PU1 thru PU5

PU1 thru PU5
Surface Mount Glass Passivated Superfast Rectifier
Reverse Voltage 50~600V Forward Current 1A
Features
•
•
•
•
•
•
•
Glass passivated superfast recovery Rectifiers
Low profile, typical thickness 0.8mm
Low forward voltage drop
Low leakage current
Moisture sensitivity: level 1, per J-STD-020
Heatsink structure
High temperature soldering guaranteed: 260℃/10 seconds
iSGA
(SOD-123HS)
Typical Applications
For use of general purpose rectification in lighting, cellular phone, portable device,
power supplies and other consumer applications.
Maximum Ratings
(TA = 25 °C unless otherwise noted)
Parameter
Symbol
PU1
PU2
PU3
PU4
PU5
Unit
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
VRRM
VRMS
VDC
IF(AV)
50
100
200
400
600
V
35
70
140
280
420
V
50
100
200
1
400
600
V
Peak forward surge current 8.3 ms single half sinewave superimposed on rated load
IFSM
30
A
Operating junction and storage temperature range
TJ, TSTG
- 55 to + 150
°C
Electrical Characteristics
(TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol
Maximum instantaneous
1A
forward voltage
Maximum DC reverse current at TA=25℃
rated DC blocking voltage
TA=125℃
IF=0.5A,IR=1.0A,
Maximum reverse recovery time
Irr=0.25A
Typical junction capacitance
4.0 V, 1 MHz
Typical thermal resistance1)
juntion to ambient
juntion to case
juntion to lead
PU1
VF
PU2
PU3
0.95
5.0
IR
100
trr
A
PU4
PU5
Unit
1.3
1.7
Volts
µA
35
nS
CJ
7
pF
RθJA
RθJC
RθJL
90
25
℃/W
18
Note:1),The thermal resistance from junction to ambient,case or lead,mounted on FR-4 P.C.B
www.goodark.com
1/4
2015.10-Rev.A
PU1 thru PU5
Surface Mount Glass Passivated Superfast Rectifier
Reverse Voltage 50~600V Forward Current 1A
Ratings and Characteristics Curves
(TA = 25℃ unless otherwise noted)
Figure 2.Maximum Non-Repetitive Peak
Forward Surge Current
Figure 1.Forward Current Derating Curve
Figure 4. Typical Instantaneous Forward
Characteristics
Figure 3. Typical Reverse Characteristics
Figure 6. Typical Instantaneous Forward
Characteristics (PU5)
Figure 5. Typical Junction Capacitance
www.goodark.com
2/4
2015.10-Rev.A
PU1 thru PU5
Surface Mount Glass Passivated Superfast Rectifier
Reverse Voltage 50~600V Forward Current 1A
Package Outline Dimensions
iSGA
Package
Unit:mm
MIN
MAX
A
0.75
0.90
B
0.85
1.05
B1
0.85
1.05
C
0.1
0.25
D
1.9
2.1
E
2.9
3.1
L1
2.0
2.45
L2
0.4
0.85
L3
1.3
1.7
HE
3.5
3.9
Soldering footprint
Packing Information
Packing quantities:
Reel size
7"
Quantity/reel
3K
Quantity/inner Box
30K
Quantity/Carton
120K
Tape & Reel Specification
www.goodark.com
3/4
2015.10-Rev.A
PU1 thru PU5
Surface Mount Glass Passivated Superfast Rectifier
Reverse Voltage 50~600V Forward Current 1A
Disclaimers
These materials are intended as a reference to assist our customers in the selection of the Suzhou
Good-Ark product best suited to the customer’s application; they do not convey any license under any
intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or
a third party.
Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of
any third-party ’ s rights, originating in the use of any product data, diagrams, charts, programs,
algorithms, or circuit application examples contained in these materials.
All information contained in these materials, including product data, diagrams, charts, programs and
algorithms represents information on products at the time of publication of these materials, and are
subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product
improvements or other reasons. It is therefore recommended that customers contact Suzhou GoodArk Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest
product information before purchasing a product listed herein. The information described here may
contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd.
assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or
errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd.
by various means, including our website home page.
(http://www.goodark.com)
When using any or all of the information contained in these materials, including product data,
diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total
system before making a final decision on the applicability of the information and products. Suzhou
Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss
resulting from the information contained herein.
The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or
reproduce in whole or in part these materials.
Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details
on these materials or the products contained herein.
www.goodark.com
4/4
2015.10-Rev.A