331 Ushers Road, Ballston Lake, NY 12019 USA +1 (518) 877-5173, Fax +1 (518) 877-8346 Email: [email protected] http://www.sixnet.com Remote Access Switch – (Ethernet Modem) Remotely Access your Ethernet Network through a Phone Connection The ET-5MS-MDM-1 combines a SIXNET Industrial Telephone Modem with a SIXNET Industrial Managed Switch. This powerful combination allows you to easily and securely access your Ethernet network from any remote location over standard telephone lines. 5 Ethernet Ports with Integrated Phone Modem Save Time and Money The ET-5MS-MDM-1 allows you to avoid those costly site visits and respond to network situations immediately! Now you can perform remote diagnostics and maintenance from the comfort of your office, home or another facility. Real-time Secure Performance Advanced PSTN modem features o Make easy and secure dial-in connections o Automatic dial-out on a trigger input o Connection speeds up to Fast 56K (V.90) o Full data compression and error control supported o Compliant with telephone systems world-wide Advanced Ethernet switch features o Five 10/100 fast Ethernet ports o Auto-speed/duplex, auto-crossover & auto-polarity o Plug and play operation or full management ability o RSTP, VLAN, IGMP, QoS, SNMP and more Easy configuration with web or terminal interfaces Secure connections with HTTPS, SSL, SSH, SNMPv3 … Trouble Free Operation High Mean Time Between Failure rating Twenty year support and service policy Free field-installable upgrades forever -40 to +75 °C operation – no fans or moving parts! UL, CSA (CUL), and CE certified Marine, offshore and hazardous locations rated Enhanced surge and spike protection Dual (redundant) power inputs Alarm output and trigger input for PLC (or other device) Certified to Perform: ISO9001 Certified Class 1, Div II & Cenelec Zone 2 Marine & European Offshore Community UL508 for Safety The Power of Linux IPm Inside PSTN ET-5MS-MDM SIXNET Makes Your Job Easier Hardware Highlights: Performance Specifications Industrial Ethernet Switch Ethernet switch type Ethernet protocols supported RJ45 ports (shielded) RJ45 speed (10 or 100 Mbps) RJ45 MDI/MDIX RJ45 TD and RD polarity Typical latency for 10 Mbps ports Typ. latency for 100 Mbps ports Full or half duplex operation MAC addresses supported Memory bandwidth 5 Ethernet ports Managed All IEEE 802.3 10/100BaseTX Auto-negotiation Auto-crossover Auto-polarity 16 us + frame time 5 us + frame time Configurable 2048 3.2 Gbps Industrial Telephone Modem Maximum data rates Compatibility PSTN modem 56 Kbps V.90, V.34, V.32, V.32 bis, V.22, V.22 bis, V.21 V.42 bis V.42 MNP or LAP 0.3 2 RJ11 (phone and line) Standard AT and S register World-wide (100+ countries) FCC Part 68; Industry Canada CS03-8; CTR21 (98/482/EC); ACA TS 001 and ACA TS 002 RJ45 port 9600 Bps, 8, None, 1, None Data compression Error correction Ringer Jacks Command sets Country compatibility Telecom ratings RS232 Management Port Fixed baud rate, data bits, parity, stop bits, flow control “PLC” Input and Output PLC / Alarm output voltage Maximum current output PLC / Trigger input voltage Typically current input Environmental Power input Input power (all ports active) Input voltage (all models) Transient protection Spike protection Ethernet isolation Operating temperature range Storage temperature range Humidity (non-condensing) Vibration Electrical safety EMI emissions EMC immunity Hazardous locations Varies on load & settings Trigger (in) & alarm (out) signals Same as switch input power voltage 0.5 Amp 10-30 VDC 6.5 mA @ 24 VDC DIN rail or direct panel mounting Redundant input terminals 5.0 W typical 10-30 VDC (continuous) 15,000 watts peak 5,000 watts (10 times for 10 uS) 1500 VRMS 1 minute -40 to +75 °C -40 to +85 °C 5 to 95% RH IEC68-2-6 UL508/CSA C22, EN61010-1 FCC part 15, ICES-003, EN55022 IEC61326-1, EN50082-1 UL1604, CSA C22.2/213 (Class 1, Div. 2), Cenelec EN50021 (Zone 2) Packaging (Lexan & alum. case) IP30 protection Dimensions (L x W x H) See following page Specifications are subject to change. Consult factory for latest information. 5 port industrial Ethernet managed switch with integrated industrial telephone modem Output for reporting power and operational status Input for triggering alarm dial-out operation Redundant power inputs and surge/spike protection Industrial rated for -40 to +75 °C operation (no fans!) UL/CSA, CE and Zone 2 rated for hazardous locations Rated for marine and off-shore use DIN rail or direct panel mounting (no extra kits required) Telephone Features: Dial-in and automatic dial-out capabilities PPP (Point-to-Point Protocol) for dial-up connections Fast phone connections up to 56 Kbps Full data compression and error correction options Networking Features: Auto-detecting, auto-crossover and auto-polarity Store and forward wire speed switching Support for up to 2048 MAC addresses Full-Duplex operation with flow control (no collisions!) Rapid Spanning Tree (RSTP) for fault-tolerant loops Priority queuing (QoS) for real-time performance SNMP v1 and V2 for network management SNMP v3 for authentication and encryption SNMP notifications (traps) for report on event IGMP v1 & v2 for IP multicast filtering VLAN (port & tag based) for traffic segregation Message filtering to stop broadcast/multicast storms DHCP client for automatic IP address assignment RMON and port mirroring for diagnostics Configuration via secure (https) Web interface, Telnet / SSH (network), terminal (RS232) or SNMP (v1, v2, v3) Router Information Protocol (RIP) Ethernet Compliance: IEEE 802.3 (10Mbps Ethernet supports legacy devices) IEEE 802.3u (Fast Ethernet 100Mbps for newer devices) IEEE 802.3x (Full-Duplex with Flow Control) IEEE 802.1D/w (Rapid Spanning Tree for redundant rings and Spanning Tree for interoperability) IEEE 802.1p (Priority Queuing – QoS, CoS, ToS/DS) IEEE 802.1Q (VLAN for traffic segregation) Additional features are in the works and are provided through FREE Firmware Upgrades. Contact SIXNET for the latest information. Ordering Guide Guide Ordering Part Number: ET-5MS-MDM-1 Part Number: ET-5MS-MDM-1 Accessories: Accessories: RM-PS-024-01F Power supply – AC to 24VDC, 1A ET-PS-024-02 Power supply – surge AC to protector 24VDC, 2A SP-ETH-2 2 port Ethernet SP-ETH-2 2 port Ethernet lightning protector SP-TELCO-1 1 port phone lightning protector RJ45-DB9F-CBL PC to managed switch serial cable 331 Ushers Road Ballston Lake, NY 12019 USA Email:[email protected] Phone: +1 (518) 877-5173 Fax: +1 (518) 877-8346 Web: www.sixnet.com ET-5MS-MDM-1 Mechanical Dimensions ET-5MS-MDM-1 Power and Alarm Connections Single DC Power P1 P2 IN IN To + - One VDC Supply From P1 P2 PLC PLC OUT IN IN Chassis Ground To Panel Redundant DC Power + - IN IN + Chassis Ground To Panel + - + - Dual VDC Supplies From OUT IN IN OUT PLC or Other Device To PLC PLC + - 331 Ushers Road Ballston Lake, NY 12019 USA Email:[email protected] Phone: +1 (518) 877-5173 Fax: +1 (518) 877-8346 Web: www.sixnet.com OUT PLC or Other Device +