NTE7110 Integrated Circuit 3 Channel Analog Switch Description: The NTE7110 is an integrated circuit in a 16–Lead DIP type package designed for use as an electronic switch in VCR and audio signal processing applications. This device contains three channel two input switch circuits with each switch being controlled independently. Features: D Low Offset Voltage at Output: 5mV Typ D Low Switching Noise D Wide Dynamic Range D Wide Frequency Range: 40MHz Typ D Low Crosstalk D High Speed Response: 0.2µs Typ D Low Power Consumption Absolute Maximum Ratings: Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14V Power Dissipation, PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000mw Derate Above 25°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10mW/°C Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –20° to +75°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +125°C Recommended Operating Condition: Supply Voltage Range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5V to 13V Electrical Characteristics: (TA = +25°C unless otherwise specified) Parameter Circuit Current Voltage Gain Symbol Test Conditions Min Typ Max Unit ICC1 VCC = 9V 5.2 7.1 9.0 mA ICC2 VCC = 5V 2.4 3.4 4.4 mA GV1 f = 1MHz, Vin = 0.5VP–P –0.6 –0.1 0.4 dB GV2 f = 10MHz, Vin = 0.5VP–P –0.6 –0.1 0.4 dB Electrical Characteristics (Cont’d): (TA = +25°C unless otherwise specified) Parameter Symbol 2nd Harmonic Distortion HD Test Conditions Min Typ Max Unit f = 5MHz, Vin = 4.5VP–P, RL = 2kΩ – –60 –50 dB Switch Crosstalk CTsw f = 5MHz, Vin = 0.5VP–P – –70 –60 dB Channel Crosstalk CTch f = 5MHz, Vin = 0.5VP–P – –70 –60 dB Output DC Offset Voltage VOS –10 0 +10 mV Switch Threshold Voltage Vth1 VCC = 5V 1.3 – 2.3 V Vth2 VCC = 9V 1.7 – 2.7 V Vth3 VCC = 12V 2.0 – 3.0 V – 20 – kΩ Input Impedance Zin Pin Connection Diagram Input 1B 1 16 Input 1A Control Input 1 2 Output 1 3 15 GND 1 14 Input 2B 13 VCC GND 2 4 Output 2 5 12 Control Input 2 Output 3 6 11 Input 2A Control Input 3 7 10 GND 3 Input 3A 8 16 9 Input 3B 9 .260 (6.6) Max 1 8 .300 (7.62) .785 (19.9) Max .200 (5.08) Max .245 (6.22) Min .100 (2.54) .700 (17.7)