SML SERIES TRANSIENT ABSORPTION ZENER DIODES High-reliability discrete products and engineering services since 1977 FEATURES Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix. For bi-directional indicate a C or CA suffix after the part number (i.e. SMLJ5.0C or SMLJ5.0CA) MAXIMUM RATINGS Rating Value Peak power dissipation 3000W at 10/1000µs (see fig. 1, 2 & 3) Tclamping (0 V to V(BR) min) < 1x 10-12 seconds Forward surge rating 200 amps, 1/120 seconds @ 25°C(excluding bidirectional) Operating and storage temperature range -65° to 150°C ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) Part number Modified “J” bend lead Reverse standoff voltage (1) Breakdown voltage V(BR) @ IT VWM IT Maximum clamping voltage @ IPP Peak pulse current IPP Maximum reverse leakage @ VWM ID VOLTS MIN MAX mA VOLTS AMPS µA SMLJ5.0A 5.0 6.40 7.00 10 9.2 326.0 1000 SMLJ6.0A 6.0 6.67 7.37 10 10.3 291.3 1000 SMLJ6.5A 6.5 7.22 7.98 10 11.2 267.9 500 SMLJ7.0A 7.0 7.78 8.60 10 12.0 250.0 200 SMLJ7.5A 7.5 8.33 9.21 1 12.9 232.6 100 SMLJ8.0A 8.0 8.89 9.83 1 13.6 220.6 50 SMLJ8.5A 8.5 9.44 10.4 1 14.4 208.4 25 SMLJ9.0A 9.0 10.0 11.1 1 15.4 194.8 10 SMLJ10A 10 11.1 12.3 1 17.0 176.4 5 SMLJ11A 11 12.2 13.5 1 18.2 164.8 5 SMLJ12A 12 13.3 14.7 1 19.9 150.6 5 SMLJ13A 13 14.4 15.9 1 21.5 139.4 5 SMLJ14A 14 15.6 17.2 1 23.2 129.4 5 SMLJ15A 15 16.7 18.5 1 24.4 123.0 5 SMLJ16A 16 17.8 19.7 1 26.0 115.4 5 SMLJ17A 17 18.9 20.9 1 27.6 106.6 5 SMLJ18A 18 20.0 22.1 1 29.2 102.8 5 SMLJ20A 20 22.2 24.5 1 32.4 92.6 5 SMLJ22A 22 24.4 26.9 1 35.5 84.4 5 SMLJ24A 24 26.7 29.5 1 38.9 77.2 5 SMLJ26A 26 28.9 31.9 1 42.1 71.2 5 SMLJ28A 28 31.1 34.4 1 45.4 66.0 5 SMLJ30A 30 33.3 36.8 1 48.4 62.0 5 SMLJ33A 33 36.7 40.6 1 53.3 56.2 5 Rev. 20160415 SML SERIES TRANSIENT ABSORPTION ZENER DIODES High-reliability discrete products and engineering services since 1977 Part number Modified “J” bend lead Reverse standoff voltage (1) Breakdown voltage V(BR) @ IT VWM IT Maximum clamping voltage @ IPP Peak pulse current Maximum reverse leakage @ VWM IPP ID VOLTS MIN MAX mA VOLTS AMPS µA SMLJ36A 36 40.0 44.2 1 58.1 51.6 5 SMLJ40A 40 44.4 49.1 1 64.5 46.4 5 SMLJ43A 43 47.8 52.8 1 69.4 43.2 5 SMLJ45A 45 50.0 55.3 1 72.7 41.2 5 SMLJ48A 48 53.3 58.9 1 77.4 38.8 5 SMLJ51A 51 56.7 62.7 1 82.4 36.4 5 SMLJ54A 54 60.0 66.3 1 87.1 34.4 5 SMLJ58A 58 64.4 71.2 1 93.6 32.0 5 SMLJ60A 60 66.7 73.7 1 96.8 31.0 5 SMLJ64A 64 71.1 78.6 1 103.0 29.2 5 SMLJ70A 70 77.8 86.0 1 113.0 26.6 5 SMLJ75A 75 83.3 92.1 1 121.0 24.8 5 SMLJ78A 78 86.7 95.8 1 126.0 22.8 5 SMLJ85A 85 94.4 104.0 1 137.0 20.8 5 SMLJ90A 90 100 111 1 146.0 20.6 5 SMLJ100A 100 111 123 1 162.0 18.6 5 SMLJ110A 110 122 135 1 177.0 16.8 5 SMLJ120A 120 133 147 1 193.0 15.6 5 SMLJ130A 130 144 159 1 209.0 14.4 5 SMLJ150A 150 167 185 1 243.0 12.4 5 SMLJ160A 160 178 197 1 259.0 11.6 5 SMLJ170A 170 189 209 1 275.0 11.0 5 Note 1: Transient absorption zener diodes are normally selected according to the reverse stand off voltage which should be equal to or greater than the DC or continuous peak operating voltage level. Rev. 20160415 High-reliability discrete products and engineering services since 1977 SML SERIES TRANSIENT ABSORPTION ZENER DIODES MECHANICAL CHARACTERISTICS Case: TO-214AB Marking: Body painted, alpha-numeric Polarity: Cathode band Rev. 20160415 High-reliability discrete products and engineering services since 1977 SML SERIES TRANSIENT ABSORPTION ZENER DIODES Rev. 20160415