Product Group: Vishay Semiconductors, Optoelectronics / October 2015 Author: John Fisher Tel: +49 7131 67 2612 E-mail: [email protected] New “E” Option for IR Receivers and Sensors in SurfaceMount Belobog Package Offers Extended Storage Temperature Range, Operating Temperature Range, and Floor Life Product Benefits: Storage temperature range of -40 C to +110 C Operating temperature range of -30 °C to +85 °C Floor life of 168 hours per MSL 3 Ultra-low 0.8 mm profile Extremely wide 150 angle of sensitivity Supply voltage from 2.5 V to 5.5 V Very low supply current down to 0.35 mA at 3.3 V Improved immunity against ambient light Insensitive to supply voltage and ripple noise TSOP37xxxE and TSOP57xxxE series receivers are offered in four automatic gain control (AGC) versions for short and long burst codes RoHS-compliant, halogen-free, and Vishay Green Market Applications: Outdoor remote control, sensor, and proximity sensing applications such as parking space sensors, light barrier systems, and in-car entertainment systems Any application where the IR receiver will be exposed to wide daily temperature variations or need to operate in hot or cold temperature extremes The News: Vishay Intertechnology broadens its optoelectronics portfolio with the introduction of a new “E” option for its popular TSOP37xxx, TSOP57xxx, and TSSP57xxx series of infrared (IR) receivers and sensors in the surface-mount Belobog package. Devices with the “E” option feature an extended storage temperature range of -40 C to +110 C, extended operating temperature range of -30 °C to +85 °C, and extended floor life of 168 hours per MSL 3. Provide a more robust package design for increased reliability in outdoor applications that are exposed to wide daily temperature variations and extremes Lensless devices provide on-axis sensitivity equal to any surface-mount IR receiver on the market At an off-axis angle of 45, the devices retain 85 % of their on-axis sensitivity — much higher than receivers with a lens Simplify designs by offering a photo detector and preamplifier circuit in a single epoxy package TSOP37xxxE and TSOP57xxxE series receivers suppress spurious pulses from energy-saving fluorescent lamps and other continuously transmitted optical noise signals TSSP57xxxE devices are optimized for sensor and proximity sensing applications Product Group: Vishay Semiconductors, Optoelectronics / October 2015 The Perspective: While the standard storage and operating temperature range for Vishay’s standard IR receivers is 25 °C to +85 °C, devices with the “E” option feature an extended storage temperature range of -40 C to +110 C and extended operating temperature range of -30 °C to +85 °C. All products in the Belobog series feature floor life of 168 hours per MSL 3. The standard versions of the TSOP37xxx, TSOP57xxx, and TSSP57xxx IR receivers are designed for remote control applications such as digital still cameras, consumer televisions, and set-top boxes. With the extended storage and operating temperature ranges, the TSOP37xxxE, TSOP57xxxE, and TSSP57xxxE receivers provide a more robust package design for increased reliability in outdoor applications — including parking space sensors, light barrier systems, and in-car entertainment systems — that are exposed to wide daily temperature variations, and temperature extremes in northern and southern geographical locations. The Key Specifications: The following devices are available with the “E” option, details about which are available at http://www.vishay.com/doc?82738. Part number TSOP37S40 TSOP372xx TSOP373xx TSOP374xx TSOP375xx Carrier frequency 40 kHz 36 kHz to 56 kHz 36 kHz to 56 kHz 36 kHz to 56 kHz 36 kHz to 56 kHz AGC AGC-S (Sony) AGC-2 (long burst) AGC-3 (short burst) AGC-4 (long burst) AGC-5 (short burst) Supply current 0.35 mA at 3.3 V 0.35 mA at 3.3 V 0.35 mA at 3.3 V 0.35 mA at 3.3 V 0.35 mA at 3.3 V TSOP572xx TSOP574xx 36 kHz to 56 kHz 36 kHz to 56 kHz AGC-2 (long burst) AGC-4 (long burst) 0.7 mA at 5 V 0.7 mA at 5 V TSOP573xx TSOP575xx TSSP57P38 TSSP57038 36 kHz to 56 kHz 36 kHz to 56 kHz 38 kHz 38 kHz AGC-3 (short burst) AGC-5 (short burst) — — 0.7 mA at 5 V 0.7 mA at 5 V 0.7 mA at 5 V 0.7 mA at 5 V Availability: Samples and production quantities of the TSOP37xxxE, TSOP57xxxE, and TSSP57xxxE are available now, with lead times of four weeks. To access the product datasheets on the Vishay Website, go to: http://www.vishay.com/doc?82738 (E option details) http://www.vishay.com/ppg?82671 (TSOP37S40) http://www.vishay.com/ppg?82599 (TSOP372xx, TSOP374xx) http://www.vishay.com/ppg?82446 (TSOP373xx, TSOP375xx) http://www.vishay.com/ppg?82434 (TSOP572xx, TSOP574xx) http://www.vishay.com/ppg?82450 (TSOP573xx, TSOP575xx) http://www.vishay.com/ppg?82480 (TSSP57P38) http://www.vishay.com/ppg?82482 (TSSP57038) Product Group: Vishay Semiconductors, Optoelectronics / October 2015 Contact Information: THE AMERICAS Mr. Dale Henderson [email protected] EUROPE Mr. Kai Rottenberger [email protected] ASIA/PACIFIC Mr. Jason Soon [email protected]