Datasheet

UNISONIC TECHNOLOGIES CO., LTD
78DXXA
LINEAR INTEGRATED CIRCUIT
3-TERMINALS 1A POSITIVE
VOLTAGE REGULATOR
1
TO-252

DESCRIPTION
The UTC 78DXXA family is monolithic fixed voltage regulator
integrated circuit. They are suitable for applications that required
supply current up to 1 A.

TO-252-3
FEATURES
* Peak output current up to 1A.
* Fixed output voltage of 5V, 6V, 7V, 8V, 9V, 10V, 12V, 15V, 18V,
20V and 24V available.
* Thermal overload shutdown protection.
* Short circuit current limiting.
* Output transistor SOA protection.

1
1
SOT-223
TO-251
1
ORDERING INFORMATION
Ordering Number
Lead Free
78DXXAL-TM3-T
78DXXAL-TN3-R
78DXXAL-TNA-R
Note: Pin Code: I: Input
Halogen Free
78DXXAG-AA3-R
78DXXAG-TM3-T
78DXXAG-TN3-R
78DXXAG-TNA-R
G: GND
O: Output
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
Package
SOT-223
TO-251
TO-252
TO-252-3
Pin Assignment
1
2
3
I
G
O
I
G
O
I
G
O
I
G
O
Packing
Tape Reel
Tube
Tape Reel
Tape Reel
1 of 10
QW-R101-010.S
78DXXA

LINEAR INTEGRATED CIRCUIT
MARKING INFORMATION
PACKAGE
SOT-223
TO-251
TO-252
TO-252-3
VOLTAGE CODE
05: 5V
06: 6V
08: 8V
09: 9V
10: 10V
12: 12V
15: 15V
18: 18V
20: 20V
24: 24V
MARKING
Voltage Code
Lot Code
UTC
78DXXA
1
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2
L: Lead Free
G: Halogen Free
Date Code
3
2 of 10
QW-R101-010.S
78DXXA

LINEAR INTEGRATED CIRCUIT
BLOCK DIAGRAM
INPUT
1
R13
R17
T10
R14
Z2
R9
T8
T9
T12
R19
R18
T13
T11
R11
T5
T6
R15
T14
R12
R10
OUTPUT
3
R8
R5
T4
Z1
T15
R4
R6
R16
R1
R2
T7
C1
R7
T3
T1
T2
R3
GND
2

APPLICATION CIRCUIT
Note: Bypass capacitors are recommended for optimum stability and transient response and should be located
as close as possible to the regulators.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 10
QW-R101-010.S
78DXXA

LINEAR INTEGRATED CIRCUIT
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
PARAMETER
SYMBOL
VIN
IOUT
Input Voltage
Output Current
Power Dissipation (TC=25°C)
SOT-223
TO-251/TO-252
TO-252-3
RATINGS
35
1
8.3
PD
UNIT
V
A
W
10
Junction Temperature
TJ
+150
°C
Operating Temperature
TOPR
-40 ~ +85
°C
Storage Temperature
TSTG
-55 ~ +150
°C
Notes: 1. Absolute maximum ratings are stress ratings only and functional device operation is not implied.
The device could be damaged beyond Absolute maximum ratings.
2. The maximum steady state usable output current are dependent on input voltage, heat sinking, lead
length of the package and copper pattern of PCB. The data are showed as electrical characteristics table
represents pulse test conditions with junction temperatures specified at the initiation of test.

