ± 0.008
0.063 ± 0.005
0.015 to 0.033
M55342/08
B
0.209 + 0.009/- 0.018
0.098 ± 0.005
0.015 to 0.033
M55342/09
B
0.259 + 0.009/- 0.015
0.124 ± 0.005
0.015 to 0.033
0.020 ± 0.005
0.020 ± 0.005
M55342/10
B
0.105 ± 0.007
0.100 ± 0.005
0.015 to 0.033
0.015 ± 0.005
0.015 ± 0.005
M55342/11
B
0.040 ± 0.005
0.025 ± 0.005
0.010 to 0.030
0.010 ± 0.005
0.015 ± 0.005
M55342/12
B
0.064 ± 0.006
0.032 ± 0.005
0.010 to 0.033
0.012 ± 0.005
0.015 ± 0.005
0.020 + 0.005/- 0.010 0.020 + 0.005/- 0.010
0.020 ± 0.005
0.020 ± 0.005
ENVIRONMENTAL TESTS
MIL-PRF-55342 LIMITS
(R ±)
VISHAY PERFORMANCE
(R ±)
Thermal Shock
0.1 %
0.020 %
Low Temperature Operation
0.1 %
0.025 %
Short Time Overload
0.1 %
0.050 %
High Temperature Exposure
0.1 %
0.009 %
Resistance to Bonding
0.2 %
0.006 %
Moisture Resistance
0.2 %
0.004 %
± 25 ppm/°C
< 15 ppm/°C
Life (2000 h at + 70 °C)
0.5 %
0.02 %
Life (10 000 h at + 70 °C)
2.0 %
0.04 %
ENVIRONMENTAL TEST
TCR
MECHANICAL SPECIFICATIONS
Resistive Element
Tamelox
Substrate Material
Alumina
Chip Terminations
Solder over nickel
Fused Solder
Revision: 13-Mar-13
FSCM CAGE # - 57489
Plated solder 90/10
Document Number: 60018
66
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
E/H (Military M/D55342)
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: M55342E06B1C00RTS
M
5
5
3
GLOBAL
TCR
MODEL CHARACTERISTIC
M55342
or
D55342
(/07 size
only)
E = 25 ppm/°C
H = 50 ppm/°C
K = 100 ppm/°C
L = 200 ppm/°C
M = 300 ppm/°C
4
2
E
0
CASE
SIZE
TERMINATION
01 = 0502
02 = 0505
03 = 1005
04 = 1505
05 = 2208
06 = 0705
07 = 1206
08 = 2010
09 = 2512
10 = 1010
11 = 0402
12 = 0603
B = Solderable
6
B
1
C
0
0
FAILURE
RATE
OHMIC VALUE
D
E
F
2%
G
H
T
5%
J
K
L
10 %
M
N
P
T
S
V
THIN FILM
CODE (1)
PACKAGING
Three digits and a letter. Letter M = 1.0 %
identifies tolerance, acts as per 1000 h
multiplier and decimal locator. P = 0.1 %
per 1000 h
MULTIPLIER
R = 0.01 %
Tolerance 1  1 k 1 M per 1000 h
S = 0.001 %
0.1 %
A
B
C
per 1000 h
0.25 %
R
U
V
C = Non ER
version
0.5 %
W
Y
Z
1%
R
Standard Packaging:
V
BS = BULK
for
K, L and M
100 min., 1 mult
TCR
WS =WAFFLE
W/tolerance
100 min., 1 mult
1%
W0 =WAFFLE
M = Part
100 min.,100 mult
marked (2)
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel ( 2K, 4K, or
5K dependent on case
size ) per tape and reel
document 60034
TS = 100 min., 1 mult
Special Packaging:
WAFFLE
WI = 100 min., 1 mult
(item single lot date code)
WP =100 min., 1 mult
(package unit single lot
date code)
TAPE AND REEL
TI = 100 min., 1 mult
(item single lot date code)
TP = 100 min., 1 mult
(package unit single lot
date code)
Historical Part Number example: M55342K06B5E60R (for reference purposes only)
M55342
K
06
B
5E60
R
SERIES
TCR
CHARACTERISTIC
CASE SIZE
TERMINATION
VALUE AND
TOLERANCE
FAILURE RATE
Notes
(1) Only add a V at the end of part number to specify Vishay Dale Thin Film for K, L and M TCR and tolerance 1 % and higher
(2) Option 1 marking only case size 01, 02, 11, 12 not available due to size
Revision: 13-Mar-13
Document Number: 60018
67
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
E/H (T-Level) (Military M/D55342)
www.vishay.com
Vishay Dale Thin Film
QPL MIL-PRF-55342 Qualified Thin Film Resistor,
Surface Mount Chip
FEATURES
• T-level (space) qualified
• Passes outgassing
requirements
requirements
of
ASTM-E595
• TCR to ± 25 ppm/°C
• Tolerances to ± 0.1 %
• 100 % power conditioning
Thin Film MIL-PRF-55342 established reliability “T” level
chip resistors feature a thin film resistor element and with all
sputtered wraparound terminations that provide excellent
adhesion and dimensional uniformanity. They are ideal in
applications requiring stringent performance requirements.
Established reliability is assured through 100 % screening
and extensive environmental testing for every lot that
includes complete 100 % group A, power conditioning and
group B lot testing performed for T-level product assurance.
TYPICAL PERFORMANCE
ABSOLUTE
TCR
25
TOL.
0.1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Resistance Range
TCR: Absolute
SPECIFICATIONS
CONDITIONS
Tamelox resistor film (passivated nichrome)
-
100  to 1.5 M
-
25 ppm/°C (E), 50 ppm/°C (H)
- 55 °C to + 125 °C
Tolerance: Absolute
± 0.1 %
+ 25 °C
Stability: Absolute
R ± 0.02 %
2000 h at + 70 °C
Voltage Coefficient
< 0.1 ppm/V
-
Working Voltage
40 V to 125 V
-
Operating Temperature Range
- 55 °C to + 125 °C
-
Storage Temperature Range
- 55 °C to + 150 °C
-
< - 25 dB
-
Thermal EMF
< 0.1 μV/°C
-
Shelf Life Stability: Absolute
R ± 0.01 %
1 year at + 25 °C
Noise
COMPONENT RATINGS
RESISTANCE RANGE () BY CHARACTERISTICS TOLERANCE
CASE SIZE
MAX.
WORKING
VOLTAGE
(V)
POWER
RATING
(mW)
E
(0.1 %, 0.25 %, 0.5 %)
E
(1 %, 2 %, 5 %)
H, K, L, M
(0.1 %, 0.25 %, 0.5 %)
H, K, L, M
(1 %, 2 %, 5 %)
M55342/02
40
125
49.9 to 301K
49.9 to 301K
20 to 301K
20 to 301K
M55342/03
75
200
49.9 to 649K
49.9 to 649K
10 to 649K
10 to 649K
M55342/04
125
150
49.9 to 1.69M
49.9 to 1.69M
10 to 1.69M
10 to 1.69M
M55342/06
50
150
49.9 to 475K
49.9 to 475K
10 to 475K
10 to 475K
D55342/07
100
250
49.9 to 1.5M
49.9 to 1.5M
10 to 1.5M
10 to 1.5M
M55342/10
75
500
49.9 to 1M
49.9 to 1M
49.9 to 1M
49.9 to 1M
Revision: 13-Mar-13
Document Number: 60060
68
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
E/H (T-Level) (Military M/D55342)
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches
D
W
T
E
L
CASE SIZE
TERM.
L
W
T
D
E
M55342/02
B
0.055 ± 0.006
0.050 ± 0.003
0.012 to 0.033
0.010 ± 0.005
0.015 ± 0.005
M55342/03
B
0.105 ± 0.007
0.050 ± 0.003
0.015 to 0.033
0.015 ± 0.005
0.015 ± 0.005
M55342/04
B
0.155 ± 0.007
0.050 ± 0.003
0.015 to 0.033
0.015 ± 0.005
0.015 ± 0.005
M55342/06
B
0.080 ± 0.006
0.050 ± 0.003
0.015 to 0.033
0.016 ± 0.008
0.015 ± 0.005
D55342/07
B
0.126 ± 0.008
0.063 ± 0.005
0.015 to 0.033
M55342/10
B
0.105 ± 0.007
0.100 ± 0.005
0.015 to 0.033
0.020 + 0.005/- 0.010 0.020 + 0.005/- 0.010
0.015 ± 0.005
0.015 ± 0.005
ENVIRONMENTAL TESTS
MIL-PRF-55342 LIMITS
(R ±)
VISHAY PERFORMANCE
(R ±)
Thermal Shock
0.10 %
0.02 %
Low Temperature Operation
0.10 %
0.03 %
Short Time Overload
0.10 %
0.05 %
High Temperature Exposure
0.10 %
0.01 %
Resistance to Bonding
0.20 %
0.01 %
Moisture Resistance
0.20 %
0.04 %
± 25 ppm/°C
< 15 ppm/°C
Life (2000 h at + 70 °C)
0.05 %
0.02 %
Life (10 000 h at + 70 °C)
2.00 %
0.04 %
ENVIRONMENTAL TEST
TCR
MECHANICAL SPECIFICATIONS
Resistive Element
Tamelox
Substrate Material
Alumina
Chip Terminations
Solder over nickel
Fused Solder
Revision: 13-Mar-13
Plated solder SN 90/10
Document Number: 60060
69
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
E/H (T-Level) (Military M/D55342)
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
Global Part Numbering: M55342E06B1C00TTS
M
5
5
MODEL
TCR
CHARACTERISTIC
M55342
or
D55342
(/07 size
only)
E = 25 ppm/°C
H = 50 ppm/°C
K = 100 ppm/°C (1)
L = 200 ppm/°C
M = 300 ppm/°C (1)
3
4
CASE
SIZE
2
E
0
TERMINATION
7
B
1
C
0
0
PRODUCT
LEVEL
DESIGNATOR
OHMIC VALUE
02 = 0505 B = Solderable Three digits and a letter. Letter
identifies tolerance, acts as
03 = 1005
multiplier and decimal locator.
04 = 1505
06 = 0705
MULTIPLIER
07 = 1206
Tolerance 1  1 k 1 M
10 = 1010
0.1 %
A
B
C
0.25 %
R
U
V
0.5 %
W
Y
Z
1%
D
E
F
2%
G
H
T
5%
J
K
L
10 %
M
N
P
T=
Space level
T
T
S
PACKAGING
BS = BULK
1 min., 1 mult
WAFFLE PACK
WS = WAFFLE
25 min., 1 mult
WI = 25 min., 1 mult
(item single lot date code)
WP = 25 min., 1 mult
(package unit single lot
date code)
W0 = 100 min.,100 mult
V
VENDOR
V=
Vishay
Thin
Film (1)
M=
Part
marked (2)
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel
TS = 100 min., 1 mult
TI = 100 min., 1 mult
(item single lot date code)
TP = 100 min., 1 mult
(package unit single lot
date code)
Notes
(1) For K, L and M TCR  1 % tolerance add a V at end of part number to specify Vishay Thin Film vs. Dale Thick Film.
E.g.: M55342K06B1F00TWSV
(2) Option 1 marking only case size 02 not available
• Consult factory for additional case size qualification pending
Revision: 13-Mar-13
Document Number: 60060
70
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
E/H (Ta2N) (Military M/D55342)
www.vishay.com
Vishay Dale Thin Film
QPL MIL-PRF-55342 Qualified
Ta2N Thin Film Resistor, Surface Mount Chip
FEATURES
Thin Film MIL chip resistors feature an all sputtered
wraparound termination for excellent adhesion and
dimensional uniformity. They are ideal in applications
requiring stringent performance requirements. Established
reliability is assured through 100 % screening and extensive
environmental lot testing.
CONSTRUCTION
Passivation
• Established reliability, “R” failure rate level (0.01 % per
1000 h), C = 2
• High purity alumina substrate 99.5% Al2O3
• Wraparound termination featuring a tenacious adhesion
layer covered with an electroplated nickel barrier layer for
+ 150 °C operating conditions
• Very low noise and voltage coefficient
(< - 25 dB, 0.5 ppm/V)
• Non-inductive
• Laser-trimmed tolerances ± 0.1 %
• Complete MIL-testing available in-house
• Antistatic waffle pack or tape and reel packaging available
• Military/aerospace/QPL approval
TYPICAL PERFORMANCE
Tantalum Nitride
Resistor Film
Solder
Coating
ABSOLUTE
TCR
25
TOL.
0.1
Nickel Barrier
High Purity
Alumina Substrate
Adhesion Layer
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Resistance Range
TCR: Absolute
Tolerance: Absolute
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Shelf Life Stability: Absolute
SPECIFICATIONS
Tantalum nitride (Ta2N) resistor film
49.9  to 3.3 M
± 25 ppm/°C to ± 300 ppm/°C
± 0.1 % to ± 10 %
R ± 0.02 %
0.1 ppm/V
30 V to 200 V
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 25 dB
R ± 0.01 %
CONDITIONS
- 55 °C to + 125 °C
+ 25 °C
2000 h at + 70 °C
1 year at + 25 °C
COMPONENT RATINGS
CASE SIZE
M55342/01
M55342/02
M55342/03
M55342/04
M55342/05
M55342/06
D55342/07
M55342/08
M55342/09
M55342/10
M55342/11
M55342/12
POWER
RATING
(mW)
50
125
200
150
225
150
250
800
1000
500
50
100
WORKING
VOLTAGE
(V)
40
40
75
125
175
50
100
150
200
75
30
50
RESISTANCE RANGE BY TOLERANCE
0.1 %, 0.25 %, 0.5 %, 1 %
2.0 % and 5.0 %
10 %
49.9  to 64.9 k
49.9  to 140 k
49.9  to 357 k
49.9  to 806 k
49.9  to 1.5 M
49.9  to 309 k
49.9  to 1 M
49.9  to 2.0 M
49.9  to 3.01 M
49.9  to 604 k
49.9  to 49.9 k
49.9  to 130 k
51  to 68 k
51  to 150 k
51  to 360 k
51  to 820 k
51  to 1.5 M
51  to 820 k
51  to 1 M
49.9  to 2.0 M
51  to 3 M
51  to 620 k
51  to 51 k
51  to130 k
51  to 68 k
51  to 150 k
51  to 360 k
51  to 820 k
51  to 1.5 M
51  to 820 k
51  to 1 M
51  to 2.23 M
51  to 3.3 M
51  to 680 k
51  to 51 k
51  to 150 k
Note
• Values listed are a guide, refer to MIL spec for value/tolerance allowance
Revision: 28-May-13
Document Number: 60120
71
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
E/H (Ta2N) (Military M/D55342)
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches
D
W
T
E
L
CASE SIZE
TERM.
L
W
T
D
E
M55342/01
B
0.055 ± 0.006
0.025 ± 0.005
0.010 to 0.030
0.010 ± 0.005
0.015 ± 0.005
M55342/02
B
0.055 ± 0.006
0.050 ± 0.005
0.012 to 0.033
0.010 ± 0.005
0.015 ± 0.005
M55342/03
B
0.105 ± 0.007
0.050 ± 0.005
0.015 to 0.033
0.015 ± 0.005
0.015 ± 0.005
M55342/04
B
0.155 ± 0.007
0.050 ± 0.005
0.015 to 0.033
0.015 ± 0.005
0.015 ± 0.005
M55342/05
B
0.230 ± 0.007
0.075 ± 0.005
0.015 to 0.033
0.020 ± 0.005
0.020 ± 0.005
0.016 ± 0.008
0.015 ± 0.005
M55342/06
B
0.080 ± 0.006
0.050 ± 0.005
0.015 to 0.033
D55342/07
B
0.126 ± 0.008
0.063 ± 0.005
0.015 to 0.033
M55342/08
B
0.209 + 0.009/- 0.018
0.098 ± 0.005
0.015 to 0.033
0.020 ± 0.005
M55342/09
B
0.259 + 0.009/- 0.015
0.124 ± 0.005
0.015 to 0.033
0.020 ± 0.005
0.020 ± 0.005
M55342/10
B
0.105 ± 0.007
0.100 ± 0.005
0.015 to 0.033
0.015 ± 0.005
0.015 ± 0.005
M55342/11
B
0.040 ± 0.005
0.025 ± 0.005
0.010 to 0.030
0.010 ± 0.005
0.015 ± 0.005
M55342/12
B
0.064 ± 0.006
0.032 ± 0.005
0.010 to 0.033
0.012 ± 0.005
0.015 ± 0.005
0.020 + 0.005/- 0.010 0.020 + 0.005/- 0.010
0.020 ± 0.005
ENVIRONMENTAL TESTS
MIL-PRF-55342 LIMITS
(R ±)
VISHAY PERFORMANCE
(R ±)
Thermal Shock
0.1 %
0.020 %
Low Temperature Operation
0.1 %
0.025 %
Short Time Overload
0.1 %
0.050 %
High Temperature Exposure
0.1 %
0.009 %
Resistance to Bonding
0.2 %
0.006 %
Moisture Resistance
0.2 %
0.004 %
± 25 ppm/°C
< 15 ppm/°C
Life (2000 h at + 70 °C)
0.5 %
0.02 %
Life (10 000 h at + 70 °C)
2.0 %
0.04 %
ENVIRONMENTAL TEST
TCR
MECHANICAL SPECIFICATIONS
Resistive Element
Tantalum nitride (Ta2N)
Substrate Material
Alumina
Chip Terminations
Solder over nickel
Plated Solder
Revision: 28-May-13
FSCM CAGE # - 57489
90/10
Document Number: 60120
72
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
E/H (Ta2N) (Military M/D55342)
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: M55342E06B9B00MT12
M
5
5
GLOBAL
TCR
MODEL CHARACTERISTIC
M55342
or
D55342
(/07 size
only)
E = 25 ppm/°C
H = 50 ppm/°C
K = 100 ppm/°C
L = 200 ppm/°C
M = 300 ppm/°C
3
4
2
E
0
6
9
B
CASE
SIZE
TERMINATION
OHMIC VALUE
01 = 0502
02 = 0505
03 = 1005
04 = 1505
05 = 2208
06 = 0705
07 = 1206
08 = 2010
09 = 2512
10 = 1010
11 = 0402
12 = 0603
B = Solderable
Three digits and a letter. Letter
identifies tolerance, acts as
multiplier and decimal locator.
Tolerance
0.1 %
0.25 %
0.50 %
1%
2%
5%
10 %
Revision: 28-May-13
B
0
FAILURE
RATE
0
M
T
PACKAGING
1
4
THIN FILM
CODE (1)
M = 1.0 % Standard Packaging:
4
per 1000 h BS = BULK
for
P = 0.1 %
Ta2N
100 min., 1 mult
per 1000 h WS =WAFFLE
resistor film
MULTIPLIER
R = 0.01 %
type
100 min., 1 mult
1  1 k 1 M per 1000 h
TAPE AND REEL
A
B
C
T0 = 100 min., 100 mult
R
U
V
T1 = 1000 min., 1000 mult
T3 = 300 min., 300 mult
W
Y
Z
T5 = 500 min., 500 mult
D
E
F
TF = Full reel ( 2K, 4K, or
G
H
T
5K dependent on case
J
K
L
size ) per tape and reel
document 60034
M
N
P
TS = 100 min., 1 mult
Special Packaging:
WAFFLE
WI = 100 min., 1 mult
(item single lot date code)
WP =100 min., 1 mult
(package unit single lot
date code)
TAPE AND REEL
TI = 100 min., 1 mult
(item single lot date code)
TP = 100 min., 1 mult
(package unit single lot
date code)
Document Number: 60120
73
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
D.S.C.C. Specifications
www.vishay.com
Vishay Dale Thin Film
D.S.C.C. Specifications (Formerly DESC)
Vishay Thin Film (Niagara Falls) is listed on the following D.S.C.C. specifications:
D.S.C.C. SPECIFICATIONS SURFACE MOUNT RESISTOR NETWORKS
06018
3 PIN Surface Mount SOT-23 Voltage Divider
87012
16 PIN Surface Mount Gull Wing Resistor Network
87014
16 PIN Leadless Chip Carrier
87015
28 PIN Leadless Chip Carrier
87016
20 PIN Leadless Chip Carrier
87017
20 PIN Leadless Chip Carrier THICK FILM
87018
16 PIN Leadless Chip Carrier
87025
8 PIN DIP HERMETIC
87032
10 PIN SIP
D.S.C.C. SPECIFICATIONS SURFACE MOUNT CHIP RESISTORS
87011
Zero Ohm Wraparound Chip (1010 Size)
90047
Zero Ohm Wraparound Chip (2208 Size)
90048
Zero Ohm Wraparound Chip (0805 Size)
90049
Zero Ohm Wraparound Chip (1005 Size)
90092
Zero Ohm Wraparound Chip (1505 Size)
94011
Zero Ohm Wraparound Chip (1206 Size)
94012
0505 MOISTURE RESISTANT PTN Wraparound Chip Resistor (0505 Size)
94013
1005 MOISTURE RESISTANT PTN Wraparound Chip Resistor (1005 Size)
94014
2208 MOISTURE RESISTANT PTN Wraparound Chip Resistor (2208 Size)
94015
0705 MOISTURE RESISTANT PTN Wraparound Chip Resistor (0705 Size)
94016
1206 MOISTURE RESISTANT PTN Wraparound Chip Resistor (1206 Size)
94017
2010 MOISTURE RESISTANT PTN Wraparound Chip Resistor (2010 Size)
94018
2512 MOISTURE RESISTANT PTN Wraparound Chip Resistor (2512 Size)
94019
1010 MOISTURE RESISTANT PTN Wraparound Chip Resistor (1010 Size)
94025
0502 MOISTURE RESISTANT PTN Wraparound Chip Resistor (0502 Size)
94026
1505 MOISTURE RESISTANT PTN Wraparound Chip Resistor (1505 Size)
04008
0402 MOISTURE RESISTANT PTN Wraparound Chip Resistor (0402 Size)
04009
0603 MOISTURE RESISTANT PTN Wraparound Chip Resistor (0603 Size)
02008
Low and High Values, 1.0 M to 10 M (1206 Size)
02010
Low Values, 0.1  to 1  (1206 Size)
03022
Low Values, 0.1  to 1  (0603 Size)
12005
Low Value Chip Resistor 1005 Case Size 0.1  to 0.999 
12006
Low Value Chip Resistor 1505 Case Size 0.1  to 0.999 
12008
Low Value Chip Resistor 0705 Case Size 0.1  to 0.999 
12009
Low Value Chip Resistor 2010 Case Size 0.1  to 0.999 
12010
Low Value Chip Resistor 2512 Case Size 0.1  to 0.999 
Revision: 30-Jul-12
Document Number: 60020
74
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P-NS
www.vishay.com
Vishay Dale Thin Film
Commercial Thin Film Resistor, Surface Mount Chip
FEATURES
Actual Size
0505
For applications requiring low noise, stability, low
temperature coefficient of resistance, and low voltage
coefficient, all Vishay’s proven precision thin film
wraparound resistors will meet your exact requirements.
Manufactured with the same material and processes as QPL
and manufactured in a QPL facility.
CONSTRUCTION
SPM Passivation
Enhancement
• Moisture resistant (SPM) special passivation
method
Available
• Non-standard values available
• Pre-tinned terminations over nickel barrier
Available
(gold available)
• Very low noise and voltage coefficient
(< - 35 dB, 0.1 ppm/V)
Available
• Non-inductive
• Laser-trimmed tolerances to 0.02 %
Available
• In-lot tracking less than 5 ppm/°C
• Epoxy bondable termination available
• Sulfur resistant (per ASTM B809-95 humid vapor test)
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
Passivated Nichrome
Resistive Film
Solder
Coating
Nickel Barrier
TYPICAL PERFORMANCE
High Purity
Alumina Substrate
Adhesion Layer
ABSOLUTE
TCR
TOL.
25
0.1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Resistance Range
TCR: Absolute
Tolerance: Absolute
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Shelf Life Stability: Absolute
SPECIFICATIONS
Passivated nichrome
10  to 6.19 M
± 10 ppm/°C to 100 ppm/°C
± 0.02 % to ± 5 %
R ± 0.02 %
0.1 ppm/V (typical)
75 V to 200 V
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 35 dB (typical)
R ± 0.01 %
CONDITIONS
- 55 °C to + 125 °C
+ 25 °C
2000 h at 70 °C
1 year at + 25 °C
COMPONENT RATINGS
CASE SIZE (1)
POWER RATING
(mW)
50
100
150
150
250
250
250
500
400
400
800
800
1000
WORKING VOLTAGE
(V)
75
75
75
75
100
100
100
150
200
150
150
200
200
0402
0502
0505
0603
0705
0805
1005
1010
1206
1505
2208
2010
2512
Notes
(1) 0705 and 0805 are the same (only use 0805 when ordering)
(2) Values > 1M best TCR ± 25 ppm/°C
Revision: 27-Jun-13
RESISTANCE RANGE ()
 0.1 %
< 0.1 %
25 to 100K
250 to 100K
20 to 150K
250 to 150K
20 to 301K
250 to 301K
10 to 261K
250 to 261K
10 to 475K
250 to 475K
10 to 475K
250 to 475K
10 to 649K
250 to 649K
50 to 1M
250 to 1M
250 to 1M
10 to 1.5M (2)
10 to 1M
250 to 1M
250 to 1M
10 to 3.16M (2)
250 to 1M
10 to 4.02M (2)
250 to 1M
10 to 6.19M (2)
Document Number: 60023
75
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P-NS
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches
D
W
T
L
E
CASE SIZE
TERM
L
W
0402
B
0.042 ± 0.008
0.022 ± 0.005
0502
B
0.055 ± 0.006
0.025 ± 0.005
0505
B
0.055 ± 0.006
0.050 ± 0.005
0603
B
0.064 ± 0.006
0.032 ± 0.005
0705, 0805 (1)
B
0.080 ± 0.006
0.050 ± 0.005
1005
B
0.105 ± 0.007
0.050 ± 0.005
1010
B
0.105 ± 0.007
0.100 ± 0.005
1206
B
0.126 ± 0.008
0.063 ± 0.005
1505
B
0.155 ± 0.007
0.050 ± 0.005
2010
B
0.209 ± 0.009
0.098 ± 0.005
2208
B
0.230 ± 0.007
0.075 ± 0.005
2512
B
0.259 ± 0.009
0.124 ± 0.005
Note
(1) 0705 and 0805 are the same (only use 0805 when ordering)
T
0.012 to 0.033
0.012 to 0.033
0.012 to 0.033
0.020 max.
0.015 to 0.033
0.015 to 0.033
0.015 to 0.033
0.015 to 0.033
0.015 to 0.033
0.015 to 0.033
0.015 to 0.033
0.015 to 0.033
ENVIRONMENTAL TESTS
Thermal Shock
0.02
0.02
Short Time Overload
0.01
0.01
Low Temperature Operation
0.01
0.01
Resistance to Solder Heat
0.04
0.03
Moisture Resistance
0.02
0.01
High Temperature Exposure
0.03
0.06
Load Life (10 000 h, + 70 °C)
0.05
0.05
± 25 ppm/°C
± 25 ppm/°C
100
Precent of Rated Power
100 k R
± (%)
TCR
E
0.010 ± 0.005
0.015 ± 0.005
0.015 ± 0.005
0.015 ± 0.005
0.015 ± 0.005
0.015 ± 0.005
0.015 ± 0.005
0.020 + 0.005/- 0.010
0.015 ± 0.005
0.020 ± 0.005
0.020 ± 0.005
0.020 ± 0.005
DERATING CURVE
10 k R
± (%)
ENVIRONMENTAL TEST
D
0.010 ± 0.005
0.010 ± 0.005
0.010 ± 0.005
0.012 ± 0.005
0.016 ± 0.008
0.015 ± 0.005
0.015 ± 0.005
0.020 + 0.005/- 0.010
0.015 ± 0.005
0.020 ± 0.005
0.020 ± 0.005
0.020 ± 0.005
80
60
40
20
0
0
70
125
150
Ambient Temperature °C
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: P-1206E1002BBTS
P
-
GLOBAL CASE
MODEL SIZE
P-
0402
0502
0505
0603
0805
1005
1010
1206
1505
2208
2010
2512
1
2
TCR
CHARACTERISTIC
Y = ± 10 ppm/°C (2)
D = ± 15 ppm/°C
E = ± 25 ppm/°C
H = ± 50 ppm/°C
K = ± 100 ppm/°C
Note
(2) > 250 
0
6
E
1
0
0
2
B
B
T
S
RESISTANCE
TOLERANCE
TERMINATION
PACKAGING
The first 3 digits
are significant figures
and the
last digit specifies the
number of
zeros to follow.
“R” designates the
decimal point.
