Taping, Labeling, Storage, Packing and Marking Vishay Semiconductors Taping, Labeling, Storage, Packing and Marking Vishay Semiconductor Standard Bar Code Labels Standard bar code labels for finished goods The standard bar code labels are product labels and used for identification of goods. The finished goods are packed in final packing area. The standard packing units are labeled with standard bar code (3-of-9 bar code (code 39) conforming MIL-STD1189) before transported as finished goods to warehouses. The labels are on each packing unit with Vishay Semiconductor GmbH specific data. The content of the label is show in the following table and figure 1. In future a change from 1D to 2D bar codes can be expected. That one will look like as shown in figure 2. For transceivers the following logos are used inside the bar code label which are shown in figure 3. The following lead (Pb)-free categories (see figure 1 to figure 3) are meant to describe the lead (Pb)-free 2nd level interconnect terminal finish/material of components and/or the solder used in board assembly. e1 SnAgCu (shall not be included in category 2) e2 Sn alloys with no Bi or Zn excluding SnAgCu e3 Sn e4 Precious metal (e.g. Ag, Au, NiPd, NiPdAu) (no Sn) e5 SnZn, SnZnx (no Bi) e6 contains Bi e7 low temperature solder (≤ 150 °C) containing Indium (no Bi) e0, e8, e9 symbol are unassigned Lead (Pb)-free category e3 – Sn Origin Machine (CPU) number QA acceptance seal Device type QA signature and date Plant location code Lead (Pb)-free logo Device selection code Date code Lot number Quantity RoHS compliance logo Working week day and shift 19873 Remark: Multi - Date Codes would be marked in the QA field of this label on top of the lead Figure 1. Bar Code Label, Detailed Description Terminations Lead (Pb)-free designed ESD 19874 Totally Lead (Pb)-free designed Lead (Pb)-free categories 19877 Figure 2. 2D Bar Code Label (according the Bar Code Standard for 2D Label PDF 417) for a Lead (Pb)-free Device, Equivalent to that Shown in Figure 11. Document Number: 82601 Rev. 1.9, 20-Feb-09 Figure 3. Logos Inside the Label For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 Taping, Labeling, Storage, Packing and Marking Vishay Semiconductors Moisture Proof Packing The reel with the taped components is packed in a moisture proof aluminum bag to protect the devices from absorbing moisture during transportation and storage. This bag finally is packed in a cardboard box. On the reel as well as on the bag and the box are labels, which are described in the following (see figure 4). This is an example and little variations may be between different plants. Pb-free information is part of the bar code label, but when it is missing there a "lead (Pb)-free" -label (figure 8) may be attached. In addition the "Moisture-Sensitive Identification Label (MSID)" is applied (figure 9). Moisture level sticker Bar code ESD sticker label Aluminum bag Box 0 19880 Figure 7. Product (Top) and Taping Label Reel 18298 Figure 4. Moisture Proof Packing Inside the aluminum bag is with the reel a desiccant bag and a humidity indicator (figure 5). 19881 Figure 8. Lead (Pb)-free Logo 19878 Figure 5. Desiccant Bag (example, left) and Humidity Indicator Card On the reel are the bar code product label and taping label (figure 7) and a yellow ESD sticker (figure 6). 19882 Figure 9. Moisture-Sensitive Identification Label (MSID) 19879 Figure 6. ESD Sticker www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number: 82601 [email protected], [email protected], [email protected] Rev. 1.9, 20-Feb-09 Taping, Labeling, Storage, Packing and Marking Vishay Semiconductors On the bag the same stickers as on the reel will be shown. In addition there the moisture-sensitivity caution label as shown in figure 10 describes the storage and drying procedures. CAUTION This bag contains MOISTURE-SENSITIVE DEVICES LEVEL 4 1. Shelf life in sealed bag: 12 months at < 40 °C and < 90 % relative humidity (RH) 2. After this bag is opened, devices that will be subjected to soldering reflow or equivalent processing (peak package body temp. 260 °C) must be 2a. Mounted within 72 hours at factory condition of < 30 °C/60 % RH or 2b. Stored at < 5 % RH 3. Devices require baking befor mounting if: Humidity Indicator Card is > 10 % when read at 23 °C ± 5 °C or 2a. or 2b. are not met. 4. If baking is required, devices may be baked for: 192 hours at 40 °C + 5 °C/- 0 °C and < 5 % RH (dry air/nitrogen) or 96 hours at 60 °C ± 5 °C and < 5 % RH for all device containers or 24 hours at 125 °C ± 5 °C not suitable for reels or tubes Bag Seal Date: (If blank, see barcode label) Note: Level and body temperature defined by EIA JEDEC Standard JSTD-020 Figure 10. EIA JEDEC Standard JSTD-020 Level 4 Label is included on all Dry Bags In the following two reels of different size are shown with the labeling (figure 11 and figure 12). Figure 12. 