NHD-7.0-800480EF-ASXN#-T TFT (Thin-Film-Transistor) Color Liquid Crystal Display Module NHD7.0800480EFASXN#T- Newhaven Display 7.0” Diagonal 800x480 Pixels Model Built-in Driver / No Controller Sunlight Readable TFT TN, Wide Temperature RoHS Compliant Resistive Touch Panel Newhaven Display International, Inc. 2661 Galvin Ct. Elgin IL, 60124 Ph: 847-844-8795 Fax: 847-844-8796 www.newhavendisplay.com [email protected] [email protected] Document Revision History Revision 0 Date 3/10/16 Description Initial Release Functions and Features • • • • • • 800x480 resolution LED backlight 24-bit digital RGB interface 16.7M colors Sunlight Readable 4-wire resistive Touch Panel [2] Changed by SB L A I Mechanical Drawing 3 0.7±0.2 (6) 6.11 (6.5) (49.7) YD 40 DETAIL A 1 22.4±0.5 0.3±0.05 0.3±0.05 1 2 74.93±0.5 1 CENTER LINE 40 1 3.5±0.3 1.75 0.3±0.03 Notes: 1. Display Size: 7.0” TFT 2. Optimal Viewing Direction: 12:00 3. Display Mode: Transmissive / Normally White / Anti-Glare 4. Driver IC: HX8264-D02 5. Power Supply Voltage: 3.3 V D 6. Backlight: White LED / 9.6 V (Typ) / 180 mA 7. Luminance: 780 cd/m² 8. 3M Brightness Enhancement Film 9. Touch Panel: 4-Wire Resistive 4 4-R2 W=0.3±0.03 P0.5X(40-1)=19.5±0.05 0.5±0.1 20.5±0.1 .2 O C P1*3=3 5±0.1 4 STIFFENER (PI) (17.07) 1 10±0.5 1 5±0.3 W=0.5±0.05 P1X3=3±0.1 (86.1) 20.39±0.5 C COMPONENT AREA Newhaven Display PO_WWYY NHD-7.0-800480EF-ASXN#-T DETAIL A A+ KLED CIRCUIT 3*9=27EA,20mA*9=180mA 3 4 6 PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 PIN Assignment 36 37 38 39 40 R0 F N (39) YU YD XL XR 5 (4) 15±1 71±0.5 (4) COMPONENT AREA 1 Contact side 1.5 Max. COVERLAYER OPEN 4 BACK ACTIVE AREA CENTER FRONT E D I XR 78.17±0.5 85.63 A.A 89.1P0.2/BZ OPENING V,A88.52/TP A,A87.52/TP 104±0.3 OUTLINE 99±0.2/TP TEAR TAPE 800(RGB)*480 XL Description T N (80.82) YU B 4.7±0.35 (7.26) 153.84 A.A 5 Rev 36.04 4.5±0.5 165±0.3 164.3±0.2/TP V,A156.68/TP 156.7±0.2/BZ OPENING A,A155.68/TP 4 COVERLAYER OPEN 2 5.3 (5.499) (5.999) (6.889) A 2.019±0.2 1 Date SYMBOL LED-K LED-A GND VDD R0 R1 R2 R3 R4 R5 R6 R7 G0 G1 G2 G3 G4 G5 G6 G7 B0 B1 B2 B3 B4 B5 B6 B7 GND DCLK DISP HSYNC VSYNC DEN NC GND NC(XR) NC(YD) NC(XL) NC(YU) Date 03/10/16 Unit Gen. Tolerance ±0.3mm mm 5 Model: NHD-7.0-800480EF-ASXN#-T 6 The drawing contained herein is the exclusive property of Newhaven Display International, Inc. and shall not be copied, reproduced, and/or disclosed in any format without permission. [3] A B C D Pin Description TFT: Pin No. 1 2 3 4 5-12 13-20 21-28 29 30 31 32 33 34 35 36 37 38 39 40 Symbol LED_K LED_A GND VDD [R0-R7] [G0-G7] [B0-B7] GND DCLK DISP HSYNC VSYNC DEN NC GND NC(XR) NC(YD) NC(XL) NC(YU) Connection Power Supply Power Supply Power Supply Power Supply MPU MPU MPU Power Supply MPU MPU MPU MPU MPU Power Supply - Function Description Backlight Cathode (Ground) Backlight Anode (180mA @ 9.6V) Ground Supply Voltage for LCD and logic (+3.3V) Red Data signals Green Data signals Blue Data signals Ground Dot data Clock Display on/off DISP=1:Display on Line synchronization signal Frame synchronization signal Data Enable signal No Connect Ground No Connect No Connect No Connect No Connect Recommended connector: 0.5mm pitch 40-Conductor FFC. Molex p/n: 54104-4031 (top contact) Resistive Touch