4310LC

Document 878-1
Wideband Bias Chokes – 4310LC
• Flat bandwidth with high impedance to 6 GHz
• Low DCR and excellent current handling
• Ideal for use in high current bias Tee applications
Core material Ferrite
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver (96.5/3.5) over copper.
Other terminations available at additional cost.
Weight 0.42 g
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 350/7″ reel,1500/13″ reel; Plastic tape: 24 mm wide,
0.3 mm thick, 12 mm pocket spacing, 3.5 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Part number1
4310LC-132KE_
4310LC-352KE_
Inductance2
±10% (µH)
1.30
3.50
SRF
(typ)3
(MHz)
235
188
1. When ordering, please specify packaging code:
4310LC-132KEC
Packaging:C
=7″ machine-ready reel. EIA-481 embossed plastic
tape (350 parts per full reel).
B=Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D
=13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (1500 parts per
full reel).
0.460
max
11,68
Strip
Length
DCR
(max)4
(mOhm)
15.1
49.0
5
Irms (A)
20°C rise 40°C rise
2.7
2.3
2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP
16193 fixture in Agilent/HP 4284A impedance analyzer. or equivalents.
3. SRF measured using Agilent/HP 8753D network analyzer or equivalent
and a Coilcraft SMD-F test fixture.
4. DCR measured on Keithley 580 micro-ohmmeter or equivalent.
5. Current that causes the specified temperature rise from 25°C ambient.
Because of their open construction, these parts will not saturate.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.050
1,27
0.030
0,76
0.110
2,79
135°
max
0.130
3,30
Recommended
Land Pattern
0.420 ±0.015
10,67 ±0,381
0° min
4.2
3.1
0.420
10,67
0.130 ±0.010
3,30 ±0,254
0.190 ±0.030
4,826 ±0,76
Dimensions are in
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
inches
mm
Document 878-1 Revised 01/03/12
© Coilcraft Inc. 2014
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 878-2
Wideband Bias Chokes – 4310LC
Insertion Loss (Ref: 50 Ohms)
Impedance vs Frequency
0
1
-352
-132
2
3
S21 (dB)
4
5
6
7
8
9
10
11
12
1
10
1000
100
10000
Frequency (MHz)
Insertion loss measured in a bias tee configuration with an Agilent/HP 8753ES
network analyzer.
Port 2
120
110
100
90
80
70
60
50
40
25°C
Percent of rated Irms
Port 1
Irms Derating
30
20
10
0
-40
-20
0
20
40
60
80
100
120 140
Ambient temperature (°C)
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 878-2 Revised 01/03/12
© Coilcraft Inc. 2014
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.