HT56RB27 TinyPowerTM A/D Type Smart Card OTP MCU with DAC, ISO 7816 and USB Interfaces Revision # 1.20 Modifications made on April 26, 2013 The DC/DC Converter and LDO Electrical Characteristics sections was modified. In the Program Memory section, the Look-up Table, and Table Program Example content and source code were modified. In the Interrupt section, the Interrupt Structure diagram, INTC1 register and MISC0 register was modified. In the DC/DC Converter and LDO section, the third paragraph and the following diagram were modified. In the Smart Card Interface section, the Elementary Time Unit, Card Detection, Guard Time Counter, UART Interface, Smart Card Interrupt Structure and Programming Considerations were modified. The Application Circuits section was modified. Revision # 1.10 Modifications made on December 12, 2012 In the Selection Table and other related sections, the 44-pin QFP package type was deleted and the 44-pin LQFP package FP3.0mm was changed to FP2.0mm. Revision # 1.00 This was posted on August 6, 2012