NTE778S Integrated Circuit Dual Operational Amplifier Description: The NTE778S is an integrated circuit designed as a low noise preamplifier in audio equipment and a general purpose operational amplifier in other electronic equipment. Two low noise operational amplifier circuits displaying internal phase−compensated high gain and low distortion are contained in a 8−pin SIP for applications over a wide range as a general−purpose dual amplifier in general electronic equipment. The device can also be used as a single power type and amplifier in portable equipment. It is also suitable as a headphone amplifier because of its high load current. Features: D High gain, Low Distortion GVO = 110dB, THE = 0.0015% (typ.) D High Slew Rate, High fT SR = 3.0V/µs, fT = 7MHz (typ.) D Low Noise (RS = 1kΩ) FLAT, VNI = 2µVrms (typ.) RIAA, VNI = 1µVrms (typ.) D Operation with Low Supply Voltage VCC ≥ 4V (±2V) D High Load Current, High Current Dissipation ILP = ±50mA, PD = 800mW Recommended Operating Conditions: Supply Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±2 to ±16V Rated Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±15 Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Supply Voltage, VCC, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±18V Load Current, ILP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50mA Differential Input Voltage, Vid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±30V Common Input Voltage, Vic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±15V Power Dissipation, PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800mW Thermal Dirating (TA ≥ 25°C), Kθ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8mW/°C Ambient Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −20° to +75°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −55° to +125°C Electrical Characteristics: (TA = +25°, VCC = +15V, unless otherwise specified) Parameter Symbol Test Conditions Min Typ Max Unit Circuit Current ICC Vin = 0 − 3.0 6.0 mA Input Offset Voltage VIO RS ≤ 10kΩ − 0.5 6.0 mV Input Offset Current IIO − 5 200 nA Input Bias Current IIB − − 500 nA Input Resistance Rin 0.3 5 − MΩ Open Loop Voltage Gain GVO RL ≥ 2kΩ, VO = ±10V 86 110 − dB Maximum Output Voltage VOM RL ≥ 10kΩ ±12 ±14 − V RL ≥ 2kΩ ±10 ±13 − V ±12 ±14 − V Common Input Voltage Range VCM Common Mode Rejection Ratio CMRR RS ≤ 10kΩ 70 90 − dB Supply Voltage SVRR RS ≤ 10kΩ − 30 150 µV/V − 90 180 mW − 3.0 − V/µs − 7 − MHz − 2.0 − µVrms Power Dissipation Pd Slew Rate SR Gain Bandwidth Product fT Input Referred Noise Voltage VNL GV = 0dB, RL 2kΩ RS = 1kΩ, BW:1−Hz to 30Hz Pin Connection Diagram .768 (19.52) Max 8 V (+) 7 Output 2 6 Invert Input 2 5 Non−Invert Input 2 4 V (−) 3 Non−Invert Input 1 2 Invert Input 1 1 Output 1 .118 (3.0) Max .264 (6.72) Max 1 8 .165 (4.2) Min .100 (2.54) Typ .700 (17.78)