Series 30 Micromodul™ connectors pitch 1.27 mm (0.050") Series 31 Minimodul™ connectors MICAL · MICALD MICA 302299 MICS... Micromodul™ solder-in connector, insulation displacement technology Micromodul™ connector for direct mating, insulation displacement technology Micromodul™ connector for direct mating, insulation displacement technology, with locking on printed circuit board by means of locking hooks and toes, with closed sides Micromodul™ tab headers for flat cables and discrete conductors for THT soldering MICS upright, with retaining hooks MICS-D upright, without hooks MICSW angular, without hooks solder contacts dual row staggered (MICS-D dual row parallel) pitch 2.5 mm (0.098") Ideal for cable-to-board connections where space is at a premium. Series 38 3114 · 3111 2,5 MSF... 2,5 MSFW... Minimodul™ connectors, crimp technology Minimodul™ pin headers, upright with guide collar Minimodul™ pin headers, angular with guide collar Cable-to-board and board-to-board solder contacts MICAL dual row staggered MICALD dual row parallel MICA in bulk MICA VP3 on reel For signal and low load currents up to 1.2 A. connections: easy harnessing of single leads and flat cables with crimp technology. Especially suitable for low and middle-volume mating with printed circuit board mating with tab headers MICS... mating with printed circuit board crimp contacts 3111 ... L in bulk 3111 ... G on reel 3810 3823 · 3111 385... · 8385 pitch 2.5 mm (0.098") Multimodul™ solder-in connector, insulation displacement technology, with insulator crimp as strain relief and positioning spigots Multimodul™ connectors, crimp technology Multimodul™ pin headers with guide collar and locking latch solder contacts single row 2,5 MSF/O 2,5 MSF with locking latch solder contacts single row 2,5 MSFW/O 2,5 MSFW with locking latch 3810 empty socket housing 3823 board connections. Easy harnessing of single leads and flat cables mating with pin headers 2,5 MSF... mating with connectors 3114/3111, 4143 01 mating with connectors 3114/3111, 4143 01 PBT, V0 nach UL 94 PA GF, V0 nach UL 94 PA GF, V0 nach UL 94 Insulating body PBT, V0 according to UL 94 PA GF1, V0 according to UL 94 Insulating body Contact spring CuSn, tin-plated MICA SEL 0.8 AU CuSn, gold-plated in contact area, tin-plated in insulation displacement area 302299 CuSn, pre-nickel and tinplated 302299 V122 CuSn, pre-nickel and gold-plated in contact area, tin-plated in insulation displacement area CuZn, pre-nickel and tin-plated Contact spring CuSn, tin-plated CuZn, pre-nickel and tin-plated Contact spring AWG 28 (0.090 mm2) AWG 26 (0.135 mm2) AWG 26 (0.140 mm2) AWG 28 (0.090 mm2) 1 2 32 V AC 125 V AC glow-wire resistant (GWT 750 °C), see specification at www.lumberg.com range of values of conductors approved by laboratory tests; covering various geometries of insulation displacement terminations 32 V AC Socket board for direct mating, with or without keying rib, pitch 5.08 mm solder pins for board-to-board or 8510 8514 mating with printed circuit board mating with printed circuit board 6 3–4 PA GF1, V0 according to UL 94 PPE/PS GF, V1 according to UL 94 8514 M13 PA GF1, V0 acc. to UL 94 solder eyes for cable-to-board connections. With accessory keying inserts, mounting and guide flanges. For signal and load currents up to 2–20 mating with printed circuit board up to 5 A. Insulating body Rated voltage Pole number Connectable wire section 2 Socket board for direct mating, pitch 2.54 mm 5 A. For signal and low load currents 4–26 1.2 A 3850 upright, with retaining hooks 3853 angular, with retaining hooks 8385 double, feed-through connector for chassis mounting production. 2–22 Rated current crimp contacts 3111 ... L in bulk 3111 ... G on reel crimp technology. Especially suit- 4–26 Connectable wire section 2 8514 pitch 5.08 mm (0.200") For signal and low load currents up to 5 A. pitch 2.54 mm (0.100") 8510 Sockets boards for insert cards, with with insulation displacement and solder contacts dual row staggered 2,5 MSFQ with locking latch Direct connectors for insert cards able for middle and high-volume mating with connector MICA... Pole number Multimodul™ connectors For cable-to-board and board-toempty socket housing 3114 production. for SMT soldering MICS/SMD upright, in bulk MICS/SMD RP upright, on reel solder contacts dual row staggered Series 51 mating with pin headers 385..., 8385 2–20 (8385 2) Pole number 3111 01 ... 