Document 160-1 Chip Inductors – 1008HS (2520) Coilcraft “HS” series chip inductors have been designed especially for the needs of today’s high frequency designer. Their ceramic construction delivers the highest possible Part number1 1008HS-100T_L_ 1008HS-120T_L_ 1008HS-150T_L_ 1008HS-180T_L_ 1008HS-220T_L_ 1008HS-270T_L_ 1008HS-330T_L_ 1008HS-390T_L_ 1008HS-470T_L_ 1008HS-560T_L_ 1008HS-680T_L_ 1008HS-820T_L_ 1008HS-101T_L_ 1008HS-121T_L_ 1008HS-151T_L_ 1008HS-181T_L_ 1008HS-221T_L_ 1008HS-271T_L_ 1008HS-331T_L_ 1008HS-391T_L_ 1008HS-471T_L_ 1008HS-561T_L_ 1008HS-621T_L_ 1008HS-681T_L_ 1008HS-751T_L_ 1008HS-821T_L_ 1008HS-911T_L_ 1008HS-102T_L_ Inductance2 (nH) 10 @ 50 MHz 12 @ 50 MHz 15 @ 50 MHz 18 @ 50 MHz 22 @ 50 MHz 27 @ 50 MHz 33 @ 50 MHz 39 @ 50 MHz 47 @ 50 MHz 56 @ 50 MHz 68 @ 50 MHz 82 @ 50 MHz 100 @ 25 MHz 120 @ 25 MHz 150 @ 25 MHz 180 @ 25 MHz 220 @ 25 MHz 270 @ 25 MHz 330 @ 25 MHz 390 @ 25 MHz 470 @ 25 MHz 560 @ 25 MHz 620 @ 25 MHz 680 @ 25 MHz 750 @ 25 MHz 820 @ 25 MHz 910 @ 25 MHz 1000 @ 25 MHz SRF and excellent Q values. The non-magnetic coilform also ensures the utmost in thermal stability, predictability and batch consistency. SRF min5 Percent DCR max6 Irms7 (MHz) (Ohms)(mA) tolerance3 Q min4 5 5 5 5 5 5,2 5,2 5,2 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2 1. When ordering, specify tolerance, termination and packaging codes: 1008HS-102TGLC Tolerance: F =1% G = 2% J = 5% (Table shows stock tolerances in bold.) Termination:L=RoHS compliant silver-palladium-platinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging:C =7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D =13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel). 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP 4286A impedance analyzer with Coilcraft-provided correlation pieces. 3. Tolerances in bold are stocked for immediate shipment. 50 @ 500 MHz 50 @ 500 MHz 50 @ 500 MHz 50 @ 350 MHz 55 @ 350 MHz 55 @ 350 MHz 60 @ 350 MHz 60 @ 350 MHz 65 @ 350 MHz 65 @ 350 MHz 65 @ 350 MHz 60 @ 350 MHz 60 @ 350 MHz 60 @ 350 MHz 45 @ 100 MHz 45 @ 100 MHz 45 @ 100 MHz 45 @ 100 MHz 45 @ 100 MHz 45 @ 100 MHz 45 @ 100 MHz 45 @ 100 MHz 45 @ 100 MHz 45 @ 100 MHz 45 @ 100 MHz 45 @ 100 MHz 35 @ 50 MHz 35 @ 50 MHz 4100 3300 2500 2500 2400 1600 1600 1500 1500 1300 1300 1000 1000 950 850 750 700 600 570 500 450 415 375 375 360 350 320 290 0.08 0.09 0.10 0.11 0.12 0.13 0.14 0.15 0.16 0.18 0.20 0.22 0.56 0.63 0.70 0.77 0.84 0.91 1.05 1.12 1.19 1.33 1.40 1.47 1.54 1.61 1.68 1.75 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 650 650 580 620 500 500 450 470 470 400 300 400 360 400 380 370 4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture. 5. SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture. 6. DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF840 test fixture. 7.Current that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. 8. Electrical specifications at 25°C. 9. Temperature coefficient of inductance: +25 to +125 ppm/°C. For part marking data, please visit http://www.coilcraft.com/colrcode.cfm. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Document 160-1 Revised 10/12/15 Document 160-2 1008HS Series (2520) Typical Q vs Frequency 100 Core material Ceramic Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 28.3 – 31.5 mg Ambient temperature –40°C to +125°C with Irms current Maximum part temperature +140°C (ambient + temp rise). Storage temperature Component: –40°C to +140°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 Packaging 2000/7″reel; 7500/13″ reel Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.3 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. 47 nH 90 80 100 nH 12 nH Q factor 70 330 nH 60 750 nH 50 40 30 20 10 B overall 0 10 100 1000 10000 Frequency (MHz) A Typical L vs Frequency F I G J F E terminal 1000 750 nH A max 800 B max I Terminal wraparound: approx 0.015/0,38 both ends 900 C max E F G Recommended Land Pattern H IJ 0.1050.095 0.070 0.0800.0200.0600.1000.0400.050 inches 700 Inductance (nH) H C 2,672,41 1,78 2,030,511,522,541,021,27mm 600 Note: Height dimension is before optional solder application. For maximum height dimension including solder, add 0.006 in / 0,152 mm. 500 400 330 nH 300 200 100 nH 47 nH 100 0 1 12 nH 10 100 1000 10000 Frequency (MHz) Document 160-2 Revised 10/12/15