Example:
10R0 = 10 
1001 = 1 k
1002 = 10 k
Q = ± 0.02 % (3)
A = ± 0.05 % (3)
B = ± 0.1 %
D = ± 0.5 %
F=±1%
G=±2%
J=±5%
B = Wraparound
Sn/Pb solder
63 % Sn/37 % Pb
w/ nickel barrier
G = Wraparound Au
over Ni (gold)
termination
epoxy bondable
RoHS-compliant - e4
S = Wraparound
electroplated 100 %
pure matte tin
RoHS-compliant e3
BULK
BS = 100 min., 1 mult
WAFFLE
WS = 100 min., 1 mult
W0 = 100 min.,100 mult
WI = 100 min.,1 mult (4)
WP = 100 min.,1 mult (5)
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult (6)
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel
TS = 100 min., 1 mult
TI = 100 min., 1 mult (4)
TP = 100 min., 1 mult (5)
Notes
(4) Item single lot date code
(5) Package unit single lot date code
(6) Preferred packaging code
Note
(3) For values
 250 
Historical Part Number Example: P0805H6801BBT (for reference purposes only)
P
0805
H
6801
B
B
T
STYLE
CASE SIZE
TCR CHARACTERISTIC
OHMIC VALUE
TOLERANCE
TERMINATION
PACKAGING
Revision: 27-Jun-13
Document Number: 60023
76
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PTN
www.vishay.com
Vishay Dale Thin Film
Commercial Thin Film Chip Resistor,
Surface Mount Chip
FEATURES
•
•
•
•
Actual Size
1505
These chip resistors are available in both “top side” and
“wraparound” termination styles in a variety of sizes. They
incorporate self passivated, enhanced Tantalum Nitride
films, to give superior performance on moisture resistance,
voltage coefficient, power handling and resistance stability.
The terminations consist of an adhesion layer, a leach
resistant nickel barrier, and solder coating. This product will
out-perform all requirements of characteristic E of
MIL-PRF-55342.
CONSTRUCTION
Passivation
Tantalum Nitride
Resistive Film
•
•
•
•
•
•
•
•
Moisture resistant
High purity alumina substrate
Non-standard values available
Available
Will pass + 85 °C, 85 % relative humidity and
Available
10 % rated power
100 % visual inspected per MIL-PRF-55342
Non-inductive
Available
Very low noise and voltage coefficient (< - 30 dB)
Laser-trimmed tolerances to ± 0.1 %
Available
Wraparound resistance less than 10 m
Epoxy bondable termination available
Sulfur resistant (per ASTM B809-95 humid vapor test)
Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
TYPICAL PERFORMANCE
Solder
Coating
ABSOLUTE
Nickel Barrier
High Purity
Alumina Substrate
Adhesion Layer
TCR
25
TOL.
0.1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Resistance Range
TCR: Absolute
Tolerance: Absolute
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Shelf Life Stability: Absolute
SPECIFICATIONS
Tantalum nitride
10  to 3 M
± 25 ppm/°C to ± 100 ppm/°C
± 0.1 % to ± 5 %
R ± 0.03 %
0.1 ppm/V
75 V to 200 V
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 30 dB
-
CONDITIONS
- 55 °C to + 125 °C
+ 25 °C
2000 h at 70 °C
-
COMPONENT RATINGS
CASE SIZE (1)
POWER RATING (mW)
0402
50
0502
100
0505
150
0603
150
0705
200
0805
200
1005
250
1010
500
1206
400
1505
400
2208
750
2010
800
2512
1000
Note
(1) 0705 and 0805 are the same (only use 0805 when ordering)
Revision: 07-Mar-12
WORKING VOLTAGE (V)
75
75
75
75
100
100
100
150
200
150
150
200
200
RESISTANCE RANGE ()
20 to 51.1K
20 to 65K
20 to 130K
10 to 130K
10 to 301K
10 to 301K
10 to 360K
50 to 600K
10 to 1M
10 to 1M
10 to 1.75M
10 to 2M
10 to 3M
Document Number: 60026
77
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PTN
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches
D
W
T
E
L
CASE SIZE
L
W
T
D
E
0402
0.042 ± 0.008
0.022 ± 0.005
0.012 to 0.033
0.010 ± 0.005
0.010 ± 0.005
0502
0.055 ± 0.006
0.025 ± 0.005
0.012 to 0.033
0.010 ± 0.005
0.015 ± 0.005
0505
0.055 ± 0.006
0.050 ± 0.005
0.012 to 0.033
0.010 ± 0.005
0.015 ± 0.005
0.064 ± 0.006
0.032 ± 0.005
0.020 max.
0.012 ± 0.005
0.015 ± 0.005
0.080 ± 0.006
0.050 ± 0.005
0.015 to 0.033
0.015 ± 0.005
0.015 ± 0.005
1005
0.105 ± 0.007
0.050 ± 0.005
0.015 to 0.033
0.015 ± 0.005
0.015 ± 0.005
1010
0.105 ± 0.007
0.100 ± 0.005
0.015 to 0.033
0.015 ± 0.005
0.015 ± 0.005
1206
0.126 ± 0.008
0.063 ± 0.005
0.015 to 0.033
1505
0.155 ± 0.007
0.050 ± 0.005
0.015 to 0.033
0.015 ± 0.005
0.015 ± 0.005
2010
0.209 ± 0.009
0.098 ± 0.005
0.015 to 0.033
0.020 ± 0.005
0.020 ± 0.005
2208
0.230 ± 0.007
0.075 ± 0.005
0.015 to 0.033
0.020 ± 0.005
0.020 ± 0.005
2512
0.259 ± 0.009
0.124 ± 0.005
0.015 to 0.033
0.020 ± 0.005
0.020 ± 0.005
0603
0705, 0805
(1)
0.020 + 0.005/ - 0.010 0.020 + 0.005/ - 0.010
Note
(1) 0705 and 0805 are the same (only use 0805 when ordering)
ENVIRONMENTAL TESTS (Vishay Performance vs. MIL-PRF-55342 Requirements)
LIMITS MIL-PRF-55342
CHARACTERISTIC “E”
TYPICAL VISHAY
PERFORMANCE
Resistance Temperature Characteristic
± 25 ppm/°C
± 15 ppm/°C
Max. Ambient Temp. at Rated Wattage
+ 70 °C
+ 70 °C
Max. Ambient Temp. at Power Derating
+ 150 °C
+ 150 °C
ENVIRONMENTAL TEST
Thermal Shock
R
± 0.1 %
± 0.040 %
Low Temperature Operation
R
± 0.1 %
± 0.001 %
Short Time Overload
R
± 0.10 %
± 0.002 %
High Temperature Exposure
R
± 0.1 %
± 0.04 %
Resistance to Soldering Heat
R
± 0.2 %
± 0.008 %
Moisture Resistance
R
± 0.2 %
± 0.004 %
Life + 70 °C at 1000 h
R
± 0.50 %
± 0.02 %
10 000  minimum
> 100 000 M
Insulation Resistance
Revision: 07-Mar-12
Document Number: 60026
78
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PTN
www.vishay.com
Vishay Dale Thin Film
FILM LOAD LIFE STABILITY (at + 125 °C)
DERATING CURVE
100
Percent of Rated Power
0.1 %
0.06 %
0.05 %
0.04 %
0.03 %
0.02 %
Maximum
Absolute
Change
0.01 %
0.006 %
0.005 %
0.004 %
0.003 %
0.002 %
80
60
40
20
0
0.001 %
200
400
600
800 1000 1200 1400 1600 1800 2000
0
50
Time in h at + 125 °C
100
150
155
200
250
Ambient Temperature °C
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: PTN1206E1002BBT1
P
T
N
1
2
GLOBAL
MODEL
CASE
SIZE
TCR
CHARACTERISTIC
PTN
0402
0502
0505
0603
0805
1005
1010
1206
1505
2208
2010
2512
E = ± 25 ppm/°C
H = ± 50 ppm/°C
K = ± 100 ppm/°C
0
6
E
1
0
0
2
B
RESISTANCE
TOLERANCE
TERMINATION
The first 3 digits are
significant
figures
and the last digit
specifies the number
of zeros to follow.
“R” designates the
decimal point.
B = ± 0.1 %
D = ± 0.5 %
F =±1%
G=±2%
J =±5%
B = Wraparound
Sn/Pb solder
Sn63
w/nickel barrier
G = Wraparound Au
over Ni (gold)
termination
epoxy bondable
RoHS compliant - e4
S = Wraparound
electroplated 100 %
pure matte tin
RoHS-compliant - e3
Example:
10R0 = 10 
1000 = 100 
1001 = 1 k
B
T
1
PACKAGING
BS = BULK
100 min., 1 mult
WS = WAFFLE
100 min., 1 mult
W0 = WAFFLE
100 min., 100 mult
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult (1)
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel
TS = 100 min., 1 mult
Historical Part Number example: PTN0805H8801BBT (for reference purposes only)
PTN
0805
H
8801
B
B
T
STYLE
CASE SIZE
TCR
CHARACTERISTIC
OHMIC VALUE
TOLERANCE
TERMINATION
PACKAGING
Note
(1) Preferred packaging code
Revision: 07-Mar-12
Document Number: 60026
79
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
L-NS
www.vishay.com
Vishay Dale Thin Film
Low Value (0.03  to 10 )
Thin Film Resistor, Surface Mount Chip
FEATURES
• Homogeneous nickel alloy film
• No inductance for high-frequency applications
• Alumina substrates for high power handling
capability (2 W maximum power rating)
• Pre-soldered or gold terminations
• Epoxy bondable termination available
• Sulfur resistant (per ASTM B809-95 humid
vapor test)
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
Actual Size
0805
With extremely low resistances and high power capabilities,
Vishay’s proven and unique ultra-low value resistors can be
used in your hybrid or surface-mount applications. These
resistors are available with solderable or weldable
terminations.
Available
Available
Available
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
TYPICAL PERFORMANCE
ABSOLUTE
TCR
TOL.
CONSTRUCTION
Passivation
Available
300
1.0
Resistor Film
VALUE AND MINIMUM TOLERANCE
Solder
Coating
Nickel Barrier
High Purity
Alumina
Adhesion Layer
VALUE ()
0.1
0.25
0.5
1.0
2.0
10.0
< 0.1
MINIMUM TOLERANCE
± 2.0 %
± 1.0 %
± 1.0 %
± 1.0 %
± 1.0 %
± 1.0 %
20 %
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Resistance Range
TCR: Absolute
Tolerance: Absolute
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Shelf Life Stability: Absolute
SPECIFICATIONS
Nickel alloy
0.03  to 10 
± 300 ppm/°C
1 % to 20 % (value dependent)
P x R
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 35 dB (typical)
-
CONDITIONS
- 55 °C to + 125 °C
-
COMPONENT RATINGS
CASE SIZE (1)
POWER RATING (mW)
0505
125
0508
400
0603
125
0612
500
0705/0805
200
1005
250
1020
1000
1206
330
1225
2000
1505
500
2010
1000
2512
2000
Notes
• Resistor values beyond ranges shall be reviewed by the factory
(1) 0705 and 0805 are the same (only use 0805 when ordering)
Revision: 11-Jun-13
RESISTANCE RANGE ()
0.05 to 5.0
0.03 to 2.0
0.10 to 5.0
0.05 to 2.5
0.10 to 6.0
0.15 to 10.0
0.03 to 3.0
0.10 to 10.0
0.03 to 2.6
0.25 to 10.0
0.17 to 10.0
0.18 to 10.0
Document Number: 60027
80
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
L-NS
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches and millimeters
D
W
T
L
SIZE
L
CASE SIZE
INCHES
W
T
MILLIMETERS INCHES MILLIMETERS
INCHES
D
MILLIMETERS
MAX.
INCHES
MILLIMETERS
+ 0.010/- 0.005
+ 0.25/- 0.13
± 0.005
± 0.13
+ 0.010/- 0.005
+ 0.25/- 0.13
0505
0.050
1.27
0.050
1.27
0.020
0.51
0.016
0.41
0508
0.047
1.19
0.081
2.06
0.020
0.51
0.015
0.38
0603
0.064
1.65
0.032
0.81
0.020
0.51
0.012
0.30
0612
0.063
1.60
0.126
3.20
0.020
0.51
0.015
0.38
0705, 0805 (1)
0.075
1.91
0.050
1.27
0.020
0.51
0.021
0.53
1005
0.100
2.54
0.050
1.27
0.030
0.76
0.021
0.53
1020
0.100
2.54
0.200
5.08
0.030
0.76
0.015
0.38
1206
0.126
3.20
0.063
1.60
0.030
0.76
0.020
0.51
1225
0.126
3.20
0.252
5.59
0.020
0.51
0.020
0.51
1505
0.150
3.81
0.050
1.27
0.030
0.76
0.021
0.53
2010
0.200
5.08
0.100
2.54
0.030
0.76
0.019
0.48
2512
0.250
6.35
0.125
3.18
0.030
0.76
0.019
0.48
Note
(1) 0705 and 0805 are the same (only use 0805 when ordering)
MECHANICAL SPECIFICATIONS
Resistive Element
Nickel alloy
Substrate Material
Alumina
Terminals
Pre-soldered or gold
Lead (Pb)-free Option
96.5 % Sn, 3.0 % Ag, 0.5 % Cu
Tin/Lead Option
Sn63
Lead (Pb)-free Finish and Tin/Lead
Hot solder dip
DERATING CURVE
LIMITS (1)
R ± %
TYPICAL
1  R ± %
STO (2)
0.5
- 0.19
LTO
0.1
- 0.03
RSH
0.5
- 0.14
Moisture
0.5
0.07
HTE
1.0
0.02
Load Life (2000 h at + 70 °C)
0.5
0.20
± 300
+ 150
ENVIRONMENTAL TEST
TCR (ppm)
Notes
(1) 0.01  additional allowed for measurement error
(2) Testing conducted at 2.0 x working voltage on 2512 case size all
other 2.5 x
Revision: 11-Jun-13
100
Precent of Rated Power
ENVIRONMENTAL TESTS
80
60
40
20
0
0
70
125
150
Ambient Temperature °C
Document Number: 60027
81
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
L-NS
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: L-1206M1R00GBT1
L
-
1
2
0
6
M
1
GLOBAL
MODEL
CASE
SIZE
TCR
CHARACTERISTICS
OHMIC
VALUE
L- = Low value
wraparound
chip resistor
0505
0508
0603
0612
0805 (1)
1005
1020
1206
1225
1505
2010
2512
M = 300 ppm/°C
N = 350 ppm/°C
O = 400 ppm/°C
P = 500 ppm/°C
First 3 digits
are significant
figures and the
last digit
specifies the
number of
zeros to
follow. “R”
designates the
decimal point.
R
0
0
G
B
TOLERANCE
TERMINATION
F=1%
G=2%
H=3%
J=5%
K = 10 %
L = 20 %
B = Wraparound Sn/Pb solder
63 % Sn/37 % Pb w/
nickel barrier
G = Wraparound Au over Ni
(gold) termination
epoxy bondable
RoHS compliant - e4
W = Top side wire bondable
Au (gold)
RoHS compliant - e4
S = Wraparound lead (Pb)-free
solder
96.5 % Sn/3.0 % Ag/
0.5 % Cu
RoHS compliant - e1
Example:
0R10 = 0.1 
1R60 = 1.6 
T
1
PACKAGING
BS = BULK
100 min., 1 mult
WS = WAFFLE
100 min., 1 mult
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult (1)
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel
TI = 100 min., 1 mult
(item single lot date code)
TS = 100 min., 1 mult
Historical Part Number Example: L1206M1R00HBT (for reference purposes only)
L
1206
M
1R00
H
B
T
STYLE
CASE SIZE
TCR
CHARACTERISTICS
OHMIC VALUE
TOLERANCE
TERMINATION
PACKAGING
Note
(1) Preferred packaging code
Revision: 11-Jun-13
Document Number: 60027
82
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
M
www.vishay.com
Vishay Dale Thin Film
High Reliability Thick Film Resistor,
Surface Mount Chip
FEATURES
Actual Size
0502
Utilizing proven expertise in thick and thin film resistors to
satisfy your manufacturing needs, Vishay provides a high rel
chip with the same reliability and stability found in military
grade resistors. These chips are available in the widest
range of sizes, values, and performance characteristics. And
manufactured on the Mil-PRF-55342 qualified controlled
production line All product is 100 % electrical tested for
tolerance and after thermal shock testing and typically meet
the requirements of group A in
MIL-PRF-55342
performance.
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
CONSTRUCTION
Resistor
• High purity alumina substrate for high power
dissipation (2 W max.)
• Wraparound terminations featuring a thin film
Available
adhesion layer covered with a leach resistant
nickel barrier layer for + 150 °C operating
Available
conditions
• High speed laser trimming for high volume
requirements
Available
• Ruthenium based cermet thick film for
dependable performance
Available
• Fired-on glass passivation
• Tape and reel packaging standard; static-free
waffle pack available
• Active trim and 0  chips
• Sulfur resistant (per ASTM B809-95 humid vapor test)
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Overglaze
TYPICAL PERFORMANCE
ABSOLUTE
Alumina Substrate
Inner Electrode
Plated Solder
Nickel Barrier
TCR
100
TOL.
1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Resistance Range
TCR: Absolute
Tolerance: Absolute
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Shelf Life Stability: Absolute
SPECIFICATIONS
Ruthenium
10  to 25 M
± 100 ppm/°C to ± 300 ppm/°C
± 1 % to ± 10 %
R ± 0.15 %
25 V to 200 V
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 35 dB (typical)
-
CONDITIONS
- 55 °C to + 125 °C
-
COMPONENT RATINGS
CASE SIZE (1)
POWER RATING (mW)
0402
100
0502
100
0504
125
0505
125
0603
150
0705
200
0805
200
1005
250
1010
500
1206
330
1505
350
2010
1000
2208
750
2512
2000
Notes
• Consult factory for nominals above 25 M
(1) 0705 and 0805 are the same (only use 0805 when ordering)
Revision: 28-Sep-12
WORKING VOLTAGE (V)
25
25
40
40
40
50
50
75
75
100
100
175
150
200
RESISTANCE RANGE ()
10 to 10M
10 to 25M
10 to 25M
10 to 25M
10 to 25M
10 to 25M
10 to 25M
10 to 25M
10 to 25M
10 to 25M
10 to 25M
10 to 25M
10 to 25M
10 to 25M
Document Number: 60031
83
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
M
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches
D
W
T
E
L
CASE SIZE
TERM
L
W
T
D
E
0402
B
0.042 ± 0.006
0.022 ± 0.005
0.010 to 0.033
0.010 ± 0.005
0.010 ± 0.005
0502
B
0.055 ± 0.005
0.025 ± 0.005
0.020 max.
0.010 ± 0.005
0.015 ± 0.005
0504
B
0.055 ± 0.005
0.040 ± 0.005
0.020 ± 0.005
0.010 ± 0.005
0.010 ± 0.005
0505
B
0.055 ± 0.006
0.050 ± 0.005
0.012 to 0.033
0.010 ± 0.005
0.015 ± 0.005
0603
B
0.064 ± 0.006
0.032 ± 0.005
0.010 to 0.033
0.012 ± 0.005
0.015 ± 0.005
0705, 0805 (1)
B
0.080 ± 0.006
0.050 ± 0.005
0.015 to 0.033
0.015 ± 0.005
0.015 ± 0.005
1005
B
0.105 ± 0.007
0.050 ± 0.005
0.015 to 0.033
0.020 ± 0.005
0.020 ± 0.005
1010
B
0.105 ± 0.007
0.100 ± 0.005
0.015 to 0.033
0.015 ± 0.005
0.015 ± 0.005
1206
B
0.126 ± 0.008
0.063 ± 0.005
0.015 to 0.033
0.020 + 0.005/- 0.010
0.020 + 0.005/- 0.010
1505
B
0.155 ± 0.007
0.050 ± 0.005
0.015 to 0.033
0.020 ± 0.005
0.020 ± 0.005
2010
B
0.197 ± 0.006
0.098 ± 0.005
0.015 to 0.033
0.015 ± 0.005
0.015 ± 0.005
2208
B
0.230 ± 0.007
0.075 ± 0.005
0.015 to 0.033
0.015 ± 0.005
0.015 ± 0.005
2512
B
0.250 ± 0.006
0.124 ± 0.005
0.015 to 0.033
0.020 ± 0.005
0.020 ± 0.005
Note
(1) 0705 and 0805 are the same (only use 0805 when ordering)
ENVIRONMENTAL TESTS
10  R ± (%)
100 k R ± (%)
Thermal Shock
0.02
0.03
Short Term Overload
0.02
0.02
Low Temperature Operation
0.03
0.04
Resistance to Solder Heat
0.06
0.02
Moisture Resistance
0.10
0.08
High Temperature Exposure
0.02
0.02
ENVIRONMENTAL TEST
DERATING CURVE
Precent of Rated Power
100
80
60
40
20
0
0
70
125
150
Ambient Temperature °C
Revision: 28-Sep-12
Document Number: 60031
84
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
M
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: M-1206K5001GBT1
M
-
1
2
0
6
GLOBAL
MODEL
CASE
SIZE
TCR
CHARACTERISTIC
M- = High rel
cermet
thick film
wraparound
0402
0502
0504
0505
0603
0805
1005
1010
1206
1505
2010
2208
2512
K = 100 ppm/°C
M = 300 ppm/°C
X = 0  jumper
K
5
RESISTANCE
0
0
1
TOLERANCE
First 3 digits are
significant figures
and the last digit
specifies
the
number of zeros
to follow. “R”
designates
the
decimal point.
F=1%
G=2%
J=5%
K = 10 %
N = Not
trimmed
G
B
TERMINATION
T
1
PACKAGING
B = Wraparound
tin/lead plated
solder
S = Wraparound
lead (Pb)-free
plated solder
G = Epoxy bondable
Example:
10R0 = 10 
1002 = 10 k
BS = BULK
100 min., 1 mult
WS = WAFFLE
100 min., 1 mult
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult (1)
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel
TS = 100 min., 1 mult
Historical Part Number example: M0505K1003JBT (for reference purposes only)
M
0505
K
1003
J
B
T
STYLE
CASE SIZE
TCR
CHARACTERISTIC
OHMIC VALUE
TOLERANCE
TERMINATION
PACKAGING
Note
(1) Preferred packaging code
Revision: 28-Sep-12
Document Number: 60031
85
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FC
www.vishay.com
Vishay Dale Thin Film
High Frequency (up to 20 GHz) Resistor,
Thin Film Surface Mount Chip
FEATURES
• Small standard size 0402 case size
• Edge trimmed block resistors
Available
• Alumina substrate high purity (99.6 %)
Available
• Ohmic range (10  to 1000 )
• Small internal reactance (< 10 m)
Available
• Low TCR (down to ± 25 ppm/°C)
• Epoxy bondable termination available
Available
• Material categorization: For definitions of
compliance please see www.vishay.com/doc?99912
FC series chip resistors are designed with low internal
reactance. They function as almost pure resistors on a very
high range of frequencies. The specialized laser edge
trimming allows for precision tolerances to 0.1 %.
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
APPLICATIONS
• Low noise amplifiers
• Attenuation
• Line termination
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Resistance Range
TCR: Absolute
Tolerance: Absolute
Stability: Absolute
SPECIFICATIONS
CONDITIONS
Passivated nichrome
-
10  to 1000 
Case size dependent
± 25 ppm/°C to ± 100 ppm/°C
- 55 °C to + 125 °C
± 0.1 % to ± 5.0 %
+ 25 °C
R ± 0.02 %
2000 h at 70 °C
-
-
0.1 ppm/V
-
Stability: Ratio
Voltage Coefficient
Working Voltage
30 V to 75 V
-
Operating Temperature Range
- 55 °C to + 125 °C
-
Storage Temperature Range
- 55 °C to + 150 °C
-
Noise
Shelf Life Stability: Absolute
< - 35 dB
-
R ± 0.01 %
1 year at + 25 °C
COMPONENT RATINGS
CASE SIZE
POWER RATING (mW)
WORKING VOLTAGE (V)
RESISTANCE RANGE ()
0402
50
30
10 to 1000
0505
125
37
20 to 1000
0603
125
50
10 to 1000
0805
200
50
10 to 1000
1005
250
75
10 to 1000
1206
330
75
10 to 1000
Revision: 27-Sep-13
Document Number: 60093
86
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FC
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches (millimeters)
D
CASE
SIZE
LENGTH
0402
0.042 ± 0.008
(1.067 ± 0.203)
0.022
(0.559)
0505
0.055 ± 0.006
(1.397 ± 0.152)
0603
T
TOP PAD
D (± 0.005)
BOTTOM PAD
E (± 0.005)
0.015
(0.381)
0.010
(0.254)
0.010
(0.254)
0.050
(1.270)
0.015
(0.381)
0.010
(0.254)
0.015
(0.381)
0.064 ± 0.006
(1.626 ± 0.152)
0.032
(0.813)
0.015
(0.381)
0.012
(0.305)
0.015
(0.381)
0805
0.080 ± 0.006
(2.032 ± 0.152)
0.050
(1.270)
0.015
(0.381)
0.016 ± 0.008
(0.406 ± 0.203)
0.015
(0.381)
1005
0.105 ± 0.008
(2.667 ± 0.203)
0.050
(1.270)
0.015
(0.381)
0.015
(0.381)
0.015
(0.381)
1206
0.126 ± 0.008
(3.200 ± 0.203)
0.063
(1.600)
0.015
(0.381)
E
L
D
T
W
L
WIDTH
THICKNESS
W (± 0.005)
TYPICAL
0.020 + 0.005/- 0.010
(0.508 + 0.127/- 0.254)
MECHANICAL SPECIFICATIONS
Resistive Element
Passivated nichrome
Substrate Material
Alumina
Terminations
Pre-soldered or gold
Lead (Pb)-free Option
96.5 % Sn, 3.0 % Ag, 0.5 % Cu
Tin/Lead Option
Sn63
Lead (Pb)-free Finish and Tin/Lead
Hot solder dip
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: FC1206E1001BBTS
F
C
1
2
0
6
E
1
0
0
1
B
F
C
1
2
0
6
K
1
0
0
0
B
GLOBAL
MODEL
CASE
SIZE
TCR
CHARACTERISTIC
FC
0402
0505
0603
0805
1005
1206
E = 25 ppm/°C
H = 50 ppm/°C
K = 100 ppm/°C
RESISTANCE
TOLERANCE
The first 3 digits
are significant
figures and the last
digit specifies the
number of zeros to
follow. “R”
designates the
decimal point.
B = 0.1 %
D = 0.5 %
F=1%
G=2%
J=5%
Example:
10R0 = 10 
1000 = 100 
1001 = 1 k
B
T
B
S
TERMINATION
(1, 2 or 3 digits)
T
S
T
S
PACKAGING
T = Top sided Au (gold) term
Au over Ni epoxy bondable
RoHS compliant - e4
B = Wraparound Sn/Pb solder
63 % Sn/37 % Pb w/nickel
barrier
G = Wraparound Au over Ni (gold)
termination epoxy bondable
RoHS compliant - e4
TB = Top sided Sn/Pb solder
63 % Sn/37 % Pb w/nickel
barrier
TBS = Top sided lead (Pb)-free
solder w/nickel barrier
RoHS compliant - e1
S = Wraparound
lead (Pb)-free solder
96.5 % Sn/3.0 % Ag/0.5 %Cu
RoHS compliant - e1
BS = BULK
100 min., 1 mult
WS = WAFFLE
100 min., 1 mult
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult (1)
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel
TS = 100 min., 1 mult
Historical Part Number example: FC1206E1001BBT (for reference purposes only)
FC
SERIES
1206
E
1001
B
B
T
CASE SIZE
TCR
CHARACTERISTIC
RESISTANCE
TOLERANCE
TERMINATION
PACKAGING
Note
(1) Preferred packaging code
Revision: 27-Sep-13
Document Number: 60093
87
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FC
www.vishay.com
Vishay Dale Thin Film
TYPICAL HIGH FREQUENCY PERFORMANCE ELECTRICAL MODEL AND TESTING
C: Internal shunt capacitance
L : Internal inductance
R: Resistance
LC: External connection inductance
Cg: External capacitance to ground
C
LC
R
L
LC
Cg
Cg
Lumped Equivalent Circuit
Reference plane is at the resistor-bonding pad interface.
The lumped circuit above was used to model the data at the bonding pad-resistor reference plane. High frequency testing was
performed by Modelithics, Inc. on parts mounted to quartz test boards. Quartz test boards were chosen to minimize the
contribution of the board effects at high frequencies.
INTERNAL IMPEDANCE
0603 Flip chip
0402 Flip chip
1.8
1.6
1.8
C = 0.0262 pF
L = 0.00189 nH
50 Ω
1.6
1.4
1.4
1.2
75 Ω
1.0
0.8
100 Ω
0.6
50 Ω
1.2
|Zin|/R
|Zin|/R
C = 0.0403 pF
L = 0.0267 nH
1.0
100 Ω
0.8
0.6
0.4
0.2
1000 Ω
0.0
0.1
1
10
250 Ω
0.4
500 Ω
0.2
Frequency (GHz)
0.0
0.1
250 Ω
1000 Ω
1
10
500 Ω
Frequency (GHz)
0402 Wraparound
1.8
1.6
50 Ω
C = 0.0392 pF
L = 0.1209 nH
75 Ω
1.4
|Zin|/R
1.2
1.0
0.8
100 Ω
0.6
0.4
0.2
1000 Ω
0.0
0.1
Revision: 27-Sep-13
1
10
500 Ω
Frequency (GHz)
Document Number: 60093
88
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FC
www.vishay.com
Vishay Dale Thin Film
VSWR FC Series 0402 size 50 Ω
2.0
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1.0
1
2
3
4
5
6
7
8 9 10 11 12 13 14 15 16 17 18 19 20
Frequency (GHz)
VSWR FC Series 0402 size 100 Ω
2.0
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1.0
1
Revision: 27-Sep-13
2
3
4
5
6
7
8 9 10 11 12 13 14 15 16 17 18 19 20
Frequency (GHz)
Document Number: 60093
89
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PNM
www.vishay.com
Vishay Dale Thin Film
Precision Thin Film Non-Magnetic Resistor,
Surface Mount Chip, ± 25 ppm/°C, Tolerances to 0.1 %
FEATURES
Actual Size
1505
These devices eliminate materials that would disturb
magnetic fields applications such as in MRI magnetic
resonance imaging machines. The PNM series chip resistor
has been carefully engineered with non-magnetic materials
to eliminate the effects of these stray magnetic fields on
circuit performance, thereby resulting in simplified shielding
requirements and improved sound quality in audio
applications. Providing signal conditioning without
distortion from magnetic fields.
