SM05S THRU SM10S Technical Data Data Sheet N1008, Rev. A Green Products SM05S THRU SM10S SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIERS Features: • • • • • • • Rating to 1000V PRV Ideal for printed circuit board Reliable low cost construction utilizing molded plastic technique results in inexpensive product Lead tin plated copper This is a Pb − Free Device All SMC parts are traceable to the wafer lot Additional testing can be offered upon request Mechanical Data: • • Polarity : Symbol molded on body Mounting position: Any Mechanical Dimensions: In Inches/ mm BTS • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • SM05S THRU SM10S Technical Data Data Sheet N1008, Rev. A Green Products Marking Diagram: Where XXXXX is YYWWL SM05S YY WW L = Part Name = Year = Week = Lot Number Cautions:Molding resin Epoxy resin UL: 94V-0 Ordering Information: Device Package BTS (Pb-Free) SM05S THRU SM10S Shipping 5000 pcs / reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification. Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Characteristic Symbol SM05S SM1S SM2S SM4S SM6S SM8S SM10S Unit Maximum Recurrent Peak Reverse Voltage Maximum DC Blocking Voltage VRRM VDC 50 100 200 400 600 800 1000 V Maximum RMS Reverse Voltage VRMS 35 70 140 280 420 560 700 V Maximum Average Forward Rectified Current IO 0.8 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 30 A Peak Forward Voltage VFM 1.1 V Peak Reverse Current @TA = 25°C At Rated DC Blocking Voltage @TA = 125°C IRM 5 500 µA Typical Junction Capacitance(per leg) (Note 2) CJ 13 pF RθJC 75 °C/W TJ, TSTG -55 to +150 °C @TA = 40°C @IF =0.8A Typical Thermal Resistance (per leg) Operating and Storage Temperature Range Note: 1. Mounted on PC board. . 2. Measured at 1.0 MHZ and applied reverse voltage of 4.0 VDC 3. Thermal resistance junction to case • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • SM05S THRU SM10S Technical Data Data Sheet N1008, Rev. A Green Products • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • SM05S THRU SM10S Technical Data Data Sheet N1008, Rev. A Green Products DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the SMC - Sangdest Microelectronics (Nanjing) Co., Ltd sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). SMC - Sangdest Microelectronics (Nanjing) Co., Ltd assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.. • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com •