THERMAL DATA
PARAMETER
Junction to Ambient
Junction to Case

SYMBOL
SOT-223
TO-251/TO-252
TO-252-3
SOT-223
TO-251/TO-252
TO-252-3
RATINGS
150
θJA
UNIT
°C/W
112
15
θJC
°C/W
12.5
ELECTRICAL CHARACTERISTICS
(TJ=25C, CI =0.33uF, CO=0.1uF, PD≤15W, unless otherwise specified)
For 78D05A (VIN =10V, IOUT =0.5A)
PARAMETER
Output Voltage
SYMBOL
VOUT
Load Regulation
VOUT
Line Regulation
VOUT
Quiescent Current
Quiescent Current Change
Output Noise Voltage
Temperature coefficient of VOUT
Ripple Rejection
Peak Output Current
Short-Circuit Current
Dropout Voltage
IQ
IQ
eN
VOUT/T
RR
IPEAK
ISC
VD
TEST CONDITIONS
IOUT =5mA~1.0A
VIN =7.5~20V, IOUT =5mA~1.0A
IOUT =5mA~1.0A
IOUT =0.25A~0.75A
VIN =7~25V
VIN =7.5~20V, IOUT =1.0A
IOUT≤1.0A
VIN =7.5~20V
IOUT =5mA~1.0A
10Hz≤f≤100kHz
IOUT =5mA
VIN =8~18V,f=120Hz
VIN =35V
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
4.80
4.75
62
TYP
5.0
40
-0.6
80
1.8
250
2.0
MAX
5.20
5.25
50
25
50
50
8.0
1.0
0.5
UNIT
V
V
mV
mV
mV
mV
mA
mA
mA
V
mV/C
dB
A
mA
V
4 of 10
QW-R101-010.S
78DXXA

LINEAR INTEGRATED CIRCUIT
ELECTRICAL CHARACTERISTICS(Cont.)
For 78D06A (VIN =11V, IOUT =0.5A)
PARAMETER
Output Voltage
SYMBOL
VOUT
Load Regulation
VOUT
Line Regulation
VOUT
Quiescent Current
Quiescent Current Change
Output Noise Voltage
Temperature coefficient of VOUT
Ripple Rejection
Peak Output Current
Short-Circuit Current
Dropout Voltage
For 78D07A (VIN =13V, IOUT =0.5A)
PARAMETER
Output Voltage
IQ
IQ
eN
VOUT/T
RR
IPEAK
ISC
VD
SYMBOL
VOUT
Load Regulation
VOUT
Line Regulation
VOUT
Quiescent Current
Quiescent Current Change
Output Noise Voltage
Temperature coefficient of VOUT
Ripple Rejection
Peak Output Current
Short-Circuit Current
Dropout Voltage
For 78D08A (VIN =14V, IOUT =0.5A)
PARAMETER
Output Voltage
IQ
IQ
eN
VOUT/T
RR
IPEAK
ISC
VD
SYMBOL
VOUT
Load Regulation
VOUT
Line Regulation
VOUT
Quiescent Current
Quiescent Current Change
Output Noise Voltage
Temperature coefficient of VOUT
Ripple Rejection
Peak Output Current
Short-Circuit Current
Dropout Voltage
IQ
IQ
eN
VOUT/T
RR
IPEAK
ISC
VD
TEST CONDITIONS
IOUT =5mA~1.0A
VIN =8.5~21V, IOUT =5mA~1.0A
IOUT =5mA~1.0A
IOUT =0.25A~0.75A
VIN =8~25V
VIN =8.5~21V, IOUT =1.0A
IOUT≤1.0A
VIN =8.5~21V
IOUT =5mA~1.0A
10Hz≤f≤100kHz
IOUT =5mA
VIN =9~19V,f=120Hz
59
VIN =35V
TEST CONDITIONS
IOUT =5mA~1.0A
VIN =9.5~22V, IOUT =5mA~1.0A
IOUT =5mA~1.0A
IOUT =0.25A~0.75A
VIN =9~25V
VIN =9.5~22V, IOUT =1.0A
IOUT≤1.0A
VIN =9.5~22V
IOUT =5mA~1.0A
10Hz≤f≤100kHz
IOUT =5mA
VIN =10~20V,f=120Hz
MIN
6.72
6.65
59
VIN =35V
TEST CONDITIONS
IOUT =5mA~1.0A
VIN =10.5~23V, IOUT =5mA~1.0A
IOUT =5mA~1.0A
IOUT =0.25A~0.75A
VIN =10.5~25V
VIN =10.5~23V, IOUT =1.0A
IOUT≤1.0A
VIN =10.5~23V
IOUT =5mA~1.0A
10Hz≤f≤100kHz
IOUT =5mA
VIN =11.5~21.5V,f=120Hz
VIN =35V
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
5.76
5.7
MIN
7.68
7.6
56
TYP
6.0
MAX
6.24
6.3
60
30
60
60
8.0
1.0
0.5
UNIT
V
V
mV
mV
mV
mV
mA
mA
mA
V
mV/C
dB
A
mA
V
MAX
7.28
7.35
70
35
70
70
8.0
1.0
0.5
UNIT
V
V
mV
mV
mV
mV
mA
mA
mA
V
mV/C
dB
A
mA
V
MAX
8.32
8.4
80
40
80
80
8.0
1.0
0.5
UNIT
V
V
mV
mV
mV
mV
mA
mA
mA
V
mV/C
dB
A
mA
V
45
-0.7
75
1.8
250
2.0
TYP
7.0
50
-0.8
75
1.7
250
2.0
TYP
8.0
58
-0.9
72
1.8
250
2.0
5 of 10
QW-R101-010.S
78DXXA

