Datasheet

UNISONIC TECHNOLOGIES CO., LTD
BTB04
Preliminary
TRIAC
SENSITIVE GATE TRIACS

DESCRIPTION
The UTC BTB04 is a 4A triacs, it uses UTC’s advanced
technology to provide customers with high commutation
performances.
The UTC BTB04 is suitable for inductive loads, general
purpose AC switching and an ON/OFF function in applications
such as induction motor starting circuits, for phase control
operation in light dimmers and static relays, etc.

FEATURES
* Low gate trigger current
* Low holding current

SYMBOL

ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
BTB04L-x-x-TA3-T
BTB04G-x-x-TA3-T

Package
TO-220
Pin Assignment
1
2
3
MT1 MT2
G
Packing
Tube
SENSITIVITY AND TYPE
PART NUMBER
A
S
D
T
◎: Available
VOLTAGE
400V
◎
◎
◎
www.unisonic.com.tw
Copyright © 2016 Unisonic Technologies Co., Ltd
600V
◎
◎
◎
SENSITIVITY
TYPE
10mA
10mA
5mA
5mA
STANDARD
STANDARD
STANDARD
STANDARD
1 of 5
QW-R401-039.c
BTB04

Preliminary
TRIAC
MARKING
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 5
QW-R401-039.c
BTB04

Preliminary
TRIAC
ABSOLUTE MAXIMUM RATINGS
PARAMETER
RMS On-State Current
(360° Conduction Angle)
Non Repetitive Surge Peak On-State
Current (TJ initial=25°C)
TC=90°C
tp=8.3ms
SYMBOL
RATINGS
UNIT
IT(RMS)
4
A
42
A
ITSM
40
tp=10ms
I2t Value
tp=10ms
I2 t
8
Critical Rate of Rise of On-State Current: Repetitive F=50Hz
10
dI/dt
IG=50mA, dIG/dt=0.1A/µs
Non Repetitive
50
Repetitive Peak Off-State Voltage
400 T/D
400
VDRM/VRRM
(TJ=110°C)
600
600 T/S
Peak Gate Current
tp=20µs
IGM
4
Peak Positive Gate Voltage
tp=20µs
VGM
16
Peak Positive Gate Power Dissipation
tp=20µs
PGM)
40
Average Gate Power Dissipation
PG(AV)
1
Operating Junction Temperature
TJ
-40~+110
Storage Junction Temperature
TSTG
-40~+150
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.

A
A2s
A/µs
A/µs
V
V
A
V
W
W
°C
°C
THERMAL RESISTANCES
PARAMETER
Junction to Ambient
Junction to Case for 360° Conduction Angle (F=50Hz) (AC)
Junction to Case (DC)
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
SYMBOL
θJA
θJC
RATINGS
60
2.4
3.2
UNIT
°C/W
°C/W
°C/W
3 of 5
QW-R401-039.c
BTB04

Preliminary
TRIAC
ELECTRICAL CHARACTERISTICS
PARAMETER SYMBOL
Gate Trigger
Current
Gate Trigger
Voltage
Gate
Non-Trigger
Voltage
Time Gate
Trigger
Holding
Current
(Note 1)
Latching
Current
IGT
VGT
VGD
tGT
TEST CONDITIONS
VD=12V (DC)
RL=33Ω
TJ=25°C
VD=VDRM,
RL=3.3kΩ,
TJ=110°C
VD=VDRM,
IG=40mA,
dIG/dt=0.5A/µs,
TJ=25°C
I-II-III
IV
A
T
D
S
UNIT
MIN TYP MAX MIN TYP MAX MIN TYP MAX MIN TYP MAX
5
5
10
10 mA
5
10
10
25 mA
ALL
ALL
1.5
0.2
ALL
IH
IT=100mA, Gate Open,
TJ=25°C
IL
IG=1.2IGT,
TJ=25°C
I-III-IV
II
1.5
0.2
2
0.2
2
15
10
20
1.5
www.unisonic.com.tw
0.2
2
15
10
20
Peak
On-State
ITM=5.5A, tp=380μs,
VTM
1.65
1.65
Voltage
TJ=25°C
(Note 1)
Repetitive
IDRM VDRM Rated, TJ=25°C
0.01
0.01
Peak
Off-State
IRRM VRRM Rated, TJ=110°C
0.75
0.75
Current
Critical Rate
Linear Slope up to
of Rise of
dV/dt VD=67%VDRM, Gate
Off-State
10
10
10
Voltage
Open, TJ=110°C
(Note 1)
Critical Rate
of Rise of
(dI/dt)c=1.8A/ms,
Off-State
(dV/dt)c
1
1
TJ=110°C
Voltage at
Commutation
(Note 1)
Note: For either polarity of electrode MT2 voltage with reference to electrode MT1.
UNISONIC TECHNOLOGIES CO., LTD
1.5
V
2
25
20
40
mA
mA
mA
1.65
1.65
0.01
0.01 mA
0.75
0.75 mA
10
5
µs
25
20
40
V
V
V/µs
5
V/µs
4 of 5
QW-R401-039.c
BTB04
Preliminary
TRIAC
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 5
QW-R401-039.c