0.10–0.25 mm2 3111 03 ... 0.30–0.60 mm2 Connectable wire section 2 mating with connectors 382..., 4143 01 PA GF1, V0 according to UL 94 3823 00 PBT GF, V0 acc. to UL 94 3823 30 PA GF1, V0 acc. to UL 94 CuSn, tin-plated 0.196–0.22 mm2 3111 01... 0.10–0.25 mm2 3111 03... 0.30–0.60 mm2 Pole number PA GF1, V0 according to UL 94 (8385 PBT, V0 according to UL 94) Insulating body CuZn, pre-nickel and tin-plated Contact spring CuSn, pre-nickel and tin-plated 5 A at Tamb 60 °C Rated current 5 A at Tamb 30 °C 2.5 A at Tamb 70 °C 5A Rated current 3A 5 A at Tamb 30 °C 2.5 A at Tamb 70 °C 3 A at Tamb 60 °C Rated current Rated voltage 125 V AC (with pitch 2.5 mm) 250 V AC (with pitch 5.0 mm) 160 V AC Rated voltage 63 V AC 200 V AC (pollution degree 2) 63 V AC (pollution degree 3) 160 V AC Rated voltage 160 V AC 250 V AC Series 60 Service-friendly: quick and easy connecting and detaching of con- Series 61 ductors. For all cable-to-board connections relevant to maintainance, string- Series 65 able without loss of pitch. Space-saving solution of pluggable screw termination, no mismating, Series 67 with locking. Connectors with screw terminals and insulation displacement termination for automated harnessing, many versions. Compatible mating Spring terminal blocks For signal and load currents up to Screw terminal blocks 10 A. pitch 5.08 mm (0.200") For signal and load currents up to 16 A. pitch 3.5 · 5.0 · 5.08 · 10.0 mm Pluggable screw terminal blocks on socket boards pitch 5.0 mm (0.197") For signal and load currents up to 10 A. Pluggable terminal blocks on pin headers with many products in the market. pitch 5.08 mm (0.200") 16 A. For signal and load currents up to (0.138" · 0.197" · 0.200“ · 0.394") MX...-508 KRMC KS... 6770 Spring terminal blocks Micro screw terminal blocks Puggable screw terminal blocks, with locking and clamps with wire protectors upright MX 122-508 pitch 3.5 mm (0.138") KRMC with wire protector Puggable terminal block, insulation displacement technology, with locking and test holes 6770 cable departure straight or angular 10 A · 300 V AC · poles 2–4, 6 and 8 6 A · 250 V AC · poles 2–8 10 A · 250 V AC · poles 2–10 6 A · 250 V AC · poles 2–7 KRE... KRES... · KRM KB... MC...-508 Screw terminal blocks, with lift clamps with protection against missplacing, upright Screw terminal blocks, clamps with wire protector Socket boards Puggable screw terminal blocks, with locking, with lift clamp pitch 5.0 mm (0.197") KRE with screws M2, 0.4 Nm KREG with screws M3, 0.5 Nm pitch 5.0 mm (0.197") upright KRESS KRM with dovetail joint upright KB solder pins single row KBQ solder pins dual row stagered cable departure angular, 90° MC 200-508 on side of locking angular, solder pins single row KBWO KBW with retaining hooks cable departure straight, 180° MC 100-508 screw 90° for mating direction MC 310-508 screw 180° for mating direction, with combined screw 10 A · 250 V AC · poles 2–10 16 A · 300 V AC (MC 100-508 400 V AC) · poles 2–8 (MC 100-508 2–12) pitch 10.0 mm (0.394"), for mains supply, with imprint PE N L1 KREN with screws M2, 0.4 Nm KRENG with screws M3, 0.5 Nm 15 A · 250 V AC (KREN, KRENG 500 V AC) · poles 2–18 (KREN, KRENG 3) angular KRESW 45° KRESL 90° 15 A · 250 V AC · poles 2–16 (KRESW 2–12, KRM 2–12, 6) 632... KRES...03/02-... ME...-508 Miniature screw terminal blocks, with lift clamps and with test holes Screw terminal blocks, clamps with wire protector Pin headers pitch 5.0 mm (0.197") 6320 upright 6322 35° angular 6324 90° angular pitch 10.0 mm (0.394") upright KRESS 03/02–09/05 angular KRESW 03/02–07/04 45° KRESL 03/02–07/04 90° 16 A · 630 V AC · poles 2–4 15 A · 630 V AC · poles KRESS... 2–5, KRESW... 2, 4 and KRESL... 2–4, upright ME 020-508 without sidewalls ME 040-508 with sidewalls angular ME 010-508 without sidewalls ME 030-508 with sidewalls 16 A · 300 V AC · poles 2–8 (ME 030-508 2–12) System Overview Micromodul · Minimodul · Multimodul www.lumberg.com · [email protected] Insulation Displacement and Crimp Technology · Screw Terminal Blocks 140028 · 1510-1.0 · EN angular MX 222-508 KS without sidewalls KSC with sidewalls