AGP4233

Document 917-1
Power Inductors – AGP4233
• AEC-Q200 Grade 1 qualified
• Designed for high current power supply applications
• Flat wire windings provide extremely low DC and AC resistance.
• Shield has solderable tabs for additional mounting stability.
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver over copper
Shield tabs RoHS compliant bright tin over nickel over stainless steel
Weight 135 g
Ambient temperature –40°C to +125°C with Irms current
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +165°C.
Tray packaging: –40°C to +80°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 9 parts per tray
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Part number
Inductance1
±20% (µH)
AGP4233-682ME
AGP4233-103ME
AGP4233-153ME
AGP4233-223ME
AGP4233-333ME
AGP4233-473ME
AGP4233-683ME
AGP4233-104ME
AGP4233-154ME
AGP4233-224ME
AGP4233-334ME
AGP4233-474ME
6.8
10
15
22
33
47
68
100
150
220
330
470
DCR
(mOhms)2 SRF typ
nom max
(MHz)
10% drop
2.802.95
2.802.95
2.802.95
2.802.95
2.802.95
2.802.95
2.802.95
2.802.95
2.802.95
10.511.5
10.511.5
10.511.5
21.7
18.8
15.2
12.0
10.0
8.5
6.4
5.2
4.2
5.0
4.1
3.6
92.0
56.0
45.0
32.8
22.5
16.0
10.6
6.88
4.18
6.40
4.20
2.60
Isat
(A)3
20% drop 30% drop
97.8 101.8
60.0 63.0
47.0 49.0
35.4 36.6
24.7 25.8
17.6 18.6
12.2 13.0
7.80 8.36
4.96 5.40
7.20 7.60
4.70 5.00
3.20 3.40
Irms
(A)4
20°C rise 40°C rise
24
34
24
34
24
34
24
34
24
34
2434
2434
2434
2434
12.417.5
12.417.5
12.417.5
1. Inductance tested at 100 kHz, 0.1 Vrms on Agilent/HP 4192A.
2. DCR measured on a Keithley 580 micro-ohmmeter or equivalent.
3. DC current at 25°C that causes the specified inductance drop from its value without current. Click for temperature derating information.
4. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information.
Temperature rise of the core is usually less than that of the winding.
When Irms is greater than Isat, Isat is the more critical specification and Irms is shown in gray type.
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 917-1 Revised 12/12/14
Document 917-2
Power Inductors – AGP4233 Series
Typical L vs Current
Typical L vs Frequency
Document 917-2 Revised 12/12/14
Document 917-3
Power Inductors – AGP4233 Series
6.8 – 150 µH
220 – 470 µH
AGP4233-XXXME
AGP4233-XXXME
1.41 ± 0.04
35,8 ±1,0
1.41 ± 0.04
35,8 ±1,0
XXXX X
XXXX X
Internal code
1.66 ± 0.04
42,2 ±1,0
Internal code
1.66 ± 0.04
42,2 ±1,0
1.10 max
28,0
1.10 max
28,0
0.059
1,50
0.020
0,50
Cover tabs provided for
mounting stability only.
0.246
6,25
0.209 max
5,3
0.150
3,80
0.032
0,82
0.020
0,50
Cover tabs provided for
mounting stability only.
0.364 0.364
9,25 9,25
CL
CL
0.689
17,5 0.443
11,25
0.364 0.364
9,25 9,25
0.039
1,00
0.266
6,75
Dimensions are in
inches
mm
CL
0.079
2,00
0.443
0.689 11,25
17,5
0.246
6,25
0.209 max
5,3
0.150
3,80
Recommended
PC board layout
0.689
17,5
0.156
3,95
CL
0.689
17,5 0.413
10,5
0.039
1,00
0.061
1,54
0.413
10,5
0.266
6,75
Dimensions are in
inches
mm
0.156
3,95
Recommended
PC board layout
Document 917-3 Revised 12/12/14