CONSTRUCTION
Passivation
Tantalum Nitride
Resistive Film
Solder
coating
Barrier layer
High Purity
Alumina Substrate
Adhesion layer
•
•
•
•
•
•
•
•
•
•
•
•
Non-magnetic
Moisture resistant
Available
High purity alumina substrate
Non-standard values available
Available
MIL-STD-202 method 106 moisture
resistance with 10 % power
Available
100 % visual inspected per MIL-PRF-55342
Very low noise and voltage coefficient (< - 30 dB)
Non-inductive
Laser-trimmed tolerances to ± 0.1 %
Wraparound resistance less than 10 m
Sulfur resistant (per ASTM B809-95 humid vapor test)n
Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
TYPICAL PERFORMANCE
ABSOLUTE
TCR
25
TOL.
0.1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Resistance Range
TCR: Absolute
Tolerance: Absolute
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Shelf Life Stability: Absolute
SPECIFICATIONS
Tantalum nitride
10  to 3 M
± 25 ppm/°C to ± 100 ppm/°C
± 0.1 % to ± 1.0 %
R ± 0.03 %
0.1 ppm/V
75 V to 200 V
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 30 dB
-
CONDITIONS
- 55 °C to + 125 °C
+ 25 °C
-
COMPONENT RATINGS
CASE SIZE (1)
POWER RATING (mW)
0402
50
0502
100
0505
150
0603
150
0805
200
0705
200
1005
250
1010
500
1206
400
1505
400
2208
750
2010
800
2512
1000
Note
(1) 0705 and 0805 are the same (only use 0805 when ordering)
Revision: 17-Apr-13
WORKING VOLTAGE (V)
75
75
75
75
100
100
100
150
200
150
150
200
200
RESISTANCE RANGE ()
20 to 35K
20 to 65K
20 to 130K
10 to 130K
10 to 301K
10 to 301K
10 to 301K
50 to 600K
10 to 1M
10 to 1M
10 to 1.75M
10 to 2M
10 to 3M
Document Number: 60057
90
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PNM
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches
D
W
T
E
L
CASE SIZE
L
W
T
D
E
0402
0.042 ± 0.008
0.022 ± 0.005
0.012 to 0.033
0.010 ± 0.005
0.010 ± 0.005
0502
0.055 ± 0.006
0.025 ± 0.005
0.012 to 0.033
0.010 ± 0.005
0.015 ± 0.005
0505
0.055 ± 0.006
0.050 ± 0.005
0.012 to 0.033
0.010 ± 0.005
0.015 ± 0.005
0603
0.064 ± 0.006
0.032 ± 0.005
0.020 Max.
0.012 ± 0.005
0.015 ± 0.005
0705, 0805 (1)
0.080 ± 0.006
0.050 ± 0.005
0.015 to 0.033
0.015 ± 0.005
0.015 ± 0.005
1005
0.105 ± 0.007
0.050 ± 0.005
0.015 to 0.033
0.015 ± 0.005
0.015 ± 0.005
1010
0.105 ± 0.007
0.100 ± 0.005
0.015 to 0.033
0.015 ± 0.005
0.015 ± 0.005
1206
0.126 ± 0.008
0.063 ± 0.005
0.015 to 0.033
0.020 + 0.005/- 0.010
0.020 + 0.005/- 0.010
1505
0.155 ± 0.007
0.050 ± 0.005
0.015 to 0.033
0.015 ± 0.005
0.015 ± 0.005
2010
0.209 ± 0.009
0.098 ± 0.005
0.015 to 0.033
0.020 ± 0.005
0.020 ± 0.005
2208
0.230 ± 0.007
0.075 ± 0.005
0.015 to 0.033
0.020 ± 0.005
0.020 ± 0.005
2512
0.259 ± 0.009
0.124 ± 0.005
0.015 to 0.033
0.020 ± 0.005
0.020 ± 0.005
Note
(1) 0705 and 0805 are the same (only use 0805 when ordering)
ENVIRONMENTAL TESTS (Vishay Performance vs. MIL-PRF-55342 Requirements)
LIMITS MIL-PRF-55342
CHARACTERISTIC “H”
TYPICAL VISHAY
PERFORMANCE
± 50 ppm/°C
± 35 ppm/°C
Max. Ambient Temperature at Rated Wattage
+ 70 °C
+ 70 °C
Max. Ambient Temperature at Power Derating
+ 150 °C
+ 150 °C
ENVIRONMENTAL TEST
Resistance Temperature Characteristic
Thermal Shock
R
± 0.25 %
± 0.040 %
Low Temperature Operation
R
± 0.25 %
± 0.005 %
Short Time Overload
R
± 0.10 %
± 0.010 %
High Temperature Exposure
R
± 0.20 %
± 0.150 %
Resistance to Bonding Exposure
R
± 0.25 %
± 0.005 %
Moisture Resistance
R
± 0.40 %
± 0.029 %
Life + 70 °C at 1000 hours
R
± 0.50 %
± 0.03 %
10 000  minimum
> 100 000 M
Insulation Resistance
Revision: 17-Apr-13
Document Number: 60057
91
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PNM
www.vishay.com
Vishay Dale Thin Film
FILM LOAD LIFE STABILITY (at + 125 °C)
DERATING CURVE
0.1 %
Percent of Rated Power
100
0.06 %
0.05 %
0.04 %
0.03 %
0.02 %
Maximum
Absolute
Change
0.01 %
0.006 %
0.005 %
0.004 %
0.003 %
0.002 %
80
60
40
20
0.001 %
200
400
600
0
800 1000 1200 1400 1600 1800 2000
0
70
125
150
Ambient Temperature °C
Time in h at + 125 °C
GLOBAL PART NUMBER INFORMATION
P
N
GLOBAL
MODEL
PNM
Nonmagnetic
resistor
M
CASE
SIZE
0402
0502
0505
0603
0805
1005
1010
1206
1505
2208
2010
2512
1
2
TCR
CHARACTERISTIC
E = 25 ppm
(R > 100 )
H = 50 ppm
(R > 50 )
K = 100 ppm
(R > 10 )
0
6
E
1
0
0
2
B
RESISTANCE
TOLERANCE
TERMINATION
The first 3 digits are
significant
figures
and the last digit
specifies the number
of zeros to follow.
“R” designates the
decimal point.
B = ± 0.1 % (1)
B = Wraparound
Sn/Pb solder
63 % Sn/ 37 % Pb
S = Wraparound
lead (Pb)-free solder
96.5 % Sn/3.0 % Ag/
0.5 % Cu
RoHS compliant - e1
Example:
10R0 = 10 
1000 = 100 
1001 = 1 k
D = ± 0.5 %
F=±1%
G=±2%
J=±5%
B
T
1
PACKAGING
BS = BULK
100 min., 1 mult
WS = WAFFLE
100 min., 1 mult
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult (2)
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel
TS = 100 min., 1 mult
Notes
(1) B = 0.1 % tolerance available only above 100 .
(2) Preferred packaging code.
Revision: 17-Apr-13
Document Number: 60057
92
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PLT
www.vishay.com
Vishay Dale Thin Film
Precision Low TCR Thin Film Resistor, Surface Mount Chip,
± 5 ppm/°C TCR, 0.01 % Tolerance
FEATURES
• TCR of ± 5 ppm/°C standard
• Tolerances to ± 0.01 %
Available
• Anti corrosion resistant film with (SPM) special
passivation method
Available
• Stable film and performance characteristics
(R ± 0.04 % at 70 °C, 10 000 h)
• Non-standard resistance values available
• Very low noise and voltage coefficient
(< - 30 dB, 0.1 ppm/V)
• UL 94 V-0 flame resistant
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Actual Size 0603
Vishay’s proven precision thin film wraparound resistors will
meet your exact requirements. These resistors are ideal for
precision applications requiring low noise, stability, ultra low
temperature coefficient of resistance, and low voltage
coefficient. The chip resistors are available in any resistance
ohmic value in the range specified below.
Note
* Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
CONSTRUCTION
SPM Passivation
Enhancement
TYPICAL PERFORMANCE
Passivated Nichrome
Resistive Film
Solder
Coating
ABSOLUTE
Nickel Barrier
High Purity
Alumina Substrate
Adhesion Layer
TCR
5
TOL.
0.01
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Resistance Range
SPECIFICATIONS
CONDITIONS
Passivated nichrome
-
250  to 775 k
-
± 5 ppm/°C
- 55 °C to + 125 °C
TCR: Absolute
Tolerance: Absolute
Stability: Absolute
± 0.1 % to ± 0.01 %
+ 25 °C
R ± 0.02 %
2000 h at 70 °C
-
-
Stability: Ratio
Voltage Coefficient
Working Voltage
± 0.1 ppm/V (typical)
-
75 V to 200 V
-
Operating Temperature Range
- 55 °C to + 125 °C
-
Storage Temperature Range
- 55 °C to + 150 °C
-
< - 35 dB (typical)
-
R ± 0.01 %
1 year at + 25 °C
Noise
Shelf Life Stability: Absolute
COMPONENT RATINGS
CASE SIZE
POWER RATING (mW)
WORKING VOLTAGE (V)
RESISTANCE RANGE ()
0603
150
75
250 to 130K
0805
250
100
250 to 260K
1206
400
200
250 to 775K
Revision: 25-Feb-13
Document Number: 60030
93
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PLT
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches
D
W
T
E
L
CASE SIZE
TERM
L
W
T
D
E
0603
B
0.064 ± 0.006
0805
B
0.080 ± 0.006
0.032 ± 0.005
0.020 max.
0.012 ± 0.005
0.015 ± 0.005
0.050 ± 0.005
0.015 to 0.033
0.016 ± 0.008
0.015 ± 0.005
1206
B
0.126 ± 0.008
0.063 ± 0.005
0.015 to 0.033
0.020 + 0.005/- 0.010
0.020 + 0.005/- 0.010
ENVIRONMENTAL TESTS - TYPICAL
DERATING CURVE
100 k R ±
(%)
Thermal Shock
0.02
0.02
Short Time Overload
0.01
0.01
Low Temperature Operation
0.01
0.01
Resistance to Solder Heat
0.01
0.01
Moisture Resistance
0.02
0.02
High Temperature Exposure
0.02
0.02
Load Life (10 000 h, + 70 °C)
0.04
0.04
± 5 ppm/°C
± 5 ppm/°C
ENVIRONMENTAL TEST
TCR
100
Precent of Rated Power
10 k R ±
(%)
80
60
40
20
0
0
70
125
150
Ambient Temperature °C
GLOBAL PART NUMBER INFORMATION
P
L
T
0
6
GLOBAL
MODEL
CASE
SIZE
TCR
CHARACTERISTIC
PLT
0603
0805
1206
Z = ± 5 ppm/°C
0
3
Z
1
RESISTANCE
TOLERANCE
The first 3 digits are
significant figures and
the last digit specifies
the number of zeros to
follow. “R” designates
the decimal point.
L=
± 0.01 % (2)
Q = ± 0.02 %
A = ± 0.05 %
B = ± 0.1 %
Example:
1001 = 1 k
2500 = 250 
0
0
1
TERMINATION
Q
B
T
1
PACKAGING
B = Wraparound Sn/Pb
WS = WAFFLE PACK
solder w/Ni barrier
(63 % Sn/37 % Pb w/ TAPE AND REEL
nickel barrier)
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult (1)
S = Wraparound
T3 = 300 min., 300 mult
lead (Pb)-free solder
T5 = 500 min., 500 mult
96.5 % Sn/3.0 % Ag/ TF = Full reel
0.5 % Cu
TS = 100 min., 1 mult
RoHS compliant - e1
Special values with more
than 4 significant figures,
use a R for value below
1 k and a K for values
greater than 1 k to
signify a decimal point.
982R6 = 982.6 
532R41 = 532.41 
Notes
(1) Preferred packaging code
(2) L = ± 0.01 % tolerance available only for resistance value greater than 250 
Revision: 25-Feb-13
Document Number: 60030
94
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PLTT
www.vishay.com
Vishay Dale Thin Film
Precision Low TCR High Temperature Thin Film Resistor,
Surface Mount Chip, ± 5 ppm/°C TCR, 0.02 % Tolerance
FEATURES
•
•
•
•
•
•
Vishay’s proven precision thin film wraparound resistors will
meet your exact requirements. These resistors are ideal for
use in oil industry precision applications requiring low noise,
long term stability under high temperature, ultra low
temperature coefficient of resistance, and low voltage
coefficient. The chip resistors are available in any resistance
ohmic value in the range specified below.
•
•
•
•
•
CONSTRUCTION
SPM Passivation
Enhancement
- 55 °C to 215 °C operating temperature range
TCR of ± 5 ppm/°C standard
Available
Tolerances to ± 0.02 %
Anti corrosion resistant film with (SPM) special
Available
passivation method
Stable film and performance characteristics
0.5 % max. at 2000 h, 215 °C, 25 % rated
power
Non-standard resistance values available
Very low noise and voltage coefficient
(< - 30 dB, 0.1 ppm/V)
UL 94 V-0 flame resistant
Gold terminations (10 μ" to 20 μ")
Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
* Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
Passivated Nichrome
Resistive Film
Plated
Gold (10 μ" to 20 μ")
TYPICAL PERFORMANCE
Nickel Barrier
ABSOLUTE
High Purity
Alumina Substrate
Adhesion Layer
TCR
5
TOL.
0.02
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
SPECIFICATIONS
CONDITIONS
Passivated nichrome
-
Resistance Range
TCR: Absolute
Tolerance: Absolute
-
± 5 ppm/°C
- 55 °C to + 125 °C
± 0.1 % to ± 0.02 %
+ 25 °C
R ± 0.5 %
2000 h at 215 °C, 25 % rated power
-
-
Stability: Absolute
Stability: Ratio
Voltage Coefficient
250  to 3 M
± 0.1 ppm/V (typical)
-
100 V to 200 V
-
Operating Temperature Range
- 55 °C to + 215 °C
-
Storage Temperature Range
- 55 °C to + 215 °C
-
Working Voltage
Noise
Shelf Life Stability: Absolute
< - 35 dB (typical)
-
R ± 0.01 %
1 year at + 25 °C
COMPONENT RATINGS
POWER RATING
(mW)
WORKING VOLTAGE
(V)
RESISTANCE RANGE
()
0805
250 at 70 °C
100
250 to 260K
1206
400 at 70 °C
200
500 to 775K
2010
800 at 70 °C
200
500 to 2M
2512
1000 at 70 °C
200
500 to 3M
CASE SIZE
Note
• Consult factory for additional case size
Revision: 23-Oct-12
Document Number: 60082
95
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PLTT
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches
D
W
T
E
L
TERM
L
W
T
D
E
0805
G
0.080 ± 0.006
0.050 ± 0.005
0.015 to 0.033
0.016 ± 0.008
0.015 ± 0.005
1206
G
0.126 ± 0.008
0.063 ± 0.005
0.015 to 0.033
0.020 + 0.005/- 0.010
0.020 + 0.005/- 0.010
2010
G
0.209 ± 0.009
0.098 ± 0.005
0.015 to 0.033
0.020 ± 0.005
0.020 ± 0.005
2512
G
0.259 ± 0.009
0.124 ± 0.005
0.015 to 0.033
0.020 ± 0.005
0.020 ± 0.005
ENVIRONMENTAL TESTS - TYPICAL
DERATING CURVE
10 k R ±
(%)
100 k R ±
(%)
Thermal Shock
0.02
0.02
Short Time Overload
0.01
0.01
Low Temperature Operation
0.01
0.01
Resistance to Solder Heat
0.01
0.01
Moisture Resistance
0.02
0.02
High Temperature Exposure
0.02
0.02
Load Life (25 % Power,
2000 h, + 215 °C)
0.5
0.5
± 5 ppm/°C
± 5 ppm/°C
ENVIRONMENTAL TEST
TCR
75
50
25
0
0
0.50
0.40
0.40
0.30
0.30
0.10
0.00
- 0.10
Test Conditions:
Case Size: 0805
Resistance Value: 500 Ω
Applied Power: 25 % of rated power
Test Chamber Temperature: 215 °C
- 0.20
- 0.30
- 0.40
- 0.50
125 250 425 500 750 1000 1100 1250 1525 1775 2000
Time on Test (h)
230
0.20
0.10
0.00
- 0.10
Test Conditions:
Case Size: 0805
Resistance Value: 50 kΩ
Applied Power: 25 % of rated power
Test Chamber Temperature: 215 °C
- 0.20
- 0.30
- 0.40
- 0.50
0
215
PLTT0805 50 k STABILITY TEST RESULTS
0.50
0.20
70
Ambient Temperature °C
Maximum Δ (%)
Maximum Δ (%)
PLTT0805 500  STABILITY TEST RESULTS
100
Percent of Rated Power
CASE SIZE
0
125 250 425 500 750 1000 1100 1250 1525 1775 2000
Time on Test (h)
Note
• Performance obtained with following mounting conditions
PCB: Polymide IPC-7831A STD land patterns
Solder paste: PbSnAg (93.5/5/1.5)
Revision: 23-Oct-12
Document Number: 60082
96
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PLTT
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
P
L
T
T
0
GLOBAL
MODEL
CASE
SIZE
TCR
CHARACTERISTIC
PLTT
0805
1206
2010
2512
Z = ± 5 ppm/°C
8
0
5
Z
1
0
0
1
Q
G
T
1
RESISTANCE
TOLERANCE
TERMINATION
PACKAGING
The first 3 digits are
significant figures and
the last digit specifies
the number of zeros to
follow. “R” designates
the decimal point.
Q = ± 0.02 %
A = ± 0.05 %
B = ± 0.1 %
D = ± 0.5 %
F=±1%
G=±2%
G = Wraparound Gold
over Ni barrier
(10 μ" min. Au)
WS = WAFFLE
WI = 100 min./1mult
(item single lot date code)
WP = 100 min./1mult
(package unit single lot
date code)
Example:
1001 = 1 k
2500 = 250 
Special values with more
than 4 significant figures,
use a R for value below
1 k and a K for values
greater than 1 k to
signify a decimal point.
TAPE AND REEL
T1 = 1000 min., 1000 mult
T5 = 500 min., 500 mult
TF = Full reel
TS = 100 min., 1 mult
TI = 100 min./1mult
(item single lot date code)
TP = 100 min., 1 mult
(package unit single lot
date code)
982R6 = 982.6 
532R41 = 532.41 
Revision: 23-Oct-12
Document Number: 60082
97
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PAT
www.vishay.com
Vishay Dale Thin Film
Precision Automotive Thin Film Chip Resistors,
AEC-Q200 Qualified, 2 kV ESD Rating
FEATURES
•
•
•
•
•
•
These chip resistors are available in wraparound
terminations styles in 8 case sizes. They incorporate self
passivated enhanced tantalum nitride resistor film to give
superior performance on moisture resistance, electrostatic
discharge, voltage coefficient, power handling and
resistance stability. The terminations consist of an adhesion
layer, a leach resistant nickel barrier, and solder coating
(lead (Pb)-free). This product will out-perform all
requirements of AEC-Q200.
•
•
•
•
•
•
CONSTRUCTION
Passivation
Resistance range: 10  to 3 M
AEC-Q200 qualified
AEC-Q200 ESD rated class 1C (2 kV)
Laser trimmed to any value
Moisture resistant to MIL-STD-202, method 202
Tantalum nitride resistor film on high purity
alumina substrate
100 % visual inspected per MIL-PRF-55342
Laser-trimmed tolerances to ± 0.1 %
Load life stability < 0.05 % at 1000 h at 70 °C
Very low noise and voltage coefficient
(< - 30 dB, < 0.1 ppm/V)
Sulfur resistant (per ASTM B809-95 humid vapor test)
Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL PERFORMANCE
Tantalum Nitride
Resistive Film
Solder
Coating
ABSOLUTE
Nickel Barrier
High Purity
Alumina Substrate
Adhesion Layer
TCR
25
TOL.
0.1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
SPECIFICATIONS
Tantalum nitride
10  to 3 M
-
± 25 ppm/°C to ± 100 ppm/°C
± 0.1 % to ± 1.0 %
± 0.05 %
Not applicable
Less than 0.1 ppm/V
75 V to 200 V
- 55 °C to + 150 °C
- 55 °C to + 150 °C
< - 30 dB
100 ppm
- 55 °C to + 125 °C
+ 25 °C
2000 h at 70 °C rated power
1 year at 25 °C
Resistance Range
TCR: Absolute
Tolerance: Absolute
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Shelf Life Stability: Absolute
CONDITIONS
-
COMPONENT RATINGS
CASE SIZE
POWER RATING (mW)
WORKING VOLTAGE (V)
RESISTANCE RANGE ()
0402
0603
50
150
75
75
20 to 35K
10 to 80K
0805
200
100
10 to 301K
1206
1505
2208
2010
2512
400
400
750
800
1000
200
150
150
200
200
10 to 1M
10 to 1M
10 to 1.75M
10 to 2M
10 to 3M
Revision: 25-Apr-12
Document Number: 60024
98
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PAT
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches
D
T
D
W
T
E
L
L
CASE SIZE
0402
0603
0805
1206
1505
2010
2208
2512
L
0.042 ± 0.008
0.064 ± 0.006
0.080 ± 0.006
0.126 ± 0.008
0.155 ± 0.007
0.209 ± 0.009
0.230 ± 0.007
0.259 ± 0.009
W
0.022 ± 0.005
0.032 ± 0.005
0.050 ± 0.005
0.063 ± 0.005
0.050 ± 0.005
0.098 ± 0.005
0.075 ± 0.005
0.124 ± 0.005
T
0.015 ± 0.003
0.015 ± 0.003
0.015 ± 0.003
0.015 ± 0.003
0.015 ± 0.003
0.015 ± 0.003
0.015 ± 0.003
0.015 ± 0.003
D
E
0.010 ± 0.005
0.010 ± 0.005
0.012 ± 0.005
0.015 ± 0.005
0.015 ± 0.005
0.015 ± 0.005
0.020 + 0.005, - 0.010 0.020 + 0.005, - 0.010
0.015 ± 0.005
0.015 ± 0.005
0.020 ± 0.005
0.020 ± 0.005
0.020 ± 0.005
0.020 ± 0.005
0.020 ± 0.005
0.020 ± 0.005
ENVIRONMENTAL TESTS (Vishay Performance vs. AEC-Q200 Requirements)
ENVIRONMENTAL TEST
LIMITS
TYPICAL VISHAY
PER AEC-Q200 PERFORMANCE
CONDITIONS
Resistance Temperature Characteristic
- 55 °C to + 125 °C
± 50 ppm/°C
± 35 ppm/°C
Max. Ambient Temp. at Rated Wattage
+ 70 °C
+ 70 °C
Max. Ambient Temp. at Power Derating
+ 150 °C
+ 150 °C
+ 0.016 %
High Temperature Storage
R
MIL-STD-202, 108, 1000 h at 125 °C
± 0.1 %
Temperature Cycling
R
JESD22, JA-104, 1000 cycles, - 55 °C to + 125 °C
± 0.15 %
+ 0.013 %
Moisture Resistance
R
MIL-STD-202, 106
± 0.20 %
+ 0.0010 %
Biased Humidity
R
MIL-STD-202, 103, 1000 h at 85 °C, 85 % RH, 10 % P
± 0.10 %
+ 0.004 %
Life
R
MIL-STD-202, 108 at 125 °C, 1000 h
± 0.1 %
+ 0.0220 %
Mechanical Shock
R
MIL-STD-202, method 213, condition C
± 0.1 %
+ 0.004 %
Vibration
R
MIL-STD-202 method 204, 10 Hz to 2 kHz
± 0.1 %
+ 0.0030 %
+ 0.0150 %
Resistance to Soldering Heat
R
MIL-STD-202, 204, condition B
± 0.10 %
Electrostatic Discharge
R
AEC-Q200-002 at 2 kV, human body
± 0.10 %
- 0.032 %
Visual
J-STD-002, method B and B1
95 %
Acceptable
Terminal Strength
R
AEC-Q200-006 at 1 kg for 60 s
± 0.10 %
+ 0.009 %
Flame Retardance
Visual
AEC-Q200-001 para 4.0
Solderability
Acceptable
DERATING CURVE
Percent of Rated Power
100
80
60
40
20
0
0
50
100
150
155
200
250
Ambient Temperature °C
Revision: 25-Apr-12
Document Number: 60024
99
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PAT
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: PAT1206E1002BST1
P
A
T
1
2
GLOBAL
MODEL
CASE
SIZE
TCR
CHARACTERISTIC
PAT
0402
0603
0805
1206
1505
2010
2208
2512
E = ± 25 ppm/°C
H = ± 50 ppm/°C
K = ± 100 ppm/°C
0
6
E
1
0
RESISTANCE
TOLERANCE
The first 3 digits are
significant figures and
the last digit specifies
the number of zeros
to follow. “R”
designates the
decimal point.
B = ± 0.1 %
D = ± 0.5 %
F = ± 1.0 %
G = ± 2.0 %
J = ± 5.0 %
0
2
TERMINATION
S = Wraparound
lead (Pb)-free
solder
w/nickel barrier
B
S
T
1
PACKAGING
TAPE AND REEL
T1 = 1000 min., 1000 mult (1)
TF = Full reel
TS = 100 min., 1 mult
Example:
10R0 = 10 
1000 = 100 
1002 = 10 k
Note
(1) Preferred packaging code
Revision: 25-Apr-12
Document Number: 60024
100
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PATT
www.vishay.com
Vishay Dale Thin Film
Precision Automotive High Temperature (155 °C at full
rated power) Thin Film Chip Resistor, AEC-Q200 Qualified
FEATURES
•
•
•
•
•
•
The terminations consist of an adhesion layer, a leach
resistant nickel barrier and gold plating compatible with high
temperature solder systems.
• Tantalum nitride resistor film on alumina
substrate
• 100 % visual inspected per MIL-PRF-55342
• Laser-trimmed tolerances to ± 0.1 %
• Load life stability 0.2 % at 1000 h at 155 °C and 100 %
rated power
• Very low noise and voltage coefficient
(< - 30 dB, < 0.1 ppm/V)
• Sulfur resistant (per ASTM B809-95 humid vapor test)
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
CONSTRUCTION
Passivation
Resistance range: 2.75  to 120 k
AEC-Q200 qualified, table 7F
AEC-Q200 qualified, ESD rated class 1C (2 kV)
Laser trimmed to any value
Intrinsic moisture protected resistor element
Moisture resistant to MIL-STD-202, method 106
Tantalum Nitride
Resistive Film
Gold
Nickel Barrier
High Purity
Alumina Substrate
Adhesion Layer
TYPICAL PERFORMANCE
ABSOLUTE
TCR
25
TOL.
0.1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
CONDITIONS
Material
Tantalum nitride
-
Resistance Range
2.75  to 120 k
-
± 25 ppm/°C to ± 100 ppm/°C
- 55 °C to + 175 °C
± 0.1 % to ± 1.0 %
+ 25 °C
± 0.05 %
0.2 % at 1000 h at 155 °C
and 100 % rated power
Not applicable
-
TCR: Absolute
Tolerance: Absolute
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Less than 0.1 ppm/V
-
75 V
-
Operating Temperature Range
- 55 °C to + 250 °C
-
Storage Temperature Range (1)
Working Voltage
- 55 °C to + 250 °C
-
Noise
< - 30 dB
-
Shelf Life Stability: Absolute
100 ppm
1 year at 25 °C
Note
(1) Storage temperature rating is for device only.
COMPONENT RATINGS
CASE SIZE
0603
Revision: 28-Aug-13
POWER RATING (mW)
WORKING VOLTAGE (V)
RESISTANCE RANGE ()
150
75
2.75 to 120K
Document Number: 60124
101
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PATT
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches
D
T
D
W
T
E
L
L
CASE SIZE
0603
L
W
T
D
E
0.064 ± 0.006
0.032 ± 0.005
0.015 ± 0.003
0.012 ± 0.005
0.015 ± 0.005
ENVIRONMENTAL TESTS
ENVIRONMENTAL TEST
CONDITIONS
TYPICAL VISHAY
PERFORMANCE
High temperature storage
MIL-STD-202 method 108, 1000 h at 125 °C
± 0.05 %
JESD22 method JA-104, 1000 cycles,
- 55 °C to + 125 °C
± 0.115 %
Temperature cycling
Moisture resistance
Biased humidity
MiIL-STD-202 method 106
± 0.017 %
MIL-STD-202 method 103, 1000 h at 85 °C, 85 % RH,
10 % rated power
± 0.133 %
MIL-STD-202 method 108,
1000 h at 155 °C
± 0.20 % at 100 %
rated power and 155 °C.
