Datasheet

UNISONIC TECHNOLOGIES CO., LTD
4053
CMOS IC
TRIPLE 2-CHANNEL ANALOG
MULTIPLEXERS/DEMULTIPLEXERS

DESCRIPTION
UTC 4053 is triple 2-channel analog multiplexers/demultiplexers
for application as digitally–controlled analog switches.
The device has three separate digital control inputs and an inhibit
input. It feature low ON impedance and very low OFF leakage
current. Control of analog signals up to the complete supply voltage
range can be achieved.

FEATURES
* Wide Analog Voltage Range: VDD-VEE = 3V~18V.
(Note: VEE must be≦VSS)
* Break-Before-Make Switching Eliminates Channel Overlap.
* Linearized Transfer Characteristics
* Implement an SPDT Switch Effectively.
* Pin to Pin Replacement for CD4053

ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
4053L-D16-T
4053G-D16-T
4053G-S16-R
4053G-P16-R
Package
Packing
DIP-16
SOP-16
TSSOP-16
Tube
Tape Reel
Tape Reel
4053L-D16-T

(1)Packing Type
(1) T: Tube, R: Tape Reel
(2)Package Type
(2) D16: DIP-16, S16: SOP-16, P16: TSSOP-16
(3)Green Package
(3) L: Lead Free, G: Halogen Free and Lead Free
MARKING
DIP-16
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., LTD
SOP-16 / TSSOP-16
1 of 6
QW-R502-036.E
4053

CMOS IC
PIN CONFIGURATION
Y1 1
16
Y0 2
15 Y
Z1 3
14
X
13
X1
12
X0
Z 4
Z0 5
UTC 4053
INH 6

VDD
11 A
VEE 7
10
B
VSS 8
9
C
PIN DESCRIPTION
PIN No.
14,15,4
6
7
8
11,10,9
12,13
2,1
5,3
16
SYMBAL
X,Y,Z
INH
VEE
VSS
A,B,C
X0,X1
Y0,Y1
Z0,Z1
VDD
NAME AND FUNCTION
Commons Input/Output
Inhibit Input
Supply Voltage
Ground
Digital Control Inputs
A-X Switches Inputs/Outputs
B-Y Switches Inputs/Outputs
C-Z Switches Inputs/Outputs
Positive Supply Voltage
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 6
QW-R502-036.E
4053

CMOS IC
ABSOLUTE MAXIMUM RATING
PARAMETER
SYMBOL
RATINGS
UNIT
DC Supply Voltage (Referenced to VEE, VSS≧VEE)
VDD
-0.5 ~ +18
V
Input or Output Voltage (DC or Transient)
VIN, VOUT
-0.5 ~ VDD +0.5
V
(Referenced to VSS for Control Inputs and VEE for Switch I/O)
Input Current (DC or Transient), per Control Pin
IIN
±10
mA
Switch Through Current
ISW
±25
mA
500
mW
Power Dissipation
PD
Derating above 65°C
7
mW/°C
Junction Temperature
TJ
125
°C
Operating Temperature
TOPR
-40 ~ +125
°C
Storage Temperature
TSTG
-40 ~ +150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.

ELECTRICAL CHARACTERISTICS (TA=25°C, unless otherwise specified.)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
TYP
MAX UNIT
SUPPLY REQUIREMENTS (Voltages Referenced to VEE)
Power Supply Voltage Range
VDD
VDD – 3≧VSS≧VEE
3
18
V
VDD=5V
0.005
5
µA
Control Inputs: VIN = VSS or VDD
Quiescent Current per
IQ
VDD=10V
Switch I/O: VEE ≦VI/O ≦VDD,
0.010
10
µA
Package
∆VSW≦500mV (Note 2)
VDD=15V
0.015
20
µA
VDD=5V
(0.07 µA/kHz) f + IQ
µA
Total Supply Current
TA=25°C only (The channel
(Dynamic Plus Quiescent, VDD=10V
ID(AV) component, (VIN-VOUT)/RON, is
(0.20 µA/kHz) f + IQ
µA
Per Package)
excluded)
VDD=15V
(0.36 µA/kHz) f + IQ
µA
SWITCHES IN/OUT AND COMMONS OUT/IN -- X, Y, Z (Voltages Referenced to VEE)
Recommended Peak–to–Peak Voltage
VI/O
Channel On or Off
0
VDD
VPP
Into or Out of the Switch
Recommended Static or Dynamic
∆VSW Channel On
0
600
mV
Voltage Across the Switch (Note2)
Output Offset Voltage
VO(OFF) VIN = 0V, No Load
10
µV
250
1050
Ω
VDD=5V
∆VSW≦500mV
RON
VIN = VIL or VIH (Control), and
ON Resistance
VDD=10V
120
500
Ω
V
=
0
to
V
(Switch)
VDD=15V
80
280
Ω
IN
DD
25
70
Ω
∆ON Resistance Between VDD=5V
Any Two Channels in the
VDD=10V
∆RON
10
50
Ω
Same Package
VDD=15V
10
45
Ω
VIN = VIL or VIH (Control)
Channel to Channel or Any One
Off–Channel Leakage Current
IOFF
±0.05
±100 nA
Channel, VDD=15V
Capacitance, Switch I/O
CI/O
Inhibit = VDD
10
pF
Capacitance, Common O/I
CO/I
Inhibit = VDD
17
pF
Pins Not Adjacent
0.15
pF
Capacitance, Feedthrough
CI/O
(Channel Off)
Pins Adjacent
0.47
Pf
CONTROL INPUTS – INHIBIT A, B, C (Voltages Referenced to VSS)
VDD=5V
2.25
1.5
V
VIL
Low Level Input Voltage
VDD=10V
RON= per spec, IOFF = per spec
4.50
3.0
V
VDD=15V
6.75
4.0
V
VDD=5V
3.5
2.75
V
High Level Input Voltage
VDD=10V
VIH
RON= per spec, IOFF = per spec
7.0
5.50
V
VDD=15V
11
8.25
V
Input Leakage Current
ILEAK VIN= 0 or VDD, VDD=15V
±0.00001 ±0.1
µA
Input Capacitance
CIN
5.0
7.5
pF
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 6
QW-R502-036.E
4053