LINEAR INTEGRATED CIRCUIT
ELECTRICAL CHARACTERISTICS(Cont.)
For 78D09A (VIN =15V, IOUT =0.5A)
PARAMETER
Output Voltage
SYMBOL
VOUT
Load Regulation
VOUT
Line Regulation
VOUT
Quiescent Current
Quiescent Current Change
IQ
IQ
Output Noise Voltage
Temperature coefficient of VOUT
Ripple Rejection
Peak Output Current
Short-Circuit Current
Dropout Voltage
eN
VOUT/T
RR
IPEAK
ISC
VD
For 78D10A (VIN =16V, IOUT =0.5A)
PARAMETER
SYMBOL
Output Voltage
VOUT
Load Regulation
VOUT
Line Regulation
VOUT
Quiescent Current
Quiescent Current Change
IQ
IQ
Output Noise Voltage
Temperature coefficient of VOUT
Ripple Rejection
Peak Output Current
Short-Circuit Current
Dropout Voltage
eN
VOUT/T
RR
IPEAK
ISC
VD
For 78D12A (VIN =19V, IOUT =0.5A)
PARAMETER
SYMBOL
Output Voltage
VOUT
Load Regulation
VOUT
Line Regulation
VOUT
Quiescent Current
Quiescent Current Change
Output Noise Voltage
Temperature coefficient of VOUT
Ripple Rejection
Peak Output Current
Short-Circuit Current
Dropout Voltage
IQ
IQ
eN
VOUT/T
RR
IPEAK
ISC
VD
TEST CONDITIONS
IOUT =5mA~1.0A
VIN =11.5~24V, IOUT =5mA~1.0A
IOUT =5mA~1.0A
IOUT =0.25A~0.75A
VIN =11.5~25V
VIN =11.5~24V, IOUT =1.0A
IOUT≤1.0A
VIN =11.5~24V
IOUT =5mA~1.0A
10Hz≤f≤100kHz
IOUT =5mA
VIN =12.5~22.5V,f=120Hz
56
VIN =35V
TEST CONDITIONS
IOUT =5mA~1.0A
VIN =12.5~25V, IOUT =5mA~1.0A
IOUT =5mA~1.0A
IOUT =0.25A~0.75A
VIN =13~25V
VIN =13~25V, IOUT =1.0A
IOUT≤1.0A
VIN =12.6V~25V
IOUT =5mA~1.0A
10Hz≤f≤100kHz
IOUT =5mA
VIN =13~23V,f=120Hz
VIN =35V
TEST CONDITIONS
IOUT =5mA~1.0A
VIN =14.5~27V, IOUT =5mA~1.0A
IOUT =5mA~1.0A
IOUT =0.25A~0.75A
VIN =14.5~30V
VIN =14.6~27V, IOUT =1.0A
IOUT≤1.0A
VIN =14.5~30V
IOUT =5mA~1.0A
10Hz≤f≤100kHz
IOUT =5mA
VIN =15~25V,f=120Hz
VIN =35V
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
8.64
8.55
MIN
9.60
9.5
56
TYP
9.0
58
-1.1
72
1.8
250
2.0
MAX
9.36
9.45
90
45
90
90
8.0
1.0
0.5
UNIT
V
V
mV
mV
mV
mV
mA
mA
mA
V
mV/C
dB
A
mA
V
TYP MAX UNIT
10.0 10.40
V
10.5
V
100
mV
50
mV
100
mV
100
mV
8.0
mA
1.0
mA
0.5
mA
58
V
-1.1
mV/C
72
dB
1.8
A
250
mA
2.0
V
MIN TYP MAX UNIT
11.52 12.0 12.48
V
11.4
12.6
V
120
mV
60
mV
120
mV
120
mV
8.0
mA
1.0
mA
0.5
mA
75
V
-1.5
mV/C
55
72
dB
1.8
A
250
mA
2.0
V
6 of 10
QW-R101-010.S
78DXXA