Panel: Pin No. 1 2 3 4 Symbol XL YD XR YU Connection Touch Controller Touch Controller Touch Controller Touch Controller Function Description Touch Panel – Left Touch Panel – Down Touch Panel – Right Touch Panel – Up Recommended connector: 1.0mm pitch 4-Conductor FFC. Molex p/n: 52207-0485 (top contact) [4] Electrical Characteristics Item Operating Temperature Range Storage Temperature Range Supply Voltage Supply Current “H” Level Input “L” Level Input “H” Level Output “L” Level Output Backlight Supply Voltage Backlight Supply Current Backlight Lifetime* Symbol Top Tst VDD IDD VIH VIL VOH VOL Condition Absolute Max Absolute Max o VDD=3.3V 25 C - Min. -20 -30 3.0 60 0.7*VDD GND VDD-0.4 - Typ. 3.3 85 - Max. +70 +80 3.6 120 VDD 0.3*VDD GND+0.4 Unit ⁰C ⁰C V mA V V V V VLED ILED - VLED=9.6V ILED = 180 mA Top = 25° C 8.7 20,000 9.6 180 50,000 9.9 - V mA Hrs. Condition ILED = 180 mA - Min. 620 - Typ. - Unit % Ω Ω MΩ V ms g Characters Touches H *Backlight Lifetime is rated as Hours until half-brightness, under normal operating conditions. Optical Characteristics Optimal Viewing Angles Item Top Bottom Left Right Contrast Ratio Luminance Response Time Symbol ϕY+ ϕYθXθX+ Cr L Tr + Tf Touch Panel Characteristics Item Linearity Terminal Resistance – X-Axis Terminal Resistance – Y-Axis Insulation Resistance Operating Voltage Chattering Activation Force Pen Writing Durability Pitting Durability Surface Hardness Min. -3 50 350 20 10 100,000 1,000,000 3 Cr ≥ 10 Max. 3 400 1100 10 10 100 - Driver Information Typ. 60 50 60 60 400 780 25 Max. 35 Built-in HX8264-D02 Source Driver: http://www.newhavendisplay.com/app_notes/HX8264-D02.pdf Built-in HX8664-B Gate Driver: http://www.newhavendisplay.com/app_notes/HX8664-B.pdf [5] Unit ⁰ ⁰ ⁰ ⁰ 2 cd/m ms Timing Characteristics Horizontal Timing Vertical Timing [6] Horizontal Timing Vertical Timing [7] Parallel 24-bit RGB mode Input Clock and Data Timing Source Output Timing [8] Vertical Timing HV (Cascade) Vertical Timing DE (Cascade) Gate Output Timing (Cascade) [9] Vertical Timing HV (Dual Gate) Vertical Timing DE (Dual Gate) Gate Output Timing (Dual Gate) [10] Power ON/OFF Sequence Enter/Exit Standby Mode Sequence [11] Quality Information Test Item Content of Test High Temperature storage Endurance test applying the high storage temperature for a long time. Endurance test applying the low storage temperature for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. Endurance test applying vibration to simulate transportation and use. Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature / Humidity Operation Thermal Shock resistance Vibration test Static electricity test Test Condition Endurance test applying electric static discharge. Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container. 2 -30⁰C , 96hrs 1,2 +70⁰C, 96hrs 2 -20⁰C , 96hrs 1,2 +50⁰C , 90% RH , 96hrs 1,2 -30⁰C, 30min -> 80⁰C, 30min, Change time: 5min, 10 cycles 10-55Hz , 1.5mm amplitude. 60 sec in each of 3 directions X,Y,Z For 15 minutes VS=800V, RS=1.5kΩ, CS=100pF One time Precautions for using LCDs/LCMs See Precautions at www.newhavendisplay.com/specs/precautions.pdf Warranty Information See Terms and Conditions at http://www.newhavendisplay.com/index.php?main_page=terms [12] Note +80⁰C , 96hrs 3