330-mm Reel with Labels. No Labels on the Rear. Lead (Pb)-free Information is on the Bar Code Label. Final Packing The sealed reel is packed into a cardboard box, which is 334 x 335 x 40 mm3 in size. A secondary cardboard box is used for shipping purposes, with the following sizes, slightly different for different production locations, see the following tables. Table 2. Secondary boxes Malaysia, location code 68 Size, Length x Width x Heigth mm x mm x mm Quantity of Boxes 360 x 360 x 45 1 360 x 360 x 120 2 360 x 360 x 200 5 360 x 360 x 340 8 675 x 355 x 375 16 620 x 530 x 480 26 625 x 525 x 640 30 1000 x 600 x 580 60 Philippines, location code 19 Size, Length x Width x Heigth mm x mm x mm Quantity of Boxes 360 x 360 x 130 2 380 x 380 x 260 5 370 x 360 x 620 11 730 x 380 x 570 20 On the boxes the same labels as on the bag will be found. Recommended Method of Storage 19889 Figure 11. 180-mm Reel with Labels. No Labels on the rear. Lead (Pb)-free Marking is not on the Bar Code; here an additional Lead (Pb)-free Sticker is applied. Document Number: 82601 Rev. 1.9, 20-Feb-09 Dry box storage is recommended as soon as the dry bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: • Storage temperature 10 °C to 30 °C • Storage humidity ≤ 60 % RH max. After more than 72 h under these conditions moisture content will be too high for reflow soldering. In case of moisture absorption, the devices will recover to the former condition by drying under the conditions given in the label on the aluminum bag as shown in figure 5. Such an EIA JEDEC standard JSTD-020 level 4 label is included on all dry bags (see figure 10). For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 Taping, Labeling, Storage, Packing and Marking Vishay Semiconductors ESD Precaution Proper storage and handling procedures should be followed to prevent ESD damage to the devices especially when these are removed from the antistatic shielding bag. “Electro-static sensitive devices”warning labels (figure 6) are affixed on the packaging. Order Information, Related Packing Units, Tape and Reel Size and Labeling In this document the packing and labeling information for IR transceivers is compiled. Part TFBS2711X01-TR1 TFBS2711X01-TR3 TFBS4601-TR1 TFBS4601-TR3 TFBS4650-TR1 TFBS4650-TR3 TFBS4650-TR4 TFBS4650-TT3 TFBS4652-TR1 TFBS4652-TR3 TFBS4656-TR1 TFBS4656-TR3 TFBS4701-TR1 TFBS4701-TR3 TFBS4710-TR1 TFBS4711-TT1 TFBS4711-TR1 TFBS4711-TR3 TFBS5700-TR3 TFBS6626-TR1 TFBS6626-TR3 TFBS6711-TR1 TFBS6711-TR3 TFBS6711-TT1 TFBS6711-TT3 TFBU4101-TR3 TFBU4101-TT3 TFDU4300-TR1 TFDU2201-TR1 TFDU2201-TR3 TFDU4300-TR3 TFDU4300-TT1 TFDU4300-TT3 TFDU6300-TR3 TFDU6300-TT3 TFDU6301-TR3 TFDU6301-TT3 TFDU6103-TR3 TFDU6103-TT3 TFDU6126-TR3 TFDU6126-TT3 TFDU8108-TR3 TFDU8108-TT3 TOIM4232-TR3 TOIM5232-TR3 Description Orientation in tape for mounting Side view Side view Side view Side view Side view Side view Side view Top view Side view Side view Side view Side view Side view Side view Side view Top view Side view Side view Side view Side view Side view Side view Side view Top view Top view Side view Top view Side view Side view Side view Side view Top view Top view Side view Top view Side view Top view Side view Top view Side view Top view Side view Top view Top view Top view Quantity/Reel Pcs 1000 2500 1000 2500 1000 2500 6000 2500 1000 2500 1000 2500 1000 2500 1000 1000 1000 2500 2500 1000 2500 1000 2500 1000 2500 1000 1000 750 750 2250 2500 750 2500 2500 2500 2500 2500 1000 1000 1000 1000 1000 1000 1500 6000 Tape Drawing-no. 16 16 14 14 14 14 15 26 14 14 14 14 16 16 20 17 16 16 14 14 14 16 16 17 17 22 23 18 21 21 18 19 19 18 19 18 19 22 23 22 23 22 23 24 25 Reel Reel no in reel table 1 2 1 2 1 2 2 2 2 2 2 2 1 2 2 1 1 2 2 2 2 1 2 1 2 3 3 1 1 2 2 1 2 2 2 2 2 3 3 3 3 3 3 2 4 Table1. Transceiver tape drawing and reel size reference according to type order