LINEAR INTEGRATED CIRCUIT
ELECTRICAL CHARACTERISTICS(Cont.)
For 78D15A (VIN =23V, IOUT =0.5A)
PARAMETER
Output Voltage
SYMBOL
VOUT
Load Regulation
VOUT
Line Regulation
VOUT
Quiescent Current
Quiescent Current Change
IQ
IQ
Output Noise Voltage
Temperature coefficient of VOUT
Ripple Rejection
Peak Output Current
Short-Circuit Current
Dropout Voltage
eN
VOUT/T
RR
IPEAK
ISC
VD
For 78D18A (VIN =27V, IOUT =0.5A)
PARAMETER
SYMBOL
Output Voltage
VOUT
Load Regulation
VOUT
Line Regulation
VOUT
Quiescent Current
Quiescent Current Change
IQ
IQ
Output Noise Voltage
Temperature coefficient of VOUT
Ripple Rejection
Peak Output Current
Short-Circuit Current
Dropout Voltage
eN
VOUT/T
RR
IPEAK
ISC
VD
For 78D20A (VIN =29V, IOUT =0.5A)
PARAMETER
SYMBOL
Output Voltage
VOUT
Load Regulation
VOUT
Line Regulation
VOUT
Quiescent Current
Quiescent Current Change
Output Noise Voltage
Temperature coefficient of VOUT
Ripple Rejection
Peak Output Current
Short-Circuit Current
Dropout Voltage
IQ
IQ
eN
VOUT/T
RR
IPEAK
ISC
VD
TEST CONDITIONS
IOUT =5mA~1.0A
VIN =17.5~30V, IOUT =5mA~1.0A
IOUT =5mA~1.0A
IOUT =0.25A~0.75A
VIN =18.5~30V
VIN =17.7~30V, IOUT =1.0A
IOUT≤1.0A
VIN =17.5~30V
IOUT =5mA~1.0A
10Hz≤f≤100kHz
IOUT =5mA
VIN =18.5~28.5V,f=120Hz
VIN =35V
TEST CONDITIONS
IOUT=5mA~1.0A
VIN =21~33V, IOUT=5mA~1.0A
IOUT=5mA~1.0A
IOUT=0.25A~0.75A
VIN =21~33V
VIN =21~33V, IOUT =1.0A
IOUT≤1.0A
VIN =21.5~33V
IOUT=5mA~1.0A
10Hz≤f≤100kHz
IOUT =5mA
VIN =22~32V,f=120Hz
VIN =35V
TEST CONDITIONS
IOUT=5mA~1.0A
VIN =23~35V, IOUT=5mA~1.0A
IOUT=5mA~1.0A
IOUT=0.25A~0.75A
VIN =23~35V
VIN =23~35V, IOUT =1.0A
IOUT≤1.0A
VIN =23.5~35V
IOUT=5mA~1.0A
10Hz≤f≤100kHz
IOUT =5mA
VIN =24~34V,f=120Hz
VIN =35V
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN TYP MAX UNIT
14.40 15.0 15.60
V
14.25
15.75
V
150
mV
75
mV
150
mV
150
mV
8.0
mA
1.0
mA
0.5
mA
90
V
-1.8
mV/C
54
70
dB
1.8
A
250
mA
2.0
V
MIN TYP MAX UNIT
17.28 18.0 18.72
V
17.1
18.9
V
180
mV
90
mV
180
mV
180
mV
8.0
mA
1.0
mA
0.5
mA
110
V
-2.2
mV/C
53
69
dB
1.8
A
250
mA
2.0
V
MIN TYP MAX UNIT
19.20 20.0 20.80
V
19.79
20.21
V
200
mV
100
mV
200
mV
200
mV
8.0
mA
1.0
mA
0.5
mA
130
V
-2.6
mV/C
52
68
dB
1.8
A
250
mA
2.0
V
7 of 10
QW-R101-010.S
78DXXA

