CSA 60950-1

Descriptive Report
and Test Results
MASTER CONTRACT: 231746
REPORT: 1953207
PROJECT: 2164653
Edition 1:
October 9, 2007; Project 1953207 - Montreal
Issued by Eric Fortier, Eng.
Edition 3:
April 29, 2009; Project 2164653 - Toronto
Prepared by David Chen; Reviewed by Jupiter Huang
Report pages reissued
Contents:
Certificate of Compliance - Page 1 to 2
Supplement to Certificate of Compliance - Page 1
Description and Tests - Pages 1 to 10
Att1 Photos - 1 to 4
SIQ CB certificate (SI-1862) dated 2007-5-4 + Test reports, 116 pages
PRODUCTS
CLASS 5311 07 - POWER SUPPLIES - Component Type (CSA 60950-1-03)
CLASS 5311 87 - POWER SUPPLIES - Component Type - Certified to US Stds. (CSA 60950-1-03/UL 60950-1,
First Edition, NRTL Program)
• DC to DC Converters*, PCB Mount, Models and rating as follow:
Rating Model MIHW series:
MIHW 100x: Input: 4.5 – 9.0Vdc / 820mA
MIHW 100x: Input: 9 – 18.0Vdc / 320mA
MIHW 100x: Input: 18 – 36.0Vdc / 155mA
MIHW 100x: Input: 36 – 75.0Vdc / 80mA
x stands for output rating
2…5Vdc / 600mA
3…12Vdc / 250mA
8…24Vdc / 125mA
6…±12Vdc / ±125mA
7…±15Vdc / ±100mA
Rating Model MIW, DIW series:
MIW232x, DIW232x: Input: 9 – 36Vdc / 150mA
MIW233x, DIW233x: Input: 18 – 75Vdc / 75mA
x stands for output rating
1…3.3Vdc/750mA
2…5Vdc / 600mA
3…12Vdc / 250mA
4…15Vdc / 200mA
6…±12Vdc / ±125mA
7…±15Vdc / ±100mA
This report shall not be reproduced, except in full, without the approval of CSA International.
CTS-49
DQD 507.10 Rev. 2008-11-28
MASTER CONTRACT: 231746
REPORT: 1953207
PROJECT: 2164653
Rating Model MSKW, DSKW series:
MSKW202x, DSKW202x: Input: 9 – 18Vdc / 500mA
MSKW203x, DSKW203x: Input: 18 – 36Vdc / 250mA
MSKW204x, DSKW204x: Input: 36 – 75Vdc / 125mA
Page No: 2
Date Issued: April 29, 2009
x stands for output rating
1…3.3Vdc / 1200mA
2…5Vdc / 1000mA
3…12Vdc / 420mA
4…15Vdc / 335mA
5…±5Vdc / ±500mA
6…±12Vdc / ±210mA
7…±15Vdc / ±165mA
*Notes:
!"Units were evaluated as components where the suitability of the combination with the host equipment shall
be re-evaluated.
!"The equipment has been evaluated for use in a Pollution Degree1 or 2 and over voltage category II
environment.
!"A suitable Mechanical, Electrical and Fire enclosure shall be provided.
!"The product is specified for maximum ambient of 70°C
!"The separation between input and output is functional for model MSKW and MIW and reinforced insulation
for model MIHW
BI-NAT CSA 60950-1-03/UL 60950-1, 1st Edition DESIGN MANUAL, REV 2.1 (ISSUED WITH REPORT
231746-1708682) IS AN INTEGRAL PART OF THIS REPORT
CTS-49
DQD 507.10 Rev. 2008-11-28