DC-DC PCB MOUNTED CONVERTERS & POWER MODULES PBKAM10 Series 136 1 0 W AT T S - A C / D C P O W E R M O D U L E S I N G L E & M U LT I P L E O U T P U T FEATURES • AC/DC power module • Universal input 85 ~ 265 VAC • High efficiency up to 79% • Short circut protection • Internal input filter • 71°C operation temperature SPECIFICATIONS INPUT Temperature coefficient +0.03%°C Input voltage 85-265VAC Cooling Free air convection Input voltage range AC in 85 - 265VAC Dimension L76.2 x W50.8 x H22.8 Switching frequency 100KHz MTBF Bellcore Issue 6 at 40°C, GB Weight 160g DC in 120 - 375 Rated input current Vi: 115 VAC, lo nom 180-350mA Line frequency Vi nom, lo nom 47-63Hz Inrush current Vi: 115/230 VAC, lo nom 10/18A Leakage current Input-Output 0.25mA STANDARDS Safety standards UL/cUL UL 60950-1 Recognised TUV EN 60950-1, CB Scheme AS/NZ CISPR11 Group 1, Class A CE EN 61000-6-3, EN 55022 Class B, EN 610003-2, EN 61000-3-3, EN 61000-6-2, EN 55024 OUTPUT Voltage range Minimum load Line regulation See Table Vi nom, Single Output Models 0% Vi nom, Multiple Output Models 20% Lo nom, Vi min to Vi max + 1% Load regulation Vi nom, single Output Models + 2% Vi nom, Multiple Output Models + 2% Hold up time Vi: 115/230 VAC, lo nom 15/30 ms Vi nom, lo nom, BW = 20MHz 3.3V & 5V 100mV 12V, 15V, 24V and Dual 150mV Model Dependant up to 78% Rippple and noise Efficiency ENVIRONMENTAL C-Tick EMC standards SELECTION TABLE MODEL NUMBER OUTPUT POWER SINGLE OUTPUT PBKAM1003 + 3.3 V 3000 mA 10W PBKAM1005 + 5V 2000 mA 10W PBKAM1012 +12V 840 mA 10W PBKAM1015 +15V 670 mA 10W PBKAM1024 +24V 420 mA 10W +12V +420mA 10W +15V +335mA 10W Storage temperature Non operational -40 to +100°C Relative humidity Vi nom, lo nom 20-95% RH Isolation voltage Input-Output at 3000/4242 VAC/VDC PBKAM1012D Ambient temperature Operating at Vi nom, lo nom -40 to +71°C PBKAM1015D Derating Vi nom, from +51°C to +71°C 2% / °C PBKAM10503D MULTIPLE OUTPUT +5 / +3.3V +0.8A/+2A 10W MECHANISM & PIN CONFIGURATION Doc. No. PBC9 Rev.C 28-4-11