CMOS IC
DYNAMIC ELECTRICAL CHARACTERISTICS
(CL = 50pF, TA=25°C, VEE≦VSS, unless otherwise specified)
PARAMETER
SYMBOL
Propagation Delay Times
Switch Input to Switch
Output (RL = 10 kΩ)
tPLH, tPHL
Inhibit to Output
tPHZ, tPLZ
tPZH, tPZL
Control Input to Output
tPLH, tPHL
Total Harmonic Distortion
THD
VDD-VEE
VDC
5
10
15
5
10
15
5
10
15
10
TEST CONDITIONS
tPLH, tPHL =(0.17 ns/pF)CL + 16.5ns
tPLH, tPHL =(0.08 ns/pF)CL + 4.0ns
tPLH, tPHL =(0.06 ns/pF)CL + 3.0ns
(RL=10kΩ, VEE=VSS), Output “1” or
“0” to High Impedance, or High
Impedance to “1” or “0” Level
RL = 10kΩ, VEE = VSS
MIN
TYP
MAX
UNIT
25
8.0
6.0
275
140
110
300
120
80
0.07
65
20
15
550
280
220
600
240
160
ns
ns
ns
ns
ns
ns
ns
ns
ns
%
RL = 10KΩ, f = 1 kHz, VIN = 5 VPP
RL=1kΩ, VIN= 1/2(VDD-VEE) p-p,
17
MHz
Bandwidth
BW
10
CL =50pF, 20 Log (VOUT/VIN)= -3dB)
RL=1KΩ, VIN = 1/2(VDD-VEE) p-p
Off Channel Feedthrough
10
-50
dB
Attenuation
fIN = 55MHz
RL = 1kΩ, VIN = 1/2 VDD-VEE)p-p
-50
dB
Channel Separation
10
fIN = 3MHz
R1 = 1kΩ, RL = 10kΩ Control
Crosstalk, Control Input to
10
75
mV
Common O/I
tTLH = tTHL = 20ns, Inhibit = VSS
Notes: 1. Data of “TYP” is intended as an indication of the IC’s potential performance.
2. For voltage drops across the switch(∆VSW)>600mV (>300mV at high temperature), excessive VDD current
may be drawn, i.e. the current out of the switch may contain both VDD and switch input components. The
reliability of the device will be unaffected unless the Maximum Ratings are exceeded.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 6
QW-R502-036.E
4053

CMOS IC
TEST CIRCUIT
VDD
VDD
VDD
IN/OUT
OUT/IN
VEE
VDD
LEVEL
CONVERTED
CONTROL
OUT/IN
IN/OUT
CONTROL
VEE
Switch Circuit Schematic

TRUTH TABLE
16
Control Inputs
Select
INHIBIT
C B
0 0
0
0 0
0
0 1
0
0 1
0
1 0
0
1 0
0
1 1
0
1 1
0
1
x
x
x = Don’t Care
ON Switches
A
0
1
0
1
0
1
0
1
x
UTC 4053
Z0 Y0
X0
Z0 Y0
X1
Z0 Y1
X0
Z0 Y1
X1
Z1 Y0
X0
Z1 Y0
X1
Z1 Y1
X0
Z1 Y1
X1
None
INH 6
A 11
B 10
C 9
VDD
BINARY TO 1 - OF - 2
DECODER WITH
INHIBIT
LEVEL
CONVERTER
8
VSS
7
VEE
X0 12
14 X
X1 13
Y0
2
Y1
1
Z0
5
Z1
3
15 Y
4 Z
UTC 4053 Functional Diagram
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 6
QW-R502-036.E
4053
CMOS IC
"ON" Resistance, RON (Ω)
"ON" Resistance, RON (Ω)
TYPICAL CHARACTERISTICS

"ON" Resistance, RON (Ω)
350
VDD = 2.5 V
300 VEE = - 2.5 V
Ta =25°C
250
200
150
100
50
0
-10 -8.0 -6.0 -4.0 -2.0
0
2.0 4.0 6.0 8.0 10
Input Voltage , VIN (V)
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
6 of 6
QW-R502-036.E