Effective film temperature is 200 °C.
MIL-STD-202 method 213, condition C
± 0.008 %
MIL-STD-202 method 204, 10 Hz to 2 kHz
± 0.008 %
Life
Mechanical shock
Vibration
Resistance to soldering heat
Electrostatic discharge
Solderability
MIL-STD-202 method 210, condition B
± 0.09 %
AEC-Q200-002 at 2 kV, human body
± 0.10 % at 2 kV
MIL-STD-883 method 2003 para 2.3.1 and J-STD-002
Pass
MIL-PRF-55342,0.5 kg for 30 s
Pass
AEC-Q200-001 para 4.0
Pass
Die shear
Flame retardance
MECHANICAL SPECIFICATIONS
Resistive element
Tantalum nitride
Substrate material
Alumina
Terminations
Gold (10 μin. min.) over nickel ( 50 μin. min.)
DERATING CURVE
Percent of Rated Power
100
80
60
40
20
0
- 55
0
50
100
155
200
250
Ambient Temperature °C
Revision: 28-Aug-13
Document Number: 60124
102
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PATT
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: PATT0603E1002BST1
P
A
T
T
0
GLOBAL
MODEL
CASE
SIZE
TCR
CHARACTERISTIC
PATT
0603
E = ± 25 ppm/°C
H = ± 50 ppm/°C
K = ± 100 ppm/°C (1)
L = ± 200 ppm/°C
6
0
3
E
1
RESISTANCE
TOLERANCE
The first 3 digits are
significant figures and
the last digit specifies
the number of zeros
to follow. “R”
designates the
decimal point.
B = ± 0.1 %
D = ± 0.5 %
F = ± 1.0 %
G = ± 2.0 %
J = ± 5.0 %
0
0
2
TERMINATION
G = Wraparound
gold over nickel
barrier
B
G
T
1
PACKAGING
TAPE AND REEL
T1 = 1000 min., 1000 mult (2)
TF = Full reel
TS = 100 min., 1 mult
Example:
10R0 = 10 
1000 = 100 
1002 = 10 k
Notes
(1) Characteristic TCR - (R < 10 )
(2) Preferred packaging code
RESISTANCE
TCR
(ppm/°C)
TOLERANCE
(%)
10  to 120 k
25, 50, 100, 200
0.1, 0.5, 1, 2, 5
5  to 10  (2)
100, 200
1, 2, 5
200
1, 2, 5
2.75  to 5  (2)
Note
(3) Resistance values from 2.75  to 10  are undergoing PPAP qualification; results are expected to be similar to PPAP qualified 10  to 120
k.
Revision: 28-Aug-13
Document Number: 60124
103
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PHP
www.vishay.com
Vishay Dale Thin Film
High Power Thin Film Wraparound Chip Resistor
FEATURES
•
•
•
•
•
•
High purity ceramic substrate
Power rating to 2.5 W
Resistance range 10  to 30.1 k
Resistor tolerance to ± 0.1 %
TCR to ± 25 ppm/°C
Flame resistant UL 94 V-0
APPLICATIONS
PHP series chip resistors are designed with enlarged
backside terminations to reduce the thermal resistance
between the topside resistor layer and the solder joint on the
end users circuit board.
Actual power handling capability is limited by the end user
mounting process. As with any high power chip resistor the
ability to remove the generated heat is critical to the overall
performance of the device.
•
•
•
•
•
Power supplies
Power switching
Braking system
Test and measurement equipment
Motor deflection circuits
TYPICAL PERFORMANCE
ABSOLUTE
TCR
25
TOL.
0.1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Resistance Range
TCR: Absolute
Tolerance: Absolute
Power Rating: Resistor
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Shelf Life Stability: Absolute
SPECIFICATIONS
Nichrome
10  to 30.1 k
25 ppm/°C, 50 ppm/°C (stdandard)
and, 100 ppm/°C
0.1 %, 0.5 %, 1.0 % and, 5.0 %
1206: 1.0 W, 2512: 2.5 W (1)
R 0.1 %
Not applicable
< 0.1 ppm/V
1206: 100 V, 2512: 200 V
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 30 dB
± 0.01 %
CONDITIONS
- 55 °C to + 125 °C
+ 25 °C
Maximum at + 70 °C
2000 h at + 70 °C
1 year at + 25 °C
COMPONENT RATINGS
CASE SIZE
POWER RATING (mW)
1206
1000 (1)
2512
2500 (1)
Note
(1) Dependent on component mounting by user
WORKING VOLTAGE (V)
100
200
RESISTANCE RANGE ()
10 to 30.1K
10 to 30.1K
ENVIRONMENTAL TESTS (Vishay Performance vs. MIL-PRF-55342 Requirements)
ENVIRONMENTAL TEST
Resistance Temperature Characteristic
Maximum Ambient Temperature at Rated Wattage
Maximum Ambient Temperature at Power Derating
Thermal Shock
Low Temperature Operation
Short Time Overload
High Temperature Exposure
Resistance to Soldering Heat
Moisture Resistance
Life at + 70 °C for 2000 h
Revision: 11-Jun-13
LIMITS MIL-PRF-55342
CHARACTERISTIC “E”
± 25 ppm/°C
+ 70 °C
+ 150 °C
± 0.1 %
± 0.1 %
± 0.1 %
± 0.1 %
± 0.2 %
± 0.2 %
± 0.5 %
TYPICAL VISHAY PERFORMANCE
± 15 ppm/°C
+ 70 °C
+ 150 °C
± 0.04 %
± 0.001 %
± 0.003 %
± 0.030 %
± 0.007 %
± 0.002 %
± 0.100 %
Document Number: 60076
104
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PHP
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches
D
W
T
E
L
CASE SIZE
WIDTH
W (± 0.005)
LENGTH
THICKNESS
MIN./MAX.
TOP PAD
D (± 0.005)
BOTTOM PAD
E (± 0.005)
1206
0.126 ± 0.008
0.063
0.015/0.033
0.020 + 0.005/- 0.010
0.040
2512
0.259 + 0.009/- 0.015
0.124
0.015/0.033
0.02
0.050
LAND PATTERN DIMENSIONS in inches
PHP Land Pattern for 1206 Case Size
PHP Land Pattern for 2512 Case Size
0.0710
0.1260
0.0755
0.0910
0.0220
0.1090
STANDARD MATERIAL SPECIFICATIONS
Resistive Element
Nichrome
Substrate Material
Alumina (Al2O3)
Terminations (Tin/Lead)
Tin/lead solder over nickel barrier
Terminations (Lead (Pb)-free)
Tin/silver/copper (Sn96.5Ag3.0Cu0.5) solder over nickel barrier
5.00
4.50
4.00
3.50
3.00
2.50
2.00
1.50
1.00
0.50
0.00
1206 - 100 Ω
1206 - 5 kΩ
1206 - 10 kΩ
70
PHP CHIP TEMP. VS. APPLIED POWER
Applied Power (W)
Applied Power (W)
PHP CHIP TEMP. VS. APPLIED POWER
150
10.00
9.00
8.00
7.00
6.00
5.00
4.00
3.00
2.00
1.00
0.00
200
70
Chip Surface Temperature (°C)
Notes
• Chip surface temperature measured using FLIR A40 thermal
imaging system with an approximate test card surface
temperature of 25 °C.
• Thermal imaging was conducted under ambient conditions
resulting in a steady state test card surface temperature of 85 °C
over the full range of power levels.
• Thermal imaging and load life testing was conducted mounting
one device to 2" x 3" test cards with 2.5 mil copper plating on
both surfaces. Thermal vias on 120 mil centers were utilized for
heat transfer between surfaces of the test card.
Revision: 11-Jun-13
2512 - 10 Ω
2512 - 10 kΩ
2512 - 30 kΩ
200
150
Chip Surface Temperature (°C)
Notes
• Chip surface temperature measured using FLIR A40 thermal
imaging system with an approximate test card surface
temperature of 25 °C.
Case Size
Resistance
Value
Temperature
2512
2512
2512
Up to 10 
Up to 10 k
Up to 30 k
70
2.44
1.81
1.87
150
6.82
4.89
5.19
200
9.33
6.63
7.09
Power (W)
Document Number: 60076
105
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PHP
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
P
H
P
GLOBAL
MODEL
SUBSTRATE
PHP
0 = Alumina
0
CASE
SIZE
1206
2512
1
2
0
6
1
0
0
2
TCR
RESISTANCE
TOLERANCE
TERMINATION
E=
± 25 ppm/°C
H=
± 50 ppm/°C
K=
± 100 ppm/°C
The first 3 digits
are significant
figures and the
last digit
specifies the
number of
zeros to follow.
“R” designates
the decimal
point.
B = ± 0.1 %
D = ± 0.5 %
F = ± 1.0 %
G = ± 2.0 %
J = ± 5.0 %
B = Wraparound
Sn/Pb solder
w/nickel barrier
Example:
10R0 = 10 
1000 = 100 
1001 = 1 k
Revision: 11-Jun-13
E
B
S = Wraparound
lead (Pb)-free solder
SAC-305
RoHS compliant - e1
B
T
1
PACKAGING
BS = BULK
100 min., 1 mult
WS = WAFFLE
100 min., 1 mult
WI = WAFFLE
(item single lot
day code)
100 min., 1 mult
TAPE AND REEL
T1 = 1000 min.,
1000 mult
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel
TS = 100 min., 1 mult
TI = 100 min., 1 mult
(item single lot
date code)
TP = 100 min., 1 mult
(package unit
single lot date)
Document Number: 60076
106
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Tape and Reel Specifications
www.vishay.com
Vishay Dale Thin Film
8 mm, 12 mm, 16 mm and 24 mm Embossed Conductive Tape
Conforming to EIA-481
Note
• Chip resistor quantities less than 1000 pieces are typically packaged in bulk or waffle packs unless specified at time of order entry.
8, 12, 16 AND 24 mm EMBOSSED TAPE DIMENSIONS
P0
K
D
T
DIAGRAMS
10 pitches cumulative
tolerance on tape
± 0.2 mm (± 0.008")
P2
Top cover
tape thickness (t1)
0.10 mm (0.004") Max.
E
A0
Top cover tape
See Note 1
Embossment
Embossed
carrier
W
B0
K0
B1
F
See Note 1
P1
For machine reference only
including draft and radii
concentric around B0
Center lines
of cavity
Embossment
User Direction of Feed
R Min.
D1
For components
2.0 mm x 1.2 mm
and larger
Bending radius
See Note 2
100 mm (3.937")
Maximum
20° component rotation
1 mm (0.039") Max.
Typical
component
cavity
center line
Tape
1 mm (0.039") Max.
250 mm (9.843")
Typical
component
center line
8, 12 , 16 AND 24 MM EMBOSSED TAPE DIMENSIONS in millimeters (inches)
Constant Dimensions
TAPE SIZE
8, 12
D
1.50 + 0.10/- 0.00
D1 (min.)
F
P1
4.55 (0.179)
see
requirements
1.00
(0.039)
3.50 ± 0.10
(0.138 ± 0.004)
8.20 (0.323)
1.50
(0.059)
5.50 ± 0.05
(0.217 ± 0.002)
2.0 ± 0.10
(0.079 ± 0.004)
see requirements
4.00 ± 0.10
(0.157 ± 0.004)
8.00 ± 0.10
(0.315 ± 0.004)
4.00 ± 0.10
(0.157 ± 0.004)
8.00 ± 0.10
(0.315 ± 0.004)
12.00 ± 0.10
(0.472 ± 0.004)
4.00 ± 0.10
(0.157 ± 0.004)
to 20.00 ± 0.10
(0.787 ± 0.004)
in 4.00 (0.157)
increments
12 mm
12 mm
Double Pitch
16 mm
7.50 ± 0.10
(0.295 ± 0.004)
12.10 (0.476)
1.50
(0.059)
24 mm
P0
4.00 ± 0.10
B1 (max.)
TAPE SIZE
8 mm
1/2 Pitch
8 mm
E
1.75 ± 0.10
20.10 (0.791)
11.50 ± 0.10
(0.453 ± 0.004)
T (max.)
0.40
A0 B0 K0
See note 1
P2
2.00 ± 0.05
R (min.)
see note 2
K
W
25 (0.984)
2.50 max.
(0.098)
8.00 (0.315)
30 (1.181)
6.50 max.
(0.256)
12.00 ± 0.30
see
(0.472 ± 0.012)
requirements
8.00 (0.315)
A0 B0 K0
See
note 1
16.30 (0.642)
See
note 1
30 (1.181)
12.00 (0.472)
24.30
(0.957)
Notes
(1) A0 B0 K0 are determined by component size. The clearance between the component and the cavity must be within 0.05 mm (0.002") min.,
to 0.50 mm (0.020") max. for 8 mm tape, and 0.05 mm (0.002") min. to 0.65 mm (0.026") max. for 12 mm tape. The component cannot rotate
more than 20° within the determined cavity, see above diagram.
(2) Tape and components shall pass around radius "R" without damage
Revision: 20-Jul-12
107
Document Number: 60034
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Tape and Reel Specifications
www.vishay.com
Vishay Dale Thin Film
VISHAY THIN FILM (NIAGARA FALLS) STANDARD TAPE AND REEL SPECIFICATIONS
CASE SIZE
OR STYLE
0402
0502
0603
0504
0505
0508 (1)
0612 (2)
0705/0805
1005
1010
1020
1206
1225 (3)
1505
2010
2208
2512
STYLE
DFN
ORN
HTRN
TOMC
MP
MPM
MPD
MPH
TLCC/LCC
TLCC/LCC
WOMC
NOMC
NOMCA
NOMC
NOMCA
OSOP
SILNET STYLE
VSOR
VSORC
VSOR2000S1
VSSR
VSSRC
VTSR
VTSRC
SIZE
TAPE SIZE
MAX. QTY./REEL
LEADER
LENGTH (MIN.)
CAVITY SIZE
REEL SIZE
40 x 20
50 x 25
63 x 32
50 x 40
50 x 50
50 x 75
63 x 126
75 x 50
100 x 50
100 x 100
100 x 200
126 x 63
125 x 250
150 x 50
200 x 100
225 x 75
250 x 125
TYPE
8 PAD 4 mm SQ.
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
12 mm
8 mm
12 mm
12 mm
12 mm
12 mm
12 mm
5000
5000
5000
5000
5000
5000
4000
5000
4000 (4)
4000
3000
4000
2000
4000
2000
2000
2000
400 mm
400 mm
400 mm
400 mm
400 mm
400 mm
400 mm
400 mm
400 mm
400 mm
400 mm
400 mm
400 mm
400 mm
400 mm
400 mm
400 mm
0.045 x 0.024
0.061 x 0.035
0.075 x 0.045
0.052 x 0.054
0.052 x 0.054
0.060 x 0.080
0.075 x 0.139
0.060 x 0.080
0.058 x 0.112
0.110 x 0.114
0.110 x 0.220
0.075 x 0.139
0.140 x 0.290
0.089 x 0.168
0.111 x 0.220
0.085 x 0.243
0.140 x 0.290
7"
7"
7"
7"
7"
7"
7"
7"
7"
7"
13"
7"
7"
7"
7"
7"
7"
12 mm
3000
400 mm
0.172 x 0.172
13"
8 PIN SOIC
12 mm
3000
400 mm
0.254 x 0.202
13"
16 PIN SOIC
SC70
SOT-23
SOT-143
4 PIN LCC
16 PIN LCC
20 PIN LCC
16/18/20 PIN
SOIC
24 mm
8 mm
8 mm
8 mm
12 mm
16 mm
16 mm
2000
4000
4000
4000
2500
2000
2000
400 mm
400 mm
400 mm
400 mm
400 mm
400 mm
400 mm
0.323 x 0.457
0.095 x 0.095
0.122 x 0.106
0.122 x 0.106
0.165 x 0.230
0.330 x 0.327
0.408 x 0.405
13"
7"
7"
7"
13"
13"
13"
24 mm
1000
400 mm
0.431 x 0.524
13"
14 PIN SOIC
16 mm
2500
400 mm
0.258 x 0.351
13"
16 PIN SOIC
16 mm
2500
400 mm
0.256 x 0.404
13"
20 PIN SSOP
TYPE
16 PIN SOIC
20 PIN SOIC
20 PIN SOIC
16 PIN QSOP
20 PIN QSOP
24 PIN QSOP
20 PIN QSOP
16 PIN TSSOP
20 PIN TSSOP
24 PIN TSSOP
20 PIN TSSOP
16 mm
2500
400 mm
0.258 x 0.315
13"
12 mm
24 mm
24 mm
12 mm
16 mm
16 mm
16 mm
24 mm
24 mm
24 mm
24 mm
2500
1000
1000
2500
2500
2500
2500
2500
2500
2500
2500
400 mm
400 mm
400 mm
400 mm
400 mm
400 mm
400 mm
400 mm
400 mm
400 mm
400 mm
0.252 x 0.205
0.429 x 0.524
0.429 x 0.524
0.252 x 0.205
0.256 x 0.374
0.256 x 0.374
0.256 x 0.374
0.252 x 0.205
0.256 x 0.374
0.256 x 0.374
0.256 x 0.374
13"
13"
13"
13"
13"
13"
13"
13"
13"
13"
13"
Notes
(1) Same tape as 0705/0805, part orientation will have termination on Bo side of pocket
(2) Same tape as 1206, part orientation will have termination on Bo side of pocket
(3) Same tape as 2512, part orientation will have termination on Bo side of pocket
(4) M-1005 series 5000 pieces max. per reel
Revision: 20-Jul-12
108
Document Number: 60034
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Waffle Pack Packaging
www.vishay.com
Vishay Dale Thin Film
VISHAY THIN FILM (NIAGARA FALLS) STANDARD WAFFLE PACK SPECIFIED (2 inch x 2 inch)
SIZE
OR STYLE
NUMBER
OF CELLS
0402
(40 x 20)
400
0502
(50 x 20)
400
0504
(50 x 40)
400
0505
(50 x 50)
400
0603
(60 x 30)
100
0705
(70 x 50)
100
1005
(100 x 50)
100
1010
(100 x 100)
100
1206
(126 x 63)
100
1505
(150 x 50)
90
2208
(225 x 75)
72
2010
(200 x 100)
49
2512
(250 x 125)
25
CASE SIZE
Revision: 21-Apr-05
Document Number: 60087
109
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Contents
CTSP..................................... 111
TSP ....................................... 114
VTF (Standard) ...................... 116
Through
Hole
Networks
Typical Resistor Network
Applications........................... 124
VTF (Custom)........................ 127
100-267 ................................. 130
TDP ....................................... 132
CS ......................................... 135
CSD....................................... 138
HD ......................................... 141
HVPS .................................... 144
M83401, C83401................... 146
CTSP
www.vishay.com
Vishay Dale Thin Film
Molded, Commercial, Single In-Line Thin Film Resistor,
Through Hole Network (Custom)
FEATURES
• Lead (Pb)-free gold plated terminals standard
• Gold to gold terminations (no internal solder)
• Exceptional ratio stability over time and
temperature (R ± 0.015 % 2000 h at 70 °C)
• Rugged low profile molded case 6 pins, 8 pins,
and 10 pins available
• Compatible with automatic insertion equipment
• Compliant to RoHS Directive 2002/95/EC
Designed to meet MIL-PRF-83401 characteristic “V” and “H”
Military grade networks designed to meet MIL-PRF-83401
characteristics “V” and “H” available in 6 pins, 8 pins and
10 pins sizes in high and low profile. The molded style
features a direct thermal compression bonded lead
attachment in a rugged molded construction.
Available
Available
Note
* Pb containing terminations are not RoHS compliant, exemptions
may apply
TYPICAL PERFORMANCE
TCR
TOL.
ABSOLUTE
TRACKING
10
2
ABSOLUTE
RATIO
0.05
0.025
SCHEMATIC
Custom schematics available.
Please consult factory.
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
Material
Pin/Lead Number
CONDITIONS
Passivated nichrome
-
6, 8, 10
-
20  to 500 k total
-
TCR: Absolute
± 10 ppm/°C to ± 25 ppm/°C
- 55 °C to + 125 °C
TCR: Tracking
± 2 ppm/°C (typical less 1 ppm/°C equal values)
- 55 °C to + 125 °C
Resistance Range
Tolerance: Absolute
± 0.05 % to ± 0.5 %
+ 25 °C
Tolerance: Ratio
± 0.025 % to 0.1 %
+ 25 °C
100 mW (per element typical at + 25 °C)
Maximum at + 70 °C
Power Rating: Resistor
Power Rating: Package
500 mW
Maximum at + 70 °C
Stability: Absolute
R ± 0.05 %
2000 h at + 70 °C
Stability: Ratio
R ± 0.015 %
2000 h at + 70 °C
< 0.0015 ppm/V
-
100 V
-
Operating Temperature Range
- 55 °C to + 125 °C
-
Storage Temperature Range
- 55 °C to + 150 °C
-
< - 30 dB
-
Voltage Coefficient
Working Voltage
Noise
Thermal EMF
< 0.08 μV/°C
-
Shelf Life Stability: Absolute
R ± 0.01 %
1 year at + 25 °C
Shelf Life Stability: Ratio
R ± 0.002 %
1 year at + 25 °C
Note
• Tantalum Nitride film is custom, consult factory
Revision: 01-Sep-11
Document Number: 60036
111
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CTSP
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in inches and millimeters
Part
Number
L
Indicates
Pin 1
Date
Code
Vishay
Logo
DIMENSION
INCHES
MILLIMETERS
A
0.035
0.89
B
0.040
1.02
C
0.100 ± 0.005 non-accum.
2.54 ± 0.13
D
0.019 ± 0.006 typical
0.48 ± 0.15
E
0.187 ± 0.010
4.75 ± 0.25
F
0.135
3.43
G
0.095
2.41
H
0.012 ± 0.004
0.31 ± 0.10
L (6 Pins)
0.583 ± 0.015
14.81 ± 0.38
L (8 Pins)
0.783 ± 0.015
19.89 ± 0.38
L (10 Pins)
0.983 ± 0.015
24.97 ± 0.38
G
E
A
F
B
H
C
D
MECHANICAL SPECIFICATIONS
Resistive Element
Passivated nichrome or tantalum nitride
Substrate Material
Alumina
Body Molded
Epoxy
Terminals
Copper alloy
Plating
Nickel/gold
Model TSP - Lead (Pb)-free Standard
Gold plated
Model TSPS - Lead (Pb)-free Solder Coated Option
Model TSPL - Tin/Lead Solder Coated Option
Sn63
Sn96.5, Ag3.0, Cu0.5
Tin/Lead and Lead (Pb)-free Finish
Hot solder dip
ORDERING INFORMATION CHECK LIST (Customs)
Special requirements should be identified in advance, but as a minimum, you should have the following information ready.
ELECTRICAL
1. Resistors, by value and tolerance
2. Reference resistor(s) and matching of which resistors to which
reference resistors
3. Resistance by ratio
4. Absolute temperature coefficient of resistivity
5. Temperature tracking of subordinate resistors to reference
resistor(s)
6. Maximum operating voltage
7. Resistor power ratings
8. Operating temperature range
MECHANICAL
1. Maximum allowable seated height (from PC board to top of
network)
2. Special marking concerns
3. Schematic pin out of package
4. Specify if solder coated terminals are required
For additional assistance refer to Vishay Thin Film’s guide to understanding Thin Film precision.
Resistor networks or application engineering.
All standard products may be ordered directly from Vishay Thin Film.
Revision: 01-Sep-11
Document Number: 60036
112
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CTSP
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: TSP1xx-xxxUF
T
S
P
1
x
x
-
x
x
x
U
F
T
S
P
L
1
x
x
-
x
x
x
U
F
T
S
P
S
x
x
-
x
x
x
-
U
F
GLOBAL MODEL
(3 or 4 digits)
TSP
(Lead (Pb)-free)
(e4)
1
CUSTOM PART NUMBER
(7 to 12 digits)
1xx-xxx
1xx-xxx-xxxx
x
PACKAGING
UF = TUBED
TSPL
(Tin Lead)
TSPS
(Lead (Pb)-free)
(e1)
Historical Part Number example: 1xx-xxx (for reference purposes only)
1xx-xxx
CUSTOM PART NUMBER
Revision: 01-Sep-11
Document Number: 60036
113
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TSP
www.vishay.com
Vishay Dale Thin Film
Molded, Commercial, Single In-Line Thin Film Resistor,
Through Hole Network (Standard)
FEATURES
• Lead (Pb)-free gold plated terminals standard
• Gold to gold terminations (no internal solder)
Actual Size
Available
• Exceptional ratio stability over time and
temperature (R ± 0.015 % 2000 h at 70 °C)
Available
• Rugged low profile molded case 6 pins, 8 pins,
and 10 pins available
Designed to meet MIL-PRF-83401 characteristic “V” and “H”
These resistor networks are available in 6 pins, 8 pins and
10 pins styles in both standard and custom circuits. They
incorporate Vishay Dale Thin Film’s patented passivated
nichrome film to give superior performance on temperature
coefficient of resistance, thermal stability, noise, voltage
coefficient, power handling and resistance stability. The
leads are attached to the metallized alumina substrates by
Thermo-Compression bonding. The body is molded
thermoset plastic with gold plated copper alloy leads. This
product will outperform all of the requirements of
characteristic “V” and “H” of MIL-PRF-83401.
• Compatible with automatic insertion equipment
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
* Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
TYPICAL PERFORMANCE
TCR
TOL.
ABSOLUTE
TRACKING
25
2
ABSOLUTE
RATIO
0.1
0.05
SCHEMATIC
Schematic 01
1
2
3
4
Schematic 03
N
1
2 3
4
Schematic 06
N-1
N
1
2
3
4
N
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
CONDITIONS
Passivated nichrome
-
Pin/Lead Number
6, 8, 10
-
Resistance Range
Material
100  to 200 k per resistor
-
TCR: Absolute
± 25 ppm/°C (standard)
- 55 °C to + 125 °C
TCR: Tracking
± 2 ppm/°C (typical less 1 ppm/°C equal values) (1)
- 55 °C to + 125 °C
± 0.1 % to ± 1.0 %
+ 25 °C
Tolerance: Absolute
Tolerance: Ratio
± 0.05 % to ± 0.1 % to R1
+ 25 °C
Power Rating: Resistor
0.100 W (per element typical at + 25 °C)
Maximum at + 70 °C
Power Rating: Package
0.500 W
Maximum at + 70 °C
Stability: Absolute
R ± 0.05 %
2000 h at + 70 °C
Stability: Ratio
R ± 0.015 %
2000 h at + 70 °C
Voltage Coefficient
< 0.1 ppm/V
-
100 V
-
Operating Temperature Range
- 55 °C to + 125 °C
-
Storage Temperature Range
- 55 °C to + 125 °C
-
< - 30 dB
-
Working Voltage
Noise
Thermal EMF
< 0.08 μV/°C
-
Shelf Life Stability: Absolute
R ± 0.01 %
1 year at + 25 °C
Shelf Life Stability: Ratio
R ± 0.002 %
1 year at + 25 °C
Note
(1) Consult factory for TCR tracking specifications 01 schematic
Revision: 15-Mar-13
Document Number: 60037
114
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TSP
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in inches and millimeters
Part
Number
L
Indicates
Pin 1
G
Date
Code
Vishay
Logo
DIMENSION
A
B
C
D
E
F
G
H
L (6 Pins)
L (8 Pins)
L (10 Pins)
E
A
F
B
H
C
D
INCHES
0.035
0.040
0.100 ± 0.005 non-accum.
0.019 ± 0.006 typical
0.187 ± 0.010
0.135
0.095
0.012 ± 0.004
0.583 ± 0.015
0.783 ± 0.015
0.983 ± 0.015
MILLIMETERS
0.89
1.02
2.54 ± 0.13
0.48 ± 0.15
4.75 ± 0.25
3.43
2.41
0.31 ± 0.10
14.81 ± 0.38
19.89 ± 0.38
24.97 ± 0.38
CONSTRUCTION
High Purity
Alumina Substrate
Gold Plated
Copper Leads
Sputtered TAMELOX
Film System
Gold to Gold
Thermo-Compression Bond
(No Internal Solder)
MECHANICAL SPECIFICATIONS
Resistive Element
Substrate Material
Body Molded
Terminals
Plating
Model TSP - Lead (Pb)-free Standard
Model TSPS - Lead (Pb)-free Solder Coated Option
Model TSPL - Tin/Lead Solder Coated Option
Tin/Lead and Lead (Pb)-free Finish
Passivated nichrome or tantalum nitride
Alumina
Epoxy
Copper alloy
Nickel/gold
Gold plated
Sn96.5, Ag3.0, Cu0.5
Sn63
Hot solder dip
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: TSP6011002BUF
T
T
S
P
S
P
S
6
1
GLOBAL MODEL PIN COUNT
(3 or 4 digits)
(1 or 2 digits)
TSP
(Lead (Pb)-free)
(e4)
TSPL
(Tin/lead)
TSPS
(Lead (Pb)-free)
(e1)
6
8
10
0
SCHEMATICS
01 (1)
= 5, 7 or 9
resistors with
Pin 1 common
03 = 3, 4 or 5
isolated resistors
06 = 5, 7 or 9
series connected
0
1
1
0
0
2
B
U
F
0
1
1
0
0
2
C
U
F
TCR
CHARACTERISTICS
ppm/°C (2)
R = ± 25
H = ± 50 ppm/°C
K = ± 100 ppm/°C
Note
01 Schematic
greater than
250  only
(2)
Note
Consult factory for TCR tracking specifications 01 schematic
(1)
RESISTANCE
First 3 digits are
significant figures
and the last digit
specifies the
number of zeroes
to follow.
e.g.: 1001 = 1K
1002 = 10K
TOLERANCE AND
RATIO TOLERANCE
Absolute
A = 0.1 % (3)
B = 0.1 %
C = 0.25 %
D = 0.5 %
F = 1.0 %
Ratio
0.05 %
0.1 %
0.1 %
0.1 %
0.5 %
PACKAGING
UF = Tubed
Note
Tol. available on 1K and up only. R1 is reference resistor.