text www.vishay.com 4 For technical questions within your region, please contact one of the following: Document Number: 82601 [email protected], [email protected], [email protected] Rev. 1.9, 20-Feb-09 Taping, Labeling, Storage, Packing and Marking Vishay Semiconductors Shape of Reel and Dimensions in mm Drawing-No.: 9.800-5090.01-4 Issue: 1; 29.11.05 14017 Tape Tape Width A max. N W1 min. W2 max. W3 min. Reel mm mm mm mm. mm mm W3 max. mm #1 16 180 60 16.4 22.4 15.9 19.4 #2 16 330 50 16.4 22.4 15.9 19.4 #3 24 330 60 24.4 30.4 23.9 27.4 #4 12 330 50 12.4 22.4 11.9 15.4 (According EN 60286-3: 1998) Leader and Trailer Dimensions in mm Trailer no devices Leader devices no devices End Start min. 200 min. 400 96 11818 Figure 13. Leader and Trailer Cover Tape Peel Strength According to IEC 286 Peel Strength: 0.1 N to 1.3 N (300 ± 10 %) mm/min 165° το 180° peel angle Document Number: 82601 Rev. 1.9, 20-Feb-09 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 5 Taping, Labeling, Storage, Packing and Marking Vishay Semiconductors Tape Dimensions in mm 19783 Figure 14. Tape for 1.6 - mm Package Side View Oriented 20872 Figure 15. Tape for 1.6 - mm Package Side View Oriented for TR-4 Version www.vishay.com 6 For technical questions within your region, please contact one of the following: Document Number: 82601 [email protected], [email protected], [email protected] Rev. 1.9, 20-Feb-09 Taping, Labeling, Storage, Packing and Marking Vishay Semiconductors 19613 Figure 16. Tape for 1.9 - mm Package Side View Oriented 20416 Figure 17. Tape for 1.9 - mm Package Top View Oriented Document Number: 82601 Rev. 1.9, 20-Feb-09 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 7 Taping, Labeling, Storage, Packing and Marking Vishay Semiconductors 19856 Drawing-No.: 9.700-5279.01-4 Issue: 1; 08.12.04 19856 Figure 18. Tape for 2.5 - mm Package Side View Oriented Drawing-No.: 9.700-5280.01-4 Issue: 1; 03.11.03 19855 Figure 19. Tape for 2.5 - mm Package Top View Oriented www.vishay.com 8 For technical questions within your region, please contact one of the following: Document Number: 82601 [email protected], [email protected], [email protected] Rev. 1.9, 20-Feb-09 Taping, Labeling, Storage, Packing and Marking Vishay Semiconductors 19805 Figure 20. Tape for 2.74 - mm Package Side View Oriented Drawing-No.: 9.700-5227.01-4 Issue: 3; 03.09.99 19870 Figure 21. Tape for 2.75 - mm Package Side View Oriented Document Number: 82601 Rev. 1.9, 20-Feb-09 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 9 Taping, Labeling, Storage, Packing and Marking Vishay Semiconductors 19875 Figure 22. Tape for 4.0 - mm Package Side View Oriented Drawing-No.: 9.700-5251.01-4 Issue: 3; 02.09.05 19824 Figure 23. Tape for 4.0 - mm Package Top View Oriented www.vishay.com 10 For technical questions within your region, please contact one of the following: Document Number: 82601 [email protected], [email protected], [email protected] Rev. 1.9, 20-Feb-09 Taping, Labeling, Storage, Packing and Marking Vishay Semiconductors 18241 Figure 24. Tape for SO - 16 Package Top View Oriented 20798 Figure 25. Tape for QFN20-4, 4 mm x 4 mm Document Number: 82601 Rev. 1.9, 20-Feb-09 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 11 Taping, Labeling, Storage, Packing and Marking Vishay Semiconductors 7.1 4° max 3.1 0.32 . Emitter 2 Detector 8° ma x. 4 2 Progressive direction 8 technical drawings according to DIN specifications 2 Ø 1.5 Ø 1.5 7.5 1.75 16 Drawing-No.: 9.700-5340.01-4 Issue: 1; 15.01.09 21663 Figure 26. Tape for 1.6 - mm Package Top View Oriented Marking of Transceiver Modules Date code 6 1 0 0 V Y W W X X Package 2: no specific Selection Vishay Year Type 4: 115 kbit/s, SIR Work week Manufacturing 5: 1 Mbit/s, MIR location 0: Standard, SMD 6: 4 Mbit/s, FIR 3: DIL, Through Hole 7: RC - Receiver added Note: V and XX are optional and 8: 16 Mbit/s, VFIR can be omitted when the space for marking is limited 1: 4 mm (leadframe) 2: 2.75 mm (leadframe) Example: 3: 2.5 mm (leadframe) The marking 4650V61268 6: PCB-based identifies a 7: PCB-based, 6 pin 17273-1 TFBS4650, produced by Vishay in week 12 of year 2006 at the location 68 (Krubong, Malaysia) www.vishay.com 12 For technical questions within your region, please contact one of the following: Document Number: 82601 [email protected], [email protected], [email protected] Rev. 1.9, 20-Feb-09