KBJ4005G THRU KBJ410G Green Products Technical Data Data Sheet N1818, Rev. - KBJ4005G THRU KBJ410G GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER Features: • • • • • • Glass passivated chip junction KBJ Reliable low cost construction utilizing molded plastic technique Ideal for printed circuit board Low forward voltage drop Low reverse leakage current High surge current capability Mechanical Data: • • • • • Case: Molded plastic, KBJ Epoxy: UL 94V-O rate flame retardant Terminals: Leads solderable per MIL-STD-202, method 208 guaranteed Mounting position: Any Weight: 0.16ounce, 4.6gram Mechanical Dimensions: In Inches/mm KBJ MARKING, MOLDING RESIN Marking for Type Number, 1st row SSG YYWWL, 2nd row Type Number Where YY is the manufacture year WW is the manufacture week code L is the wafer’s Lot Number • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • KBJ4005G THRU KBJ410G Green Products Technical Data Data Sheet N1818, Rev. - Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Maximum Ratings: Symbol KBJ 4005G KBJ 401G KBJ KBJ KBJ KBJ KBJ 402G 404G 406G 408G 410G Unit Maximum Recurrent Peak Reverse Voltage Maximum DC Blocking Voltage VRRM VDC 50 100 200 400 600 800 1000 V RMS Reverse Voltage VRMS 35 70 140 280 420 560 700 V Type Number Maximum Average Forward Rectified Current @TC = 115°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) I(AV) 4.0 A IFSM 120 A Electrical Characteristics: Type Number Symbol KBJ 4005G KBJ 401G KBJ KBJ KBJ KBJ KBJ 402G 404G 406G 408G 410G Unit VFM 1.0 V Peak Reverse Current @TA = 25°C At Rated DC Blocking Voltage @TA = 125°C IR 5.0 500 µA Typical Junction Capacitance (Note 1) CJ 40 pF Maximum Forward Voltage @IF =2.0A Thermal-Mechanical Specifications: Type Number Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range Case Style Symbol KBJ 4005G KBJ 401G KBJ KBJ KBJ KBJ KBJ 402G 404G 406G 408G 410G Unit RθJC 5.5 °C/W TJ, TSTG -55 to +150 °C KBJ Note: 1. Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2. Thermal Resistance from Junction to Case with Device Mounted on 75mm x 75mm x 1.6mmC u Plate Heatsink. • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • KBJ4005G THRU KBJ410G Technical Data Data Sheet N1818, Rev. - Green Products • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • KBJ4005G THRU KBJ410G Technical Data Data Sheet N1818, Rev. - Green Products DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the SMC - Sangdest Microelectronics (Nanjing) Co., Ltd sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). SMC - Sangdest Microelectronics (Nanjing) Co., Ltd assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.. • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com •