(3)
Historical Part Number example: TSP803R1001F (for reference purposes only)
TSP
SERIES
Revision: 15-Mar-13
8
PINS
03
R
SCHEMATIC
TCR
CHARACTERISTIC
1001
F
RESISTANCE
TOLERANCE AND
RATIO TOLERANCE
Document Number: 60037
115
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTF (Standard)
www.vishay.com
Vishay Dale Thin Film
Conformal, Single In-Line Thin Film Resistor,
Through Hole Network (Standard)
FEATURES
• Off-the-shelf delivery
Actual Size
• Wide variety of standards
Available
• Small size (SIP)
Available
• Standard designs - no NRE
• Low capacitance < 0.1 pF/PIN
Vishay Dale Thin Film resistor networks are designed to be
used in analog circuits in conjunction with operational
amplifiers. Engineers can use these circuits to achieve an
infinite number of very low noise and high stability circuits
for industrial, medical and scientific instrumentation.
This family of standard resistor networks will continually be
expanded with new and innovative designs, and Vishay Dale
Thin Film stocks most designs in house for off-the-shelf
convenience. However, if you can not find the standard
network you need, call applications engineering at
(716) 283-4025, as we may be able to meet your
requirements with a semicustom “match” for a quick
delivery.
For standard networks with tighter specifications, or for
custom networks, contact Applications Engineering at the
above number. For a quick review of typical applications,
request Vishay’s guide to understanding and using thin film
precision networks.
SCHEMATIC
Note
* Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
TYPICAL PERFORMANCE
ABSOLUTE
TCR
TRACKING
10
2
ABSOLUTE
RATIO
0.1
0.02
TOL.
Complete electrical specifications at the end of schematics.
ORDERING INFORMATION (R1 =)
R1
1
R2
2
3
Actual Size
L = Total length = 0.320" (8.13 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
Except PN 218 where seated height = 0.342" (8.69 mm) max.
1K: VTF209BX
50K: VTF214BX
2K: VTF210BX
100K: VTF215BX
5K: VTF211BX
200K: VTF216BX
10K: VTF212BX
500K: VTF217BX
20K: VTF213BX
1M: VTF218BX
Lead (Pb)-free option add “S” after part number,
e.g: VTF209SBX
RATIO DIVIDER 10:1
R1 + R2 = 10K, 100K, 1M
R2
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
TWO EQUAL RESISTORS
R1 = R2
R1 + R2
• Flame resistant (UL 94 V-0 rating)
ORDERING INFORMATION (R1 + R2 =)
= 10
9K + 1K = 10K: VTF280BX
R1
90K + 10K = 100K: VTF193BX
R2
900K + 100K = 1M: VTF281BX
1
2
3
Lead (Pb)-free option add “S” after part number,
e.g: VTF280SBX
Actual Size
L = Total length = 0.320" (8.13 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
Except PN 281 where seated height = 0.362" (9.19 mm) max.
Revision: 01-Mar-13
Document Number: 60038
116
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTF (Standard)
www.vishay.com
Vishay Dale Thin Film
DIVIDER NETWORK 10:1
R1 = 100K, 1M
R1
= 10
R2
ORDERING INFORMATION (R1 =)
100K: VTF282BX
R2
R1
1M: VTF283BX
1
2
Actual Size
3
L = Total length = 0.320" (8.13 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
Except PN 283 where seated height = 0.362" (9.19 mm) max.
TWO EQUAL RESISTORS - ISOLATED
ORDERING INFORMATION (R1 =)
R1 = R2
1K: VTF365BX
R1
R2
1
2
3
4
Actual Size
50K: VTF1000BX
2K: VTF997BX
100K: VTF348BX
5K: VTF998BX
200K: VTF1105BX
10K: VTF363BX
500K: VTF1106BX
20K: VTF1104BX
1M: VTF1103BX
25K: VTF999BX
L = Total length = 0.420" (10.67 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
Lead (Pb)-free option add “S” after part number,
e.g: VTF209SBX
RATIO DIVIDER 10:1 AND 100:1
R 1 + R 2 + R3
R3
R1 + R2 + R3
R2 + R3
R2
R1
R1 + R2 + R3 = 100K
90K
= 100
1
R3
9K
ORDERING INFORMATION (R1 + R2 + R3 =)
1K
2
3
4
100K: VTF330BX
Actual Size
= 10
Lead (Pb)-free option add “S” after part number,
e.g: VTF330SBX
L = Total length = 0.420" (10.67 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
FOUR EQUAL RESISTORS ONE COMMON
R1 = R2 = R3= R4 = 10K, 100K
ORDERING INFORMATION (R1 =)
R2
R1
1
2
3
R3
R4
4
10K: VTF366BX
5
Actual Size
L = Total length = 0.520" (13.21 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
Lead (Pb)-free option add “S” after part number,
e.g: VTF366SBX
DIVIDER NETWORK 2:1
R1 = 10K
R2
R1
=1
R3 =
R1 x R2
R1 + R2
100K: VTF367BX
1
R1
R2
R3
10K
10K
5K
2
3
4
L = 0.520 (13.21 mm), H = 0.280 (7.11 mm) max.
Revision: 01-Mar-13
ORDERING INFORMATION
VTF1087BX
5
Actual Size
Lead (Pb)-free option add “S” after part number,
e.g: VTF1087SBX
Document Number: 60038
117
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTF (Standard)
www.vishay.com
Vishay Dale Thin Film
DIVIDER NETWORK 2:1
R1 = 10K
R2
R1
=2
R3 =
R1 x R2
R1 + R2
R1
R2
R3
10K
20K
6.667K
1
2
3
ORDERING INFORMATION
4
VTF1088BX
Actual Size
5
Lead (Pb)-free option add “S” after part number,
e.g: VTF1088SBX
L = 0.520" (13.21 mm), H = 0.280" (7.11 mm) max.
DIVIDER NETWORK 5:1
R1 = 10K
R2
R1
=5
R3 =
R1 x R2
R1
R2
R3
10K
50K
8.333K
1
R1 + R2
2
3
ORDERING INFORMATION
4
VTF1089BX
5
Actual Size
Lead (Pb)-free option add “S” after part number,
e.g: VTF1089SBX
L = 0.520" (13.21 mm), H = 0.280" (7.11 mm) max.
DIVIDER NETWORK 10:1
R1 = 10K
R2
R1
R1
R2
R3
10K
100K
9.09K
ORDERING INFORMATION
= 10
R3 =
R1 x R2
1
R1 + R2
2
3
VTF1090BX
5 Actual Size
4
Lead (Pb)-free option add “S” after part number,
e.g: VTF1090SBX
Note:
• R2 TCR Tracking 3 ppm/°C
L = 0.520" (13.21 mm), H = 0.280" (7.11 mm) max.
DIVIDER NETWORK 1:1
R1 = 5K, 10K, 100K, 1M
R1 = R 2
R1
R2
ORDERING INFORMATION (R1 =)
R2
R1
5K: VTF225BX
10K: VTF286BX
1
2
3
4
5
100K: VTF219BX
6
Actual Size
L = Total length = 0.620" (15.75 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
Except PN 287 seated height = 0.362" (9.19 mm) max.
1M: VTF287BX
Lead (Pb)-free option add “S” after part number,
e.g: VTF225SBX
DIVIDER NETWORK 2:1
R1 = 10K, 100K
R1
R2
R1
=2
R2
R2
ORDERING INFORMATION (R1 =)
R1
10K: VTF1009BX
1
2
3
4
L = Total length = 0.620" (15.75 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
Revision: 01-Mar-13
5
6 Actual Size
100K: VTF1010BX
Lead (Pb)-free option add “S” after part number,
e.g: VTF1009SBX
Document Number: 60038
118
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTF (Standard)
www.vishay.com
Vishay Dale Thin Film
DIVIDER NETWORK 5:1
R1 = 10K, 100K
R1
R2
R1
=5
R2
R2
ORDERING INFORMATION (R1 =)
R1
10K: VTF1007BX
1
2
3
4
5
100K: VTF1008BX
6
L = Total length = 0.620" (15.75 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
Actual Size
Lead (Pb)-free option add “S” after part number,
e.g: VTF1007SBX
DIVIDER NETWORK 10:1
R1 = 10K
R2
R1
R1
R2
R1
ORDERING INFORMATION (R1 =)
R2
10K: VTF220BX
= 10
1
2
3
4
5
6
Actual Size
Lead (Pb)-free option add “S” after part number,
e.g: VTF220SBX
L = Total length = 0.620" (15.75 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
DIVIDER NETWORK 10:1
R1 = 10K, 100K, 1M
R1
R2
R1
R2
R2
ORDERING INFORMATION (R1 =)
R1
10K: VTF328BX
= 10
100K: VTF284BX
1
2
3
4
5
6
Actual Size
1M: VTF285BX
Lead (Pb)-free option add “S” after part number,
e.g: VTF328SBX
L = Total length = 0.620" (15.75 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
Except PN 285 seated height = 0.320" (8.13 mm) max.
DIVIDER NETWORK 20:1
R1 = 10K, 50K, 200K, 1M
R1
R2
R1
R2
R2
ORDERING INFORMATION (R1 =)
R1
10K: VTF1073BX
= 20
50K: VTF1074BX
1
2
3
4
5
6
Actual Size
200K: VTF1107BX
1M: VTF1108BX
Lead (Pb)-free option add “S” after part number,
e.g: VTF1073SBX
L = Total length = 0.620" (15.75 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
DIVIDER NETWORK 100:1
R1 = 1M
R1
R2
R1
R2
R2
R1
ORDERING INFORMATION (R1 =)
1M: VTF1109BX
= 100
1
2
Revision: 01-Mar-13
3
4
5
6 Actual Size
Lead (Pb)-free option add “S” after part number,
e.g: VTF1109SBX
Document Number: 60038
119
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTF (Standard)
www.vishay.com
Vishay Dale Thin Film
SIX RESISTOR NETWORK
(Designed for unity gain/high common mode voltage
rejection differential amplifier)
Common mode
Division ratio 250, 100, 50
R1 = R3 = 1M
R2 = 4K, 10K, 20K
R4 = 3.984K, 9.901K, 19.608K
R5 = 900K, 950K, 975K
R6 = 100K, 50K, 25K
ORDERING INFORMATION (R1/R2 =)
Devision Ratio = 250: VTF442BX
100: VTF443BX
R5
50: VTF444BX
R6
R1
R2
R4
R3
1M
1
2
3
Lead (Pb)-free option add “S” after part number,
e.g: VTF442SBX
1M
4
5
6
7
Actual Size
L = Total length = 0.720" (18.29 mm) max.
H = Seated height = 0.360" (9.14 mm) max.
Maximum voltage to pins 3 and 7 is 300 V
FOUR EQUAL RESISTORS ISOLATED
ORDERING INFORMATION (R1 =)
R1 = 1K, 10K, 25K, 50K, 100K
R1
R1
1K: VTF329BX
R1
2K: VTF1001BX
R1
5K: VTF1002BX
10K: VTF158BX
1
2
3
4
5
6
7
8
Actual Size
25K: VTF1003BX
50K: VTF1004BX
100K: VTF288BX
L = Total length = 0.820" (20.83 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
Lead (Pb)-free option add “S” after part number,
e.g: VTF329SBX
FOUR EQUAL RESISTORS ISOLATED
R1 = 1K, 10K, 100K
R1
ORDERING INFORMATION (R1 =)
R1
R1
1K: VTF1005BX
R1
10K: VTF1006BX
1
2
3
4
5
6
Absolute tolerance = 0.1 %
Ratio tolerance = 0.1 %
L = Total length = 0.820" (20.83 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
Revision: 01-Mar-13
7
8 Actual Size
100K: VTF1137BX
Lead (Pb)-free option add “S” after part number,
e.g: VTF1005SBX
Document Number: 60038
120
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTF (Standard)
www.vishay.com
Vishay Dale Thin Film
EIGHT EQUAL RESISTORS ONE COMMON
ORDERING INFORMATION (R1 =)
10K: VTF368BX
Actual Size
R1 = R2 = R3 = R4 = R5 = R6 = R7 = R8 = 10K, 100K
R1
1
2
R2
R3
3
R4
4
R5
5
100K: VTF369BX
R6
6
R7
7
R8
8
9
Lead (Pb)-free option add “S” after part number,
e.g: VTF368SBX
L = Total length = 0.920" (23.37 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
EIGHT RESISTOR NETWORK
(Designed for instrument amplifier with shield driver)
ORDERING INFORMATION
Actual Size
10K
1K
9K
1K
1K
9K
1K
VTF272BX
10K
Lead (Pb)-free option add “S” after part number,
e.g: VTF272SBX
Ref.
1
2
3
5
4
6
7
8
9
L = Total length = 0.920" (23.37 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
EIGHT BIT R/2R LADDER NETWORK
R = 10K, 1K
ORDERING INFORMATION (R =)
(± 1/2 LSB)
Actual Size
R
R
R
R
R
R
R
2R
2R
2R
2R
2R
2R
2R
10K: VTF1072BX
100K: VTF267BX
2R
1
2
3
4
5
6
7
8
2R
9
Lead (Pb)-free option add “S” after part number,
e.g: VTF1072SBX
10
L = Total length = 1.020" (25.91 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
RESISTANCE DOUBLER
R1 = 1K
ORDERING INFORMATION
VTF1011BX
Actual Size
1
1K
2K
4K
8K
16K
32K
64K
128K
256K
R1
R2
R3
R4
R5
R6
R7
R8
R9
2
3
Revision: 01-Mar-13
4
5
6
7
8
9
Lead (Pb)-free option add “S” after part number,
e.g: VTF1011SBX
10
Absolute tolerance = ± 0.1 %
Ratio tolerance = ± 0.1 %
TCR tracking = ± 3 ppm/°C
L = Total length = 1.02" (25.91 mm) max.
H = Seated height = 0.280" (7.11 mm) max.
Document Number: 60038
121
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTF (Standard)
www.vishay.com
Vishay Dale Thin Film
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
SPECIFICATIONS
CONDITIONS
Passivated nichrome
-
Pin/Lead Number
3 to 10
-
Resistance Range
100  to 2 M total
-
TCR: Absolute
± 10 ppm/°C (1)
0 °C to + 70 °C
TCR: Tracking
± 2 ppm/°C (1)
0 °C to + 70 °C
Tolerance: Absolute
± 0.1 %
+ 25 °C
Tolerance: Ratio
± 0.02 %
+ 25 °C
Power Rating: Resistor
100 mW
-
Power Rating: Package
500 mW
-
Stability: Absolute
R ± 0.05 %
2000 h at + 70 °C
Stability: Ratio
R ± 0.015 %
2000 h at + 70 °C
Voltage Coefficient
± 0.01 ppm/V
-
100 V
-
0 °C to + 70 °C
-
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
- 55 °C to + 125 °C
-
< - 35 dB
-
< 0.1 μV/°C
-
Shelf Life Stability: Absolute
R ± 0.01 %
1 year at + 25 °C
Shelf Life Stability: Ratio
R ± 0.002 %
1 year at + 25 °C
Note
(1) TCR over - 55 °C to + 125 °C ± 20 ppm/°C absolute, ± 3 ppm/°C tracking
DIMENSIONS AND IMPRINTING in inches and millimeters
Part Number
E
Date Code
Pin 1
H
Vishay
Logo
B
A
D
C
L
DIMENSION
INCHES
MILLIMETERS
A
0.125 min.
3.17
B
0.010 min.
0.25
C
0.100
2.54 typ.
D
0.020 typ.
0.48 ± 0.15
E
0.100 max.
2.54
F
0.010 typ.
0.25
F
Note
• “L” and “H” (length and height) dimensions for each model are found alongside the schematic drawing
MECHANICAL SPECIFICATIONS
Resistive Element
Passivated nichrome
Substrate Material
Alumina
Body
Epoxy coated
Terminals
Copper alloy
Tin/Lead Option
Sn60 - Sn63
Lead (Pb)-free Option
Tin/Lead and Lead (Pb)-free Finish
Revision: 01-Mar-13
Sn96.5, Ag3.0, Cu0.5
Hot solder dip
Document Number: 60038
122
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTF (Standard)
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: VTF211BX
V
T
F
V
T
F
2
1
1
0
1
0
4
S
GLOBAL MODEL
PART NUMBER
(3 or 4 digits)
LEAD (Pb)-FREE
(0 or 1 digits)
VTF
xxx or xxxx
S = Lead (Pb)-free (e1)
None = Tin lead
B
X
B
X
PACKAGING
BX = Conductive foam box
Example: 214
1004
Historical Part Number example: VTF 211 (for reference purposes only)
Revision: 01-Mar-13
VTF
211
MODEL
PART NUMBER
Document Number: 60038
123
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Applications
www.vishay.com
Vishay Dale Thin Film
Typical Resistor Network Applications
The following are circuit diagrams of operational amplifiers and their use of standard resistor networks. These diagrams are
supplied to illustrate typical resistor network applications using Vishay Thin Film’s standard precision, low noise, stable resistor
networks.
CIRCUIT DIAGRAMS
Inverting Amplifier with IOFF Compensation
R1
Non Inverting Amplifier
R2
R2
R1
+
–
+
–
+
A
+
Vin
–
–
Vout
Vin
Vout
R3
V0 R2
A = ------- = -----V in R 1
For A = 1
For A = 2
For A = 5
For A = 10
R1 x R2
R 3 = --------------------R1 + R2
Use VTF1087
Use VTF1088
Use VTF1089
Use VTF1090
For A = 10 Use VTF193, 280 and 281
For A = 2 Use VTF209 thru 218
For A = 11 Use VTF282 or 283
V0 R1 + R2
A = ------- = -------------------R2
V in
Differential Input Amplifier
R2
R1
–
Vin
Inverting Amplifier
R2
+
R1
+
–
R2
–
+
Vin
+
V0 R1
A = ------- = -----V in R 2
For A = 1
For A = 10
–
Vout
R1
A = -----R2
Power Supply Voltage Splitter
+ 1/2 Vin
R1
–
Ø
Vin
+
R1
For A = 20
R1 = 10K
= 50K
For A = 10
R1 = 10K
= 100K
= 1M
For A = 5
R1 = 10K
= 100K
For A = 2
R1 = 10K
= 100K
For A = 1
R1 = 5K
= 10K
= 100K
= 1M
Use VTF209 thru 218
Use VTF282 thru 283
Vout
Use VTF1073
Use VTF1074
Use VTF328
Use VTF284
Use VTF285
Use VTF1007
Use VTF1008
Use VTF1009
Use VTF1010
Use VTF225
Use VTF286
Use VTF219
Use VTF287
Two Operational Instrumentation Amplifier
R2
R1
R2
R2
R1
- 1/2 Vin
R1 = R2
R1 = 50K
= 100K
= 200K
= 500K
= 1M
Revision: 08-Dec-09
Use VTF214
Use VTF215
Use VTF216
Use VTF217
Use VTF218
–
+
–
+
Vout
+
Vin
–
R1 + R2 = 10K
R
GAIN at 1 + ------1 = 10
= 100K
R2
= 1M
+
–
Use VTF280
Use VTF193
Use VTF281
Document Number: 60039
124
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Applications
www.vishay.com
Vishay Dale Thin Film
CIRCUIT DIAGRAMS
Current Driver
R1
High Common Mode Voltage Rejection Unity Gain
Differential Amplifier
R3
R1
–
+
R5
+
R6
–
R2
R5
Vin
–
+
RT
+
Vout
–
Iout
R4
R2
Load
R3
R4
RLoad
I out = V in  R 1 + R 2 R 5
For R3 + R 4 + R 5 at R 1 + R 2
V in
I out at ------R5
V 0 MAX
Max I L = -------------------R5 + RL
For R1 = R 2 = R 3 = R 4 = R
1
1
I out at V in  ------ + ------- and
R 5 2R
V in
If R is large then I out at ------R5
R1
------ = CMV Rejection Ratio = CMVRR
R2
For R1, R2, R3, R4
100K
Use VTF219
1M
Use VTF287
R 1 = R 3 = 1 M
Note
• OP-AMP must be able to carry
the desired output current.
Optional External CMVRR Trim
R T = 2R 6
CMVRR = 250
= 100
= 50
Use VTF442
Use VTF443
Use VTF444
R6 = 1M
= 1M
= 1M
Use VTF442
Use VTF443
Use VTF444
Instrumentation Amplifier with Guard Driver
R3
1K
+
Note
• With optional adjustment (RT) over 120 dB, common mode
voltage rejection is possible.
R4
10K
–
R1
9K
Adder - Substractor
R8
R1
V1
R2
1K
GUARD
Vin
–
–
+
+
+
–
V2
R3
R2
1K
GUARD
Vout
–
+
R4
R1
A = ------  1 + ------ = 100
R3 
R 2
V3
–
V4
+
V0
R4
V5
R1
9K
R5
V6
R3
1K
R4
10K
Use VTF272
Note
• OP-AMP references AD713, LTC1058, RMAX479
Revision: 08-Dec-09
R2
R6
R7
If R 1 thru R 6 = R and R 7 = R 8 = R 1 then
R1
V 0 = ------   V 1 + V 2 + V 3 – V 4 – V 5 – V 6 
R
Use VTF366
R1 thru R4 = 10K
R1 thru R4 = 100K
Use VTF367
Notes
(1) Unused source inputs must be grounded
(2) Circuit assumes the source impedance of all voltage sources are
buffered or low (impedance adds to input resistors)
Document Number: 60039
125
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Applications
www.vishay.com
Vishay Dale Thin Film
CIRCUIT DIAGRAMS
Non Inverting Two Input Adder
Two Input Adder
C1
R1
R1
V1
R2
V2
V3
R4
R3
R3
ex
–
ey
+
R2
–
V0
A
ey
V1
V0
ex
+
V2
R4
V
V
V
V
------1 + ------2 + ------3 – ------0 = 0
R1 R2 R3 R4
If R 1 = R 2 = R 3 then
R
V 1 + V 2 + V 3 = ------  V 0
R4
R4
A GAIN = -----R
R1 thru R4 = 10K
R1 thru R4 = 100K
C2
Always two inputs of OP-AMP at same potential ex = ey
V1 – ey V2 – ey
------------------  ------------------ = 0
R3
R4
V0 R1
e x = -------------------- = e y
R1 + R2
2V 0 R 1
If R3 = Ry the V1 + V2 = 2ey = -------------------R1 + R2
Use VTF366
Use VTF367
Note
• Potential at two inputs of OP-AMP are always equal. ex = ey
Three Adder Buffer Input Non Inverting
C1
If we make R1 = R2 then V1 + V2 = V0 VTF215, 216, 218 or 218
V0
If we make R1 = R2 then V1 + V2 = -----VTF193 or 281
5
Notes
(1) Circuit assumes the source impedance is very low or
incorporated in R1 and R2
(2) Unused inputs should be grounded otherwise equations will not
hold true
R3 R4
(3) C and C should be chosen R C = ------------------- C
1
2
2 2
R3 + R4 2
Four Input Adder
R2
R1
R1
R2
–
V1
V2
V3
V1
R3
–
V0 R1
e x = -------------------R1 + R2
V3
C2
Networks for R1 and R2 use VTF212, 213 or 215
For R3, R4, R5 and R6 use VTF366 or 367 where
R3 = R4 = R5 = R6
Note
• Capacitor values should be determined for desired cut off
1
frequency and R 2 C 1 = --- R 3 C 2 .
4
For amplifier use AD713, LT1058 or RMAX479 these contain all
four OP-AMP in one package.
For best results all unused inputs should be grounded.
These diagrams are supplied to illustrate typical resistor
network applications. Vishay assumes no responsibility
for specific use of performance.
V0
ex  ey
R4
R5
C1
+
R3
V2
R4
R6
Revision: 08-Dec-09
ex
ey
V0
+
R5
V4
R6
C2
V1 – ex V2 – ex V3 – ex V4 – ex
------------------ + ------------------ + ------------------ + -----------------R3
R4
R5
R6
If R3 = R4 = R5 = R6 then
4V 0 R 1
V 1 + V 2 + V 3 + V 4 = 4e x = -------------------R1 + R2
If we use VTF280 for R1 + R2 and VTF367 for R3, R4, R5 and R6 then
4V 0 V 0
V 1 + V 2 + V 3 + V 4 = ---------- = -------- or A = 2.5
10
2.5
or for R1, R2 use VTF212
4V 0
V 1 + V 2 + V 3 + V 4 = ---------- = 2V 0 or A = 0.5
2
Notes
(1) Unused source inputs must be grounded
(2) Circuit assumes the source impedance of all voltage sources are
buffered or low (impedance adds to input resistors)
Document Number: 60039
126
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTF (Custom)
www.vishay.com
Vishay Dale Thin Film
Conformal, Single In-Line Thin Film Resistor,
Through Hole Network (Custom)
FEATURES
• Minimal PC board space
• Standard 100 mil centers
Available
• Exceptional ratio stability over time and
temperature (R ± 0.015 % at + 70 °C at 2000 h)
Available
• Integrated construction
• Conformal coating flame resistant (UL 94 V-0 rating)
• Compliant to RoHS Directive 2002/95/EC
Wirewound or metal film performance in a space saving
package.
Note
* Pb containing terminations are not RoHS compliant, exemptions
may apply
SIP networks available in 3 pins to 10 pins sizes can obtain
important performance parameters in an economical, mass
producible style. SIPs take up the least amount of board
space and are the easiest possible configuration to
hand-insert into printed circuit boards. Standard pin centers
are 0.100". Passivation coatings plus a conformal coating of
epoxy protect the active element from the outside
environment.
TYPICAL PERFORMANCE
TCR
TOL.
ABSOLUTE
TRACKING
10
2
ABSOLUTE
RATIO
0.05
0.02
SCHEMATIC
Custom schematics available.
Please consult factory.
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
SPECIFICATIONS
CONDITIONS
Passivated nichrome
-
3 to 10
-
100  to 2 M total
-
TCR: Absolute
± 10 ppm/°C to ± 25 ppm/°C
- 55 °C to + 125 °C
TCR: Tracking
Resistance Range
± 2 ppm/°C to ± 5 ppm/°C
- 55 °C to + 125 °C
Tolerance: Absolute
± 0.05 % to ± 1.0 %
+ 25 °C
Tolerance: Ratio
± 0.01 % to ± 0.5 %
+ 25 °C
0.100 W (per element)
Maximum at + 70 °C
-
Maximum at + 70 °C
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
R ± 0.05 %
2000 h at + 70 °C
Stability: Ratio
R ± 0.015 %
2000 h at + 70 °C
Voltage Coefficient
< 0.1 ppm/V
-
Working Voltage
100 V
-
Operating Temperature Range
- 55 °C to + 125 °C
-
Storage Temperature Range
- 55 °C to + 125 °C
-
< - 30 dB
-
Noise
Thermal EMF
< 0.10 μV/°C
-
Shelf Life Stability: Absolute
R ± 0.01 %
1 year at + 25 °C
Shelf Life Stability: Ratio
R ± 0.002 %
1 year at + 25 °C
Revision: 02-Sep-11
Document Number: 60041
127
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTF (Custom)
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in inches and millimeters
L Max.
E
H Max.
C
A
Pin 1
F
D
B
Part Number
Date
Code
Vishay Logo
DIMENSION
A
B
C
D
E
F
L (3 Pins)
L (4 Pins)
L (5 Pins)
L (6 Pins)
L (7 Pins)
L (8 Pins)
L (9 Pins)
L (10 Pins)
H (3 Pins)
H (4 Pins)
H (5 Pins)
H (6 Pins)
H (7 Pins)
H (8 Pins)
H (9 Pins)
H (10 Pins)
INCHES
0.058 typ.
0.100 typ.
0.020 ± 0.003
0.125 min.
0.110 max.
0.010 typ.
0.320
0.420
0.520
0.620
0.720
0.820
0.920
1.020
MILLIMETERS
1.47 typ.
2.54 typ.
0.51 ± 0.08
3.18 min.
2.79 max.
0.25 typ.
8.13
10.67
13.21
15.75
18.29
20.83
23.37
25.91
0.280 (1)
7 (1)
Note
(1) H dimension, R-value and schematic dependent
MECHANICAL SPECIFICATIONS
Resistive Element
Passivated nichrome
Substrate Material
Alumina
Body
Epoxy coated
Terminals
Copper alloy
Tin/Lead Option
Sn60 - Sn63
Lead (Pb)-free Option
Sn96.5, Ag3.0, Cu0.5
Tin/Lead and Lead (Pb)-free Finish
Hot solder dip
ORDERING INFORMATION CHECK LIST (Customs)
Special requirements should be identified in advance, but as a minimum, you should have the following information ready.
