SMC SERIES TRANSIENT ABSORPTION ZENER DIODES High-reliability discrete products and engineering services since 1977 FEATURES Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix. For bi-directional indicate a C or CA suffix after the part number (i.e. SMCJ5.0C or SMCJ5.0CA) MAXIMUM RATINGS Rating Value Peak power dissipation 1500W at 10/1000µs (see fig. 1 & 2) Tclamping (0 V to V(BR) min) < 1x 10-12 seconds Forward surge rating 200 amps, 1/120 seconds @ 25°C(excluding bidirectional) Operating and storage temperature range -65° to 150°C ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) Part number Modified “J” bend lead Reverse standoff voltage (1) Breakdown voltage V(BR) @ IT VWM IT Maximum clamping voltage @ IPP Peak pulse current IPP Maximum reverse leakage @ VWM ID VOLTS MIN MAX mA VOLTS AMPS µA SMCJ5.0A 5.0 6.40 7.00 10 9.2 163.0 1000 SMCJ6.0A 6.0 6.67 7.37 10 10.3 145.6 1000 SMCJ6.5A 6.5 7.22 7.98 10 11.2 133.9 500 SMCJ7.0A 7.0 7.78 8.60 10 12.0 125.0 200 SMCJ7.5A 7.5 8.33 9.21 1 12.9 116.3 100 SMCJ8.0A 8.0 8.89 9.83 1 13.6 110.3 50 SMCJ8.5A 8.5 9.44 10.4 1 14.4 104.2 25 SMCJ9.0A 9.0 10.0 11.1 1 15.4 97.4 10 SMCJ10A 10 11.1 12.3 1 17.0 88.2 5 SMCJ11A 11 12.2 13.5 1 18.2 82.4 5 SMCJ12A 12 13.3 14.7 1 19.9 75.3 5 SMCJ13A 13 14.4 15.9 1 21.5 69.7 5 SMCJ14A 14 15.6 17.2 1 23.2 64.7 5 SMCJ15A 15 16.7 18.5 1 24.4 61.5 5 SMCJ16A 16 17.8 19.7 1 26.0 57.7 5 SMCJ17A 17 18.9 20.9 1 27.6 53.3 5 SMCJ18A 18 20.0 22.1 1 29.2 51.4 5 SMCJ20A 20 22.2 24.5 1 32.4 46.3 5 SMCJ22A 22 24.4 26.9 1 35.5 42.2 5 SMCJ24A 24 26.7 29.5 1 38.9 38.6 5 SMCJ26A 26 28.9 31.9 1 42.1 35.6 5 SMCJ28A 28 31.1 34.4 1 45.4 33.0 5 SMCJ30A 30 33.3 36.8 1 48.4 31.0 5 SMCJ33A 33 36.7 40.6 1 53.3 28.1 5 Rev. 20120828 SMC SERIES TRANSIENT ABSORPTION ZENER DIODES High-reliability discrete products and engineering services since 1977 Part number Modified “J” bend lead Reverse standoff voltage (1) Breakdown voltage V(BR) @ IT VWM IT Maximum clamping voltage @ IPP Peak pulse current Maximum reverse leakage @ VWM IPP ID VOLTS MIN MAX mA VOLTS AMPS µA SMCJ36A 36 40.0 44.2 1 58.1 25.8 5 SMCJ40A 40 44.4 49.1 1 64.5 23.2 5 SMCJ43A 43 47.8 52.8 1 69.4 21.6 5 SMCJ45A 45 50.0 55.3 1 72.7 20.6 5 SMCJ48A 48 53.3 58.9 1 77.4 19.4 5 SMCJ51A 51 56.7 62.7 1 82.4 18.2 5 SMCJ54A 54 60.0 66.3 1 87.1 17.2 5 SMCJ58A 58 64.4 71.2 1 93.6 16.0 5 SMCJ60A 60 66.7 73.7 1 96.8 15.5 5 SMCJ64A 64 71.1 78.6 1 103.0 14.6 5 SMCJ70A 70 77.8 86.0 1 113.0 13.3 5 SMCJ75A 75 83.3 92.1 1 121.0 12.4 5 SMCJ78A 78 86.7 95.8 1 126.0 11.4 5 SMCJ85A 85 94.4 104.0 1 137.0 10.4 5 SMCJ90A 90 100 111 1 146.0 10.3 5 SMCJ100A 100 111 123 1 162.0 9.3 5 SMCJ110A 110 122 135 1 177.0 8.4 5 SMCJ120A 120 133 147 1 193.0 7.8 5 SMCJ130A 130 144 159 1 209.0 7.2 5 SMCJ150A 150 167 185 1 243.0 6.2 5 SMCJ160A 160 178 197 1 259.0 5.8 5 SMCJ170A 170 189 209 1 275.0 5.5 5 Note 1: Transient absorption zener diodes are normally selected according to the reverse stand off voltage which should be equal to or greater than the DC or continuous peak operating voltage level. Rev. 20120828 High-reliability discrete products and engineering services since 1977 SMC SERIES TRANSIENT ABSORPTION ZENER DIODES MECHANICAL CHARACTERISTICS Case: TO-214AB Marking: Body painted, alpha-numeric Polarity: Cathode band Rev. 20120828 High-reliability discrete products and engineering services since 1977 PEAK PULSE POWER VS PULSE TIME DERATING CURVE SMC SERIES TRANSIENT ABSORPTION ZENER DIODES PULSE WAVEFORM (Test wave form parameters tr = 10µs, tp = 1000µs) TYPICAL CAPACITANCE VS STAND-OFF VOLTAGE Rev. 20120828