LINEAR INTEGRATED CIRCUIT
ELECTRICAL CHARACTERISTICS(Cont.)
For 78D24A (VIN=33V, IOUT =0.5A)
PARAMETER
Output Voltage
SYMBOL
VOUT
Load Regulation
VOUT
Line Regulation
VOUT
Quiescent Current
Quiescent Current Change
Output Noise Voltage
Temperature coefficient of VOUT
Ripple Rejection
Peak Output Current
Short-Circuit Current
Dropout Voltage
IQ
IQ
eN
VOUT/T
RR
IPEAK
ISC
VD
TEST CONDITIONS
IOUT=5mA~1.0A
VIN =27~35V, IOUT=5mA~1.0A
IOUT=5mA~1.0A
IOUT=0.25A~0.75A
VIN =27~35V
VIN =27~35V, IOUT =1.0A
IOUT≤1.0A
VIN =28~35V
IOUT=5mA~1.0A
10Hz≤f≤100kHz
IOUT =5mA
VIN =28~35V,f=120Hz
VIN=35V
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN TYP MAX UNIT
23.04 24.0 24.96
V
22.8
25.2
V
240
mV
120
mV
240
mV
240
mV
8.0
mA
1.0
mA
0.5
mA
170
V
-2.8
mV/C
50
66
dB
1.8
A
250
mA
2.0
V
8 of 10
QW-R101-010.S
78DXXA
LINEAR INTEGRATED CIRCUIT
TYPICAL CHARACTERISTICS
Output Voltage vs. Input Voltage
Output Voltage, VOUT (V)
6
VOUT=5V
CIN=0.33uF
5 COUT=0.1uF
TA: Room Temprature
4
IOUT=0A
3
IOUT=0.25A
IOUT=1A
2
1
Circuit Operating Current vs. Input Voltage
6 V =5V
OUT
CIN=0.33uF
5 COUT=0.1uF
TA: Room Temprature
IOUT=0A
4
IOUT=0.25A
Circuit Operating Current, IBIAS (mA)

2
1
0
0
0
6
IOUT=1A
3
1
2 3 4
5 6
7
Input Voltage, VIN (V)
0
8
Bias Current, IB (mA)
VIN=10V
IOUT=0A
2
1
Output Voltage, VOUT (V)
5.4
5.3
VIN=10V
IOUT=5.0mA
5.2
5.1
5.0
4.9
4.8
4.7
4.6
4.5
0
-5 15 35 55 75 95 115 135 155
Junction Temperature, TJ (°C)
-25
-5 15 35 55 75 95 115 135 155
Junction Temperature, TJ (°C)
Short Current, ISC (A)
Dropout Voltage, VD (V)
-25
8
5.5
5
3
2 3 4 5 6 7
Input Voltage, VIN (V)
Output Voltage vs. Junction Temperature
Bias Current vs. Junction Temperature
4
1
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
9 of 10
QW-R101-010.S
78DXXA
Output Voltage
Deviation (mV)
TYPICAL CHARACTERISTICS(Cont.)
Load Current
(mA)
Input Voltage
Change (V)
Output Voltage
Deviation (mV)

LINEAR INTEGRATED CIRCUIT
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
10 of 10
QW-R101-010.S