Connectivity solutions for photovoltaic power systems LC3®-CX, LC4®-CX – Connector auXiliaries LC3-CX CM47 Processing machine for termination of LC3® photovoltaic connectors with crimp contacts 1. Range of applications Photovoltaic connectors LC3-CP 1..., LC3-CP 3... Connectable conductors crimp terminal Photovoltaic cable, double-insulated1 Section 2.5 mm2* (AWG 14) 4.0 mm2 (AWG 12) 6.0 mm2 (AWG 10) 2. Features Applications Machine cycle Stroke capacity - middle and high-volume production ca 1 s ca 600/h Integrated counter Stroke release by security foot switch Fast and easy changing of crimp tool without adjusting Optional features: * processing tool for section 2.5 mm² (AWG 14) 3. Dimensions and supply data Dimensions (H x W x D) Weight Electric power supply 1 290 mm x 270 mm x 390 mm ca 13 kg 230 V/50 Hz wire construction preferably according to IEC 60228 class 5, otherwise crimp connection must be tested ated al autom Addition upon request solutions LC4-CX CM48 Pneumatic processing machine for termination of LC4® photovoltaic connectors with crimp contacts 1. Range of applications Photovoltaic connectors LC4-CP 1..., LC4-CP 3... Connectable conductors crimp terminal Photovoltaic cable, double-insulated1 Section 2.5 mm2 (AWG 14) 4.0 mm2 (AWG 12) 6.0 mm2 (AWG 10) 2. Features Applications Machine cycle Stroke capacity - middle and high-volume production 1s ca 600/h Integrated counter Stroke release by security foot switch 3. Dimensions and supply data Dimensions (H x W x D) Weight Electric power supply Compressed air supply 1 500 mm x 280 mm x 325 mm ca 30 kg 230 V/50 Hz 6 bar wire construction preferably according to IEC 60228 class 5, otherwise crimp connection must be tested ated al autom Addition upon request solutions www.lumberg.com 11/2012