Z-BLOCKER® Z-230PJ xDSL over POTS In-Line Filter Description The Z-230PJ is a small in-line filter designed to expedite the service delivery and improve the performance of digital subscriber line (DSL) and home phoneline network (HPN) services. This model fits all telephone sets, facsimile machines, answering machines, etc. individually or in groups on line 1 only. Our in-line DSL filter design electronically isolates the high-speed DSL and HPN data streams from the voice band plain old telephone service (POTS) equipment. This design effectively blocks the DSL, and HPN up to 30 Megahertz. Features ● Isolates telephone equipment impedances from the xDSL and HPN systems ● Attenuate xDSL & HPN signals to phone equipment to prevent conversion to voice band signals ● Attenuate HPN signals to unbalanced phone equipment to prevent radiation into electronic equipment ● Minimize voice band interference transmission, signaling and supervision ● Compatible with all major xDSL standards ● RoHS Compliant ● Compliant and listed with UL 60950, FCC Part 68 Z-230PJ In-Line xDSL over POTS Filter Applications The Z-230PJ filters are used with other Z-BLOCKER® filters distributed throughout the subscribers' premises to isolate all voice band equipment devices such as corded/cordless telephones, answering machines, fax machines, 56Kb/s and lower rate modems, automatic dialers, recorder connectors and satellite television set-top boxes. The Z-230PJ in-line DSL filter is one of many filters manufactured by Excelsus for subscriber installed digital services within homes, offices, and hotels. Excelsus is the number one selling brand of DSL filters worldwide. ● CE certified RJ11-JACK RJ11-PLUG LINE 6 5 4 3 2 1 6 5 4 3 2 1 PHONE Z-230PJ Block Schematic www.PulseElectronics.com EX110.C (02/12) Z-BLOCKER® Z-230PJ xDSL over POTS In-Line Filter Z-BLOCKER® Z-230PJ Filter Specifications Line side differential input blocking impedance At 20 kHz >2k At 30 kHz >3k From 5 MHz to 10 MHz >2k 1 kHz insertion loss between 600 Ω resistive Single filter <0.4 With 5 filters <0.6 1 kHz/2.8 kHz slope between 600 Ω resistive Single filter <0.1 With 5 filters <1.1 DC resistance in Ohms Tip to Tip, and Ring to Ring <12 Tip to Ring >10M Longitudinal Balance per IEEE method From 200 - 1 kHz >58 dB From 1 kHz - 3 kHz >53 dB Common mode rejection at 40 kHz and 30 MHz >45dB Low pass roll off (slope) between 600 Ohm and ADSL Transmission Unit - Remote >26dB Inter-Modulation Distortion First and Second order products >60dB Envelope Delay 300 Hz - 2800 Hz <100μs 600Ω Return Loss into phone side with 600Ω line termination with ATU-R Single filter SRL Low >30dB ERL >14dB SRL High >17dB +2 bridged filter SRL Low >36dB ERL >23dB SRL High >13dB +4 bridged filter SRL Low >26dB ERL >15dB SRL High >8dB Complex* Return Loss with ATU-R Single filter SRL Low >27dB Single filter ERL >14dB Single filter SRL High >6dB +2 bridged filters SRL Low >19dB ERL >14dB SRL High >3dB +4 bridged filters SRL Low >15dB ERL >7dB SRL High >2dB * 1330Ω in parallel with (100nfd in series with 348Ω) DC Loop Current - Meets specifications between 20 and 100 milliamps DC Connectors: RJ-11 Jack and RJ-11 Plug RJ11 pins have ≥50 micro-inches of gold plating over ≥100 micro-inches of nickel plating Dimensions: Length 2.12in (54mm), Width 1.21in (30.85mm), Height 0.72in (18.34mm), Cable Length = 3.78in (96mm) ± 1.0 mm on outline dimension. ±10.0 mm on length of cable Compliant and listed with UL / CSA 60950, FCC CFR 47 Part 68 Pulse Singapore - 135 Joo Seng Rd.#03-02PM Industrial Bldg.Singapore 368363 Tel: +65 6287 8998 Pulse Taiwan - 3F, #198, Zhongyuan Rd., Zhongli City Taoyuan, County 32068, Taiwan Tel: +886 3435 6768 Pulse US - 12220 World Trade Drive, San Diego, CA. 92128 Tel: +1 858 674 8100 www.pulseelectronics.com Specifications subject to change without notice. Excelsus is a registered trade mark of Pulse Electronics. © 2012 Pulse Electronics. EX110.C (02/12)