UNISONIC TECHNOLOGIES CO., LTD BTB40 Preliminary TRIAC 40A STANDARD TRIAC DESCRIPTION The UTC BTB40 is a 40A standard triac, it uses UTC’s advanced technology to provide customers with low thermal resistance with clip bonding and high commutation capability, etc. The UTC BTB40 is suitable for general purpose AC switching, heating regulation and on/off function in static relays, etc. FEATURES * Low thermal resistance with clip bonding * High current capability * High commutation capability SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free BTB40L-x-xx-T3P-T BTB40G-x-xx-T3P-T TO-3P Pin Assignment 1 2 3 MT1 MT2 G Packing Tube SENSITIVITY AND TYPE PART NUMBER B ◎: Available Package VOLTAGE 600V ◎ 800V ◎ SENSITIVITY TYPE 50mA STANDARD MARKING www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd 1 of 3 QW-R401-047.b BTB40 Preliminary TRIAC ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL RATINGS UNIT On-State RMS Current (Full Sine Wave) TC=95°C IT(RMS) 40 A F=50Hz, t=20ms 400 A Non Repetitive Surge Peak On-State ITSM Current (Full Cycle, TJ initial=25°C) F=60Hz, t=16.7ms 420 A I2t Value for Fusing tp=10ms I2 t 1000 A2s Critical Rate of Rise of On-State Current: F=120Hz, TJ=125°C dI/dt 50 A/µs IG=2xIGT, tr≤100ns Non Repetitive Surge Peak Off-State tp=10ms, TJ=25°C VDSM/VRSM VDSM/VRSM+100 V Voltage Peak Gate Current tp=20µs, TJ=125°C IGM 8 A Average Gate Power Dissipation TJ=125°C PG(AV) 1 W Storage Junction Temperature TSTG -40~+150 °C Operating Junction Temperature TJ -40~+125 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. DEVICE SUMMARY PARAMETER On-State RMS Current Repetitive Peak Off-State Voltage Triggering Gate Current PARAMETER UNIT A V mA SYMBOL θJA θJC RATINGS 50 0.6 UNIT °C/W °C/W ELECTRICAL CHARACTERISTICS (TJ=25 °C, unless otherwise specified) PARAMETER SYMBOL Gate Trigger Current (Note 1) IGT Gate Trigger Voltage VGT Gate Non-Trigger Voltage VGD Holding Current (Note 2) IH Latching Current IL Critical Rate of Rise of Off-State Voltage (Note 2) Critical Rate of Rise of Off-State Voltage at Commutation (Note 2) RATINGS 40 600 50 THERMAL RESISTANCES Junction to Ambient Junction to Case (AC) SYMBOL IT(RMS) VDRM/VRRM IGT dV/dt (dV/dt)c TEST CONDITIONS I-II-III IV VD=12V, RL=33Ω ALL VD=VDRM, RL=3.3kΩ, ALL TJ=125°C IT=500mA I-III-IV IG=1.2IGT II MIN TYP MAX UNIT 50 mA 100 mA 1.3 V 0.2 V 80 70 160 mA mA mA VD=67%VDRM, Gate Open, TJ=125°C 500 V/µs (dI/dt)c=20A/ms, TJ=125°C V/µs 10 STATIC CHARACTERISTICS PARAMETER Peak On-State Voltage (Note 1) Threshold Voltage (Note 2) Dynamic Resistance (Note 2) SYMBOL TEST CONDITIONS VT ITM=60A, tp=380μs, TJ=25°C VTO TJ=125°C RD TJ=125°C IDRM VDRM=VRRM, TJ=25°C Repetitive Peak Off-State Current IRRM VDRM=VRRM, TJ=125°C Notes: 1. Minimum IGT is guaranted at 5% of IGT max. 2. For both polarities of MT2 referenced to MT1. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 1.55 V 0.85 V 10 mΩ 5 µA 5 mA 2 of 3 QW-R401-047.b BTB40 Preliminary TRIAC UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R401-047.b