KBL10005 THRU KBL1010 Green Products Technical Data Data Sheet N1822 Rev. - KBL10005 THRU KBL1010 SINGLE-PHASE SILICON BRIDGE RECTIFIER Features: • • • • • Reliable low cost construction utilizing molded plastic technique Ideal for printed circuit board Low forward voltage drop Low reverse leakage current High surge current capability Mechanical Data: • • • • • Case: Molded plastic, KBL Epoxy: UL 94V-O rate flame retardant Terminals: Leads solderable per MIL-STD-202, method 208 guaranteed Mounting position: Any Weight: 0.16ounce, 4.6gram Mechanical Dimensions: In mm KBL MARKING, MOLDING RESIN Marking for Type Number, 1st row SSG YYWWL, 2nd row Type Number Where YY is the manufacture year WW is the manufacture week code L is the wafer’s Lot Number • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • KBL10005 THRU KBL1010 Green Products Technical Data Data Sheet N1822 Rev. - Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Maximum Ratings: Symbol KBL 10005 KBL 1001 KBL 1002 KBL 1004 KBL 1006 KBL 1008 KBL 1010 Unit Maximum Recurrent Peak Reverse Voltage Maximum DC Blocking Voltage VRRM VDC 50 100 200 400 600 800 1000 Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Type Number V V Maximum Average Forward Rectified Current.375"(9.5mm) Lead Length at TA=55℃ I(AV) 10.0 A Peak Forward Surge Current, 8.3ms single half-sine-wave superimposed on rated load (JEDEC method) IFSM 300 A Electrical Characteristics: Type Number Symbol KBL 10005 KBL 1001 KBL 1002 KBL 1004 KBL 1006 KBL 1008 KBL 1010 Unit Maximum Forward Voltage at 10.0A DC and 25℃ VF 1.1 V Maximum Reverse Current @TA = 25°C At Rated DC Blocking Voltage @TA = 100°C IRM 10.0 500 µA Thermal-Mechanical Specifications: Type Number Symbol KBL 10005 KBL 1001 KBL 1002 KBL 1004 KBL 1006 KBL 1008 KBL 1010 Unit Typical Thermal Resistance (Note 1) RθJA 18 °C/W Typical Thermal Resistance (Note 2) RθJC 3 °C/W TJ, TSTG -55 to +125 °C Operating and Storage Temperature Range Case Style KBL Note: 1- Units mounted in free air, no heatsink, P.C.B. at 0.375" (9.5mm) lead length with 0.5 x 0.5” (12 x 12mm) copper pads 2- Units mounted on a 3.0 x 3.0” x 0.11" thick (7.5 x 7.5 x 0.3cm) Al. Plate heatsink • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • KBL10005 THRU KBL1010 Technical Data Data Sheet N1822 Rev. - Green Products • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • KBL10005 THRU KBL1010 Technical Data Data Sheet N1822 Rev. - Green Products DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the SMC - Sangdest Microelectronics (Nanjing) Co., Ltd sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). SMC - Sangdest Microelectronics (Nanjing) Co., Ltd assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.. • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com •