Series 35 RAST 2.5 connectors 3520 · 3521 · 3522 · 3523 352...-1 · 352...-2 352100 · 352300 351... 351...-1 · 351...-2 352150 · 351050 · 351550 355... 355099 · 355299 355899 3541 · 3542 · 3545 · 3546 83545 · 83546 357... 357099 357000 3501 · 3500 RAST 2.5 connectors for direct and indirect mating, insulation displacement technology RAST 2.5 connectors for direct and indirect mating, insulation displacement technology RAST 2.5 plus™ connectors for direct and indirect mating, insulation displacement technology, with double-sided keying RAST 2.5 connectors for direct mating, insulation displacement technology, with or without keying rib and closed sides RAST 2.5 connectors for direct mating, insulation displacement technology, with or without keying rib and closed sides RAST 2.5 connectors for direct mating, insulation displacement technology RAST 2.5 pin headers pitch 2.5 mm (0.098") RAST 2.5 pin headers, with double-sided keying RAST 2.5 pin headers, in surface mount technology (SMT), with double-sided keying RAST 2.5 pin headers, insulation displacement technology, with locking latches RAST 2.5 double chassis pin headers RAST 2.5 Power connectors for direct and indirect mating, insulation displacement technology RAST 2.5 Power connector for direct and indirect mating, insulation displacement technology, with double-sided keying RAST 2.5 Power plus™ connector for direct and indirect mating, insulation displacement technology, with double-sided keying RAST 2.5 guide frame and handle latch 3521, 3523 for exterior locking 3520, 3522 with interior locking (locking and keying by means of guide frame or pin header) details on the 352...-1 for flat cables, daisy chain 3510, 3511 3512, 3513 hooks 3515, 3516 hooks 3517, 3518 details on the 351...-1 for flat cables, daisy chain 352150 without locking 351050 with closed sides 351550 with internal locking hooks and closed sides upright 3551, 3553 3550, 3552 angular 3555, 3557 3554, 3556 upright 355099, 355299 with locking latch upright with locking latch and positioning spigot 3541, 3542 without chassis latches 3545, 3546 with latches for chassis mounting 83545, 83546 straight, with locking latches 3570 for direct and indirect mating, locking and keying by means of guide frame or pin header 3575 for direct mating, with or without locking hooks for locking on printed circuit board, with or without keying rib and closed sides locking and keying by means of guide frame or pin header locking and keying by means of guide frame or pin header 3501 for interior locking for connectors 3520..., 3522... 3500 with locking latch for use with connectors 3521..., 3523..., 3570... mating with connectors 3521..., 3523..., 3570... mating with connectors 3521... mating with connectors 3521..., 3523..., 3570... mating with connectors 3521..., 3523..., 3570... mating 3570 with printed circuit board (by means of guide frame 350...) or pin headers 354..., 355..., 83546 3575 with printed circuit board mating with printed circuit board (by means of guide frame 350...) or pin headers 354..., 355..., 83546 mating with printed circuit board (by means of guide frame 350...) or pin headers 3542..., 3546... or pin headers 3552..., 3556, 83546 pitch 5.0 mm (0.197") Direct and indirect mating, for cable-to-board and cable-to-cableconnections, insulation displacement technology. Keying according left (352...) 352...-2 for flat cables or discrete wires to RAST 2.5 standard avoids mis- without locking with lateral locking with internal locking left (351...) 351...-2 for flat cables or discrete wires with locking toes interior locking locking latch interior locking locking latch mating. For signal and load currents up to 6 A, RAST 2.5. Power connectors up to 10 A. mating with printed circuit board (by means of guide frame 350...) or pin headers 354..., 355..., 8354... Contact pitch mating with printed circuit board (by means of guide frame 350...) or pin headers 354..., 355..., 8354... Pole number 3523... 2–10 3522... 