HT46R65/HT46C65 Revision # 2.20 Modifications made on June 6, 2014 In the Features and other related sections, the 56-pin SSOP package was removed. Revision # 2.10 A/D with LCD Type 8-Bit MCU Modifications made on May 13, 2014 In the Features and other related sections, the 52-pin QFP package was changed to a 64-pin LQFP package type. The Package Information section was modified. Revision # 2.00 Modifications made on April 13, 2011 In the Features section and other related sections, the 100-pin QFP package was changed to 100-pin LQFP. Revision # 1.90 Modifications made on February 14, 2006 The A/D Converter section was modified. Revision # 1.80 Modifications made on July 14, 2005 A Technical Document section was added. At the D.C. Characteristics section was modified. At the A.C. Characteristics section, the tLVR was added. The INTC0 (0BH) Register table, the Bit 7 function was modified. In the Oscillator Configuration section, the System Oscillator diagram and note were modified. The TMR0C (0EH) and TMR1C (11H) Register table, the T0E and T1E function were modified. The A/D Converter section was modified. In the Application Circuits section, the entries for OSC3, OSC4 were modified. Revision # 1.70 Modifications made on April 14, 2005 At the Features section, Pin Assignment and Package Information sections, 52-pin QFP package was added. A Note about the 52-pin QFP package was added at the LCD Driver Output section. Revision # 1.60 Modifications made on December 8, 2004 At the D.C. Characteristics table, IOL2 and IOH2 entries were added. At the Program Counter table, Program Memory diagram and other related sections, the A/D Converter Interrupt entries were deleted. At the INTC0 Register table, the label and function description for Bit No. 7 was modified. At the RTCC register table, a "read only" function description for Bit No. 5 was added. Revision # 1.50 Modifications made on September 21, 2004 At the D.C. Characteristics table, the IDD3 Parameter, as well as Typ. and Max. Conditions were modified. At the table below the Application Circuits section, the entries of the column for Crystal or Resonator were modified. A brief functional description for R1 was added at the bottom portion of the table. Revision # 1.40 Modifications made on May 5, 2004 The Product Title was modified from 8-Bit A/D with LCD Type MCU to A/D with LCD Type 8-Bit MCU. At the Block Diagram section, the TMR0, TMR0C, TMR1 and TMR1C portion of the diagram were modified. At the Pin Description table, the OSC1 to OSC4 entries for the I/O column were modified. At the D.C. Characteristics table, the Min. value for the RPH 3V was changed from 40k to 20k and the Max. value from 80k to 100k. At the Functional Description, some of the Interrupt text contents were modified. At the RTCC register table, the Reset value for Bit 0~2 was changed from 0 to 1. Revision # 1.30 Modifications made on March 1, 2004 The Block Diagram was modified. At the Timer/Event Counter section, the labels of the TMR0C and TMR1C tables, and the Timer/Event Counter 0 and Timer/Event Counter 1 diagrams were modified. The modifications were as follows: from PSC0~PSC2 to T0PSC0~T0PSC2, from TE, TON, TM0, TM1 to T0E, T0ON,T0M0, T0M1 respectively, etc. Revision # 1.20 Modifications made on February 3, 2004 At the Features section, Low voltage reset/detector function was added. The Block Diagram was modified. At the D.C. Characteristics table, the VLVR values were changed, Typ. from 3.2V to 3.0V, Max. 3.6V to 3.3V. The Timer/Event Counter 0 and Timer/Event Counter 1 diagrams were modified. At the Timer/Event Counter section, on the topic about PFD selection, a sentence was added discussing if PA3 is set as PFD output. At the PWM section, two was changed to four 8-bit PWM registers. At the Low Voltage Reset section, more text contents were added including two diagrams. Revision # 1.10 Modifications made on January 14, 2004 At the Data Memory section, a paragraph that discussed about accessing the Memory Banks has been added. Revision # 1.01 Modifications made on December 16, 2003 At the Instruction Set Summary and Instruction Definition sections, the missing TABRDL [m] instructions were added back. Revision # 1.00 This was posted on November 17, 2002