ELECTRICAL
1. Resistors, by value and tolerance
2. Reference resistor(s) and matching of which resistors to which
reference resistors
3. Resistance by ratio
4. Absolute temperature coefficient of resistivity
5. Temperature tracking of subordinate resistors to reference
resistor(s)
6. Maximum operating voltage
7. Resistor power ratings
8. Operating temperature range
MECHANICAL
1. Maximum allowable seated height (from PC board to top of
network)
2. Special marking concerns
3. Schematic pin out of package
4. Specify if lead (Pb)-free
For additional assistance refer to Vishay Thin Film’s guide to understanding Thin Film precision.
Resistor networks or application engineering.
All standard products may be ordered directly from Vishay Thin Film.
Revision: 02-Sep-11
Document Number: 60041
128
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTF (Custom)
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: VTF211BX
V
T
F
V
T
F
2
1
1
0
1
0
4
S
GLOBAL MODEL
PART NUMBER
(3 or 4 digits)
LEAD (Pb)-FREE
(0 or 1 digits)
VTF
xxx or xxxx
S = Lead (Pb)-free (e1)
None = Tin lead
B
X
B
X
PACKAGING
BX = Conductive foam box
Example: 214
1004
Historical Part Number example: VTF Custom 211 (for reference purposes only)
Revision: 02-Sep-11
VTF Custom
211
MODEL
PART NUMBER
Document Number: 60041
129
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
100-267
www.vishay.com
Vishay Dale Thin Film
Decade Divider, Single In-Line, Thin Film Divider,
Through Hole Resistor Network
FEATURES
• Tight ratio tolerance (0.01 %)
• 5 decade ratio divider
Available
• High voltage capability (300 V)
Available
• Compliant to RoHS Directive 2002/95/EC
• Halogen-free according to IEC 61249-2-21
definition
Precision resistor networks comprised of series-connected
decade values are provided in single-in-line style with
edgemounted leads on 100 mil centers. Integrated thin film
construction, laser-trimmed to extremely tight tolerances,
insures exceptionally close tracking over temperature and
throughout operating life, in either voltage division or current
monitoring mode. Voltage coefficient and noise are
extremely low. Designers gain several advantages over the
use of discrete resistor sets, including smaller size, better
overall tracking, greater reliability, and lower cost.
Note
* Pb containing terminations are not RoHS compliant, exemptions
may apply
TYPICAL PERFORMANCE
TCR
TOL.
ABSOLUTE
TRACKING
25
5
ABSOLUTE
RATIO
0.1
0.01
SCHEMATIC
100
900
9K
90K
900K
100-267 Style
1
2
3
4
5
6
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
SPECIFICATIONS
CONDITIONS
Passivated nichrome
-
Pin/Lead Number
6
-
Resistance Range
100  to 1 M total
-
TCR: Absolute
± 25 ppm/°C
0 °C to + 70 °C
TCR: Tracking
± 5 ppm/°C
0 °C to + 70 °C
Tolerance: Absolute
± 0.1 %
+ 25 °C
± 0.01 % to ± 0.1 %
+ 25 °C
Power Rating: Resistor
0.100 W
Maximum at + 70 °C
Power Rating: Package
0.500 W
Maximum at + 70 °C
Tolerance: Ratio
Stability: Absolute
1000 ppm
2000 h at + 70 °C
Stability: Ratio
200 ppm
2000 h at + 70 °C
0.1 ppm/V
-
300 V
-
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
0 °C to + 70 °C
-
- 55 °C to + 125 °C
-
- 20 dB
-
0.08 μV/°C
-
Shelf Life Stability: Absolute
R ± 0.01 %
1 year at + 25 °C
Shelf Life Stability: Ratio
R ± 0.002 %
1 year at + 25 °C
Revision: 04-Jan-12
Document Number: 60044
130
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
100-267
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in inches and millimeters
B
DIMENSION
INCHES
MILLIMETERS
A
0.100 max.
2.54
A
Vishay
Logo
100-267
C
Date Code
Pin 1
Ident.
E
B
0.620 max.
15.78
C
0.350 max.
8.89
D
0.125 min.
0.25
D
E
0.010 typ.
2.54
F
0.020 typ.
0.51
G
0.1 (5 x) typ.
2.54
F
G
PART NUMBER 100-
267-T
267-Q
Ratio Tolerance (1)
0.01 %
0.025 %
Voltage Rating
267-A
267-B
0.05 % 0.1 %
R1 + R2 + R3 + R4
RT
=
100 kΩ
1 MΩ
=
0.1
R1 + R2 + R3
RT
=
10 kΩ
1 MΩ
=
0.01
R1 + R2
RT
=
1 kΩ
1 MΩ
=
0.001
R1
=
100 Ω
300 V
Noise Index
< - 30 dB
Note
(1) Excluding the 100 
900
100
1
2
9K
3
90K
4
900K
6
5
± 0.1 %
MECHANICAL SPECIFICATIONS
Resistive Element
Substrate Material
Body
Terminals
Marking Resistance to Solvents
Tin/Lead Option
Lead (Pb)-free Option
Tin/Lead and Lead (Pb)-free Finish
Passivated nichrome
Alumina
Conformal coated
Copper alloy
Per MIL-PRF-83401
Sn60 - Sn63
Sn96.5, Ag3.0, Cu0.5
Hot solder dip
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: VTF100-267TUF
V
T
V
T
F
F
SERIES MODEL
(10 or 11 digits)
VTF100-267
(Tin lead)
VTF100S-267
(Lead (Pb)-free)
(e1)
1
1
0
0
0
0
S
2
-
TOLERANCE
(1 digit)
T = 0.01 % ratio
Q = 0.025 % ratio
A = 0.05 % ratio
B = 0.1 % ratio
6
2
7
6
7
T
B
X
T
B
X
PACKAGING
(2 digits)
BX = Boxed
Historical Part Number example: 100-267Q (for reference purposes only)
100
267
Q
SERIES
MODEL
TOLERANCE
Revision: 04-Jan-12
Document Number: 60044
131
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TDP
www.vishay.com
Vishay Dale Thin Film
Molded, Dual-In-Line Thin Film Resistor, Through Hole Network
FEATURES
Actual Size
Vishay Dale Thin Film offers two standard circuits in a
14 pins and 16 pins molded dual-in-line over a 100  to
100 k resistance range. The networks feature ratio
tolerance to 0.05 % with a TCR tracking of 5 ppm/°C.
• Standard rugged, molded case construction
(14 pins and 16 pins)
Available
• Highly stable thin film
(500 ppm at + 70 °C at 2000 h)
Available
• Low temperature coefficient (± 25 ppm/°C)
• Compatible with automatic insertion equipment
• Standard isolated pin one common schematic
• Isolated and bussed schematics
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
* Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
TYPICAL PERFORMANCE
ABSOLUTE
TRACKING
25
5
ABSOLUTE
RATIO
0.1
0.05
TCR
TOL.
SCHEMATIC
Schematic TDP01
Pin 1
Schematic TDP03
Pin 1
TDP-1403
TDP-1401
TDP-1603
TDP-1601
Models: TDP1403 and TDP1603
7 or 8 isolated resistors
Models: TDP1401 and TDP1601
13 or 15 resistors with one pin common
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
Revision: 08-Jan-13
SPECIFICATIONS
Passivated nichrome
14, 16
100  to 100 k
± 25 ppm/°C
± 5 ppm/°C
± 0.1 %
± 0.05 % to ± 0.5 %
0.05 W/resistor = 01 circuit
0.10 W/resistor = 03 circuit
0.8 W/package
R ± 0.05 %
R ± 0.015 %
< 1 ppm/V (typical)
100 V
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 30 dB
0.08 μV/°C
R ± 0.01 %
R ± 0.002 %
CONDITIONS
- 55 °C to + 125 °C
- 55 °C to + 125 °C
+ 25 °C
+ 25 °C
at + 25 °C
Maximum at + 70 °C
2000 h at + 70 °C
2000 h at + 70 °C
1 year at + 25 °C
1 year at + 25 °C
Document Number: 60045
132
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TDP
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in inches and millimeters
A
DIMENSION
INCHES
MILLIMETERS
A
0.755
19.18
B
0.250
6.35
C
0.075
1.91
D
0.100
2.54
E
0.018
0.46
F
0.060
1.52
G
0.025
0.64
H
0.190
4.83
J
0.130
3.30
K
0.320
8.13
L
0.310
7.87
M
0.010
0.25
A
0.755
19.18
B
0.250
6.35
C
0.025
0.64
D
0.100
2.54
E
0.018
0.46
F
0.060
1.52
G
0.025
0.64
H
0.190
4.83
J
0.130
3.30
K
0.320
8.13
L
0.310
7.87
M
0.010
0.25
Part
TDP14XX
B
Pin 1
Vishay
Logo
Date Code
H
G
K
J
F
L
C
E
D
M
A
Part
B
TDP16XX
Pin 1
Vishay
Logo
Date Code
H
G
J
K
F
L
C
E
D
M
Revision: 08-Jan-13
Document Number: 60045
133
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TDP
www.vishay.com
Vishay Dale Thin Film
MECHANICAL SPECIFICATIONS
Resistive Element
Passivated nichrome
Substrate Material
Alumina
Body
Conformal coated
Terminals
Copper alloy
Tin/Lead Option
Sn90
Lead (Pb)-free Option
100 % matte tin
Tin/Lead and Lead (Pb)-free Finish
Hot solder dip
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: TDP14031002BUF
T
T
D
P
1
4
0
3
1
0
0
2
B
U
F
D
P
T
1
6
0
3
1
0
0
3
A
U
F
GLOBAL MODEL
(3 or 4 digits)
PINS
SCHEMATICS
RESISTANCE
TDP
(Tin lead)
14
01 = 13 or 15
resistors with
1 common pin
TDPT
(Lead (Pb)-free)
(e3)
16
First 3 digits are
significant figures
and the last digit
specifies the
number of zeroes
to follow.
03 = 7 or 8
isolated resistors
TOLERANCE AND
RATIO TOLERANCE
Absolute
A = ± 0.1 % (1)
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F = ± 1.0 %
PACKAGING
Ratio
± 0.05 %
± 0.1 %
± 0.1 %
± 0.1 %
± 0.5 %
UF = Tubed
e.g.: 1001 = 1K
1002 = 10K
Historical Part Number example: TDP14031001F (for reference purposes only)
TDP
14
03
1001
F
SERIES
PINS
SCHEMATIC
RESISTANCE
TOLERANCE AND
RATIO TOLERANCE
Revision: 08-Jan-13
Document Number: 60045
134
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CS
www.vishay.com
Vishay Dale Thin Film
Ceramic Sandwich, Single-In-Line Thin Film Resistor,
Through Hole Network (Low Profile 0.20 Custom)
FEATURES
Actual Size
Vishay Dale Thin Film presents a design concept in precision
thin film resistor networks. The essence of this new concept
is the marriage of two principle design elements . . . a unique
resistive film, having electrical properties comparable to
those of wire-wound resistors, and a rugged, low cost,
ceramic package and an almost limitless variety of sizes and
configurations.
• Gold-to-gold terminations. External leads are
attached directly to gold pads on the ceramic
substrate by thermo-compression bonding (no
internal solder)
• Low profile (0.200 min.)
• Custom pin-outs available
• Compliant to RoHS Directive 2002/95/EC
• Halogen-free according to IEC 61249-2-21
definition
Available
Available
Note
* Pb containing terminations are not RoHS compliant, exemptions
may apply
TYPICAL PERFORMANCE
TCR
TOL.
ABSOLUTE
TRACKING
25
2
ABSOLUTE
RATIO
0.05
0.01
SCHEMATIC
Custom schematics available.
Please consult factory.
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
Revision: 20-Oct-11
SPECIFICATIONS
Passivated nichrome
Tantalum nitride
3 to 10
20  to 2000 k (total)
20  to 500 k (total)
± 10 ppm/°C to ± 25 ppm/°C ± 50 ppm/°C to ± 100 ppm/°C
± 2 ppm/°C
± 5 ppm/°C
± 0.05 % to ± 1.0 %
± 0.01 % to ± 0.5 %
± 0.02 % to ± 0.5 %
100 mW (per element)
R ± 0.05 %
R ± 0.1 %
R ± 0.015 %
R ± 0.02 %
< 0.1 ppm/V
< 0.1 ppm/V
100 V
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 30 dB
< 0.08 μV/°C
R ± 0.01 %
R ± 0.002 %
CONDITIONS
- 55 °C to + 125 °C
- 55 °C to + 125 °C
+ 25 °C
+ 25 °C
Typical at + 25 °C
2000 h at + 70 °C
2000 h at + 70 °C
1 year at + 25 °C
1 year at + 25 °C
Document Number: 60081
135
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CS
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in inches and millimeters
L Max.
H
C
B
A
Pin 1
Part Number
Date Code
Vishay Logo
DIMENSION
A
B
C
D
E
L (3 Pins)
L (4 Pins)
L (5 Pins)
L (6 Pins)
L (7 Pins)
L (8 Pins)
L (9 Pins)
L (10 Pins)
H (3 Pins)
H (4 Pins)
H (5 Pins)
H (6 Pins)
H (7 Pins)
H (8 Pins)
H (9 Pins)
H (10 Pins)
INCHES
0.100 typ. (1)
0.020 ± 0.002 typ.
0.125 min.
0.100 max.
0.010
0.320
0.420
0.520
0.620
0.720
0.820
0.920
1.020
MILLIMETERS
2.54 typ.
0.51 ± 0.05 typ.
3.17 min.
2.54 max.
0.25
8.13
10.67
13.21
15.75
18.25
20.83
23.37
25.91
0.200 (2)
7.11 (2)
Notes
(1) Non-accum.
(2) Resistance value and schematic dependent. By occupying more than one 0.100 inch square, higher values are available.
MECHANICAL SPECIFICATIONS
Resistive Element
Passivated nichrome or tantalum nitride
Substrate Material
Alumina
Body
Ceramic
Terminals
Copper alloy
Plating
Gold
Tin/Lead Option
Sn63
Lead (Pb)-free Option
Sn96.5, Ag3.0, Cu0.5
Tin/Lead and Lead (Pb)-free Finish
Hot solder dip
ORDERING INFORMATION CHECK LIST
Special requirements should be identified in advance, but as a minimum, you should have the following information ready.
ELECTRICAL
1. Resistors, by value and tolerance
2. Reference resistor(s) and matching of which resistors to which
reference resistors
3. Resistance by ratio
4. Absolute temperature coefficient of resistivity
5. Temperature tracking of subordinate resistors to reference
resistor(s)
6. Maximum operating voltage
7. Resistor power ratings
8. Operating temperature range
MECHANICAL
1. Maximum allowable seated height (from PC board to top of
network)
2. Special marking concerns
3. Schematic pin out of package
4. Specify if lead (Pb)-free
For additional assistance refer to Vishay Dale Thin Film’s guide to understanding Thin Film precision.
Resistor networks or application engineering.
All standard products may be ordered directly from Vishay Dale Thin Film.
Revision: 20-Oct-11
Document Number: 60081
136
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CS
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CS1xx-xxxBX
C
S
C
S
1
1
x
x
-
x
x
x
x
x
-
x
x
x
-
GLOBAL MODEL
(2 or 3 digits)
CUSTOM PART NUMBER
(7 or 9 digits)
CS
1xx-xxx
or
1xx-xxx-x
x
B
X
B
X
PACKAGING
BX = Boxed
Historical Part Number example: 1xx-xxx (for reference purposes only)
1xx-xxx
CUSTOM PART NUMBER
Revision: 20-Oct-11
Document Number: 60081
137
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CSD
www.vishay.com
Vishay Dale Thin Film
Ceramic Sandwich, Dual-In-Line Thin Film Resistor,
Through Hole Network (Custom)
FEATURES
A dual-in-line monolithic ceramic package in a variety of
sizes and configurations. A rugged, low cost packaging
technique with 4 leads to 20 leads that allows higher
resistance integration than chip and wire ceramic packages.
• Gold-to-gold terminations. External leads are
attached directly to gold pads on the ceramic
Available
substrate by thermo-compression bonding (no
internal solder)
Available
• Monolithc construction
• Ceramic package with no cavity. 4 pins to 20
pins.
• Flexibility of lead variations to save PC board
space
• Compliant to RoHS Directive 2002/95/EC
• Halogen-free according to IEC 61249-2-21 definition
Note
* Pb containing terminations are not RoHS compliant, exemptions
may apply
TYPICAL PERFORMANCE
ABSOLUTE
TCR
TOL.
TRACKING
10
2
ABSOLUTE
RATIO
0.1
0.02
SCHEMATIC
Custom schematics available.
Please consult factory
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
Note
(1) Tantalum nitride film is custom
Revision: 20-Oct-11
SPECIFICATIONS
Passivated nichrome
Tantalum nitride (1)
4 to 20
100  to 5 M total
± 10 ppm/°C
± 25 ppm/°C to ± 100 ppm/°C
± 2 ppm/°C
± 5 ppm/°C
± 0.1 % to ± 1.0 %
± 0.01 % to ± 0.1 %
100 mW (per element (typical))
500 mW
1000 ppm
300 ppm
0.1 ppm/V
100 V
- 55 °C to + 125 °C
- 55 °C to + 125 °C
< - 30 dB
< 0.1 μV/°C
R ± 0.01 %
R ± 0.002 %
CONDITIONS
- 55 °C to + 125 °C
- 55 °C to + 125 °C
+ 25 °C
+ 25 °C
Maximum at + 70 °C
Maximum at + 70 °C
2000 h at + 70 °C
2000 h at + 70 °C
1 year at + 25 °C
1 year at + 25 °C
Document Number: 60046
138
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CSD
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in inches and millimeters
L
Part Number
A
Pin 1
XXXX XX
▼
Vishay Logo
Date Code
B
D
E
C
F
G
H
I
Non-cumulative
J
DIMENSION
INCHES
MILLIMETERS
A
0.260 max.
6.61
B
0.050
1.27
C
0.160 typical
4.06
D
0.080
2.03
E
0.125
3.18
F
0.125 min.
3.18
G
0.01
0.254
H
0.325
8.25
I
0.100
2.54
J
0.020
0.51
L (4 Pins)
0.220
5.59
L (6 Pins)
0.320
8.13
L (8 Pins)
0.420
10.67
L (10 Pins)
0.520
13.21
L (12 Pins)
0.620
15.75
L (14 Pins)
0.720
18.29
L (16 Pins)
0.820
20.83
L (18 Pins)
0.920
23.37
L (20 Pins)
1.020
25.91
MECHANICAL SPECIFICATIONS
Resistive Element
Passivated nichrome or tantalum nitride
Substrate Material
Alumina
Body
Ceramic
Terminals
Copper alloy
Plating
Gold
Tin/Lead Option
Sn63
Lead (Pb)-free Option
Sn96.5, Ag3.0, Cu0.5
Tin/Lead and Lead (Pb)-free Finish
Hot solder dip
ORDERING INFORMATION CHECK LIST
Special requirements should be identified in advance, but as a minimum, you should have the following information ready.
ELECTRICAL
1. Resistors, by value and tolerance
2. Reference resistor(s) and matching of which resistors to which
reference resistors
3. Resistance by ratio
4. Absolute temperature coefficient of resistivity
5. Temperature tracking of subordinate resistors to reference
resistor(s)
6. Maximum operating voltage
7. Resistor power ratings
8. Operating temperature range
MECHANICAL
1. Maximum allowable seated height (from PC board to top of
network)
2. Special marking concerns
3. Schematic pin out of package
4. Specify if lead (Pb)-free
For additional assistance refer to Vishay Dale Thin Film’s guide to understanding Thin Film precision.
Resistor networks or application engineering.
All standard products may be ordered directly from Vishay Dale Thin Film.
Revision: 20-Oct-11
Document Number: 60046
139
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CSD
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CSD1xx-xxxUF
C
S
D
C
S
D
1
1
x
x
-
x
x
x
x
x
-
x
x
x
-
GLOBAL MODEL
(2 or 3 digits)
CUSTOM PART NUMBER
(7 or 9 digits)
CSD
1xx-xxx
or
1xx-xxx-x
x
U
F
U
F
PACKAGING
UF = Tubed
Historical Part Number example: 1xx-xxx (for reference purposes only)
1xx-xxx
CUSTOM PART NUMBER
Revision: 20-Oct-11
Document Number: 60046
140
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HD
www.vishay.com
Vishay Dale Thin Film
Hermetic, Dual-In-Line Thin Film Resistor,
Through Hole Network (Custom)
FEATURES
Designed to meet or exceed MIL-PRF-83401 characteristic “C”
The most advanced thin film technology is put to work in the
manufacture of exceptionally stable, precision thin film
resistor networks in a variety of popular hermetic-type
packages. These networks are based on the utilization of a
resistive film possessing outstanding stability throughout
board assembly and equipment life.
Manufacturing is performed under rigid process control by a
team of specialists having many years experience in the
design, fabrication and automatic laser adjustment of
several hundred different precision thin film resistor
networks. Circuits are designed for specific customer
requirements and manufactured according to highly
standardized procedures. Testing is conducted in one of the
most completely equipped laboratories in the industry.
• True hermetic construction
• Standard 8 pins, 14 pins, 16 pins, 18 pins,
Available
20 pins packages
• Chip and wire construction
Available
• Exceptional stability over time and temperature
(500 ppm at + 70 °C at 2000 h)
• Military/aerospace
• Hermetically sealed
• Ideal for military/aerospace applications
• Compliant to RoHS Directive 2002/95/EC
• Halogen-free according to IEC 61249-2-21 definition
Note
* Pb containing terminations are not RoHS compliant, exemptions
may apply
TYPICAL PERFORMANCE
TCR
TOL.
ABSOLUTE
TRACKING
10
2
ABSOLUTE
RATIO
0.02
0.01
SCHEMATIC
Custom schematics available.
Please consult factory.
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
Note
(1) Tantalum nitride film is custom
Revision: 20-Oct-11
SPECIFICATIONS
Passivated nichrome
Tantalum nitride (1)
8 to 20
50  to 1500 k (total)
50  to 300 k (total)
± 10 ppm/°C to ± 25 ppm/°C
± 2 ppm/°C (typical less 1 ppm/°C equal values)
± 0.02 % to ± 1.0 %
± 0.01 % to ± 0.5 %
100 mW (per element (typical))
500 ppm
150 ppm
< 0.1 ppm/V
100 V
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 30 dB
< 0.10 μV/°C
R ± 0.01 %
R ± 0.002 %
CONDITIONS
- 55 °C to + 125 °C
- 55 °C to + 125 °C
+ 25 °C
+ 25 °C
+ 25°C
2000 h at + 70 °C
2000 h at + 70 °C
1 year at + 25 °C
1 year at + 25 °C
Document Number: 60047
141
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HD
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in inches and millimeters
L max.
Part Number
A
B
Pin 1 Ident.
Vishay Logo
Date Code
H
G
C
F
D
I
E
DIMENSION
INCHES
MILLIMETERS
A
0.295
7.49
B
0.310 ± 0.010
7.88 ± 0.25
C
0.035 ± 0.010
0.89 ± 0.25
D
0.100 non-accum.
2.54
E
0.018 ± 0.002
0.46 ± 0.05
3.30
F
0.130 typical
G
0.130 max.
3.30
H
0.300 typical
7.62
I
0.010 typical
0.25
L (8 Pins)
0.528
13.41
L (14 Pins)
0.710
18.03
L (16 Pins)
0.810
20.57
L (18 Pins)
0.910
23.11
L (20 Pins)
1.010
25.65
MECHANICAL SPECIFICATIONS
Resistive Element
Passivated nichrome or tantalum nitride
Substrate Material
Alumina
Body
Ceramic
Terminals
Copper alloy
Tin/Lead Option
Sn63
Lead (Pb)-free Option
Sn96.5, Ag3.0, Cu0.5
Tin/Lead and Lead (Pb)-free Finish
Hot solder dip
ORDERING INFORMATION CHECK LIST
Special requirements should be identified in advance, but as a minimum, you should have the following information ready.
ELECTRICAL
1. Resistors, by value and tolerance
2. Reference resistor(s) and matching of which resistors to which
reference resistors
3. Resistance by ratio
4. Absolute temperature coefficient of resistivity
5. Temperature tracking of subordinate resistors to reference
resistor(s)
6. Maximum operating voltage
7. Resistor power ratings
8. Operating temperature range
MECHANICAL
1. Maximum allowable seated height (from PC board to top of
network)
2. Special marking concerns
3. Schematic pin out of package
4. Specify if lead (Pb)-free
For additional assistance refer to Vishay Dale Thin Film’s guide to understanding Thin Film precision.
Resistor networks or application engineering.
All standard products may be ordered directly from Vishay Dale Thin Film.
Revision: 20-Oct-11
Document Number: 60047
142
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HD
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: HD1xx-xxxUF
H
D
H
D
1
1
x
x
-
x
x
x
x
x
-
x
x
x
-
GLOBAL MODEL
(2 or 3 digits)
CUSTOM PART NUMBER
(7 or 9 digits)
HD
1xx-xxx
or
1xx-xxx-x
x
U
F
U
F
PACKAGING
UF = Boxed
Historical Part Number example: 1xx-xxx (for reference purposes only)
1xx-xxx
CUSTOM PART NUMBER
Revision: 20-Oct-11
Document Number: 60047
143
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HVPS
www.vishay.com
Vishay Dale Thin Film
High Value Precision SIP Thin Film Resistor,
Through Hole Network
FEATURES
• High nominal precision resistors
(value range 50K to 10M)
Available
• Highly accurate resistance tolerance
(up to ± 0.01 %)
Available
• Conformal coating flame resistant (UL 94 V-0)
rating
• Ultra low TCR (± 5 ppm/°C)
• High voltage
• Flame resistant (UL 94 V-0 rating)
• High voltage rating to 300 V
• Compliant to RoHS Directive 2002/95/EC
SCHEMATIC
• Halogen-free according to IEC 61249-2-21 definition
Note
* Pb containing terminations are not RoHS compliant, exemptions
may apply
APPLICATIONS
1
• Precise instrumentation (medical, test etc.)
2
• Precision amplifiers
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
SPECIFICATIONS
CONDITIONS
Passivated nichrome
-
2
-
50 000  to 5000 k (HVPS1)
100 000  to 10 000 k (HVPS2)
-
TCR: Absolute
5 ppm/°C to 25 ppm/°C
- 55 °C to + 125 °C
TCR: Tracking
-
-
± 0.01 % to ± 1.0 %
Maximum at + 70 °C
-
-
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
125 mW (HVPS1)
250 mW (HVPS2)
-
-
-
R ± 0.05 %
2000 h at + 70 °C
-
-
< 1.0 ppm/V
-
250 V (HVPS1)
300 V (HVPS2)
-
- 55 °C to + 125 °C
-
-
-
< - 30 dB
-
Thermal EMF
< 0.1 μV/°C
-
Shelf Life Stability: Absolute
R ± 0.01 %
1 year at + 25 °C
-
-
Shelf Life Stability: Ratio
Revision: 20-Oct-11
Document Number: 60091
144
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HVPS
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in inches (millimeters)
HVPS1
HVPS2
0.240 max.
(6.096)
PART NO:
DATECODE
0.110 max.
(2.794)
0.320 max.
(8.128)
0.110 max.
(2.794)
PART NO:
0.260 max.
(6.604)
0.260 max.
(6.604)
DATECODE
0.010 (0.25)
0.010 (0.25)
0.125 min.
(3.175)
0.125 min.
(3.175)
0.02 ± 0.005
(0.508 ± 0.127)
0.02 ± 0.005
(0.508 ± 0.127)
0.200 typ.
(5.08)
0.100 typ.
(2.54)
MECHANICAL SPECIFICATIONS
Resistive Element
Passivated nichrome
Substrate Material
Alumina
Body
Epoxy coated
Terminals
Copper alloy
Tin/Lead Option
Sn60 - Sn63
Lead (Pb)-free Option
Sn96.5, Ag3.0, Cu0.5
Tin/Lead and Lead (Pb)-free Finish
Hot solder dip
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: HVPS1E1003QBX
H
V
P
S
1
H
V
P
S
2
GLOBAL MODEL
(3 or 4 digits)
HVPS1
HVPS2
(Tin lead)
S
TCR
E = 25 ppm/°C
D = 15 ppm/°C
Y = 10 ppm/°C
Z = 5 ppm/°C
HVPS1S
HVPS2S
(Lead (Pb)-free)
(e1)
E
1
0
0
3
Q
B
X
Y
2
0
0
3
T
B
X
RESISTANCE
TOLERANCE
PACKAGING
First 3 digits are
significant figures.
Last digit specifies
the
number
of
zeroes to follow.