3–10 (3522-1 3–5) 352... PBT, V0 according to UL 94 352... M12 PA1, V2 according to UL 94 Contact spring Connectable wire section 2 Rated current 352100 3–11 352300 2–6 2 mating with printed circuit board mating with IMS printed circuit board (352150 by means of guide frame 3500) 2.5 mm 0.22–0.35 mm2 0.35–0.38 mm2 4 A at Tamb 60 °C 2 A at Tamb 100 °C glow-wire resistant (GWT 750 °C), see specification at www.lumberg.com range of values of conductors approved by laboratory tests; covering various geometries of insulation displacement terminations 3–6 mating with connectors 352..., 3570 2.5 mm (always the first mentioned type) or 5.0 mm (second type) 3551, 3555 3–20 3550, 3554 2–20 3552, 3553, 3556, 3557 2–10 351..., 352...50 PBT, V0 according to UL 94 351... M12, 352...50 M12 PA1, V2 according to UL 94 351... CuSn, tin-plated 351...V03 CuSn, tin-plated (Sn/Ag) (pitch 2.5 mm, 2-9 poles and pitch 5.0 mm, 2-5 poles) 351...V102 CuSn, pre-nickel and gold-plated CuSn, tin-plated 0.13–0.45 mm2 3510..., 3512..., 3517..., 2–20 (35...-1 2–10) 3515... 3–18 (3515-1 3–10) 3511..., 3513..., 3518..., 2–10 (35...-1 2–5) 3516 2–10 (3516-1 3–6, 3516-2 3–10) PA1, V0 according to UL 94 Rated voltage 1 mating with printed circuit board 2.5 mm (always the first mentioned type) or 5.0 mm (always the second mentioned type) 3521... 2–20 3520... 4–20 (3520-1 4–10) Insulating body mating with printed circuit board (by means of guide frame 350...) or pin headers 354..., 355..., 8354... 0.13–0.45 mm2 0.22–0.35 mm2 355099 3–11 355299 2–7 2.5 mm 3–11 PA GF1, V0 according to UL 94 35... CuSn, tin-plated 35...V102 CuSn, pre-nickel and gold-plated 355... CuZn, pre-nickel and tin-plated 355...V04 CuZn, pre-nickel and silver-plated (only pitch 5.0 mm) CuZn, pre-nickel and tin-plated 32 V AC (pitch 2.5 mm), 250 V AC (pitch 5.0 mm), 352100 80 V AC, 355899 250 V AC 83545 3–4 83546 2 354... PBT GF, V0 acc. to UL 94 354... M13 PA GF1, V0 acc. to UL 94 PA GF1, V0 according to UL 94 CuSn, tin-plated CuZn, pre-nickel and tin-plated 354... 0.23–0.5 mm2 354...-1 0.34–0.5 mm2 0.14–0.45 mm2 4A 3541..., 3545... 2–12 3542..., 3546... 2–10 355... 4/2 A at Tamb 60/100 °C 355... V04 10/6 A at Tamb 70 °C (pitch 5.0 mm, 2-5-poles/6-10 poles) 4 A at Tamb 60 °C, 2 A at Tamb 100 °C 4 A at Tamb 60 °C, 2 A at Tamb 100 °C, 6 A at Tamb 85 °C (only pitch 5.0 mm) 4 A at Tamb 60 °C 2 A at Tamb 120 °C 83545 160/40 VAC (poll. deg. 2/3) 83546 400/250 VAC (poll. deg. 2/3) 2.5/5.0 mm 5.0 mm 2.5 mm (always the first mentioned type) or 5.0 mm (second type) 2–8 3–20 357..., 357099 PBT GF, V0 according to UL 94 357...M09 PA1, V2 according to UL 94 PA, V0 according to UL 94 PBT GF, V0 according to UL 94 357... Cu alloy, silver-plated 357...V03 Cu alloy, tin-plated (Sn/Ag) 357000 CuSn, tin-plated 357000 V168 CuSn, silver-plated 0.35–0.82 mm2 0.5–0.75 mm2 6 A at Tamb 70 °C 3570... 10 A at Tamb 70 °C (with indirect mating, 2-5 poles) 357...V03 6 A at Tamb 70 °C (max. 4 poles energized) 6 A at Tamb 70 °C 357...V168 6 A at Tamb 70 °C, 10 A at Tamb 70 °C (with indirect mating, 2-4 poles) 2–7 2–10 400 V AC KEYING EFFICIENT HARNESSING of RAST 2.5 connectors according to RAST 2.5 standard 350... · 352... · 354... · 355... · 3570... Indirect connectors 1 * Direct connectors 351... · 3575 Direct connectors are keyed by keying ribs (K) and closed sides (positioning, P). The printed circuit board has matching reliefs. Indirect connectors are keyed by means of keying noses (K). The matching keying windows of the pin header are open (same with guide frame in case of direct mating). 1 a b c d e K * All drawings in view of mating direction (*), from female to male connector. A selection of proposed keyings can be found on the Internet at www.lumberg.com From manual tongs over hand presses, various semiautomatic harnessing machines to our pre- 3521 05 K00 3510 05 K01 mium products, our fully automatic harnessing machines from our VARICON™ line: We offer from one source all options for efficient termination of Examples: Examples: keying: – Direct RAST 2.5 connectors with keying rib, RAST 2.5 Power connectors as well as double-sided keyings are geared to the RAST 2.5 standard without being described by the directive. S y s t e m O ve r v i e w cables with our connectors – no matter if low, middle or high-volume production. keying: 4/5 RAST 2.5 www.lumberg.com · [email protected] Our service technicians are on-call for you worldwide. 3523 03 K32 3511 03 K01 3515 04 K04 40410 · 1510-1.0 · EN 3521 05 K32 keying: adf keying: adf keying: 4/5 positioning: P1, lock: 3