UMH5N / IMH5A Transistors General purpose (dual digital transistors) UMH5N / IMH5A zDimensions (Unit : mm) zFeatures 1) Two DTC124E chips in a EMT or UMT or SMT package. UMH5N zCircuit schematic UMH5N (3) (6) (5) (4) IMH5A (2) (1) (4) R1 (5) (6) R1 R2 R2 R2 R2 R1 (4) (5) (1) (2) (3) R1 (6) (3) R1=R2=22kΩ (2) (1) Each lead has same dimensions ROHM : UMT6 EIAJ : SC-88 R1=R2=22kΩ zAbsolute maximum ratings (Ta = 25°C) Symbol Limits Unit Supply voltage Parameter VCC 50 V Input voltage VIN Output current IO 30 mA IC(MAX) 100 mA Collector current UMH5N Power dissipation IMH5A Pd 40 IMH5A V −10 150(TOTAL) mW 300(TOTAL) Junction temperature Tj 150 °C Storage temperature Tstg −55 to +150 °C UMH5N IMH5A UMT6 SMT6 Marking Code H5 TR H5 T108 Basic ordering unit (pieces) 3000 3000 (6) (3) (2) (1) ∗2 ROHM : SMT6 EIAJ : SC-74 zPackage, marking, and packaging specifications Type (5) ∗1 ∗1 120mW per element must not be exceeded. ∗2 200mW per element must not be exceeded. Package (4) Each lead has same dimensions zElectrical characteristics (Ta = 25°C) Parameter Input voltage Symbol Min. Typ. Max. VI (off) − − 0.5 Unit V Conditions VCC=5V, IO=100µA VI (on) 3 − − Output voltage Input current VO (on) II − − 0.1 − 0.3 0.36 V mA IO=10mA, II=0.5mA VI=5V Output current DC current gain IO (off) GI − 56 − − 0.5 − µA − VCC=50V, VI=0V VO=5V, IO=5mA VO=0.2V, IO=5mA Transition frequency fT − 250 − MHz Input resistance R1 15.4 22 28.6 kΩ − Resistance ratio R2 / R1 0.8 1 1.2 − − VCE=10V, IE= −5mA , f=100MHz ∗ ∗ Characteristics of built-in transistor Rev.C 1/2 UMH5N / IMH5A Transistors zElectrical characteristics curves 10m 5m VO=0.2V OUTPUT CURRENT : Io (A) INPUT VOLTAGE : VI(on) (V) 50 20 10 Ta=−40°C 25°C 100°C 5 2 1 500m 200m 100m 100µ 200µ 500µ 1m 2m 5m 10m 20m 50m 100m OUTPUT CURRENT : IO (A) Fig.1 Input voltage vs. output current (ON characteristics) 1 1k VCC=5V 2m 1m 500µ VO=5V 500 DC CURRENT GAIN : GI 100 Ta=100°C 25°C −40°C 200µ 100µ 50µ 20µ 10µ Ta=100°C 25°C −40°C 200 100 50 20 10 5 5µ 2µ 1µ 0 2 0.5 1.0 1.5 2.0 2.5 3.0 INPUT VOLTAGE : VI(off) (V) Fig.2 Output current vs. input voltage (OFF characteristics) 1 100µ 200µ 500µ 1m 2m 5m 10m 20m 50m 100m OUTPUT CURRENT : IO (A) Fig.3 DC current gain vs. output current lO/lI=20 OUTPUT VOLTAGE : VO(on) (V) 500m 200m Ta=100°C 25°C −40°C 100m 50m 20m 10m 5m 2m 1m 100µ 200µ 500µ 1m 2m 5m 10m 20m 50m 100m OUTPUT CURRENT : IO (A) Fig.4 Output voltage vs. output current Rev.C 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2008 ROHM CO.,LTD. THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0