NHD-4.3-480272EF-ASXV# TFT (Thin-Film-Transistor) Color Liquid Crystal Display Module NHD4.3480272EFASXV#- Newhaven Display 4.3” Diagonal 480xRGBx272 Pixels Model Built-in Driver / No Controller High Brightness, White LED Backlight TFT MVA Type, Wide Temperature RoHS Compliant Newhaven Display International, Inc. 2661 Galvin Ct. Elgin IL, 60124 Ph: 847-844-8795 Fax: 847-844-8796 www.newhavendisplay.com [email protected] [email protected] Document Revision History Revision 0 1 2 3 Date 4/29/2014 6/24/2014 8/11/15 12/21/15 Description Initial Release Timing characteristics updated Part number changed from ATXV#-3 to ASXV# Added Backlight Lifetime Rating, Datasheet Reformat Functions and Features • • • • • 480xRGBx272 resolution, up to 16.7M colors 16-LED backlight 24 bit RGB interface Wide viewing angle from all sides Resistive and Capacitive touch panel available [2] Changed by ML ML AK SB L A I Mechanical Drawing 1 2 3 4 A Rev O C 1 2 6 Date T N F N NOTES: 1. Display Size: 4.3” TFT 2. Viewing Direction; Full View 3. Display Mode: Transmissive / Normally White / Anti-Glare 4. Driver IC: HX8257A D 5. Power Supply Voltage: 3.3 V 6. Backlight: White LED / 25.6 V (Typ) / 40 mA 7. Luminance 850 cd/m² (Typ) 8. 3M Brightness Enhancement Film Description E D I B C 5 A B C D Date 12/21/15 Unit Gen. Tolerance ±0.3mm 3 4 mm 5 Model: NHD-4.3-480272EF-ASXV# 6 The drawing contained herein is the exclusive property of Newhaven Display International, Inc. and shall not be copied, reproduced, and/or disclosed in any format without permission. [3] Pin Description Pin No. 1 2 3 4 5-12 13-20 21-28 29 30 31 32 33 34 35 36 37 38 39 40 Symbol LEDLED+ GND VDD [R0-R7] [G0-G7] [B0-B7] GND CLK DISP HSYNC VSYNC DE NC GND NC NC NC NC External Connection Power Supply Power Supply Power Supply Power Supply MPU MPU MPU Power Supply MPU MPU MPU MPU MPU Power Supply - Function Description Backlight Cathode (Ground) Backlight Anode (40mA @ 25.6V) Ground Supply Voltage for LCD and logic (3.3V) Red Data signals Green Data signals Blue Data signals Ground Data sample Clock signal Display ON/OFF signal Line synchronization signal Frame synchronization signal Data Enable signal No Connect Ground No Connect No Connect No Connect No Connect Recommended LCD connector: 0.5mm pitch 40-pin FFC. Backlight connector: on LCD connector Molex p/n: 54104-4031 [4] Electrical Characteristics Item Operating Temperature Range Storage Temperature Range Supply Voltage Supply Current “H” level input “L” level input “H” level output “L” level output Backlight Supply Voltage Backlight Supply Current Backlight Lifetime* Symbol Top Tst VDD IDD Vih Vil Voh Vol Condition Absolute Max Absolute Max VDD = 3.3 V - Min. -20 -30 3.0 10 0.8*VDD GND 0.9*VDD GND Typ. 3.3 28 - Max. +70 +80 3.6 50 VDD 0.2*VDD VDD 0.1*VDD Unit ⁰C ⁰C V mA V V V V VLED ILED - VLED = 25.6V ILED = 40 mA Top = 25° C 23.2 20,000 25.6 40 50,000 28 - V mA Hrs. Condition Min. 60 60 60 60 400 680 - *Backlight lifetime is rates as Hours until half-brightness, under normal operating conditions. Optical Characteristics Optimal Viewing Angles Item Top Bottom Left Right Contrast Ratio Luminance Response Time Rise Fall Symbol ϕY+ ϕYθXθX+ Cr Lv Tr Tf Cr ≥ 10 - Driver Information Typ. 75 75 75 75 500 850 25 25 Max. 30 30 Built-in Himax HX8257-A driver. Please download specification at http://www.newhavendisplay.com/app_notes/HX8257.pdf [5] Unit ⁰ ⁰ ⁰ ⁰ 2 cd/m ms ms Timing Characteristics Parallel RGB input timing requirement [6] [7] Input setup timing requirement [8] [9] Quality Information Test Item Content of Test High Temperature storage Endurance test applying the high storage temperature for a long time. Endurance test applying the low storage temperature for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. Endurance test applying vibration to simulate transportation and use. Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature / Humidity Operation Thermal Shock resistance Vibration test Static electricity test Test Condition Endurance test applying electric static discharge. Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container. 2 -30⁰C , 96hrs 1,2 +70⁰C , 96hrs 2 -20⁰C , 96hrs 1,2 +60⁰C , 90% RH , 96hrs 1,2 -20⁰C,30min -> 25⁰C,5min >70⁰C,30min = 1 cycle 10 cycles 10-55Hz , 15mm amplitude. 60 sec in each of 3 directions X,Y,Z For 15 minutes VS=800V, RS=1.5kΩ, CS=100pF One time Precautions for using LCDs/LCMs See Precautions at www.newhavendisplay.com/specs/precautions.pdf Warranty Information See Terms & Conditions at http://www.newhavendisplay.com/index.php?main_page=terms [10] Note +80⁰C , 96hrs 3