Product Group: Vishay Dale, Inductors / June 2016 Author: Doug Lillie Tel: 1 605-668-4131 E-mail: [email protected] IWTX-47R0BE-11 6.3 μH Wireless Charging A11 Type Tx Coil for 5 V Applications Saves Space in Qi Wireless Charging Pads Product Benefits: • • • • • • • • • AEC-Q200 qualification pending Powdered iron based WPC-compliant Optimized for 5 V applications Durable construction High permeability shielding Magnetic saturation of 50 % at 4,000 gauss RoHS-compliant device Low inductance Market Applications: • Qi wireless charging pads The News: Vishay Intertechnology introduces a new powdered-iron-based, WPC-compliant (Wireless Power Consortium) wireless charging A11 type transmitter coil for 5 V applications. • 18 % smaller than other solutions on the market to save space • Designed for use in conjunction with Vishay’s WPC-compliant wireless receiver coils • High-saturation powdered iron is not affected by permanent locating magnets • Provides an alternative to larger ferrite-based solutions, which can saturate in the presence of a strong magnetic field Product Group: Vishay Dale, Inductors / June 2016 The Key Specifications: • • • • • • • • • • 50 % magnetic saturation at 4,000 gauss 6.3 µH inductance at 200 kHz +5 % inductance tolerance DCR of 38 mΩ (± 10 %) at +25 ºC Q of 190 typical at 200 kHz 47 mm lead length 5 mm tinned length 7 A heat rated current 22 A saturation current 22 MHz self resonant frequency Availability: Samples and production quantities of the IWTX-47R0BE-11 6.3 μH Tx coil are available now, with lead times of 14 weeks for large orders. To access the product datasheet on the Vishay website, go to http://www.vishay.com/ppg?34429 (IWTX-47R0BE-11 6.3 µH) Contact Information: THE AMERICAS EUROPE ASIA/PACIFIC Doug Lillie Vishay Intertechnology, Inc. [email protected] Jens Walther Vishay Electronic GmbH [email protected] Victor Goh Vishay Asia Pte Ltd. [email protected]