A = 0.05 %
B = 0.1 %
D = 0.5 %
F = 1.0 %
Q = 0.02 %
T = 0.01 %
BX =
Conductive foam box
e.g.: 1001 = 1K
1002 = 10K
1005 = 10M
Historical Part Number example: HVPS1E5004B (for reference purposes only)
HVPS1
E
5004
B
SERIES
TCR CHARACTERISTICS
RESISTANCE
TOLERANCE
Revision: 20-Oct-11
Document Number: 60091
145
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
M83401, C83401
www.vishay.com
Vishay Dale Thin Film
Thin Film Resistor Network Military, MIL-PRF-83401 Qualified,
Type RZ070, RZ080, RZ090, RZ210, RZ220, RZ230,
Single-In-Line SIP
FEATURES
Qualified to meet MIL-PRF-83401 characteristic “R”, “V”, and “H”
These resistor networks are available in 6 pins, 8 pins, and
10 pins in schematic C and G styles. Custom circuits are not
available. Schematic C and G only. They incorporate Vishay
Dale Thin Film’s patented passivated nichrome film to give
superior performance on temperature coefficient of
resistance, thermal stability, noise, voltage coefficient,
power handling and resistance stability. The leads are
attached to the metallized alumina substrates by
Thermo-Compression bonding. The body is molded
thermoset plastic with gold plated copper alloy leads. This
product will outperform all of the requirements of
characteristic “R”, “V”, and “H” of MIL-PRF-83401.
•
•
•
•
•
•
•
•
MIL-PRF-83401 qualified (cage code 57489)
Low Profile 0.195" (4.95 mm seated height)
Characteristics R (± 25 ppm), H, V, K, and M
Hot fused tin/lead 60/40 solder dipped
Rugged molded low profile construction with standoff
100 % screened to groups A MIL-PRF-83410 testing
Tolerances to 0.1 %
Isolated and bussed (schematic C and G)
TYPICAL PERFORMANCE
ABSOLUTE
TRACKING
25
5
TCR
ABSOLUTE
RATIO
0.1
0.1 to 0.05
TOL.
SCHEMATIC
C Schematic (Pin 1 Common)
1
2
3
4
G Schematic (Isolated)
N
1
2 3
4
N
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
SPECIFICATIONS
Passivated nichrome
6, 8, 10
100  to 200 k per resistor
± 25 ppm/°C to 300 ppm/°C
± 5 ppm/°C
± 0.1 % to ± 5.0 %
± 0.1 % to R1
0.06 mW to 0.120 mW (per element typical at + 25 °C) (1)
0.18 W to 1.08 W (1)
R ± 0.05 %
R ± 0.015 %
< 0.1 ppm/V
100 V
- 55 °C to + 125 °C
- 55 °C to + 125 °C
< - 30 dB
< 0.08 μV/°C
R ± 0.01 %
R ± 0.002 %
CONDITIONS
Tolerance dependent (2)
- 55 °C to + 125 °C (1)
- 55 °C to + 125 °C
+ 25 °C
+ 25 °C
Maximum at + 70 °C
Maximum at + 70 °C
2000 h at + 70 °C
2000 h at + 70 °C
1 year at + 25 °C
1 year at + 25 °C
Notes
(1) Consult MIL-PRF-83401
(2) “H” characteristic 100  to 100 k resistance range at 0.1% best
“R” characteristic 250  to 100 k resistance range at 0.1% best
“R” characteristic 250  to 200 k resistance range at 1% best
Revision: 01-Mar-13
Document Number: 60116
146
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
M83401, C83401
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in inches and millimeters
Part
Number
L
Indicates
Pin 1
Date
Code
Vishay
Logo
G
INCHES
MILLIMETERS
A
0.035
0.89
B
0.040
1.02
C
0.100 ± 0.005 non-accum.
2.54 ± 0.13
D
0.019 ± 0.006 typical
0.48 ± 0.15
E
E
0.187 ± 0.010
4.75 ± 0.25
F
0.135
3.43
F
G
0.095
2.41
A
B
H
C
DIMENSION
D
H
0.012 ± 0.004
0.31 ± 0.10
L (6 Pins)
0.583 - 0.023/+ 0.01
14.81 - 0.584/+ 0.254
L (8 Pins)
0.783 - 0.023/+ 0.01
19.89 - 0.584/+ 0.254
L (10 Pins)
0.983 - 0.023/+ 0.01
24.97 - 0.584/+ 0.254
CONSTRUCTION
High Purity
Alumina Substrate
Sputtered
Film System
Gold Plated
Copper Leads
Gold to Gold
Thermo-Compression Bond
(No Internal Solder)
MECHANICAL SPECIFICATIONS
Resistive Element
TAMELOX passivated nichrome
Substrate Material
Alumina
Body Molded
Epoxy
Terminals
Copper alloy
Plating/Solder
Nickel/gold/Sn63 fussed
POWER DERATING
C Schematic (Pin 1 Common Characteristic H)
G Schematic (Isolated Characteristic H)
Low Profile
Low Profile
0.84
0.60
0.54
10 Pin Package
Power Rating (W)
Power Rating (W)
1.08
8 Pin Package
6 Pin Package
10 Pin Package
(Char. R and V)
0.60
0.48
0.36
0.30
Single Resistor
Single Resistor
(Char. R and V)
- 55
+ 25
0
0.12
0.06
Revision: 01-Mar-13
0.12
0.06
+ 70
+ 125 + 150
Ambient Temperature °C
- 55
10 Pin Package
8 Pin Package
6 Pin Package
10 Pin Package
(Char. R and V)
Single Resistor
Single Resistor
(Char. R and V)
0
+ 25
+ 70
+ 125 + 150
Ambient Temperature °C
Document Number: 60116
147
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
M83401, C83401
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: M8340107H1000BCUF
M
8
3
4
0
1
0
7
H
1
0
0
0
B
C
U
F
V
MODEL
(5 digits)
SCHEMATIC
(2 digits)
CHARACTERISTIC
(1 digits)
RESISTANCE
(4 digits)
TOLERANCE
(1 digits)
SCHEMATIC
(1 digits)
PACKAGING
(2 digits)
VENDOR
(1 digits)
M83401
Single
in-line
resistor
network
low profile
07 = 6 pin
08 = 8 pin
09 = 10 pin
H = 50 ppm/°C
V = 50 ppm/°C
5 ppm/°C track
R = 25 ppm/°C
5 ppm/°C track
K = 100 ppm/°C
M = 300 ppm/°C
First 3 digits
are significant
figures and the
last digit specifies
the number of
zeros to follow.
(100  to 100 k)
Examples:
1000 = 100 
1001 = 1000 
B = 0.1 % (3)
D = 0.5 % (3)
F=1%
G=2%
J=5%
C=
Pin 1
common
G=
Isolated
resistors
UF =
Tubed
UI =
100 min, 1 mult
(item single
lot date code)
UP =
100 min.,1 mult
(package unit
single lot date)
V (2) =
Vishay Dale
Thin Film
21 = 6 pin (1)
22 = 8 pin (1)
23 = 10 pin (1)
C83401
Non burn in
screened
network
Notes
(1) No internal solder
(2) “V" is not required for characteristics R, H, and V, it is only required for K and M. Characteristics tolerance equal to or greater than 1 %."
(3) “H” characteristic 100  to 100 k resistance range at 0.1% best
“R” characteristic 250  to 100 k resistance range at 0.1% best
“R” characteristic 250  to 200 k resistance range at 1% best
MODEL
M83401
C83401
SCHEMATIC
07 = 6 pin (RZ070)
08 = 8 pin (RZ080)
09 = 10 pin (RZ090)
21 = 6 pin (RZ210)
22 = 8 pin (RZ220)
23 = 10 pin (RZ230)
CHARACTERISTIC
TOLERANCE
H = 50 ppm/°C
100 to 100K
B, D, F, G, J
V = 50 ppm/°C/
5 ppm/°C track
250 to 100K
B, D, F, G, J
250 to 200K
F, G, J
R = 25 ppm/°C
5 ppm/°C track
250 to 100K
B, D, F, G, J
250 to 200K
F, G, J
100 to 100K
B, D, F, G, J
K = 100 ppm/°C
M = 300 ppm/°C
Revision: 01-Mar-13
RESISTANCE
RANGE
SCHEMATIC
C, G
Document Number: 60116
148
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Contents
VTSRC20-AB, VSSRC20-AB,
VSORC20-AB ....................... 150
VTSRC20-AC, VSSRC20-AC,
VSORC20-AC ....................... 153
RC Networks
VTSRC20-AA, VSSRC20-AA,
VSORC20-AA ....................... 156
VTSRC20-AD, VSSRC20-AD,
VSORC20-AD ....................... 159
VSSRC1284.......................... 162
VR ......................................... 165
VSSX1284............................. 168
VTSRC20-AB, VSSRC20-AB, VSORC20-AB
www.vishay.com
Vishay Dale Thin Film
25 mil or 50 mil Pitch,
Termination Thin Film Surface Mount Resistor/Capacitor Network
FEATURES
• Resistors and capacitors on a single chip
• Saves board space
• Reduces total assembly costs
• Uniform performance characteristics
Actual Size
• Compatible with automatic surface mounting equipment
• UL 94 V-0 flame resistant
Small outline, surface mount, EMI/RFI reduction
• Rugged, molded case construction
If your design calls for the elimination of transmission line
effects on high speed data lines Vishay Thin Film’s
integrated RC network, schematic AB is the answer. The
planar design of our single die thin film networks offer low
noise and predictable component behavior over a wide
frequency range. Care must be taken when choosing
matching networks that their frequency response matches
that of the transmission line. Our product will reduce total
assembly costs through surface mount technology, reduced
component
count
and
improved
performance
characteristics.
Available packages SOIC, SSOP and TSSOP.
• Compliant to RoHS Directive 2002/95/EC
TYPICAL PERFORMANCE
RESISTOR
CAPACITOR
19
18
TOL.
200
10
TCC
TOL.
200
20
STANDARD VALUES
SCHEMATIC AB
20
TCR
MODELS
17
16
15
14
13
12
11
VSORC
VSSRC
R ()
C (pF)
47
33
VTSRC
X
1
2
3
4
5
6
7
8
9
10
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
CONDITIONS
Tantalum nitride on silicon
-
Pin/Lead Number
20
-
Resistance Range
10  to 750 
-
TCR: Absolute
± 200 ppm/°C
0 °C to + 70 °C
Material
TCR: Tracking
Tolerance: Absolute
Power Rating: Resistor
Power Rating: Package
Stability: Ratio
Operating Temperature Range
Storage Temperature Range
Capacitance Range
ESD Protection
Breakdown Voltage
Revision: 08-Sep-11
± 10 ppm/°C
-
± 10 % standard (R), ± 20 % standard (C)
At 1 MHz and VRMS over + 10 °C to + 70 °C
100 mW
-
(T)SSOP: 1 W
SOIC: 1.2 W
See derating curve
±2%
1000 h at + 70 °C
0 °C to + 70 °C
-
- 55 °C to + 125 °C
-
10 pF to 150 pF for TSSOP
10 pF to 250 pF for SOIC/SSOP
-
> 2 kV
MIL-STD-883, method 3015
35 V to 50 V
-
150
Document Number: 60084
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTSRC20-AB, VSSRC20-AB, VSORC20-AB
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches and millimeters
B
C
Model
RES/CAP
Date
Code
E
x x x x x
xxx/xxx
x xx x
H
F
G
Pin #1
A
J
W
D
DIMENSION
JEDEC M0-153AC, VTSRC20-AB
JEDEC M0-137AD, VSSRC20-AB
JEDEC MS-013AC, VSORC20-AB
INCHES
MILLIMETERS
INCHES
MILLIMETERS
INCHES
MILLIMETERS
A
0.256 ± 0.003
6.5 ± 0.08
0.344 max.
8.74 max.
0.500 ± 0.010
12.7 ± 0.25
B (ref.)
0.025
0.65
0.025
0.64
0.050
1.27
C (ref.)
0.0087
0.22
0.010
0.25
0.016
0.41
D
0.004
0.10
0.006
0.15
0.008
0.20
E (typ.)
0.024
0.61
0.025
0.64
0.030
0.76
F
0.173 ± 0.003
4.39 ± 0.08
0.154 ± 0.003
3.9
0.293 ± 0.003
7.44
G
0.015 x 45°
0.38
0.015 x 45°
0.38
0.025 x 45°
0.64
H
0.252 ± 0.005
6.4 ± 0.13
0.236 ± 0.008
6.0 ± 0.20
0.406 ± 0.005
10.31
J (ref.)
0.005
0.13
0.010
0.25
0.010
0.25
W
0.043 ± 0.005
1.09 ± 0.13
0.064 ± 0.005
1.6
0.100 ± 0.005
2.59
IMPRINTING
VSORC, VSSRC, VTSRC
20
AB
XXX
/
XXX
MODEL
PIN COUNT
SCHEMATIC
RESISTANCE
Code: e.g.
100 = 10 W
/
CAPACITANCE
Code: e.g.
101 = 100 pF
XXXX
Date code
Resistive Element
Tantalum nitride
Substrate Material
Silicon
Body
Molded epoxy
Terminals
Copper alloy
Plating
100 % matte Sn
Lead Coplanarity
Marking Resistance to
Solvents
DERATING CURVE
Precent of Rated Power
MECHANICAL SPECIFICATIONS
Optional marking
0.0005"
100
80
60
40
20
0
- 50
Permanency testing per
MIL-STD-202, method 215
0
25
70
125
150
Ambient Temperature °C
PACKAGING INFORMATION
MODEL
LEADS
TAPE AND REEL
TUBES
JEDEC M0-153AC, VTSRC (TSSOP)
20
2500
74
JEDEC M0-137AD, VSSRC (SSOP)
20
2500
55
JEDEC MS-013AC, VSORC (SOIC)
20
1000
38
Revision: 08-Sep-11
151
Document Number: 60084
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTSRC20-AB, VSSRC20-AB, VSORC20-AB
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: VSORC20AB330470TF
V
S
O
R
C
GLOBAL MODEL
VSORC
VTSRC
VSSRC
2
0
A
B
3
3
0
4
7
0
T
NUMBER OF LEADS/
SCHEMATICS
RESISTANCE AND TOLERANCE/
CAPACITANCE AND TOLERANCE
20AB
xxxyyy
UF = TUBED
First 2 digits are significant figures.
Last digit specifies number of
zeros to follow.
TAPE AND REEL
TF = Full reels
F
PACKAGING
K = 10 % resistance tol. fixed
M = 20 % capacitor tol. fixed
Historical Part Number Example: VSORC20AB330K470MT/R (for reference purposes only)
VSORC
20
AB
330K
470M
T/R
MODEL
NUMBER
OF LEADS
SCHEMATIC
RESISTANCE
TOLERANCE
PACKAGING
Revision: 08-Sep-11
152
Document Number: 60084
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTSRC20-AC, VSSRC20-AC, VSORC20-AC
www.vishay.com
Vishay Dale Thin Film
25 mil or 50 mil Pitch,
Termination Thin Film Surface Mount Resistor/Capacitor Network
FEATURES
• Resistors and capacitors on a single chip
• Saves board space
• Reduces total assembly costs
• Uniform performance characteristics
• Compatible with automatic surface mounting equipment
• UL 94 V-0 flame resistant
Actual Size
• Rugged, molded case construction
• Compliant to RoHS Directive 2002/95/EC
Small outline, surface mount, EMI/RFI reduction, terminator networks
TYPICAL PERFORMANCE
Vishay Thin Film’s termination RC network Schematic AC,
can support 18 data lines reducing overall cost. Impedance
matching of transmission lines is easily done using VTF thin
film integrated RC networks. Our product is designed with
all components integrated within a single die. It is then
packaged in JEDEC standard plastic packages. The use of
surface mount technology offers improved design capability
through reduced parasitic inductance and capacitance.
Available packages SOIC, SSOP and TSSOP.
RESISTOR
CAPACITOR
TCR
TOLERANCE
200
10
TCC
TOLERANCE
200
20
STANDARD VALUES
MODELS
SCHEMATIC AC
20
19
18
VSORC
17
16
15
14
13
12
VSSRC
VTSRC
R ()
C (pF)
50
220
50
250
X
11
X
X
X
1
2
3
4
5
6
7
8
9
75
56
100
100
10
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
CONDITIONS
Tantalum nitride on silicon
-
Pin/Lead Number
20
-
Resistance Range
10  to 750 
-
TCR: Absolute
± 200 ppm/°C
0 °C to + 70 °C
Material
TCR: Tracking
± 10 ppm/°C
-
± 10 % standard (R), ± 20 % standard (C)
At 1 MHz and VRMS over + 10 °C to + 70 °C
Power Rating: Resistor
100 mW
-
Power Rating: Package
(T)SSOP: 1 W, SOIC: 1.2 W
See derating curve
±2%
1000 h
Tolerance: Absolute
Stability: Ratio
Operating Temperature Range
Storage Temperature Range
Capacitance Range
ESD Protection
Breakdown Voltage
Revision: 09-Sep-11
0 °C to + 70 °C
-
- 55 °C to + 125 °C
-
TSSOP: 10 pF to 150 pF, SOIC/SSOP: 10 pF to 250 pF
-
> 2 kV
MIL-STD-883, method 3015
35 V to 50 V
-
Document Number: 60085
153
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTSRC20-AC, VSSRC20-AC, VSORC20-AC
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches and millimeters
B
RES/CAP
C
Model
RES/CAP
Date
Code
E
xxxxx
xxx/xxx
xxxx
H
F
G
Pin 1
A
J
W
D
DIMENSION
A
JEDEC M0-153AC, VTSRC20-AC
JEDEC M0-137AD, VSSRC20-AC
JEDEC MS-013AC, VSORC20-AC
INCHES
MILLIMETERS
INCHES
MILLIMETERS
INCHES
MILLIMETERS
0.256 ± 0.003
6.5 ± 0.08
0.344 max.
8.74 max.
0.500 ± 0.010
12.7 ± 0.25
B (ref.)
0.025
0.65
0.025
0.64
0.050
1.27
C (ref.)
0.0087
0.22
0.010
0.25
0.016
0.41
D
0.004
0.10
0.006
0.15
0.008
0.20
E (typ.)
0.024
0.61
0.025
0.64
0.030
0.76
F
0.173 ± 0.003
4.39 ± 0.08
0.154 ± 0.003
3.9
0.293 ± 0.003
7.44
G
0.015 x 45°
0.38
0.015 x 45°
0.38
0.025 x 45°
0.64
H
0.252 ± 0.005
6.4 ± 0.13
0.236 ± 0.008
6.0 ± 0.20
0.406 ± 0.005
10.31
J (ref.)
0.005
0.13
0.010
0.25
0.010
0.25
W
0.043 ± 0.005
1.09 ± 0.13
0.064 ± 0.005
1.6
0.100 ± 0.005
2.59
IMPRINTING
VSORC, VSSRC, VTSRC
20
MODEL
PIN COUNT
AC
XXX
SCHEMATIC
RESISTANCE
Code: e.g.
100 = 10 
/
XXX
/
CAPACITANCE
Code: e.g.
101 = 100 pF
XXXX
Date code
Resistive Element
Tantalum nitride
Substrate Material
Silicon
Body
Molded epoxy
Terminals
Copper alloy
Plating
100 % matte Sn
Lead Coplanarity
Marking Resistance to
Solvents
DERATING CURVE
Precent of Rated Power
MECHANICAL SPECIFICATIONS
Optional marking
0.0005"
100
80
60
40
20
0
Permanency testing per
MIL-STD-202, method 215
- 50
0
25
70
125
150
Ambient Temperature °C
PACKING INFORMATION
MODEL
LEADS
TAPE AND REEL
TUBES
JEDEC M0-153AC, VTSRC (TSSOP)
20
2500
74
JEDEC M0-137AD, VSSRC (SSOP)
20
2500
55
JEDEC MS-013AC, VSORC (SOIC)
20
1000
38
Revision: 09-Sep-11
Document Number: 60085
154
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTSRC20-AC, VSSRC20-AC, VSORC20-AC
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: VSSRC20AC330470TF
V
S
S
R
C
GLOBAL MODEL
VSSRC
VTSRC
VSORC
2
0
A
C
3
3
0
4
7
0
T
NUMBER OF LEADS/
SCHEMATICS
RESISTANCE AND TOLERANCE/
CAPACITANCE AND TOLERANCE
PACKAGING
20AC
xxxyyy
UF = TUBED
First 2 digits are significant figures.
Last digit specifies number of
zeros to follow.
TAPE AND REEL
TF = Full reels
F
K = 10 % resistance tol. fixed
M = 20 % capacitor tol. fixed
Historical Part Number example: VSSRC20AC330K470MT/R (for reference purposes only)
VSSRC
20
AC
330K
470M
T/R
MODEL
NUMBER
OF LEADS
SCHEMATIC
RESISTANCE
TOLERANCE
PACKAGING
Revision: 09-Sep-11
Document Number: 60085
155
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTSRC20-AA, VSSRC20-AA, VSORC20-AA
www.vishay.com
Vishay Dale Thin Film
25 mil or 50 mil Pitch,
T-Filter Thin Film Surface Mount Resistor/Capacitor Network
FEATURES
• Resistors and capacitors on a single chip
• Saves board space
• Reduces total assembly costs
• Uniform performance characteristics
• UL 94 V-0 flame resistant
• Rugged, molded case construction
Actual Size
• VTSRC - JEDEC M0-153AC
VSSRC - JEDEC M0-137AD
VSORC - JEDEC MS-013AC
Small outline, surface mount, EMI/RFI reduction
Vishay Thin Film’s T-filter network is an integrated thin film
network on a single die. Noise suppression is at a maximum
with the use of thin film technology. The T-filter network,
schematic AA is designed to suppress EMI/RFI noise with
such applications as I/O ports of personal computers and
peripherals, workstations and local area networks. With a
rugged molded case to protect the circuit from the
environment and an integrated thin film network this product
is your choice when reduced size, improved accuracy and
surface mount capability are your goals.
Available packages SOIC, SSOP and TSSOP.
• Compliant to RoHS Directive 2002/95/EC
TYPICAL PERFORMANCE
19
18
CAPACITOR
17
16
15
14
13
12
2
3
200
10 %
TCC
TOLERANCE
200
20 %
MODELS
11
VSORC
1
TOLERANCE
STANDARD VALUES
SCHEMATIC AA
20
RESISTOR
TCR
4
5
6
7
8
9
R ()
C (pF)
X
10
100
X
25
200
100
390
VSSRC
VTSRC
X
10
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
SPECIFICATIONS
CONDITIONS
Tantalum nitride on silicon
-
Pin/Lead Number
20
-
Resistance Range
10  to 750 
-
TCR: Absolute
± 200 ppm/°C
0 °C to + 70 °C
TCR: Tracking
± 10 ppm/°C
-
± 10 % standard (R), ± 20 % standard (C)
At 1 MHz and VRMS over + 10 °C to + 70 °C
Tolerance: Absolute
Power Rating: Resistor
100 mW
-
Power Rating: Package
(T)SSOP: 1 W, SOIC: 1.2 W
See derating curve
±2%
1000 h
Stability: Ratio
Operating Temperature Range
Storage Temperature Range
Capacitance Range
ESD Protection
Breakdown Voltage
Revision: 09-Sep-11
0 °C to + 70 °C
-
- 55 °C to + 125 °C
-
TSSOP: 10 pF to 150 pF, SOIC/SSOP: 10 pF to 250 pF
-
> 2 kV
MIL-STD-883, method 3015
35 V to 50 V
-
Document Number: 60083
156
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTSRC20-AA, VSSRC20-AA, VSORC20-AA
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches and millimeters
B
C
Model
RES/CAP
Date Code
RES/CAP
E
xxxxx
xxx/xxx
xxxx
F
Pin #1
A
H
G
J
W
D
DIMENSION
A
JEDEC M0-153AC, VTSRC20-AA
JEDEC M0-137AD, VSSRC20-AA
JEDEC MS-013AC, VSORC20-AA
INCHES
MILLIMETERS
INCHES
MILLIMETERS
INCHES
MILLIMETERS
0.256 ± 0.003
6.5 ± 0.08
0.344 max.
8.74 max.
0.500 ± 0.010
12.7 ± 0.25
B (ref.)
0.025
0.65
0.025
0.64
0.050
1.27
C (ref.)
0.0087
0.22
0.010
0.25
0.016
0.41
D
0.004
0.10
0.006
0.15
0.008
0.20
E (typ.)
0.024
0.61
0.025
0.64
0.030
0.76
F
0.173 ± 0.003
4.39 ± 0.08
0.154 ± 0.003
3.9
0.293 ± 0.003
7.44
G
0.015 x 45°
0.38
0.015 x 45°
0.38
0.025 x 45°
0.64
H
0.252 ± 0.005
6.4 ± 0.13
0.236 ± 0.008
6.0 ± 0.20
0.406 ± 0.005
10.31
J (ref.)
0.005
0.13
0.010
0.25
0.010
0.25
W
0.043 ± 0.005
1.09 ± 0.13
0.064 ± 0.005
1.6
0.100 ± 0.005
2.59
IMPRINTING
VSORC, VSSRC, VTSRC
20
MODEL
PIN COUNT
AA
XXX
SCHEMATIC
RESISTANCE
Code: e.g.
100 = 10 W
/
XXX
/
CAPACITANCE
Code: e.g.
101 = 100 pF
XXXX
Date code
Resistive Element
Tantalum nitride
Substrate Material
Silicon
Body
Molded epoxy
Terminals
Copper alloy
Plating
100 % matte Sn
Lead Coplanarity
Marking Resistance to
Solvents
DERATING CURVE
Precent of Rated Power
MECHANICAL SPECIFICATIONS
Optional marking
0.0005"
100
80
60
40
20
0
Permanency testing per
MIL-STD-202, method 215
- 50
0
25
70
125
150
Ambient Temperature °C
PACKING INFORMATION
MODEL
LEADS
TAPE AND REEL
TUBES
JEDEC M0-153AC, VTSRC (TSSOP)
20
2500
74
JEDEC M0-137AD, VSSRC (SSOP)
20
2500
55
JEDEC MS-013AC, VSORC (SOIC)
20
1000
38
Revision: 09-Sep-11
Document Number: 60083
157
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTSRC20-AA, VSSRC20-AA, VSORC20-AA
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: VTSRC20AA330470TF
V
T
S
R
C
GLOBAL MODEL
VTSRC
VSSRC
VSORC
2
0
A
A
3
3
0
4
7
0
T
NUMBER OF LEADS/
SCHEMATICS
RESISTANCE AND TOLERANCE/
CAPACITANCE AND TOLERANCE
20AA
xxxyyy
UF = TUBED
First 2 digits are significant figures.
Last digit specifies number of
zeros to follow.
TAPE AND REEL
TF = Full reels
F
PACKAGING
K = 10 % resistance tol. fixed
M = 20 % capacitor tol. fixed
Historical Part Number example: VTSRC20AA330K470MT/R (for reference purposes only)
VTSRC
20
AA
330K
470M
T/R
MODEL
NUMBER
OF LEADS
SCHEMATIC
RESISTANCE
TOLERANCE
PACKAGING
Revision: 09-Sep-11
Document Number: 60083
158
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTSRC20-AD, VSSRC20-AD, VSORC20-AD
www.vishay.com
Vishay Dale Thin Film
25 mil or 50 mil Pitch,
T-Filter Thin Film Surface Mount Resistor/Capacitor Network
FEATURES
• Resistors and capacitors on a single chip
• Saves board space
• Reduces total assembly costs
• Uniform performance characteristics
Actual Size
• Compatible with automatic surface mo unting equipment
• UL 94 V-0 flame resistant
Small outline, surface mount, EMI/RFI reduction, T-filter networks
Vishay Thin Film’s schematic AD is designed as an 8
channel filter for use with personal computer and peripheral
110 ports such as SCSI ports. The use of single die
technology for filtering minimizes space and allows for more
freedom in routing. With a rugged molded case to protect
the circuit from the environment and an integrated thin film
network this product is your choice when reduced size,
improved accuracy and surface mount capability are your
goals.
Available packages SOIC, SSOP and TSSOP.
• Rugged, molded case construction
• Compliant to RoHS Directive 2002/95/EC
TYPICAL PERFORMANCE
RESISTOR
CAPACITOR
TCR
TOLERANCE
200
10
TCC
TOLERANCE
200
20
SCHEMATIC AD
20
19
18
17
16
15
14
13
12
11
STANDARD VALUES
MODELS
VSORC
VSSRC
R ()
C (pF)
33
47
VTSRC
X
1
2
3
4
5
6
7
8
9
10
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
CONDITIONS
Tantalum nitride on silicon
-
Pin/Lead Number
20
-
Resistance Range
10  to 750 
-
TCR: Absolute
± 200 ppm/°C
0 °C to + 70 °C
TCR: Tracking
± 10 ppm/°C
-
± 10 % standard (R), ± 20 % standard (C)
At 1 MHz and VRMS over + 10 °C to + 70 °C
Power Rating: Resistor
100 mW
-
Power Rating: Package
(T)SSOP: 1 W, SOIC: 1.2 W
See derating curve
±2%
1000 h
0 °C to + 70 °C
-
Material
Tolerance: Absolute
Stability: Ratio
Operating Temperature Range
Storage Temperature Range
Capacitance Range
ESD Protection
Breakdown Voltage
Revision: 09-Sep-11
- 55 °C to + 125 °C
-
TSSOP: 10 pF to 150 pF, SOIC/SSOP: 10 pF to 250 pF
-
> 2 kV
MIL-STD-883, method 3015
35 V to 50 V
-
Document Number: 60086
159
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTSRC20-AD, VSSRC20-AD, VSORC20-AD
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches and millimeters
B
RES/CAP
C
Model
RES/CAP
Date
Code
E
xxxxx
xxx/xxx
xxxx
H
F
Pin 1
A
G
J
W
D
DIMENSION
A
JEDEC M0-153AC, VTSRC20-AD
JEDEC M0-137AD, VSSRC20-AD
JEDEC MS-013AC, VSORC20-AD
INCHES
MILLIMETERS
INCHES
MILLIMETERS
INCHES
MILLIMETERS
0.256 ± 0.003
6.5 ± 0.08
0.344 max.
