SGC0401A thru SGC0407A Surface Mount Glass Passivated Rectifier Reverse Voltage 50~1000V Forward Current 4A Features • • • • • • • Glass passivated standard rectifiers Ideal for automated placement Low forward voltage drop Low leakage current Moisture sensitivity: level 1, per J-STD-020 Solder dip 260 °C, 10 s Low profile - typical height of 1.1 mm eSGC ((TO‐277) ) Anode Cathode & Heatsink Anode 2 Typical Applications For use of general purpose rectification in lighting, cellular phone, portable device, power supplies, li and d other th consumer applications. li ti Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Symbol SGC0401 A SGC0402 A SGC0403 A SGC0404 A SGC0405 A SGC0406 A SGC0407 Unit A VRRM 50 100 200 400 600 800 VRMS VDC 35 70 140 280 420 560 700 V 50 100 200 400 600 800 1000 V 1000 V Maximum average forward rectified current IF(AV) 4.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 125 A Operating junction and storage temperature range TJ, TSTG - 55 to + 150 °C Electrical Characteristics Parameter Test Conditions Maximum instantaneous forward IF=4 A ,TA=25℃ voltage Maximum DC reverse TA=25℃ current at rated DC blocking voltage TA=125℃ Typical T i l reverse recovery time Typical junction capacitance Typical thermal 1) resistance IF=0.5A,I =0 5A IR=1.0A, =1 0A Irr=0.25A 4.0 V, 1 MHz Symbol (TA = 25 °C unless otherwise noted) SGC0401 A SGC0402 A SGC0403 A SGC0404 A 1.1 VF SGC0405 A SGC0406 A SGC0407 Unit A Volts 10 IR µA 250 trr 3 uS CJ 25 pF juntion to mount RθJM 5 juntion to ambient RθJA 35 ℃/W Notes: 1)Thermal resistance RθJM is junction to mount.Mounted on P.C.B with 30*30mm copper pad area www.goodark.com 1/4 2014.06-Rev.A SGC0401A thru SGC0407A Surface Mount Glass Passivated Rectifier Reverse Voltage 50~1000V Forward Current 4A Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 1. Typical Instantaneous Forward Characteristics Figure 2.Maximum Non‐Repetitive Peak Forward Surge Current Figure 3. Typical Reverse Characteristics Figure 4. Typical Junction Capacitance Figure 5.Forward Current Derating Curve www.goodark.com 2/4 2014.06-Rev.A SGC0401A thru SGC0407A Surface Mount Glass Passivated Rectifier Reverse Voltage 50~1000V Forward Current 4A Package Outline Dimensions Soldering footprint Packing Information Packing quantities: 5000 pcs/Reel，12mm Tape, 13" Reel Tape & Reel Specification www.goodark.com 3/4 2014.06-Rev.A SGC0401A thru SGC0407A Surface Mount Glass Passivated Rectifier Reverse Voltage 50~1000V Forward Current 4A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Good Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party ’ s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, materials including product data, data diagrams, diagrams charts, charts programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou GoodArk Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility ibilit for f any damage, d liability, li bilit or other th loss l rising i i f from these th inaccuracies i i or errors. Please Pl also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, g p g g diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2014.06-Rev.A