TAI-SAW TECHNOLOGY CO., LTD. No.3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com 70 MHz IF SAW Filter (SMD 13.3×6.5 mm) Model No.: TB0225A Rev. No.:4.0 RoHS Compliant Lead free Lead-free soldering A. Maximum Rating: 1. Input Power Level: +20 dBm 2. Operating Temperature: -10°C to +70°C 3. Storage Temperature: -40°C to +85°C B. Electrical Characteristics: Parameters Unit MHz Min. - Typical 70 Max. - dB - 22.2 24 1 dB Bandwidth MHz - 9.0 - 3 dB Bandwidth MHz 9.20 9.33 - 40 dB Bandwidth MHz - 10.67 11.00 10 to 64 MHz dB 38 45 - 76 to 140 MHz dB 38 45 - Amplitude ripple within Fc ± 4.0 MHz dB - 0.8 1.5 Group delay ripple within Fc ± 4.0 MHz nsec - 70 150 Absolute Delay usec - 1.59 - - - LT - ppm/ °C - -18 - Center frequency, Fc Insertion Loss, IL Relative Attenuation: Substrate Material Temperature Coefficient of frequency TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 2 - C. Frequency Characteristics: (1) Frequency Response (2) Passband response and Group Delay Variation TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 3 - D. Measurement Circuit: Source and load impedance: 50 Ω Network analyzer L1 K 50Ω SAW Filter L2 E 50Ω C2 C1 A,B,C,D,F,G,H,I,J,L Input: L1=150 nH; C1=56 pF Output: L2=369 nH; C2=62 pF E. Outline Drawing: 225 Pin K: RF input Pin E: RF output Pin A, B, C, D, G, H, I, L, F J: To be Ground □ : Week Code (Follow the table from planner each year) Unit : mm △ : Product / Year Code Year Product Code 2005 2009 2006 2010 2007 2011 2008 2012 B b B b TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 4 - F. PCB Footprint Unit: mm G.PACKING: REEL DIMENSION: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 5 - TAPE DIMENSION: H. RECOMMENDED REFLOW PROFILE: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 6 -