TAI-SAW TECHNOLOGY CO., LTD. No.3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com 70 MHz IF SAW Filter (DIP 20.2×12.6 mm) Model No.: TB0229A Rev. No.:3 A. Maximum Rating: 1. Input Power Level: +20 dBm 2. Operating Temperature: -10°C to +70°C 3. Storage Temperature: -40°C to +85°C B. Electrical Characteristics: Parameters Unit MHz Min. 69.9 Typical 70.0 Max. 70.1 dB - 23.0 26.0 1 dB Bandwidth MHz 11.6 12.01 - 3 dB Bandwidth MHz 12.1 12.39 - 40 dB Bandwidth MHz - 13.87 14.5 10 to 62 MHz dB 50 55 - 78 to 140 MHz dB 50 55 - Amplitude ripple within Fc ± 4.5 MHz dB - 0.8 1.0 Group delay ripple within Fc ± 4.5 MHz nsec - 40 70 Absolute Delay usec - 2.28 - - - LN - Center frequency, Fc Insertion Loss, IL Relative Attenuation: Substrate Material TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 2 - C. Frequency Characteristics: (1) Frequency Response (2) Passband response and Group Delay Variation TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 3 - D. Measurement Circuit: Source and load impedance: 50 Ω L1=150 nH, L2=3.3 nH E. Outline Drawing: 1 2 6 3 5 4 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 4 - Pin 3 : Balanced Input + or single ended input Pin 4: Balanced Input – or single ended input ground Pin 6: Balanced output + or single ended input output Pin 1: Balanced output – or single ended output ground Pin2,5:To be Ground □ : Week Code Unit : mm △ : Product / Year Code Year 2005 2009 2006 2010 2007 2011 2008 2012 Product Code B b B b TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 5 -