8.74 max.
0.500 ± 0.010
12.7 ± 0.25
B (ref.)
0.025
0.65
0.025
0.64
0.050
1.27
C (ref.)
0.0087
0.22
0.010
0.25
0.016
0.41
D
0.004
0.10
0.006
0.15
0.008
0.20
E (typ.)
0.024
0.61
0.025
0.64
0.030
0.76
F
0.173 ± 0.003
4.39 ± 0.08
0.154 ± 0.003
3.9
0.293 ± 0.003
7.44
G
0.015 x 45°
0.38
0.015 x 45°
0.38
0.025 x 45°
0.64
H
0.252 ± 0.005
6.4 ± 0.13
0.236 ± 0.008
6.0 ± 0.20
0.406 ± 0.005
10.31
J (ref.)
0.005
0.13
0.010
0.25
0.010
0.25
W
0.043 ± 0.005
1.09 ± 0.13
0.064 ± 0.005
1.6
0.100 ± 0.005
2.59
IMPRINTING
VSORC, VSSRC, VTSRC
20
MODEL
PIN COUNT
AD
XXX
SCHEMATIC
RESISTANCE
Code: e.g.
100 = 10 
/
XXX
/
CAPACITANCE
Code: e.g.
101 = 100 pF
XXXX
Date code
Resistive Element
Tantalum nitride
Substrate Material
Silicon
Body
Molded epoxy
Terminals
Copper alloy
Plating
100 % matte Sn
Lead Coplanarity
Marking Resistance to
Solvents
DERATING CURVE
Precent of Rated Power
MECHANICAL SPECIFICATIONS
Optional marking
0.0005"
100
80
60
40
20
0
Permanency testing per
MIL-STD-202, method 215
- 50
0
25
70
125
150
Ambient Temperature °C
PACKING INFORMATION
MODEL
LEADS
TAPE AND REEL
TUBES
JEDEC M0-153AC, VTSRC (TSSOP)
20
2500
74
JEDEC M0-137AD, VSSRC (SSOP)
20
2500
55
JEDEC MS-013AC, VSORC (SOIC)
20
1000
38
Revision: 09-Sep-11
Document Number: 60086
160
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTSRC20-AD, VSSRC20-AD, VSORC20-AD
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: VTSRC20AD330470TF
V
T
S
R
C
GLOBAL MODEL
VSSRC
VTSRC
VSORC
2
0
A
D
3
3
0
4
7
0
T
F
NUMBER OF LEADS/
SCHEMATICS
RESISTANCE AND TOLERANCE/
CAPACITANCE AND TOLERANCE
PACKAGING
20AD
xxxyyy
UF = TUBED
First 2 digits are significant figures.
Last digit specifies number of
zeros to follow.
TAPE AND REEL
TF = Full reels
K = 10 % resistance tol. fixed
M = 20 % capacitor tol. fixed
Historical Part Number example: VTSRC20AD330K470MT/R (for reference purposes only)
VTSRC
20
AD
330K
470M
T/R
MODEL
NUMBER
OF LEADS
SCHEMATIC
RESISTANCE
TOLERANCE
PACKAGING
Revision: 09-Sep-11
Document Number: 60086
161
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VSSRC1284
www.vishay.com
Vishay Dale Thin Film
25 mil Pitch Thin Film Surface Mount Resistor/Capacitor Network
FEATURES
• Rugged, molded case construction
JEDEC MO-137AD
• Reduces total assembly costs
• Saves board space
• Compatible with automatic surface mounting
equipment
• Uniform performance characteristics
• Resistors and capacitors on a single chip
• UL 94 V-0 flame resistant
• Compliant to RoHS Directive 2002/95/EC
• Halogen-free according to IEC 61249-2-21 definition
TYPICAL PERFORMANCE
Actual Size
IEEE 1284 parallel port termination network
RESISTOR
CAPACITOR
TCR
TOLERANCE
200
10
TCC
TOLERANCE
200
20
SCHEMATIC
20
19
R2
18
R2
R1
R2
R1
1
17
R2
R1
2
16
R2
R1
3
15
R2
R1
4
14
R2
R1
5
13
R2
R1
6
12
R2
R1
7
11
R1
8
9
10
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
SPECIFICATIONS
CONDITIONS
Tantalum nitride
-
20
-
Resistance Range
10  to 10 k
-
TCR: Absolute
± 200 ppm/°C
-
Pin/Lead Number
TCR: Tracking
-
-
± 10 % (R1 and R2), ± 20 % (C)
At 1 MHz and VRMS over + 10 °C to + 70 °C
Power Rating: Resistor
100 mW
-
Power Rating: Package
1W
-
Stability: Ratio
-
-
Operating Temperature Range
-
-
Storage Temperature Range
-
-
27 pF to 220 pF
Based on number of resistors
> 2 kV
MIL-STD-883, method 3015
25 V
-
Tolerance: Absolute
Capacitance Range
ESD Protection
Breakdown Voltage
Revision: 20-Oct-11
Document Number: 60077
162
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VSSRC1284
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches and millimeters
MODEL VSSRC1284
DIMENSION
B
Part
Number
Date
Code
INCHES
C
VSSRC
1284
E
H
F
Pin 1
MINIMUM
MAXIMUM
A
0.344 max.
8.74 max.
B (ref.)
0.025
0.64
C (ref.)
0.010
0.25
D
0.006
0.15
E (typ.)
0.025
0.64
F
0.154 ± 0.003
3.85 ± 0.08
G
0.015 x 45°
0.38 x 45°
H
0.236 ± 0.008
5.9 ± 0.20
G
A
J
W
D
J (ref.)
0.010
0.25
W
0.064 ± 0.005
1.64 ± 0.13
Note
• Mold flash not included in body dimensions
IMPRINTING
VSSRC1284-X
Date code
-X = Molded version number from table below
Resistive Element
Tantalum nitride
Substrate Material
Silicon
Body
Terminals
Plating
Lead Coplanarity
Marking Resistance to
Solvents
Molded epoxy
Copper alloy
100 % matte Sn
0.0005"
DERATING CURVE
Precent of Rated Power
MECHANICAL SPECIFICATIONS
100
80
60
40
20
0
- 50
Permanency testing per
MIL-STD-202, method 215
0
25
70
125
150
Ambient Temperature °C
STANDARD VALUES
AVAILABLE MODELS
R1 ± 10 % ()
R2 ± 10 % ()
C ± 20 % (pF)
VSSRC1284-1
2.2K
33
220
VSSRC1284-2
4.7K
33
180
VSSRC1284-3
1K
33
180
VSSRC1284-4
4.7K
10
180
VSSRC1284-5
4.7K
27
33
VSSRC1284-6
4.7K
270
33
VSSRC1284-7
10K
10
27
Revision: 20-Oct-11
Document Number: 60077
163
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VSSRC1284
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: VSSRC1284-1TF
V
S
S
R
C
1
2
GLOBAL MODEL
VALUE
VSSRC1284
-1
-2
-3
-4
-5
-6
-7
8
4
-
1
T
F
PACKAGING
UF = TUBED
TAPE AND REEL
TF = Full reels
Historical Part Number example: VSSRC1284-1T/R (for reference purposes only)
VSSRC1284
-1
T/R
MODEL
VALUE
PACKAGING
Revision: 20-Oct-11
Document Number: 60077
164
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VR
www.vishay.com
Vishay Dale Thin Film
Molded, SOT-23 Thin Film
Surface Mount Resistor/Capacitor Network
FEATURES
• Resistor and capacitor integrated into a Thin
Film network
• Filters at the source of emissions
• More consistent performance characteristics
than discretes
• Compliant to RoHS Directive 2002/95/EC
• Halogen-free according to IEC 61249-2-21 definition
Vishay’s R/C Network, packaged in the standard SOT-23,
can be strategically placed on your PC board to do localized
filtering. The R/C Network can be located at the point of
emission before transients are carried through the design.
The sophisticated process of integrating the Resistor and
Capacitor on a single substrate provides you with higher
performance and more consistent results over discrete
components. A real estate savings will also be gained.
Applications include EMI/RFI suppression and AC
termination. These networks, in the SOT-23, along with
Vishay’s high component count R Networks and R/C
Networks in a variety of standard IC packages, provides you
with the exact solution for your redesign or new design.
Visit our website for the total picture on available R
Networks and R/C Networks from our guaranteed stock
program.
TYPICAL PERFORMANCE
RESISTOR
CAPACITOR
3
SCHEMATIC
3
C
R
1
C
R
R
2
D
Tapped Filter
1
2
C
AC Termination
200
10
TCC
TOLERANCE
200
20
R ()
C (pF)
D
33
47
C
47
47
A
100
80
Note
• Consult application engineering for custom values
C
C
TOLERANCE
VR TOOLED VALUES (1)
SCHEMATIC
3
TCR
R
R
2
1
A
T Filter
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
CONDITIONS
Tantalum nitride
-
Pin/Lead Number
3
-
Resistance Range
10  to 500 
-
TCR: Absolute
± 200 ppm/°C
0 °C to + 70 °C
Material
TCR: Tracking
Tolerance: Absolute
-
-
± 10 % standard (R), ± 20 % standard (C)
At 1 MHz and VRMS over + 10 °C to + 70 °C
Power Rating: Resistor
100 mW
-
Power Rating: Package
1W
at + 70 °C
-
-
Stability: Ratio
Operating Temperature Range
Storage Temperature Range
Capacitance Range
ESD Protection
Breakdown Voltage
Revision: 20-Oct-11
0 °C to + 70 °C
-
- 55 °C to + 125 °C
-
10 pF to 80 pF
-
-
-
25 V to 45 V
-
Document Number: 60088
165
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VR
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches and millimeters
3
W
B
T
A
S
H L
A1
K
J
2
1
Ø
JEDEC STANDARD TO-236
DIMENSION
INCHES
MINIMUM
MILLIMETERS
MAXIMUM
MINIMUM
MAXIMUM
A
0.027
0.040
0.70
1.02
A1
0.001
0.004
0.02
0.15
B
0.105
0.120
2.67
3.04
S
0.071
0.079
1.80
2.00
W
0.015
0.021
0.38
0.54
L
0.083
1.03
2.10
2.64
H
0.047
0.055
1.20
1.40
T
0.050
0.157
0.13
0.40
J
0.003
0.008
0.089
0.15
K
0.017
0.022
0.44
0.55
Ø
0
8°
0
8°
IMPRINTING
SCHEMATIC
VRA
AA
VRC
AC
VRD
AD
MECHANICAL SPECIFICATIONS
Tantalum nitride
Capacitive Material
Thin film
Substrate Material
Silicon
Body
Terminals
Plating
Molded epoxy
Copper alloy
100 % matte Sn
Lead Coplanarity
Marking Resistance to
Solvents
Precent of Rated Power
Resistive Element
DERATING CURVE
100
80
60
40
20
0
0.0005"
Permanency testing per
MIL-STD-202, method 215
- 50
0
25
70
125
150
Ambient Temperature °C
PACKAGING INFORMATION
MODEL
VR
Revision: 20-Oct-11
LEADS
TAPE AND REEL
3
3000
Document Number: 60088
166
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VR
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: VRD330K470MTF
V
R
D
3
3
GLOBAL MODEL
SCHEMATICS
VR
D = Tapped filter
C = AC termination
A = T filter
0
K
4
7
0
M
T
F
RESISTANCE AND TOLERANCE/
CAPACITANCE AND TOLERANCE
PACKAGING
xxxK/yyyM
UF = TUBED
First 2 digits are significant figures. Last
digit specifies number of zeros to follow
e.g.
330K/470M = 330 W 10 % 47 pF 20 %
K = 10 %
M = 20 %
TAPE AND REEL
TF = Full reels
Historical Part Number example: VRD330K479MT/R (for reference purposes only)
VR
D
330K
470M
T/R
MODEL
SCHEMATIC
RESISTANCE
TOLERANCE
PACKAGING
Revision: 20-Oct-11
Document Number: 60088
167
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VSSX1284
www.vishay.com
Vishay Dale Thin Film
25 mil Pitch, IEEE 1284 Termination Thin Film
Surface Mount Resistor, Capacitor, Diode
FEATURES
• One sophisticated,
technology solution
integrated
Thin
Film
• Up-graded IEEE 1284 parallel port termination,
pull-up with the addition of diodes for filtering
on the parallel port
• Standard QSOP package (28 pins) - JEDEC MO-137AF
Product is pictured larger than actual size to show detail
• 17 terminating lines
Vishay has upgraded the standard IEEE 1284 Thin Film
technology Network, incorporating diodes for protecting the
inputs/outputs from electro-static discharge (ESD).
• Reduces total cost
• Increase board utilization
• Better performance over discretes
The sophisticated circuit is housed in a standard QSOP,
28-pin package.
• Compliant to RoHS Directive 2002/95/EC
Uses include ECP/EPP parallel port terminations for PC
peripherals, notebooks, desktops, workstations and
servers. This is a guaranteed stock part.
SCHEMATIC
GND
28
R1
R1
27
R1
R1
26
25
R1
R1
R2
1
24
2
R1
R2
3
23
R1
R2
4
VCC
22 21
20
19
R1
R2
5
R1
R1
R2
6
18
R1
R2
7
8
17
R1
R1
R1
R2
9
10
16
R1
R2
11
15
12
R1
R2
13
14
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
SPECIFICATIONS
CONDITIONS
Polysilicon/thin film on silicon
-
Pin/Lead Number
28
-
Resistance Range
-
-
TCR: Absolute
-
-
TCR: Tracking
-
-
± 10 % (R), ± 20 % (C)
-
Power Rating: Resistor
100 mW
-
Power Rating: Package
1W
-
-
-
Tolerance: Absolute
Stability: Ratio
Operating Temperature Range
Storage Temperature Range
Capacitance Range
ESD Protection
0 °C to + 70 °C
-
- 65 °C to + 150 °C
-
-
-
See table
-
Breakdown Voltage
-
-
Signal clamp voltage
(+) clamp > 6 V; (-) clamp < - 6 V
-
1 μA
Maximum at 25 °C
Maximum leakage current at VCC
Revision: 09-Sep-11
Document Number: 60089
168
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VSSX1284
www.vishay.com
Vishay Dale Thin Film
ESD PROTECTION
MAXIMUM
MINIMUM
+ 8 kV
- 4 kV
+ 15 kV
- 8 kV
Peak Discharge Voltage at any I/O, Human Body Model, Method 3015 (1)
In System Protection HBM
(2)
In System Protection, IEC 1000-4-2, Level 2 (2)(3)
+ 8 kV
- 4 kV
Channel Clamp Voltage at 8 kV ESD Pulses, HBM (1)(2)
+ 30 V
- 30 V
Notes
(1) Human body model per MIL-STD-883, method 3015 C
Discharge = 100 pF, RDischarge = 1.5 k pin 20 at 5 V and pin 22 at ground.
(2) Pin 22 grounded, pin 20 to V
CC all other pins are open. ESD contact discharge between ground and pins 1, 2, 8, 10, 12, 15, 16, 17, 18, 19,
21, 23 through 28, one at a time.
(3) Standard IEC 1000-4-2 with C
Discharge = 150 pF, RDischarge = 330  pin 20 at 5 V and pin 22 at ground.
DIMENSIONS in inches and millimeters
1
E
DIMENSION
INCHES
A
0.068
1.727
A1
0.008
0.203
0.305
H
D
SEATING PLANE
h x 45°
A
C
a°
e
B
L
A1
MILLIMETERS
B
0.012
C
0.010
0.254
D
0.394
10.008
E
0.157
3.988
e
0.025
0.635
H
0.244
6.198
h
0.016
0.406
L
0.038
0.889
a°
8
Note
• Mold flash not included in body dimensions.
JEDEC MO-137 package
MECHANICAL SPECIFICATIONS
R/C Element
STANDARD VALUES
Polysilicon/thin film
Substrate Material
Silicon
Body
Molded epoxy
Terminals
AVAILABLE
MODELS
R1 ()
R2 ()
C (pF)
VSSX1284A
4.7K
33
180
VSSX1284B
2.2K
33
220
Copper alloy
Plating
100 % matte Sn
Lead Coplanarity
0.005"
Marking Resistance to Solvents
MIL-STD-202, method 15
Flammability
UL 94 V-0
GLOBAL PART NUMBER INFORMATION
Global Part Numbering: VSSX1284ATF
V
Revision: 09-Sep-11
S
S
X
1
2
8
4
A
T
GLOBAL MODEL
PACKAGING
VSSX1284A
or
VSSX1284B
UF = TUBED
F
TAPE AND REEL
TF = Full reels
Document Number: 60089
169
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Contents
Quick-Chip Prototype
Service Guide........................ 171
Quick-Net® Prototype
Guidelines ............................. 172
Prototyping
Quick-Net® Prototype
Fax Form............................... 173
E6, E12, E24 and E96 Tables 174
Application Guide .................. 175
Quick-Chip Prototype Service Guide
www.vishay.com
Vishay Dale Thin Film
How To Use Order Via Quick-Chip
1. SALES REPRESENTATIVE OR DISTRIBUTOR
• Receives request for products needing urgent delivery
The main families included in the program are listed below.
However, Quick-Chip service can be requested on any
Vishay Thin Film Resistor.
• Offers Quick-Chip program to customer
• Enters RFQ to Vishay via partners/SAP
• RFQ must include SAP part number of product needed,
quantity required, and desired lead time
Products offered for the 10-day Quick-Chip program:
P-
Thin film precision wraparound chip resistor P ns
series
PTN
Thin film tantalum nitride wraparound chip resistor
2. VISHAY MARKETING
Product offered for the 15-day Quick Chip program:
• Adds Quick-Chip line item lot charge and lead time to
quote
(LOTCHG-VTFQCKCHIP)
M55342 MILITARY QPL CHIP RESISTOR
• Returns RFQ to sales representative or distributor
• Quote is valid for 48 h
3. SALES REPRESENTATIVE OR DISTRIBUTOR
M55342/01
M55342/02
M55342/03
M55342/04
M55342/05
M55342/06
L-
M55342/07
M55342/08
M55342/09
M55342/10
M55342/11
M55342/12
Low value (0.03  to 10 ) wraparound chip resistor
• Delivers quote to customer and obtains a purchase order
• Phones customer service with purchase order and enters
order and faxes PO information
4. CUSTOMER SERVICE
• Enters the order on SAP with reference to the quote
• Contacts Vishay Thin Film planning to ensure capacity
and availability
5. VISHAY THIN FILM PLANNING
• Schedules the order
• Order is built and shipped
Note
• The clock starts when the order is entered on SAP and stops
when product is shipped
Revision: 19-Jan-10
Document Number: 60079
171
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Quick-Net® Prototype
www.vishay.com
Vishay Dale Thin Film
Guidelines
FEATURES
• Custom thin film networks in 2 weeks
• No NRE charges typical
Available
• Available in both moisture resistant tantalum
nitride and passivated nichrome resistor film
Available
• 72 h express on some formats
• Compliant to RoHS Directive 2002/95/EC
Note
* Pb containing terminations are not RoHS compliant, exemptions
may apply
TYPICAL PERFORMANCE
All these packages are standard. Other packages available
on request.
Our superior engineering capabilities enable us to provide
the industry’s shortest delivery for prototypes. Let
Vishay Quick-Net® speed your prototypes to qualification.
Quick-Net high quality networks are available in a variety of
package formats, including single-in-line (SIP), hermetic
DIP, flatpack and leadless chip carriers. The networks are
available with either tantalum nitride or passivated nichrome
resistor film.
TCR
TOL.
ABSOLUTE
TRACKING
25
5
ABSOLUTE
RATIO
0.05
0.02
SCHEMATIC
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
CONDITIONS
Passivated nichrome
-
100  to 55 k/200  to 120 k/400  to 250 k
Based on fil sheet resistance
TCR: Absolute
± 25 ppm/°C
- 55 °C to + 125 °C
TCR: Tracking
± 5 ppm/°C
-
Tolerance: Absolute
± 0.1 % to ± 1.0 %
-
Tolerance: Ratio
± 0.01 % to ± 0.1 %
Values over 1 k
25 mW
-
- 55 °C to + 125 °C
-
Material
Resistance Range
Power Rating: Resistor
Operating Temperature Range
Note
• Consult factory for specifications
ORDERING INFORMATION
Copy, fill out and fax the form on the following page to send your prototype specifications to the Quick-Net team.
Or call (716) 283-4025 to discuss your requirements with a member of the Quick-Net team.
Revision: 30-Jan-07
Document Number: 60078
172
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Quick-Net® Prototype
www.vishay.com
Vishay Dale Thin Film
Fax Form
Custom Thin Film Networks in 2 weeks with no NRE charges
For your Quick-Net Prototype, fill out this form and FAX to Vishay at (716) 283-5932, or call and talk to a Vishay engineer at
(716) 283-4025.
DATE: _____________________________________________________
FROM:
NUMBER OF PAGES: ________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
TO:
Vishay Quick-Net Team
2160 Liberty Dr.
Niagara Falls, NY 14304 USA
_____________________________________________________
_____________________________________________________
PHONE: _____________________________________________________
FAX NO.: (716) 283-59352
FAX:
YOUR PART NUMBER: __________________
Package Type
Package
_____________________________________________________
VISHAY P.N. ______________________________ QUANTITY REQUIRED _________________
Max. Resistors
per Package (2)
Your Resistor
Count
Your Package
Choise
Quantity Required
2 thru 9
_____________________

_____________________
8 PIN Hermetic DIP
10
_____________________

_____________________
14 PIN Hermetic DIP
12
_____________________

_____________________
16 PIN Hermetic DIP
15
_____________________

_____________________
18 PIN Hermetic DIP (20 PIN also available)
12
_____________________

_____________________
14 Lead Flatpack 1/4 x 3/8
8
_____________________

_____________________
14 Lead Flatpack 3/8 x 3/8
12
_____________________

_____________________
16 Lead Flatpack 1/4 x 3/8
12
_____________________

_____________________
Single-In-Line (3 PIN to 10 PIN) (1)
14
_____________________

_____________________
8, 10, 12
_____________________

_____________________
4, 7, 8
_____________________

_____________________
16 Lead Flatpack 3/8 x 3/8
16, 20, 24 Terminal Leadless Chip Carrier
8, 14, 16 PIN Lead Gull Wing SMT
(1)
Notes
(1) 72 h express service available, consult factory.
(2) Resistance range may be expanded by adding resistors in series, however the number of resistors per package will decrease.
SCHEMATIC:
SPECIFICATIONS:
Hand draw your schematic here or attach your drawing.
Identify the reference resistor and ohmic value of each.
Quick-Net’s Best
Best Ratio Tolerance
REFERENCE RESISTOR IS: ___________________________________ Available (over 1 k)
TO: ________________________________________________________ 0.01 %
Your requirements
______________________________________
Best Absolute Tolerance
0.1 %
______________________________________
Revision: 30-Jan-07
Best TCR Tracking
(- 55 °C to + 125 °C)
± 5 ppm/°C
______________________________________
Maximum Wattage:
25 mW per element
______________________________________
Document Number: 60078
173
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
E Tables
www.vishay.com
Vishay Dale Thin Film
E6, E12, E24, and E96
E6
E12
E24
1.0
1.0
1.1
1.2
1.2
1.3
1.5
1.5
1.6
1.8
1.8
2.0
2.2
2.2
2.4
2.7
2.7
3.0
3.3
3.3
3.6
3.9
3.9
4.3
4.7
4.7
5.0
5.6
5.1
5.6
6.8
6.2
6.8
8.2
7.5
8.2
1.0
1.5
2.2
3.3
4.7
6.8
9.1
E96
1.00
1.02
1.05
1.07
1.10
1.13
1.15
1.18
1.21
1.24
1.27
1.30
1.33
1.37
1.40
1.43
1.47
1.50
1.54
1.58
1.62
1.65
1.69
1.74
1.78
1.82
1.87
1.91
1.96
2.00
2.05
2.10
2.15
2.21
2.26
2.32
2.37
2.43
2.49
2.55
2.61
2.67
2.74
2.80
2.87
2.94
3.01
3.09
3.16
3.24
3.32
3.40
3.48
3.57
3.65
3.74
3.83
3.92
4.02
4.12
4.22
4.32
4.42
4.53
4.64
4.75
4.87
4.99
5.11
5.23
5.36
5.49
5.62
5.76
5.90
6.04
6.19
6.34
6.49
6.65
6.81
6.98
7.15
7.32
7.50
7.68
7.87
8.06
8.25
8.45
8.66
8.87
9.09
9.31
9.53
9.76
Revision: 10-Dec-09
Document Number: 60080
174
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Application Guide
www.vishay.com
Vishay Dale Thin Film
Application Guide Form
Vishay Thin Film Reference # ____________________________________________________________________________________________________
Name ___________________________________________________ Title ________________________________________________________________
Company _______________________________________________ Division __________________________ Dept ____________________________
Address ______________________________________________________________________________________________________________________
City ____________________________________________________ State ____________________________ Zip ______________________________
Phone __________________________________________________ Fax ________________________________________________________________
Expected Usage Per Year _________________________________ Timimg: Prototypes _______________ Production _______________________
Application ______________________________________________ Hermetic Sealed
 Yes
 No
Drawing # (attach if possible) _______________________________ Package Choises (DWG #)
1st _____________ 2nd ____________
Special Testing __________________________________________ Operating Temperature Range _________________________________________
Vishay Thin Film’s unique thin film technology can be used
to give the circuit designer a range of technical alternatives
in the development and performance of precision resistor
networks.
SCHEMATIC
If you require a quotation on a specific custom resistor
network, please use the guide below, listing your
requirements of concern. Our engineering expertise,
combined with our state of the art resources and proven
record of performance are available to assist you. We may
be contacted at:
Vishay Thin Film
2160 Liberty Drive
Niagara Falls, NY 14304
Phone(716) 283-4025
Fax(716) 283-5932
RESISTOR
NUMBER
RESISTOR
VALUE
()
Revision: 10-Dec-09
ABSOLUTE
ACCURACY
±%
ABSOLUTE
TCR
± ppm/°C
RATIO
ACCURACY
±%
TCR
± ppm/°C
MAX. VOLTAGE
REFERENCE
RESISTOR
PEAK V
RMS V
POWER
MAX.
W
Document Number: 60090
175
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RESISTORS
Vishay Intertechnology, Inc.
Vishay Dale Thin Film
VSE-DB0024-1309
RESISTORS
Vishay Dale Thin Film
VISHAY PRODUCTS
SEMICONDUCTORS:
Rectifiers • High-Power Diodes and Thyristors • Small-Signal Diodes • Zener and Suppressor Diodes •
FETs • Optoelectronics • ICs • Modules
PASSIVE COMPONENTS:
Resistive Products • Magnetics • Capacitors
Vishay Intertechnology, Inc. | 63 Lancaster Avenue Malvern, PA 19355-2143 | USA
Visit www.vishay.com for product information or select below for a current list of sales offices, representatives,
and distributors.
W O R L D W I D E S A L E S C O N TA C T S
Vishay Intertechnology, Inc.
WORLD HEADQUARTERS
THE AMERICAS
EUROPE
UNITED STATES
GERMANY
VISHAY AMERICAS
ONE GREENWICH PLACE
SHELTON, CT 06484
UNITED STATES
PH: +1-402-563-6866
FAX: +1-402-563-6296
VISHAY ELECTRONIC GMBH
DR.-FELIX-ZANDMAN-PLATZ 1
95100 SELB
GERMANY
PH: +49-9287-71-0
FAX: +49-9287-70435
ASIA
FRANCE
SINGAPORE
VISHAY INTERTECHNOLOGY ASIA PTE LTD.
37A TAMPINES STREET 92 #07-00
SINGAPORE 528886
PH: +65-6788-6668
FAX: +65-6788-0988
VISHAY S.A.
199, BLVD DE LA MADELEINE
06003 NICE, CEDEX 1
FRANCE
PH: +33-4-9337-2727
FAX: +33-4-9337-2726
P.R. CHINA
UNITED KINGDOM
VISHAY CHINA CO., LTD.
15D, SUN TONG INFOPORT PLAZA
55 HUAI HAI WEST ROAD
SHANGHAI 200030
P.R. CHINA
PH: +86-21-5258 5000
FAX: +86-21-5258 7979
VISHAY LTD.
SUITE 6C, TOWER HOUSE
ST. CATHERINE’S COURT
SUNDERLAND ENTERPRISE PARK
SUNDERLAND SR5 3XJ
UNITED KINGDOM
PH: +44-191-516-8584
FAX: +44-191-549-9556
JAPAN
VISHAY JAPAN CO., LTD.
SHIBUYA PRESTIGE BLDG. 4F
3-12-22, SHIBUYA
SHIBUYA-KU
TOKYO 150-0002
JAPAN
PH: +81-3-5466-7150
FAX: +81-3-5466-7160
© Copyright 2013 Vishay Intertechnology, Inc.
® Registered trademarks of Vishay Intertechnology, Inc.
All rights reserved. Printed in Germany. Specifications subject to change without notice.
VSE-DB0024-1309
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO
SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000